101 Project Management Problems And How To Solve Them

American Management Association
NewYork • Atlanta • Brussels • Chicago • Mexico City • San Francisco
Shanghai •Tokyo •Toronto •Washington, D.C.
Practical Advice for Handling
Real-World Project Challenges
Tom Kendrick
Project
Management
Problems
101
and How to Solve Them

Bulk discounts available. For details visit: www.amacombooks.org/go/specialsales or
contact special sales:
Phone: 800-250-5308 • E-mail: specialsls@amanet.org
View all the AMACOM titles at: www.amacombooks.org
This publication is designed to provide accurate and authoritative information in regard to the subject
matter covered. It is sold with the understanding that the publisher is not engaged in rendering legal,
accounting, or other professional service. If legal advice or other expert assistance is required, the services
of a competent professional person should be sought.
‘‘PMI’’ and the PMI logo are service and trademarks of the Project Management Institute, Inc. which are
registered in the United States of America and other nations; ‘‘PMP’’ and the PMP logo are certification
marks of the Project Management Institute, Inc. which are registered in the United States of America and
other nations; ‘‘PMBOK’’, ‘‘PM Network’’, and ‘‘PMI Today’’ are trademarks of the Project Management
Institute, Inc. which are registered in the United States of America and other nations; ‘‘. . . building
professionalism in project management . . .’’ is a trade and service mark of the Project Management
Institute, Inc. which is registered in the United States of America and other nations; and the Project
Management Journal logo is a trademark of the Project Management Institute, Inc.
PMI did not participate in the development of this publication and has not reviewed the content for
accuracy. PMI does not endorse or otherwise sponsor this publication and makes no warranty, guarantee,
or representation, expressed or implied, as to its accuracy or content. PMI does not have any financial
interest in this publication, and has not contributed any financial resources.
Additionally, PMI makes no warranty, guarantee, or representation, express or implied, that the
successful completion of any activity or program, or the use of any product or publication, designed to
prepare candidates for the PMP
Certification Examination, will result in the completion or satisfaction of
any PMP
Certification eligibility requirement or standard.
Library of Congress Cataloging-in-Publication Data
Kendrick, Tom.
101 project management problems and how to solve them : practical advice for handling real-world
project challenges / Tom Kendrick.
p. cm.
Includes index.
ISBN-13: 978-0-8144-1557-3 (pbk.)
ISBN-10: 0-8144-1557-1 (pbk.)
1. Project management. I. Title. II. Title: One hundred one project management problems and
how to solve them. III. Title: One hundred and one project management problems and how to solve
them.
HD69.P75K4618 2011
658.4⬘04—dc22
2010015878
2011 Tom Kendrick
All rights reserved.
Printed in the United States of America.
This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or in
part, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of AMACOM, a division of American Management Association,
1601 Broadway, New York, NY 10019.
About AMA
American Management Association (www.amanet.org) is a world leader in talent development,
advancing the skills of individuals to drive business success. Our mission is to support the goals of
individuals and organizations through a complete range of products and services, including classroom
and virtual seminars, webcasts, webinars, podcasts, conferences, corporate and government solutions,
business books, and research. AMA’s approach to improving performance combines experiential
learning—learning through doing—with opportunities for ongoing professional growth at every step of
one’s career journey.
Printing number
10 9 8 7 6 5 4 3 2 1

To all the good project managers I have worked with,
from whom I have learned a great deal.
Also to all the bad project managers I have worked with,
from whom I have learned even more.

This page intentionally left blank

Contents
Introduction 1
Part 1: General 3
PROBLEM 1 What personality type fits best into project
management? 3
PROBLEM 2 What are the habits of successful project
managers? 5
PROBLEM 3 I’m an experienced individual contributor but
very new to project management. How do I get
my new project up and going? 7
PROBLEM 4 What are the most important responsibilities of a
project manager? 10
PROBLEM 5 What is the value of project management
certification? What about academic degrees in
project management? 12
PROBLEM 6 There are many project development
methodologies. What should I consider when
adopting standards such as the Project
Management Institute PMBOK
? 14
PROBLEM 7 What are the key considerations when
developing or revising a project life cycle? What
should I consider when choosing between
‘‘waterfall’’ and ‘‘cyclic’’ (or ‘‘agile’’) life cycles? 17
v

vi Contents
PROBLEM 8 How can I efficiently run mini-projects (less than
six months with few dedicated resources)? 21
PROBLEM 9 How rigid and formal should I be when running a
small project? 23
PROBLEM 10 How do I handle very repetitive projects, such as
product introductions? 25
PROBLEM 11 How should I manage short, complex, dynamic
projects? 27
PROBLEM 12 How do I balance good project management
practices with high pressure to ‘‘get it done’’?
How do I build organizational support for
effective project planning and management? 30
PROBLEM 13 How does project management differ between
hardware and software projects? 33
PROBLEM 14 How many projects can a project manager
realistically handle simultaneously? 35
PROBLEM 15 How do I handle my day-to-day tasks along with
managing a project? 37
PROBLEM 16 How do I develop and maintain supportive
sponsorship throughout a project? 40
PROBLEM 17 What can I do when my project loses its sponsor? 42
PROBLEM 18 How can I secure and retain adequate funding
throughout my project? 44
PROBLEM 19 Can the project management function be
outsourced? 46
PROBLEM 20 How can I ensure good project management
practices during organizational process changes? 48
PROBLEM 21 What is the best structure for program
management for ensuring satisfactory customer
results? 50

Contents vii
Part 2: Initiation 53
PROBLEM 22 How do I effectively manage customer
expectations? 53
PROBLEM 23 How can I reconcile competing regional/cross-
functional agendas? 56
PROBLEM 24 How should I effectively deal with contributor
hostility or reluctance during start-up? 59
PROBLEM 25 When is a project large enough to justify
investing in a two-day project launch? 62
PROBLEM 26 How do I establish control initially when my
project is huge? 64
PROBLEM 27 How should I initiate a new project with a new
team, or using a new technology? 67
PROBLEM 28 How should I evaluate and make ‘‘make vs. buy’’
project decisions? 69
PROBLEM 29 How can I quickly engage good contract workers? 72
PROBLEM 30 In a large project, when should I seek
commitment for overall funding? 74
PROBLEM 31 When working with extremely limited resources,
how can I get my project completed without
doing it all myself? 76
PROBLEM 32 How should I initiate a project that has a relatively
low priority? 78
PROBLEM 33 How should I organize my project management
information system (PMIS) to facilitate access and
avoid ‘‘too much data’’? 80
Part 3: Teamwork 83
PROBLEM 34 How can I organize my team for maximum
creativity, flexibility, and success? 83

viii Contents
PROBLEM 35 How can I work effectively with other project
teams and leaders who have very little project
management experience? 85
PROBLEM 36 How can I help team members recognize the
value of using project management processes? 87
PROBLEM 37 How do I keep people focused without hurting
morale? 90
PROBLEM 38 How can I involve my team in project
management activities without increasing
overhead? 92
PROBLEM 39 How can I manage and build teamwork on a
project team that includes geographically remote
contributors? 95
PROBLEM 40 How do I secure team buy-in on global projects? 97
PROBLEM 41 How can I best manage project contributors who
are contract staff? 99
PROBLEM 42 How do I cope with part-time team members with
conflicting assignments? 101
PROBLEM 43 How do I handle undependable contributors who
impede project progress? 103
PROBLEM 44 How should I manage informal communications
and ‘‘management by wandering around’’ on a
virtual, geographically distributed team? 105
PROBLEM 45 When should I delegate down? Delegate up? 108
PROBLEM 46 How can I best deal with project teams larger
than twenty? 111
Part 4: Planning 115
PROBLEM 47 What can I do to manage my schedule when my
project WBS becomes huge? 115

