101 2.4b use debian package management v2

CoreLinuxforRedHatandFedoralearningunderGNUFreeDocumentationLicense-Copyleft(c)AcácioOliveira2012
Everyoneispermittedtocopyanddistributeverbatimcopiesofthislicensedocument,changingisallowed
Linux Essenciais and System Administration

Key Knowledge Areas
Install, upgrade and uninstall Debian binary packages.
Find packages containing specific files or libraries which may or may not be installed.
Obtain package information like version, content, dependencies, package integrity and
installation status (whether or not the package is installed).
Linux Installation and Package Management
Use Debian package management
Terms and Utilities
/etc/apt/sources.list
dpkg
dpkg-reconfigure
apt-get
apt-cache
aptitude
2

Debian package management
The Debian distribution uses a different packaging system than Red Hat uses.
The Debian system is often considered to be more powerful and robust.
The 4 pieces of the system used most often are:
dpkg dselect apt-get alien
Overview
3
Debian packages, or debs, contain binary files to be installed with info known as metadata.
Metadata holds info on: package, scripts executed, dependencies, conflicts, or suggestions.
Debian package naming scheme:
package_version-build_architecture.deb
•package: name of the application being installed.
•version: version number of the application.
•build: build number of the package. Each time the package is redone this number is incremented.
•architecture: platform the package was compiled for.
There’s a special type of package known as a task package.
These packages are empty packages without software, but with dependencies. Used to install a large “task” on the system.
http://www.debian.org/distrib/packages

Using dpkg
4
Installing packages: dpkg --install package_file.deb or dpkg -i package_file.deb
debian:~# dpkg --install ethereal_0.8.13-2_i386.deb
Selecting previously deselected package ethereal.
(Reading database ... 54478 files and directories currently
installed.)
Unpacking ethereal (from ethereal_0.8.13-2_i386.deb) ...
dpkg: dependency problems prevent configuration of ethereal:
ethereal depends on libpcap0 (>= 0.4-1); however:
Package libpcap0 is not installed.
dpkg: error processing ethereal (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
Ethereal
Ex:
dpkg checks the package for needed dependencies and displays an error if they are not installed.
ethereal_0.8.13-2_i386.deb requires the libpcap0 package to be installed.
debian:~# dpkg --install ethereal_0.8.13-2_i386.deb libpcap0_0.4a6-3_i386.deb
(Reading database ... 54499 files and directories currently
installed.)
Preparing to replace ethereal 0.8.13-2 (using
ethereal_0.8.13-2_i386.deb) ...
Unpacking replacement ethereal ...
Selecting previously deselected package libpcap0.
Unpacking libpcap0 (from libpcap0_0.4a6-3_i386.deb) ...
Setting up libpcap0 (0.4a6-3) ...
Setting up ethereal (0.8.13-2) ...

Using dpkg
5
Force options: To override an error when installing or removing a package.
Option Purpose
configure-any Configure any other package that may help to install this package.
hold Process another package, even if it is on hold.
bad-path Force even when missing files.
not-root Try to add or remove packages, even if not root.
overwrite Overwrite a file from a new package, even if it belongs to another package.
depends-version Normally an error is given if the correct version of a dependency is not installed.
This option makes that a warning instead.
depends Turn all dependency errors into warnings.
confnew Always use the newly installed configuration file.
confold Always use the old configuration file.
conflicts Allow packages that conflict to be installed.
overwrite-dir Overwrite another package’s directory with a new one.
remove-essential Remove essential system packages, dangerous.
debian:~# dpkg -install new_package.deb --force-conflictsEx:

Using dpkg
6
Removing packages: dpkg --remove package_name.deb or dpkg -r package_name.deb
debian:~# dpkg --remove libpcap0
dpkg: dependency problems prevent removal of libpcap0:
ethereal depends on libpcap0 (>= 0.4-1).
dpkg: error processing libpcap0 (--remove):
dependency problems - not removing
Errors were encountered while processing:
libpcap0
These cmds remove all package files, except for configuration files needed for a later reinstall.
To remove all files, including the configuration files, use purge option:
dpkg --purge package_name or dpkg -P package_name
Ex:

