1-1-Functional Components.pptx BCA sem 1 Computer Fundamentals

 The word computer comes from the word
“compute”, which means, “to calculate”
 A computer is an electronic device that can
perform arithmetic operations at high speed
 A computer is also called a data processor
because it can store, process, and retrieve data
whenever desired
Computer

Data Processing
The activity of processing data using a computer is
called
data processing
Data
Capture Data
Manipulate Data
Output Results
Information
Data is raw material used as input and information is processed
data obtained as output of data processing

1) Automatic: without human interventions
2) Speed: usually measured in microseconds
(10-6), nanoseconds (10-9), and
picoseconds (10-12)
3) Accuracy: high and the degree of its
accuracy depends upon its design.
Characteristics of Computers

4)Diligence: free from monotony, tiredness,
and lack of concentration.
5)Versatility: perform almost any task, if the
task can be reduced to a finite series of
logical steps
6)Power of Remembering: store and recall

7)No I.Q.: cannot take its own decision
8)No Feelings: no emotions

Electronic Devices Used in Computers of
Different Generations
(c) An IC Chip
(b) A Transistor
(a) A Vacuum Tube

 Inputting. The process of entering data and instructions
into the computer system
 Storing. Saving data and instructions to make them
readily available for initial or additional processing
whenever required
 Processing. Performing arithmetic operations (add,
subtract, multiply, divide, etc.) or logical operations
(comparisons like equal to, less than, greater than, etc.)
on data to convert them into useful information
The Five Basic Operations of a
Computer System

 Outputting. The process of producing
useful information or results for the user
such as a printed report or visual display
 Controlling. Directing the manner and
sequence in which all of the above
operations are performed
The Five Basic Operations of a
Computer System

Basic Organization of a
Computer
Central Processing Unit (CPU)
Storage Unit
Secondary
Storage
Primary
Storage
Control
Unit
Arithmetic
Logic
Unit
Input
Unit
Output
Unit
Program
and
Data
Information
(Results)
Indicates flow of
instructions and data
Indicates the control
exercised by the
control unit

1. It accepts (or reads) instructions and data
from outside world
2. It converts these instructions and data
in computer acceptable form
3. It supplies the converted instructions and
data to the computer system for further
processing
Input Unit

1. It accepts the results produced by the
computer, which are in coded form and
hence, cannot be easily understood by us
2. It converts these coded results to human
acceptable (readable) form
3. It supplies the converted results to
outside world
Output Unit

1. Data and instructions required for
processing (received from input devices)
2. Intermediate results of processing
3. Final results of processing, before they are
released to an output device
Storage Unit

 Primary storage
 Used to hold running program instructions
 Used to hold data, intermediate results, and
results of ongoing processing of job(s)
 Fast in operation
 Small Capacity
 Expensive
 Volatile (looses data on power dissipation)
Two Types of Storage

 Secondary storage
 Used to hold stored program instructions
 Used to hold data and information of stored jobs
 Slower than primary storage
 Large Capacity
 Lot cheaper that primary storage
 Retains data even without power
Two Types of Storage

 Place where the actual executions of
instructions takes place during processing
operation
Arithmetic Logic Unit (ALU)

 Manages and coordinates the operations of
all other components of the computer
system
Control Unit (CU)

 It is the brain of a computer system
 It is responsible for controlling the
operations of all other units of a computer
system
Central Processing Unit (CPU)
Arithmetic
Logic
Unit
(ALU)
Control Unit
(CU)
=
Central
Processing
Unit
(CPU)
+

1. A system has more than one element
2. All elements of a system are logically related
3. All elements of a system are controlled in a
manner to achieve the system goal
A computer is a system as it comprises of integrated
components (input unit, output unit, storage unit,
and CPU) that work together to perform the steps
called for in the executing program
The System Concept

1-1-Functional Components.pptx BCA sem 1 Computer Fundamentals

More Related Content

Similar to 1-1-Functional Components.pptx BCA sem 1 Computer Fundamentals (20)

Recently uploaded (20)

1-1-Functional Components.pptx BCA sem 1 Computer Fundamentals