Contents ix
PROBLEM 48 How can I get meaningful commitment from
team members that ensures follow-through? 118
PROBLEM 49 As a project manager, what should I delegate and
what should I do myself? 121
PROBLEM 50 Who should estimate activity durations and costs? 123
PROBLEM 51 How do I improve the quality and accuracy of my
project estimates? 126
PROBLEM 52 What metrics will help me estimate project
activity durations and costs? 130
PROBLEM 53 How can I realistically estimate durations during
holidays and other times when productivity
decreases? 134
PROBLEM 54 How can I develop realistic schedules? 136
PROBLEM 55 How can I thoroughly identify and manage
external dependencies? 139
PROBLEM 56 How do I synchronize my project schedules with
several related partners and teams? 142
PROBLEM 57 How do I effectively plan and manage a project
that involves invention, investigation, or multiple
significant decisions? 145
PROBLEM 58 How should I manage adoption of new
technologies or processes in my projects? 148
PROBLEM 59 How should I plan to bring new people up to
speed during my projects? 151
PROBLEM 60 How can I resolve staff and resource
overcommitments? 153
PROBLEM 61 How can I minimize the impact of scarce,
specialized expertise I need for my project? 155
PROBLEM 62 What is the best approach for balancing resources
across several projects? 157

x Contents
PROBLEM 63 How can I minimize potential late-project testing
failures and deliverable evaluation issues? 159
PROBLEM 64 How do I anticipate and minimize project staff
turnover? 161
Part 5: Execution 163
PROBLEM 65 How can I avoid having too many meetings? 163
PROBLEM 66 How can I ensure owner follow-through on
project tasks and action items? 165
PROBLEM 67 How do I keep track of project details without
things falling through the cracks? 168
PROBLEM 68 How can I avoid having contributors game their
status metrics? 170
PROBLEM 69 What are the best ways to communicate project
status? 173
PROBLEM 70 How can I manage my project successfully
despite high-priority interruptions? 176
PROBLEM 71 What are the best project management
communication techniques for remote
contributors? 178
PROBLEM 72 How do I establish effective global
communications? What metrics can I use to track
communications? 180
PROBLEM 73 On fee-for-service projects, how do I balance
customer and organizational priorities? 183
PROBLEM 74 How do I survive a late-project work bulge,
ensuring both project completion and team
cohesion? 186
PROBLEM 75 How do I coordinate improvements and changes
to processes we are currently using on our
project? 189

Contents xi
Part 6: Control 191
PROBLEM 76 How much project documentation is enough? 191
PROBLEM 77 How can I ensure all members on my multi-site
team have all the information they need to do
their work? 193
PROBLEM 78 How can I manage overly constrained projects
effectively? 195
PROBLEM 79 How do I keep my project from slipping? If it does,
how do I recover its schedule? 199
PROBLEM 80 What are the best practices for managing
schedule changes? 201
PROBLEM 81 How can I effectively manage several small
projects that don’t seem to justify formal project
management procedures? 203
PROBLEM 82 What are good practices for managing complex,
multi-site projects? 205
PROBLEM 83 How do I best deal with time zone issues? 207
PROBLEM 84 How can I manage changes to the project
objective in the middle of my project? 209
PROBLEM 85 How should I respond to increased demands from
management after the project baseline has been
set? 212
PROBLEM 86 How can I avoid issues with new stakeholders,
especially on global projects? 214
PROBLEM 87 What should I do when team members fail to
complete tasks, citing ‘‘regular work’’ priorities? 217
PROBLEM 88 What is the best way to manage my project
through reorganizations, market shifts, or other
external changes? 219
PROBLEM 89 How should I deal with having too many decision
makers? 221

xii Contents
PROBLEM 90 How should I manage multi-site decision making? 224
PROBLEM 91 What can I do when people claim that they are
too busy to provide status updates? 226
PROBLEM 92 How can I effectively manage projects where the
staff is managed by others? 228
PROBLEM 93 How can I minimize unsatisfactory deliverable
and timing issues when outsourcing? 230
PROBLEM 94 How should I manage reviews for lengthy
projects? 232
PROBLEM 95 What should I do to establish control when taking
over a project where I was not involved in the
scoping or planning? 234
Part 7: Tools 237
PROBLEM 96 What should I consider when adopting
technology-based communication tools? 237
PROBLEM 97 How should I select and implement software tools
for project documentation, scheduling, and
planning? 241
PROBLEM 98 What should I consider when setting up software
tools I will be using to coordinate many
interrelated projects? 243
Part 8: Closing 247
PROBLEM 99 How should I realistically assess the success and
value of my project management processes? 247
PROBLEM 100 What are good practices for ending a canceled
project? 249
PROBLEM 101 How can I motivate contributors to participate in
project retrospective analysis? 251
Index 253

Introduction
‘‘It depends.’’
Project management problems frequently arise as questions, and
most good project management questions have the same answer: ‘‘It
depends.’’
By definition, each project is different from other projects, so no
specific solution for a given problem is likely to work exactly as well for
one project as it might for another. That said, there are general princi-
ples that are usually effective, especially after refining the response with
follow-up questions, such as ‘‘What does it depend on?’’ For many of
the project management problems included in this book, the discussion
begins with some qualifications describing what the response depends
on and includes factors to consider in dealing with the issue at hand.
This book is based on questions I have been asked in classes and
workshops, and in general discussions on project management regard-
ing frequent project problems. The discussions here are not on theoreti-
cal matters (‘‘What is a project?’’), nor do they dwell on the self-evident
or trivial. The focus here is on real problems encountered by project
managers working in the trenches, trying to get their projects done in
today’s stress-filled environment. These responses are based on what
tends to work, at least most of the time, for those of us who lead actual
projects.
Some problems here relate to very small projects. Others are about
very large projects and programs. Still others are general, and include
some guidance on how you might go about applying the advice offered
in a particular situation. In all cases, your judgment is essential to solv-
ing your particular problems. Consider your specific circumstances and
strive to ‘‘make the punishment fit the crime.’’ Adapt the ideas offered
here if they appear helpful. Disregard them if the advice seems irrele-
vant to your project.
Several general themes recur throughout. Planning and organization
are the foundations for good project management. Confront issues and
problems early, when they are tractable and can be resolved with the
least effort and the fewest people. Escalate as a last resort, but never
1

2 Introduction
hesitate to do so when it is necessary. People will treat you as you treat
them, so act accordingly. Good relationships and trust will make solving
any problem easier—you really do get by with a little help from your
friends.
Given the broad spectrum of project types and the overwhelming
number of ways that they can get into trouble, it’s unlikely that this (or
any) book will effectively resolve all possible problems. Nonetheless, I
hope that this book will help you to successfully complete your proj-
ects, while retaining some of your sanity in the process.
Good luck!
Tom Kendrick
tkendrick@failureproofprojects.com
San Carlos, CA

General Topic
PART 1: GENERAL
1. What personality type fits best into
project management?
Depends on:
g The type and scale of the project
g Experience of the project team
Understanding Personality Types
There are a large number of models used to describe personalities. One
of the most prevalent is the Myers-Briggs Type Indicator (MBTI). One of
its factors describes a spectrum between introversion and extroversion.
Projects are about people and teams, so good project leaders tend to be
at least somewhat extroverted. Introverted project managers may find
their projects wandering out of control because they are insufficiently
engaged with the people responsible for the work.
A second factor is the dichotomy between a preference for observ-
able data and a preference for intuitive information. Projects are best
managed using measurable facts that can be verified and tested. A third
factor relates to whether decisions are based on logical objective analy-
sis or on feelings and values. Projects, especially technical projects, pro-
ceed most smoothly when decisions are based on consistent, analytical
criteria.
The fourth MBTI factor is the one most strongly aligned with project
management, and it describes how individuals conduct their affairs. On
one extreme is the individual who plans and organizes what must be
done, which is what project management is mostly about. On the other
extreme is the individual who prefers to be spontaneous and flexible.
Projects run by this sort of free spirit tend to be chaotic nightmares,
and may never complete.
Considering Other Factors
Project managers need to be ‘‘technical enough.’’ For small, technical
projects, it is common for the project leader to be a highly technical
subject matter expert. For larger programs, project managers are sel-
3

4 What personality type fits best into project management?
dom masters of every technical detail, but generally they are knowledge-
able enough to ensure that communications are clear and status can
be verified. On small, technical projects, the project manager may be a
technical guru, but that becomes much less important as the work
grows. Large-scale projects require an effective leader who can motivate
people and delegate the work to those who understand the details.
Good project managers are detail oriented, able to organize and
keep straight many disparate activities at a time. They are also prag-
matic; project management is more about ‘‘good enough’’ than it is
about striving for perfection. All of this relates to delivering business
value—understanding the trade-offs between time, scope, and cost
while delivering the expected value of the project to the organization.
Finally, good project managers are upbeat and optimistic. They
need to be liked and trusted by sponsors and upper management to be
successful. They communicate progress honestly, even when a project
runs into trouble. Retaining the confidence of your stakeholders in times
of trouble also requires communicating credible strategies for recovery.
Effective leaders meet challenges with an assumption that there is a
solution. With a positive attitude, more often than not, they find one.