Using dpkg
7
Info on packages: dpkg --print-avail package_name or dpkg -p package_name
debian:~# dpkg --print-avail ethereal
Package: ethereal
Priority: optional
Section: net
Installed-Size: 2996
Maintainer: Frederic Peters <fpeters@debian.org>
Architecture: i386
Version: 0.8.13-2
Depends: libc6 (>= 2.1.94), libglib1.2 (>= 1.2.0), libgtk1.2
(>= 1.2.8-1), libpc
ap0 (>= 0.4-1), libsnmp4.1, xlibs (>= 4.0.1-1), zlib1g (>=
1:1.1.3)
Filename: dists/potato/main/binaryi386/
net/ethereal_0.8.0-1.deb
Size: 1201932
MD5sum: 78928ca734086acd72b441967bf24bc0
Description: Network traffic analyzer
Ethereal is a network traffic analyzer, or “sniffer”, for Unix
and
Unix-like operating systems. It uses GTK+, a graphical user
interface
library, and libpcap, a packet capture and filtering library.
Ex:

Using dpkg
8
listing packages: dpkg --list <pattern> or dpkg -l <pattern>
<pattern> is an optional search pattern. Without pattern dpkg will display every package available.
debian:/usr/doc/dpkg# dpkg --list apache*
Desired=Unknown/Install/Remove/Purge/Hold ## (Letter1)
| Status=Not/Installed/Config-files/Unpacked/Failedconfig/Half-installed ## (Letter2)
|/ Err?=(none)/Hold/Reinst-required/X=both-problems(Status,Err: uppercase=bad) ##
(Letter3)
||/ Name Version Description
+++-===============-===============-============================================
pn apache <none> (no description available)
pn apache-common <none> (no description available)
pn apache-dev <none> (no description available)
pn apache-doc <none> (no description available)
un apache-modules <none> (no description available)
pn apache-perl <none> (no description available)
pn apache-ssl <none> (no description available)
Ex:
Apache packages are listed, but none are installed. - However, several were installed but where purged and now are not installed.
3 columns on left: p - file has been purged; u - file is unpacked, n - file is not installed.
Left columns are documented by lines above file list. Letters correspond to the first letter of the information. Ex: i = installed, and h = half-installed.

Using dpkg
9
Status packages with full details: dpkg --status package_name or dpkg -s package_name
debian:~# dpkg -s ethereal
Package: ethereal
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2996
Maintainer: Frederic Peters <fpeters@debian.org>
Version: 0.8.13-2
Depends: libc6 (>= 2.1.94), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.8-1), libpc ap0 (>= 0.4-1),
libsnmp4.1, xlibs (>= 4.0.1-1), zlib1g (>= 1:1.1.3)
Description: Network traffic analyzer
Ethereal is a network traffic analyzer, or “sniffer”, for Unix and Unix-like operating systems.
It uses GTK+, a graphical user interface library, and libpcap, a packet capture and filtering
library.
Ex:

Using dpkg
10
List all files installed by package: dpkg --listfiles package_name or dpkg -L package_name
debian:~# dpkg --listfiles wget
/.
/usr
/usr/bin
/usr/bin/wget
...
/usr/share/doc/wget/copyright
/usr/share/doc/wget/changelog.gz
/usr/share/doc/wget/NEWS.gz
/usr/share/doc/wget/changelog.Debian.gz
/usr/share/doc-base
/usr/share/doc-base/wget
/etc
/etc/wgetrc
Ex:

Using dpkg
11
Displaying file ownership : dpkg --search package_name or dpkg -S package_name
To find out which package installed a certain file
debian:/etc# dpkg --search /etc/issue.net
base-files: /etc/issue.net
Ex:
/etc/issue.net file was installed by the base-files package.
debian:/etc# which java
/usr/bin/java
debian:/etc# ls -l $(which java)
lrwxrwxrwx 1 root root 22 2010-05-03 17:51 /usr/bin/java ->
/etc/alternatives/java
debian:/etc# update-alternatives --display java
java - auto mode
link currently points to /usr/lib/jvm/java-6-openjdk/jre/bin/java
/usr/lib/jvm/java-6-openjdk/jre/bin/java - priority 1061
slave java.1.gz: /usr/lib/jvm/java-6-openjdk/jre/man/man1/java.1.gz
Current `best' version is /usr/lib/jvm/java-6-openjdk/jre/bin/java
debian:/etc# dpkg -S /usr/lib/jvm/java-6-openjdk/jre/bin/java
openjdk-6-jre-headless: /usr/lib/jvm/java-6-openjdk/jre/bin/java
Ex:

Using dpkg
12
Checking available packages
Most of the info displayed and used by dpkg is stored in /var/lib/dpkg directory.
With 2 files of interest:
/var/lib/dpkg/available - lists available packages to choose from.
/var/lib/dpkg/status - shows status of installed packages.
debian:/var/lib/dpkg# more available
Package: telnet
Priority: standard
Section: net
Installed-Size: 176
Maintainer: Herbert Xu <herbert@debian.org>
Architecture: i386
Source: netkit-telnet
Version: 0.16-4
Replaces: netstd
Depends: libc6 (>= 2.1.2), libncurses5
Filename: dists/potato/main/binary-i386/net/telnet_0.16-4.deb
Size: 58826 .. // ..
Ex:
debian:/var/lib/dpkg# more status
Package: telnet
Status: install ok installed .. // ..

Using dselect
13
dselect tool is an overlay to dpkg that provides character-based graphical interface.
Ex:

Using dselect
14
dselect tool allows you to access packages from a variety of sources.
Usually only apt source is used - It can access many different source types and is very configurable.
Ex:

Using dselect
15
dselect Access methods:
Method Description
cdrom Install from a local CD-ROM drive. Does not have to be mounted.
nfs Install from an unmounted NFS server.
harddisk Install from a disk that is not already mounted.
mounted Install from any file system that is already mounted.
floppy Install from multiple floppy disks.
ftp Install from an FTP site.
apt Allows access from several different sources.
Update
Any time that an access method is changed or packages have changed, you need to run Update function
so that the package database is current.
This process goes to each source and compiles the complete list of packages, and dependencies.

Using dselect
16
Select – After package database has been updated, select packages for install.
Ex:

Using dselect
17
Ex:
Select – After package database has been updated, select packages for install.

Using dselect
18
Selection Keys
Key Function
+ Install selected package.
- Remove selected package.
= Place package on hold.
: Remove hold status on package.
/<pattern> Search using <pattern>.
Repeat last search.
O Cycle through sort options.
V Change status display.
X Exit abandoning changes.
Q Exit saving changes.

Using dselect
19
Ex:
Dependency/conflict resolution

Using apt-get
20
apt-get is cmdline tool with a lot of functionality of dselect, without the unneeded interface.
apt-get tool will automatically get a package list and needed dependencies.
Before apt-get can get packages to install, it has to know where to get them.
File /etc/apt/sources.list has the sources for packages. (Also used by apt source in dselect)
File format:
For Binary Packages and Source Packages: deb-src uri distribution component
- uri - Uniform Resource Identifier syntax: protocol://host/path
- host metods: cd-rom; File; http; ftp

Using apt-get
21
/etc/apt/sources.list
Ex: $ cat /etc/apt/sources.list
#deb cdrom:[Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)]/ karmic main
restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://us.archive.ubuntu.com/ubuntu/ karmic main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ karmic main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://us.archive.ubuntu.com/ubuntu/ karmic-updates main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ karmic-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://us.archive.ubuntu.com/ubuntu/ karmic universe
deb-src http://us.archive.ubuntu.com/ubuntu/ karmic universe
deb http://us.archive.ubuntu.com/ubuntu/ karmic-updates universe
deb-src http://us.archive.ubuntu.com/ubuntu/ karmic-updates universe

Using apt-get
22
Updating the available packages - apt-get update
Any time there’s changes to sources.list file.
apt-get will go to the list of sources and update the package database in the system.
Installing packages - apt-get install package_name
If apt-get installs a package, it first checks if has already been downloaded.
If not, apt-get goes to first source in list an retrieves the newest version and prompts the user for the
dependencies and installs them automatically.
Upgrading packages - apt-get upgrade
Upgrade all installed packages to their latest version in one step.
Always issue an apt-get update before doing an upgrade, so the package list is up-to-date.
APT-get options:

Using apt-get
23
Upgrading Linux distribution - apt-get dist-upgrade
Entire Linux distribution upgraded to new version, when one is released via apt-get tool.
Clearing the package archives - apt-get clean - apt-get autoclean
apt-get keeps a copy of all the deb file - installed packages in:
/var/cache/apt/archives and /var/cache/apt/archives/partial directories.
- Free space, and clear all files in directories: clean
- Free space, and clear only packages that are not current and cannot be downloaded again: autoclean
APT-get options:
Removing packages - apt-get remove package_name
Packages can be removed with apt-get or dpkg.

Using apt-get
24
APT-get other options:
Option Purpose
-h Display the apt-get help.
-q Display output for logging.
-qq No output except for errors.
-d Only download the packages to the archives directory; do not install them.
-y Answer Yes to all queries.
-f Continue even if integrity check fails. This is sometimes used to fix dependency issues.
-m Continue even if the packages can not be located.
-u Show a list of upgraded packages.
-b Build a source package after retrieving it.
-c=filename Read the specified configuration file.
-o=option Set a special configuration option.
-s Simulate the action only. This will display the information as if you have actually executed the process.
This is useful for testing purposes before you accidentally break anything.

APT configuration
25
apt-get config file is in /etc/apt/apt.conf
To edit default options to apt-get command, change the file /etc/apt/apt.conf
Use apt-config command, to interrogates the apt.conf file.

Using aptitude
26
aptitude is a front-end to Advanced Packaging Tool (APT).
displays lists of software packages and allows interactively install or remove.
Aptitude does not have Super Cow Powers.
In apt-get super cow powers can be found with apt-get moo.
Try issuing: aptitude -v moo, then aptitude -vv moo, then aptitude -vvv moo, then aptitude -vvvv moo, then aptitude -vvvvv moo,

Using aptitude
27
Ex:

Reconfiguring Debian packages
28
APT includes a capability called debconf, used to config packages after installation.
Packages that use this capability (not all do) can be reconfigured after installed.
use dpkg-reconfigure command.
Ex: $ dpkg-reconfigure keyboard-configuration

Reconfiguring Debian packages
29
Ex: $ apt-get install exim4 getmail4 spamassassin
$ dpkg-reconfigure exim4-config

Using alien
30
The alien tool converts packages between several different formats.
It can be used on any distribution.
Supported Formats: Debian .deb; Red Hat .rpm; Slackware .tgz; Stampede .slp
Syntax : alien [options] package
Option Alternate Purpose
-d --to-deb The default. Tells alien to create a .deb package
--patch=<filename> Only used with -d. Specifies the patch file to use.
--nopatch Only used with -d. Specifies that no patch file should be used.
-r --to-rpm Creates an RPM package.
-t --to-tgz Creates a Slackware .tgz package.
--to-slp Creates a Stampede package.
-i --install Installs the package after creation.
-g --generate Unpacks the package, but does notgenerate a new one.
-s --single Does the same as -g, but does not create the .orig directory.
-c --scripts Includes scripts in the new package.
-k --keep-version Does not change the version of the generated package.
--description= Sets the package’s description.
-h --help Shows the help options.
-v --version Shows the version of alien.

Using alien
31
convert the wget package to a .deb file for installEx:
debian:~# alien wget.rpm
-- Examining wget.rpm
-- Unpacking wget.rpm
1010 blocks
----
-- Automatic package debianization
-- Building the package wget_1.5.3-164_i386.deb
dh_testdir
# Nothing to do.
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
cp -a `ls |grep -v debian` debian/tmp
dh_installdocs
.. // ..
dh_builddeb
dpkg-deb: building package `wget’ in
`../wget_1.5.3-164_i386.deb’.
Generation of wget_1.5.3-164_i386.deb complete.
-- Successfully finished

Fim de sessão
32

101 2.4b use debian package management v2

More Related Content

What's hot (19)

Viewers also liked (6)

Similar to 101 2.4b use debian package management v2 (20)

More from Acácio Oliveira (20)

Recently uploaded (20)

101 2.4b use debian package management v2