General Topic
2. What are the habits of successful
project managers?
Effective project leaders have a lot in common with all good managers.
In particular, good project managers are people oriented and quickly
establish effective working relationships with their team members.
Deining Your Working Style
One of the biggest differences between a project manager and an indi-
vidual contributor is time fragmentation. People who lead projects must
be willing to deal with frequent interruptions. Project problems,
requests, and other imperatives never wait for you to become unbusy,
so you need to learn how to drop whatever you are doing, good-
naturedly, and refocus your attention. Project leaders who hide behind
‘‘do not disturb’’ signs and lock their doors run the risk of seeing trivial,
easily addressed situations escalate into unrecoverable crises. Between
urgent e-mails, phone calls, frequent meetings, and people dropping in,
project managers don’t generally have a lot of uninterrupted time. You
may need to schedule work that demands your focus and concentration
before the workday begins, or do it after everyone has left for the day.
This is a crucial part of being people oriented. Project leaders who
find that they are not naturally comfortable dealing with others tend to
avoid this part of the job and as a consequence may not stick with proj-
ect management very long, by either their own choice or someone
else’s. Being people oriented means enjoying interaction with others
(while being sensitive to the reality that some of your team members
may not relish interaction as much as you do) and having an aptitude
for effective written communication and conversations.
Referring to an Old List
As part of a workshop on project management some time ago, I chal-
lenged the participants in small groups to brainstorm what they thought
made a good project leader. The lists from each group were remarkably
5

6 What are the habits of successful project managers?
similar, and quite familiar. In summary, what they came up with is that
good project managers:
g Can be counted on to follow through
g Take care of their teams
g Willingly assist and mentor others
g Are sociable and get along with nearly everyone
g Are respectful and polite
g Remain even tempered, understanding, and sympathetic
g Can follow instructions and processes
g Stay positive and upbeat
g Understand and manage costs
g Are willing to ‘‘speak truth to power’’
g Act and dress appropriately
Reviewing the results, I realized that the items from the brainstorming
closely mirrored those of another list, one familiar to lots of eleven-year-
old boys for about a century; that list is ‘‘the Scout Law.’’ The version
I’m most familiar with is the one used by the Boy Scouts of America, but
worldwide other variants (for Girl Scouts, too) are essentially the same.
Effective project leaders are trustworthy; they are honest, can be
relied upon, and tell the truth. They are loyal, especially to the members
of their team. Project managers are helpful, pitching in to ensure prog-
ress and working to build up favors with others against the inevitable
need that they will need a favor in return some time soon. Wise project
leaders remain friendly even to those who don’t cooperate, and they
value diversity. They are also courteous, because the cooperation that
projects require is built on respect. Project managers are generally kind,
treating others as they would like to be treated. We are also obedient,
following rules and abiding by organizational standards. Good project
managers are cheerful; when we are grumpy no one cooperates or wants
to work with us. We are thrifty, managing our project budgets. Effective
project leaders also need to be brave, confronting our management
when necessary. Good project managers are also ‘‘clean.’’ It is always a
lot easier to engender respect and lead people when we are not seen as
sloppy or having low standards. (Actually, there is a twelfth item on the
Boy Scout list: Reverent. Although it did not come up in the brainstorm,
praying for miracles is not uncommon on most projects.)

General Topic
3. I’m an experienced individual
contributor but very new to project
management. How do I get my new
project up and going?
Depends on:
g Availability of mentoring, training, and other developmental
assistance in your organization
g Your aptitude for leading a team and any applicable previous
experience you have
g The experience of the team you are planning to lead
Getting Started
Initiation into project management often involves becoming an ‘‘acci-
dental project manager.’’ Most of us get into it unexpectedly. One day
you are minding our own business and doing a great job as a project
contributor. Suddenly, without warning, someone taps you on the shoul-
der and says, ‘‘Surprise! You are now a project manager.’’
Working on a project and leading a project would seem to have a lot
in common, so selecting the most competent contributors to lead new
projects seems fairly logical. Unfortunately, the two jobs are in fact quite
different. Project contributors focus on tangible things and their own
personal work. Project managers focus primarily on coordinating the
work of others. The next two problems discuss the responsibilities and
personality traits of an effective project manager, but if you are entirely
new to project leadership you will first also need to set up a foundation
for project management. Novice project managers will need to invest
time gaining the confidence of the team, determining their approach,
and then delegating work to others.
Engaging Your Team
Gaining the confidence of your contributors can be a bit of a challenge
if you are inexperienced with team leadership. Some people fear dogs,
7

8 I’m an experienced individual contributor new to project management
and dogs seem to know this and unerringly single out those people to
bother. Similarly, a project manager who is uncomfortable is instantly
obvious to the project team members, who can quickly destroy the con-
fidence of their team leader at the first signs of indecision, hesitancy,
or weakness. Although you may have some coverage from any explicit
backing and support of sponsors, managers, and influential stakehold-
ers, you need to at least appear to know what you are doing. It’s always
best to actually know what you are doing, but in a pinch you can get
away with a veneer of competence. Your strongest asset for building the
needed confidence of your team as a novice project manager is generally
your subject matter expertise. You were asked to lead the project, and
that was probably a result of someone thinking, probably correctly, that
you are very good at something that is important to the project. Work
with what you know well, and always lead with your strengths. Remem-
ber that ‘‘knowledge is power.’’
Seek a few early wins with your team, doing things like defining
requirements, setting up processes, or initial planning. Once the pump
is primed, people will start to take for granted that you know what you
are doing (and you might also). Establishing and maintaining teamwork
is essential to good project management, and there are lots of pointers
on this throughout the book.
Choosing Your Approach
For small projects, a stack of yellow sticky notes, a whiteboard to scat-
ter them on, and bravado may get you through. For most projects,
though, a more formalized structure will serve you better. If possible,
consult with an experienced project manager whom you respect and
ask for mentoring and guidance. If training on project management is
available, take advantage of it. Even if you are unable to schedule project
management training in time for your first project, do it as soon as you
can. This training, whenever you can sandwich it in, will help you to
put project management processes in context and build valuable skills.
Attending training will also show you that all the other new project man-
agers are at least as confused as you are. If neither mentoring nor train-
ing is viable, get a good, thin book on project management and read
through the basics. (There are a lot of excellent very large books on
project management that are useful for reference, but for getting
started, a 1,000-page tome or a ‘‘body of knowledge’’ can be overwhelm-
ing. Start with a ‘‘Tool Kit,’’ ‘‘for Dummies’’ book, ‘‘Idiot’s Guide,’’ or
similarly straightforward book on project management. You may also

I’m an experienced individual contributor new to project management 9
want to seek out a book written by someone in your field, to ensure that
most of it will make sense and the recommendations will be relevant to
your new project.)
Decide how you are going to set up your project, and document the
specific steps you will use for initiation and planning. You will find many
useful pointers for this throughout the problems discussed in the initia-
ting and planning parts later in this book.
Delegating Work
One of the hardest things for a novice project manager to do is to recog-
nize that project leadership is a full-time job. Leading a project effec-
tively requires you to delegate project work to others—even work that
you are personally very good at. Despite the fact that you may be better
and faster at completing key activities than any of your team members,
you cannot hope to do them all yourself while running a successful proj-
ect. At first, delegating work to others who are less competent than you
are can be quite difficult, even painful. You need to get over it. If you
assign significant portions of the project work to yourself, you will end
up with two full-time jobs: leading the project by day and working on
the project activities you should have delegated at night and on week-
ends. This leads to exhaustion, project failure, or both.

General Topic
4. What are the most important
responsibilities of a project manager?
Depends on:
g Role: Project coordinator, Project leader, Project manager, Program
manager
g Organizational requirements and structure
Overall Responsibilities
The job of a project manager includes three broad areas:
1. Assuming responsibility for the project as a whole
2. Employing relevant project management processes
3. Leading the team
Precisely what these areas entail varies across the spectrum of roles,
from the project coordinator, who has mostly administrative responsi-
bilities, to the program manager, who may manage a hierarchy of con-
tributors and leaders with hundreds of people or more. Regardless of
any additional responsibilities, though, the following three areas are
required: understanding your project, establishing required processes,
and leading your team.
Understanding Your Project
In most cases, regardless of your role description, you own the project
that has your name on it. The project size and the consequences of not
succeeding will vary, but overall the buck stops with you.
It is up to you to validate the project objective and to document the
requirements. As part of this, develop a clear idea of what ‘‘done’’ looks
like, and document the evaluation and completion criteria that will be
used for project closure. A number of the problems in the project initia-
tion part of this book address this concern, but in general it’s essential
that you reach out to your sponsor, customer, and other stakeholders
and gain agreement on this—and write it down.
You also have primary responsibility for developing and using a real-
istic plan to track the work through to completion, and for acceptably
achieving all requirements in a timely way.
10

What are the most important responsibilities of a project manager? 11
Establishing Required Processes
The processes used for managing projects include any that are man-
dated by your organization plus any goals that you define for your spe-
cific project. Key processes for your project include communications,
planning, and execution. For communications, determine how and when
you will meet and how often you will collect and send project informa-
tion and reports. Also determine where and how you will set up your
project management information system or archiving project informa-
tion. For planning, establish processes for thorough and realistic project
analysis, including how you will involve your team members. Executing
and controlling processes are also essential, but none is more important
than how you propose to analyze and manage project changes. There
are many pointers on all of this throughout the problems in the project
initiation part of this book.
Setting up processes and getting buy-in for them is necessary, but it
is never sufficient. You must also educate the members of your team
and relevant stakeholders to ensure that everyone understands the
processes they have committed to. Also establish appropriate metrics
for process control and use them diligently to monitor work throughout
your project.
Leading Your Team
The third significant responsibility is leading the team. Leadership rests
on a foundation of trust and solid relationships. Effective project manag-
ers spend enough time with each team member to establish strong
bonds. This is particularly difficult with distributed teams, but if you
invest in frequent informal communications and periodic face-to-face
interactions you can establish a connection even with distant contribu-
tors. You will find many helpful suggestions for dealing with this
throughout the part of this book on teamwork.
Projects don’t succeed because they are easy. Projects succeed
because people care about them. Leadership also entails getting all proj-
ect contributors to buy in to a vision of the work that matters to them
personally. You must find some connection between what the project
strives to do and something that each team member cares about. Uncov-
ering the ‘‘what’s in it for me?’’ factor for everyone on the team is funda-
mental to your successful leadership.

General Topic
5. What is the value of project
management certification? What about
academic degrees in project
management?
Depends on:
g Age and background
g Current (or desired future) field or discipline
Considering Project Management Certiication
Project management certification has substantially grown in popularity in
recent years, and some form of it or another is increasingly encouraged or
required for many jobs in project management. The Project Management
Professional (PMP
) certification from the Project Management Institute
in the United States—and similar credentials from other professional proj-
ect management societies around the globe—is not too difficult to attain,
especially for those with project management experience. For many proj-
ect managers, it is often a case of ‘‘it can’t hurt and it may help’’ with your
career. For those early in their careers, or looking to make a move into
project management, or seeking a type of job where certification is man-
datory, pursuing certification is not a difficult decision.
Certification in project management is also available from many uni-
versities and colleges. Although many of these programs provide excel-
lent project management education, in general this kind of certification
rarely carries the weight of certification from a professional society. Uni-
versity certification programs can provide preparation for qualifying for
other certifications, though, and certification from well-respected uni-
versities may add luster to your resume within the school’s local area.
For those project managers who are in fields where certifications
and credentials are not presently seen as having much relevance, the
cost and effort of getting certified in project management may not be
worthwhile. For some, investing in education in a discipline such as
engineering or business could be a better choice, and for others certifi-
cation in a job-specific specialty will make a bigger career difference.
12

What is the value of project management certification? 13
Even for jobs where project management certification is not presently
much of a factor, though, there may be trends in that direction. A de-
cade ago, few IT project management openings required certification of
any kind; today for many it’s mandatory, and similar trends are visible
in other fields.
Considering Project Management Degrees
A related recent movement has been the growth in academic degrees in
project management. More and more universities are offering master’s
degrees in project management, often tied to their business curricula.
Such programs may help some people significantly, particularly those
who want to move into project management from a job where they feel
stuck or wish to transition into a new field. A freshly minted degree can
refocus a job interview on academic achievements rather than on the
details of prior work experiences.
Embarking on a degree program is a big deal for most people,
though. It will cost a lot of money and requires at least a year full-time
(or multiple years part-time while continuing to work). Before starting
a rigorous academic degree program in project management, carefully
balance the trade-offs between the substantial costs and realistically
achievable benefits, and consider whether a degree in some other disci-
pline might be a better long-range career choice.
Another factor to consider, as with any academic degree program,
is the reputation and quality of the chosen institution. Some hiring man-
agers might select a candidate with a project management certificate
from a school that they know and respect over someone who has a mas-
ter’s degree from an institution they have never heard of or do not
regard highly.

General Topic
6. There are many project development
methodologies. What should I consider
when adopting standards such as the
Project Management Institute PMBOK
?
Depends on:
g Organizational standards and requirements
g Legal regulations
g Your industry or discipline
Assessing Project Management Structures
Modern project management has been around for more than a hundred
years, with many of the basic techniques tracing back to Fred Taylor,
Henry Gantt, and others central to the ‘‘scientific management’’ move-
ment of the early twentieth century. These basic project management
processes have survived for so long because they are practical and they
work. To the extent that today’s bewildering array of methodologies,
standards, and other guidelines for project and program management
incorporate the fundamental tried-and-true principles, they can be of
great value, particularly to the novice project leader.
Standards and methodologies originate from many sources: some
are governmental, others are academic or from commercial enterprises,
and many are from professional societies.
For many government projects, application and use of mandated
standards—such as PRINCE (PRojects IN a Controlled Environment) for
some types of projects in the United Kingdom or the project manage-
ment portions of the Software Engineering Institute’s Capability Matu-
rity Model Integration (CMMI) for many U.S. defense projects—is not
optional. For other project environments, though, the choice to adopt a
specific standard is discretionary. In these cases, your choice will ide-
ally be based upon analysis of the trade-offs between the costs and over-
head of a given approach and the benefits expected through its use.
Commercial methodologies from consulting firms and vendors of
complex software applications can be very beneficial, particularly in
14

There are many project development methodologies 15
cases where large projects are undertaken to implement something
complicated and unlikely to be repeated that is outside of the organiza-
tion’s core expertise. Methodologies that include specific approaches
and details about handling particularly difficult aspects of implementa-
tion can save a lot of time, effort, and money. More general commercial
methodologies available from consulting organizations and from the ser-
vices branches of product vendors can also have value, but over time
most organizations tend to heavily customize their use, abandoning
parts that have low added value and modifying or augmenting the rest
to better address project needs.
Standards from professional organizations are less parochial and
can be useful in a wide variety of project environments. They draw
heavily on successful established processes and are revised periodi-
cally by knowledgeable practitioners, so they also provide guidance for
new and emerging types of projects. This can be both a blessing and a
curse, however, because over time these standards tend to become
quite bloated, containing much that is of value only in very specific proj-
ect environments.
The emergence in the recent years of the Project Management Body
of Knowledge (PMBOK
) from the Project Management Institute based
in the United States as a worldwide standard is an interesting case of
this. In fact, the ‘‘PMBOK’’ does not actually exist in any practical sense.
The document generally referred to as ‘‘the PMBOK’’ is actually titled A
Guide to the Project Management Body of Knowledge (or PMBOK
Guide).
It is intended to be neither comprehensive (it’s only a ‘‘guide’’) nor a
methodology. It tends to expand with each four-year revision cycle a bit
like a dirty snowball rolling down a hill, picking up new ideas that are
tossed in, some with limited applicability and support, and shedding
very little of the content of prior versions. Despite this, the many seri-
ous, well-meaning, and generally knowledgeable volunteers (full disclo-
sure: including me) who undertake this gargantuan quadrennial project
do as good a job as they’re able to ensure that it is as useful as possible
to the worldwide project management community. It was never
designed, though, as a project management methodology. It lacks spe-
cific process information for implementation (again, it’s the PMBOK
Guide); it does not address many specifics necessary for success for
specific projects; and, in attempting to be comprehensive, it includes a
good deal that may have little (or no) value for some projects. It also
includes some content that contradicts content elsewhere in the guide
because it is written, and rewritten, by subcommittees that may not
agree all of the time. To use it as a foundation for effective project man-
agement in an organization would involve considerable work in docu-

16 There are many project development methodologies
menting the details of relevant included processes, determining which
portions are not relevant, and adding needed process content that is
not included in the PMBOK
Guide.
Choosing Your Approach
In selecting a methodology or standard to use in managing projects,
you must distinguish between the necessary and the sufficient. What is
necessary includes general practices that are applicable to most types
of projects most of the time. Whatever the source of guidance—a book,
a training course, a structured methodology—there is likely to be a lot
of this content. Standards and bodies of knowledge from academic
sources and professional societies are strong in this area, but they often
go little further. Successful project management in a particular environ-
ment requires a good deal that is unique to the specific project type,
and sometimes is even specific to single projects. Commercial method-
ologies and mandated governmental requirements may flesh out the
processes to include all that is needed for a successful project, but if
not, the organization or individual project leader will need to consider
what else will be needed and include it, to ensure that the approach will
be sufficient.
Another consideration in all of this is the list of reasons not to adopt
a project management standard. All structured approaches to project
management involve overhead, so consider whether the additional
effort represented by a given approach will be justified by realistic bene-
fits (including less rework, fewer missed process steps or requirements,
and more coherent management of related projects). If a complicated
methodology involves filling out a lot of forms and elaborate reporting,
estimate the potential value added for this effort before adopting it.
Finally, before embarking on a significant effort to adopt a new approach
for managing projects, ensure that there is adequate management spon-
sorship for such an effort. Stealth efforts to establish project manage-
ment methodologies are easily undermined and tend to be short-lived,
especially in organizations that have process-phobic management.

General Topic
7. What are the key considerations
when developing or revising a project life
cycle? What should I consider when
choosing between ‘‘waterfall’’ and
‘‘cyclic’’ (or ‘‘agile’’) life cycles?
Depends on:
g Project novelty
g Project duration and size
g Access to users and project information
Considering Life Cycle Types
Like methodologies, there are many types of life cycles, which vary a
good deal for different varieties of projects. Life cycles are also often
used either with, or even as part of, a project methodology to assist in
controlling and coordinating projects. The two most common types of
life cycle are ‘‘waterfall’’ and ‘‘cyclic.’’
A waterfall-type life cycle is an effective option for well-defined proj-
ects with clear deliverables. This life cycle has a small number of phases
or stages for project work that cascade serially through to project com-
pletion. For novel projects that must be started in the face of significant
unknowns and uncertainty, however, a cyclic life cycle that provides for
incremental delivery of functionality and frequent evaluation feedback
may be a better choice.
Assessing Waterfall Life Cycles
Although there are literally hundreds of variations in the naming of the
defined segments into which a project is broken, all waterfall life cycles
have one or more initiating phases that focus on thinking, analysis, and
planning. The stages of the middle portion of a life cycle describe the
17

18 What are the key considerations when developing or revising a project life cycle?
heavy lifting—designing, developing, building, creating, and other work
necessary to produce the project deliverable. Waterfall life cycles con-
clude with one or more phases focused on project closure, including
testing, defect correction, implementation, and delivery. Whatever the
phases or stages of the life cycle may be called, each is separated from
the next by reviews or gates where specific process requirements are to
be met before commencing with the next portion in the life cycle. Ensur-
ing that projects meet the exit criteria defined within a life cycle is a
good way to avoid missing essential steps, particularly for large pro-
grams where individually managed projects need to be synchronized
and coordinated.
Waterfall-type project life cycles are often more of a management
control process than a project management tool, and for this reason
they often parallel the central phases in a longer product development
life cycle that may include subsequent phases for maintenance and
obsolescence that follow project work and often have initiation phases
that precede the project. Whatever the specifics, when waterfall project
life cycles are fine tuned to reflect good project practices, they help
ensure that projects will proceed in an orderly manner even in times of
stress.
Assessing Cyclic Life Cycles
Cyclic life cycles are useful for projects where the scope is less well
defined. In place of a sequence of named phases, cyclic life cycles are
set up with a series of similar phases where each contains development
and testing. Each cyclic phase is defined to deliver a small additional
increment of functionality. As with waterfall life cycles, cyclic life cycles
are often set up in connection with a project methodology, commonly
an ‘‘agile’’ methodology where the content of each subsequent cycle is
defined dynamically as each previous cycle completes. For some cyclic
life cycles, the number of defined cycles is set in advance, but whether
the number of cycles is well defined or left open, the precise details of
the features and functionality to be included in each cycle will evolve
throughout the project; only a general description of the final delivera-
ble is set at the beginning of the project. Software development is the
most common environment where this sort of life cycle is applied, and
on agile software projects each cycle tends to be quite short, between
one and three weeks.

What are the key considerations when developing or revising a project life cycle? 19
Choosing a Life Cycle
For general projects, a waterfall life cycle is typically the best fit. This
approach generally provides a context for adequate planning and con-
trol with a minimum of overhead. Similar projects undertaken using the
two approaches some years ago as a test at Hewlett-Packard showed
that the traditional waterfall approach yielded results much more
quickly and with less cost (durations were half and total costs were
about a third). This was largely because of the start-stop nature of the
cyclic method and the additional effort needed for the required periodic
testing, evaluation of feedback, and redefinition. Agile methods and
cyclic life cycles are effective, however, when the project is urgent and
available information for scoping is not available. Using frequent feed-
back from testing as the project proceeds to iterate a sequence of soft-
ware deliveries and converge on a good solution can be significantly
more effective than starting a waterfall life-cycle project using guess-
work. Some criteria to consider when choosing a life cycle are listed in
the following table:
Waterfall Cyclic
Deliverable(s) Well defined Novel
Team size Medium to large Small
Project type Large scale or hardware Small-scale software
development, Fee-for-service, development
Construction, Research and development
User involvement Infrequent Constant
Establishing Reviews, Change Processes, and Metrics
Whatever your choice of life cycle, you will be most successful with
strong and appropriate defined processes. Set up the review points at
the conclusion of each phase in a waterfall life cycle to be no farther
apart than about three months, and establish stakeholder support for
the review process for each in advance. Clearly define the review
requirements for the end of each cycle or phase, and use the review
process to detect and deal with project issues. If significant changes are
needed to the project deliverable, promptly initiate formal evaluation of
the changes before initiating the next phase of the project. If the project

20 What are the key considerations when developing or revising a project life cycle?
objectives are threatened, investigate resetting the project’s baseline.
Gain stakeholder support at the close of each segment of the project
before continuing to the next phase.
Life-cycle metrics are also an important consideration. When plan-
ning, estimate the duration and resource requirements for each portion
of the life cycle. As each phase completes, determine any variances
against expectations and against the results of past projects. Life-cycle
metrics over time will enable you to determine the ‘‘shape’’ of proj-
ects—how much time and cost is consumed in each portion of a project.
If a phase in the life cycle becomes too large, you may want to consider
breaking it up into two or more new phases. If late-project phases are
chronically longer or more expensive than expected, more analysis and
planning in the earlier phases may be necessary. Metrics are also useful
with cyclic life cycles. The duration and cost of each cycle should vary
little, but you can and should measure the amount of incremental func-
tionality delivered in each cycle. You can also use metrics to determine
the number of cycles required to complete a typical project, and to set
expectations more realistically.

General Topic
8. How can I efficiently run mini-
projects (less than six months with few
dedicated resources)?
For less complex projects, the overall project management process may
be streamlined and simplified, but it is still required. Planning, team
building, establishment of minimal processes, and closure are all neces-
sary.
Doing Fast-Track Planning
Small, short projects are often very similar to projects you have done
before, so one very effective way to ensure a fast start is to develop
appropriate templates for project plans and schedules that can be easily
modified for use on new projects. If such templates are not available,
schedule a fast-track planning session with at least part of the staff likely
to be involved with the project, and as you develop the project docu-
ments, retain shadow copies that can be used as templates for future
similar projects.
Small projects are also often cross functional and may have few, if
any, contributors assigned full-time. To be successful with this kind of
project, you must involve the sponsor and other key stakeholders with
planning. Work to understand the reasons why the project matters, and
during the planning communicate why the people who initiated the proj-
ect think it is important.
Building Your Team
Without a full-time, dedicated staff, you may have some difficulty in get-
ting reliable commitments. Work with each contributor to establish a
good working relationship and mutual trust. Identify any aspects of the
project that seem to matter to your contributors, including any work
that they find desirable or fun, any learning opportunities that they
might appreciate, the potential importance of the deliverable, or any-
thing else that each individual might care about. Get commitment for
21

22 How can I efficiently run mini-projects?
project work both from your team members and from their direct man-
agement. Even on short, small projects, rewards and recognition are
useful, so consider any opportunities you have for thanking people,
informal recognition, and formal rewards.
Establishing Processes
The processes on small projects can be streamlined, but should not be
eliminated. Change control can be relatively informal, and if the project
is sufficiently straightforward it may even seem unnecessary. Nonethe-
less, you will be well served by establishing a process in advance to deal
with any requested midproject changes. At least establish some basic
requirements for requesting and documenting potential changes. Set up
a review process that everyone agrees to in advance, and identify some-
one (ideally you) who has the authority to say ‘‘no.’’
Escalation is crucial on short projects where you may not have
much authority. If you run into difficulties that you are unable to resolve
on your own or require intervention to proceed, promptly involve your
sponsor or other stakeholders who can get things unstuck. Problems on
short projects can quickly cause schedule slip if not dealt with right
away.
Communication may also be minimal on simple projects, but plan
for at least weekly status collection and reporting, and conduct short
periodic team meetings throughout the project.
Closing a Small Project
Projects without elaborate, complex deliverables are generally not dif-
ficult to close. The requirements are usually straightforward, so verify-
ing that they have been met is not complicated. It may be a good idea
as the project nears completion to do a ‘‘pre-close’’ with key stakehold-
ers to ensure that the initial requirements remain valid and to avoid
surprises. Work to ensure that sign-off at the end of the project is a non-
event.
Conclude even small projects with a quick assessment of lessons
learned to capture what went well and what should be changed. Adjust
the planning and other template information for use on future similar
projects. Also, thank all the contributors and close the project with a
short final status report.

General Topic
9. How rigid and formal should I be
when running a small project?
Depends on:
g Past experiences
g Background of your team
g All aspects of project size
Determining Formality
The short (and admittedly not very helpful) answer to this question is
‘‘formal enough.’’
As discussed in Problem 8, overall formality on small projects can
be a good deal less than on larger projects, but it should never be none.
One important aspect to consider is the complexity of the project, not
just its staffing or duration. Even very small projects can be compli-
cated, so establish a level of process formality that is consistent with
the most daunting aspects of your project. Work with your team to
determine what will be useful and keep you out of trouble, and adopt
less formal methods only where your personal knowledge truly justi-
fies it.
It is also best to start a project with a bit more process formality
than you think is truly necessary; relaxing your processes during a proj-
ect is always easier than adding to them once your project is under way.
Establishing the Minimum
Even for short, simple projects, define the objectives and document the
requirements in writing. Other aspects of project initiation may be
streamlined, but never skimp on scoping definition.
Planning may also be simplified, and you may not need to use elabo-
rate (or in some cases any) project management scheduling software to
document the project. With sufficiently straightforward projects, even
scattered yellow sticky notes set out on a whiteboard might be suffi-
cient. If your team is geographically separated, though, ensure that you
have a project plan that can be used effectively by all.
23

24 How rigid and formal should I be?
Project monitoring may also be less formal, but collect and distrib-
ute status reports at least weekly, and maintain effective ongoing com-
munications with each project contributor. Schedule and be disciplined
about both one-on-one communication and periodic team meetings to
keep things moving and under control.
Overall, watch for problems and difficulty, and adjust the processes
you use for each project and from project to project to balance the
trade-off between excessive overhead and insufficient control.

General Topic
10. How do I handle very repetitive
projects, such as product introductions?
Establishing Templates and Plans
As with very small projects, repetitive projects are more easily managed
using detailed templates and plans that document the necessary work
from past projects. Appropriate work breakdown templates that have
been kept up-to-date may include nearly all the activities needed and
reduce your planning efforts to minor additions and deletions, small
adjustments to estimates, and assignment of ownership. If no templates
exist, extract basic planning information from the documentation of past
projects or initiate a fast-track planning exercise.
Assessing Project Retrospectives
Consider difficulties encountered by past projects and recommenda-
tions for change that came up during previous post-project analyses.
Also identify any work that was added or new methods that were suc-
cessfully employed on recently completed similar projects. Work with
your project team to find changes that will improve the planning tem-
plates and make adjustments to them.
Incorporating Speciic Differences
Finally, seek what is different or missing. All projects are unique, so no
template will cover every aspect of a new project completely. Review
the specific requirements to detect any that are at variance with those
from previous projects. Add any necessary work that these require-
ments will require. Document completion and evaluation criteria, look
for any that are new, and adjust the plans to accommodate them. Review
all the work in the adjusted planning templates and verify that it is all
actually needed. Delete any work that is unnecessary for this particular
project.
25

26 How do I handle very repetitive projects?
Tracking the Work
Throughout the project, scrupulously track the work using your plan-
ning documents. Monitor for difficulties and respond to them promptly.
When you find missing or inadequately planned work, note the specifics
and update the planning templates to improve them for future projects.

General Topic
11. How should I manage short,
complex, dynamic projects?
Depends on:
g Staff size and commitments
g Nature of the complexity
Dealing with Complexity Under Pressure
Projects that represent a lot of change in a hurry have a potentially
overwhelming number of failure modes. Part of the difficulty is com-
pressed timing, often with a duration set at about ninety days to com-
plete the work. When doing a lot of work in a short time frame, even
seemingly trivial problems can trigger other trouble and cause the proj-
ect to quickly cascade out of control. If the complexity is technical, thor-
ough planning can help. If the complexity is organizational, strong
sponsorship and exceptionally effective communications will make a dif-
ference. Whatever makes the project complex, a single-minded focus
and disciplined project management processes will aid in avoiding
disaster.
Maintaining Support
Work with the sponsors and key stakeholders to verify the business rea-
sons for a ‘‘crash’’ approach to the project. Understand what the bene-
fits of the deliverables will be and document a credible case for why
they matter. Also determine what the consequences of an unsuccessful
project would be. Use the business case for the work to secure adequate
staffing and funding for the work, including a budget reserve to cover
any contingencies as they arise. Also establish a process for prompt
escalation and resolution for issues that are beyond your control, with
a commitment for timely response and authority to take action on your
own in the absence of a management decision within the defined time
window.
Throughout the project, communicate frequently with your sponsor
and key stakeholders, delivering both good and bad news without delay
27

28 How should I manage short, complex, dynamic projects?
as the project progresses. Never allow small problems to develop into
irresolvable quagmires, as they will rapidly become in high-pressure
projects. Continuity of staffing is critical on this sort of project, so
strongly resist, and enlist support from your sponsor to block, all
attempts to change or to reduce the staffing of the project as it pro-
ceeds.
Planning the Work
On short projects, planning must be intense and effective. To minimize
distractions, consider working off-site, and if you have any geographi-
cally distant contributors, do whatever you need to do to enable them
to participate in person for project planning.
Engage your core team in gaining a deep understanding of all the
project requirements, and work to develop a credible, sufficiently
detailed plan for meeting them. One advantage of a short project is that
the relatively short time frame restricts the number of options, so it
may be possible to develop a solid, detailed plan in a reasonable time
(assuming, of course, that the project is in fact possible). As part of
the planning exercise, define the specifics of all testing and acceptance
evaluation, and verify them with your stakeholders when you baseline
the project.
On intense, fast-track projects, well-defined and agreed-upon processes
are critical. Processes for communication, problem escalation (refer-
enced earlier), risk management, and many other aspects of project
management are crucial, but none is more important when executing a
highly complex short project than the process for managing scope
change. As part of initiation, establish a strong, sufficiently formal pro-
cess for quickly assessing requested changes. Get buy-in from your proj-
ect team and key stakeholders for a process that has teeth in it and a
default disposition of ‘‘reject’’ for all changes, regardless of who submits
them. Identify who has the authority to say ‘‘no’’—ideally you as the
project manager. Establish an expectation that even for changes that
have merit, the disposition is more likely to be either ‘‘not yet,’’ to allow
the project to complete as defined and to handle the change as part of a
subsequent follow-on effort, or ‘‘yes with modifications,’’ to accept only

How should I manage short, complex, dynamic projects? 29
those parts of the requested change that are truly necessary. Excessive
change will guarantee disaster on complex, high-pressure projects.
Monitoring and Communicating
Finally, effective tracking and communication is essential. Aggressive
plans must always be tracked with high discipline. Set status cycles to
be at least weekly, and increase the frequency whenever things are not
proceeding as planned. During times of high stress, schedule short five-
to ten-minute stand-up or teleconference status meetings each day to
stay on top of evolving progress. Handle problems and variances from
plans within your team when possible, but do not hesitate to escalate
situations where resolution is beyond your control, especially for any
case that could endanger the success of the overall project.
Communicate status clearly and at least weekly, and do it more
often when warranted. Use bulleted highlights in an up-front executive
summary to emphasize any critical information in your status reports.
Use ‘‘stoplight indicators’’ for project activities, and don’t hesitate to
name names and color items red or yellow whenever they appear to be
headed for trouble. (Always warn people in advance, though, to give
them a chance to fix things.)
Overall, strive to remain focused on your project and available to all
involved with the work. Never skip status collection or reporting cycles,
even when in escalation mode, and delegate responsibility to a capable
member of your project team whenever you are not available.

General Topic
12. How do I balance good project
management practices with high
pressure to ‘‘get it done’’? How do I build
organizational support for effective
project planning and management?
Dealing with Process Phobia
In some environments where projects are undertaken, project manage-
ment is barely tolerated as ‘‘necessary overhead’’ or, worse, discour-
aged altogether. Although very small and straightforward projects may
be successful with little planning and no structured approach, as proj-
ects become larger, longer, and more complex this practice can become
very expensive. A manager or project sponsor who prohibits good proj-
ect practices by asking, ‘‘Why are you wasting time with all that planning
nonsense? Why aren’t you working?’’ will soon be inquiring why the
project is well past its intended deadline and redoing some of the work
for the third or fourth time.
Resistance to the use of good project processes can be from man-
agement above you, or from the members of your project team, or even
from both. Although you may not be able to completely remove resis-
tance from either source, there are tactics that can help.
Building Sponsor Support
Ultimately, the best tactics to use when approaching management about
more formal project management processes depend on financial argu-
ments. Although it may be difficult to ‘‘prove’’ that good project pro-
cesses will save money, there are always plausible places to start. The
best involve credible project metrics, especially those that are already
in place, visible, and at adverse variance compared with expectations. If
projects are chronically late, over budget, or otherwise causing organi-
zational issues, you can do some root cause analysis to tie the perfor-
mance metrics to poor project practices such as lax change controls or
30

How do I balance good practices with high pressure? 31
insufficient planning. Use what you learn to build a convincing case and
negotiate management support for more structured project manage-
ment.
Even in the absence of established metrics, you may still be able to
find sources of pain that are obvious and might be relieved with better
project discipline. You may be able to persuade your management with
plausible estimates of potential savings or anecdotal evidence based on
success stories either within your organization or from outside, similar
situations.
When the view that formal project practices are mostly unneeded
overhead is deeply entrenched, you may find that progress in gaining
support is very slow and difficult. If so, proceed incrementally over time,
seeking support for the processes that you believe will make the biggest
difference first, and work to add more structure gradually over time.
Building Team Support
When you have difficulty encouraging good practices within your team,
the best place to start is by identifying sources of pain and showing
how better processes could provide relief. For example, many teams
are reluctant to invest time in thorough planning, particularly when the
contributors are relatively inexperienced. New project teams often have
a strong bias for action, and planning and thinking doesn’t seem to be
either productive or much fun. The reality, though, is that the most
important aspect of planning is ensuring that the next thing chosen to
work on is the most important thing to work on, and this is only possible
with thorough analysis of project work. Before the project can be com-
pleted, all the activities must be identified, and the choice between
whether we do this up front and organize the work or do it piece by
piece, day by day throughout the project should not be difficult. Thor-
ough up-front planning not only sets up project work in an efficient,
effective way, it also provides the project leader and the team with the
knowledge (or at least a strong belief) that the project is possible. In the
absence of a plan, the best we have are hopes, dreams, and prayers,
none of which provides a particularly solid basis for project success.
Although it will appear to some that planning will delay the start of
work and ultimately make a project take longer, it is easy to demonstrate
that the principle of ‘‘Go slow initially to go fast later’’ is essential to
efficient projects that get most things right the first time through.
Ultimately, gaining team cooperation for effective project processes

32 How do I balance good practices with high pressure?
relies on helpful mentoring and teaching. Good project managers lead
by example, modeling the behaviors that they desire of their teams.
Resorting to Stealth-Mode Project Management
Winning the argument about whether project management processes
are worthwhile depends on at least some open-mindedness on the part
of others. When even your best arguments fall on deaf ears, you may
find it necessary to take your processes underground. This is not a
desirable way to proceed, but it’s better than failing. Some project lead-
ers do their planning, risk management, and other project analysis work
at home or outside normal working hours. Over time, you will likely
find co-conspirators who will help you, making your efforts both more
effective and less lonely.
It is also possible that the obviously more successful management
of your projects will be noticed. When you are approached to find out
why, you may use this opening to engage in a discussion that can lead
to more acceptance and support for better project practices overall, out
in the open.

General Topic
13. How does project management
differ between hardware and
software projects?
Depends on:
g Project size and complexity
Dealing with Tangible and Intangible Deliverables
The basic principles of project management are applicable to projects
of any type, but there are some key differences worth noting between
hardware development projects having physical deliverables and soft-
ware projects that generate less tangible results. The specifics of the
project life cycle may be dissimilar, and there are often differences in
processes, such as those related to testing and scope change control.
Deining Life Cycles
Software projects, especially those with very novel deliverables that are
relatively small, may elect to use an ‘‘agile’’ or cyclic life cycle, as dis-
cussed in Problem 7.
Hardware projects and larger software projects generally employ a
more traditional waterfall-type life cycle, but the names of the life-cycle
phases may differ. For product development projects, whether hard-
ware or software, a typical life cycle will begin with one or more phases
focused on definition and analysis, with a business decision to carry the
project forward at a relatively early process stage. Software develop-
ment undertaken on a fee-for-service basis, on the other hand, usually
has more phases on the front end related to sales and proposal activi-
ties necessary to win the business. The business decision in this case is
further along the sequence of phases and represents the decision by the
customer to agree to the proposal and sign a contract. There may be
only one or two phases subsequent to this decision point, to execute
the contract work, and then to secure approval and payment.
33

34 How do hardware and software projects differ?
Establishing Processes and Roles
With a well-defined hardware project, scoping changes are expected to
be rare and the process for managing those changes is usually defined
quite formally. Software projects also need good scoping management
processes, but changes are inevitably more common, and (whether it is
actually true or not) changes are considered to be less costly and dis-
ruptive to software projects. Particularly early in a software project, the
process used to manage changes to the deliverable can be relatively
informal, even after the baseline plan has been set.
Testing is another area where there are often differences. Software
projects may have multiple interim deliverables that need to be tested
and evaluated, so testing may be necessary throughout a software proj-
ect. Owing to the nature of hardware projects, most testing tends to
be scheduled shortly before project closure, including the unit tests of
subcomponents of a complex system deliverable. Because hardware
components may come together in a testable configuration only near
the end, evaluation (except for that done as part of early feasibility
investigation) is mostly done fairly late in the project.
For some types of hardware projects, the rate of technological evo-
lution is relatively slow compared to software projects. Because of this,
the technical expertise of a project leader of a hardware project tends
to be deeper than that of those who lead software projects. For all proj-
ects, success depends on the subject matter expertise of the project
manager, but software project leaders may be much more dependent on
the specialized backgrounds of their team members. Because of this,
and the increasingly cross-functional nature of software projects, effec-
tive software project leaders need to have especially well-developed
people leadership skills.

General Topic
14. How many projects can a project
manager realistically handle
simultaneously?
Depends on:
g Team size(s)
g Project complexity
g Project workflow continuity
Understanding Limits on Control
The number of projects that even an experienced, grizzled project man-
ager can effectively manage is usually one. There are exceptions to this,
but managing several simultaneous independent projects, where any or
all of them might need attention at any time, often results in a loss of
visibility and control, serious problems, and probable failure of one or
more of them. Managing more than one project well requires either that
the projects be small and simple, or that they not require uninterrupted
effort.
Project leaders typically spend about 10 percent of their time inter-
acting with each full-time member of their project team (or teams), so
projects with about a dozen contributors will account for all the time
that’s available, and then some. Managing several teams of ten to twelve
people working on separate projects can be successful through delega-
tion of responsibility to leaders for each who can manage their assigned
projects. Delegation such as this is a key tactic of program management,
which focuses on management of multiple related projects.
Managing Very Small Projects
It is possible to manage more than one project if each is relatively small
and the number of contributors in total is about twelve or fewer. Even if
some of the team members are involved with more than one of the proj-
ects, you should be able to keep things in balance as long as cross-
project timing and resource contention conflicts are minimal. Regard-
35

36 How many projects can a project manager handle?
less of how small the projects are, though, for the sake of your sanity
keep the total number of simultaneous projects below about a half
dozen. You will find some additional suggestions for leading multiple
small projects in Problem 81.
Managing Discontinuous Projects
Another case where managing more than one project may be feasible is
where there are significant natural gaps in the work. For small projects
that have a good deal of inherent ‘‘wait time’’ in their schedules, you
can potentially manage a larger number at once. The maximum number
depends on the complexity of the work and the proportion of work time
to wait time. One very able and experienced project leader that I worked
with who managed relatively complicated printing projects typically
had between fifteen and thirty projects going at any given time, but of
course most of them required only short bursts of attention about once
a week.

General Topic
15. How do I handle my day-to-day
tasks along with managing a project?
Depends on:
g Whether you have a small or a significant number of other
responsibilities
Determining Your Available Time
There are two aspects to this issue—the short term and the long term.
In the short term, keeping up with your responsibilities starts with pre-
serving at least a little slack time in your schedule. To ensure this,
review your daily schedules at least a day or two out and protect a small
amount of open time in both the morning and the afternoon for dealing
with unanticipated needs. At the end of a day of back-to-back meetings,
you will undoubtedly have a number of pending tasks, some of which
will be late. Also, always check your schedule to preserve a bit of slack
before accepting new meeting requests or other new commitments (or
when planning new meetings yourself). When you must, say ‘‘no’’ to
requests you cannot meet.
Longer term, balancing your responsibilities with your available
time begins with a realistic assessment of your capacity. When your
overall responsibilities exceed what you can reasonably get done, you
will ultimately need to either delegate or eliminate some of your work.
For most project managers, the number of hours available in a week
tends to be flexible, but it is finite. Exactly how you choose to estimate
your capacity is up to you, but it is a good idea to begin with a maximum
based on a combination of what you generally have done in the past,
your personal preferences, and organizational expectations. Having
determined your theoretical capacity, you should deduct about 10 per-
cent or so to account for unexpected emergencies and personal time off
for vacations and other time away from work. The remaining portion of
your time is what is realistically available for formal commitments and
responsibilities. (If you determine that fifty hours is your reasonable
workload, you will need to reserve an average of an uncommitted hour
per day in a five-day week.)
37

38 How do I handle my day-to-day tasks along with managing a project?
Assessing Your Project Management Responsibilities
Next, assess the amount of time your project management responsibili-
ties require. As a general guideline, each contributor you regularly inter-
act with will require about 10 percent of your time. In addition, you
may have other related management responsibilities, such as filling out
reports, assessing and reporting on job performance, managing out-
sourcing relationships, participating in project-related meetings, and
routinely communicating with others outside of your team. When your
overall project management responsibilities exceed 80 percent of your
available time, you will probably have considerable difficulty keeping up
with other responsibilities.
Prioritizing Your Other Responsibilities
List all your nonproject responsibilities, such as ongoing support and
production activities, participation in task forces and organizational
committees, and management requests. Rank order your list using
assessment criteria such as:
g Value to the organization
g Time sensitivity and urgency
g Value to you personally when successfully completed
g Consequences to you personally when not successfully completed
It can be useful to determine both importance and urgency for these
items. Just because a request is urgent does not always mean that it
should be a high priority.
Balancing Your Responsibilities
Insert your project (or projects) into the sorted list just above any of
your current responsibilities that are less important. Assess the time
and effort requirements for all of your responsibilities that are listed
above your project work (if there are any). If the aggregate workload
represented by project work and your high-priority responsibilities
exceeds your available capacity, you will need to delegate (or get others
to delegate) enough of it to make accomplishment realistic.
If the difference is small, you may be able to deal with it yourself by

How do I handle my day-to-day tasks along with managing a project? 39
delegating work for some of your key responsibilities or project activi-
ties. When delegating work, always seek willing owners, and for any
responsibility where you remain ultimately accountable, remember that
some effort will remain yours.
If the difference is large, you will probably have to escalate matters.
You may be able to get your management to reassign some of your high-
priority nonproject assignments to others. If this is impossible (or unde-
sirable), you still may be able to get relief by securing help in doing the
required work. If, despite your best efforts, you are unable to reduce the
workload from your nonproject responsibilities, then you may need to
offload some project work, modify the project baseline, or otherwise
adjust the amount of time required to stay in control of your project.
Part-time project management is rarely successful, however, so you
should anticipate continuing difficulties if you are unable to realistically
allocate a substantial majority of your time to project management
activities.
After balancing your project and other highest-priority responsibili-
ties against your capacity, you might have some residual lower-priority
work at the bottom of your rank-ordered list. If so, you will need to
delegate the work or get it reassigned to someone else. In cases where
the work is truly unimportant, you may even get away with communicat-
ing your intention not to do it, and simply ignore it.
Reassessing Your Workload
The problem of creeping workload is perpetual. Shortly after you have
successfully balanced your responsibilities and given yourself a reason-
able chance of keeping up with your work, you are likely to find yourself
again overwhelmed. Maintaining some slack in your short-range daily
schedules will help, as will judiciously saying ‘‘no’’ to at least some
requests that come your way.
It’s also a good practice to reassess your workload against your
capacity about once each quarter. Work with your team and manage-
ment to delegate and reassign work to ensure that important commit-
ments remain realistic. No one benefits when dates are missed, stress
levels are excessive, mistakes are frequent, and people become burned
out.

General Topic
16. How do I develop and maintain
supportive sponsorship throughout
a project?
All projects need strong sponsorship. This begins with initiation, and
extends through planning and execution. More than anything else, sus-
tained sponsorship requires effective communication.
Establishing Communication
Throughout your project, maintain a basis for frequent, honest commu-
nication. In all communication with sponsors, emphasize factors that
matter to them. When you’re having a problem, stress why resolution is
critical to them. When you have good news, highlight how your news
benefits them.
Establish an effective communication plan for your project, and
review it with your sponsor and key stakeholders. Obtain their buy-in
and approval in support of ongoing two-way communication. Whenever
possible, plan for face-to-face communication.
Initiating Your Project
As soon as you are asked to manage the project, begin a dialogue with
your sponsor to validate the project objectives. Ask questions to deter-
mine why your sponsor kicked off the project and to answer the ques-
tion ‘‘What’s in it for me?’’ from your sponsor’s perspective. Document
the purpose of the project in your project charter and validate your
charter with your sponsor and other key stakeholders. As part of the
chartering process, discuss tolerance for risk and investigate what your
key stakeholders believe may be risky about your project.
Also review your key processes with your sponsor during project
initiation, especially the process for decision making and problem esca-
lation. Set expectations for how you will be communicating requests,
and for how quickly you will expect resolution. If possible, obtain
40

How do I develop and maintain supportive sponsorship throughout a project? 41
approval for a process that allows you to make decisions and move for-
ward if the sponsor is unavailable or fails to respond in a timely way.
Work with your sponsor to organize a project start-up workshop,
and set time aside on your agenda for your sponsor to participate, either
at the beginning or at the end of the workshop.
Planning Your Project
If your project is large or complicated, set expectations with your spon-
sor that will allow adequate time and effort for planning. If your project
planning will take more than several days, update your sponsor at least
weekly on your progress.
As you begin to wrap up your planning process, prepare a summary
of your plans for discussion with your sponsor. Set up a one-on-one
meeting with your sponsor and review your plans. If your plans support
the initial objective for the project, validate them with your sponsor and
set the project baseline. If your plans show that the project objective is
inconsistent with the project’s goals, develop a clear and concise sum-
mary that shows why. Discuss the project’s risks with your sponsor and
use your risk analysis to support a request for budget or schedule
reserve. Use your data to negotiate a realistic baseline for the project
and get approval from your sponsor to proceed.
Executing Your Project
Communicate frequently during the project to keep your sponsor up-to-
date. Avoid needless detail in your communications, but be thorough
and honest in your reporting.
When you do run into problems, communicate the project’s status
promptly and always include your plans for resolution. Use your escala-
tion process only when absolutely necessary, but escalate quickly when-
ever you run into an issue that you are unable to resolve on your own.
Throughout the project, manage changes diligently. Use your sponsor’s
authority to avoid changes that are not necessary.
Most of all, strive to appear competent. Whether you actually know
what you’re doing or not, ensure that it always seems that you do.

General Topic
17. What can I do when my project loses
its sponsor?
Projects always begin with a sponsor. Sometimes as a project pro-
gresses, however, sponsors move on, lose interest, or otherwise disen-
gage from projects that they initiate. Strong sponsorship is essential for
a successful project manager so if you do lose your sponsor, work to
find a new one as soon as possible.
Identifying Sponsor Candidates
Any managers in your organization who will suffer consequences if your
project fails are potential new sponsors for your project. Other possibili-
ties to consider are managers who have the authority to cancel your
project. The best replacement sponsor candidates will be managers
who have a passion for your project’s goals, or who deeply care about
something that is served by the objective. If you find several potential
candidates, initially consider managers who are at a level not too far
above your project and within your own organization.
Selling Your Project
Before you approach a potential new sponsor, summarize your business
case. Begin by developing an ‘‘elevator speech,’’ a short description of
your project that takes no more than a minute to present. In your eleva-
tor speech, stress aspects of your project that you believe will matter
to the potential sponsor. Also be ready to discuss your project vision.
Describe how things will be different when the project is completed, for
the organization as well as for your potential sponsor.
If your potential new sponsor seems reluctant, you may be able to
solicit persuasive help from your former sponsor, managers higher in
the organization, or some of your key stakeholders.
Securing Sponsor Commitment
Build the best case that you’re able to and request a commitment from
your potential sponsor to support your project. If you are not able to
42

What can I do when my project loses its sponsor? 43
get commitment, identify another candidate and try again. Keep working
until you have successfully secured a replacement sponsor.
When you have found a replacement, maintain your new sponsor’s
support through effective ongoing communications, face-to-face meet-
ings, and other regular interaction.

General Topic
18. How can I secure and retain
adequate funding throughout my
project?
The most important factor in ensuring adequate funding is maintaining
strong project sponsorship. As discussed in the previous two problems,
strong sponsorship depends upon keeping the formal commitment of
your sponsor and understanding your sponsor’s perspective on ‘‘what’s
in it for me?’’
Using the Project Business Case
Every project has two financial numbers that really matter. The larger
number (at least it’s assumed to be the larger number) is what the
project is worth—its value. The second number is what the project
costs—its budget. If the business case for the project is sound and the
value is significant, then defending your project funding may only
require periodic reminders of what the project is worth to your key
stakeholders. When setting the project baseline, use planning and other
bottom-up project analysis to justify an adequate budget. Secure a firm
funding commitment for your project baseline, including sufficient
reserve to deal with identified project risks. Maintaining adequate proj-
ect resources begins with setting a realistic budget tied to thorough
project planning.
Shielding your project from cuts also may depend on having a
strong and compelling project vision that vividly illustrates both what
will be better when the project is done and what adverse consequences
are likely if it is not successful.
Communicating Progress
Use your weekly or other periodic status reporting to show progress
against your project baseline, and to emphasize that you are on track
and moving successfully toward closure. Always be prepared to quickly
analyze the impact of proposed changes such as staff reduction or
44

How can I secure and retain adequate funding throughout my project? 45
reduced funding. At the first rumors of cuts, prepare a summary show-
ing the impact of the changes, in terms of schedule delays, reduced qual-
ity or other scoping changes, or increased project risk. Discuss the
consequences of such changes with your sponsor and other key stake-
holders, relying on plan-based data, not just vague paranoid-sounding
worries.
Protecting Your Priority
Regardless of how persuasive you might be, there are times when cuts
must be made in organizations. Best-in-class organizations manage such
‘‘right-sizing’’ (or whatever the currently favored euphemism may be)
using priority analysis and portfolio management. They defer or cancel
projects that are less important, and maintain funding, sometimes even
increasing it, for the most critical projects. This approach, however,
requires good data and a lot of effort, so many organizations use the
simpler method of across-the-board cuts. If the organization needs to
save 10 percent, all projects have their budgets reduced by that amount,
often through staff layoffs.
Even in the face of flat reduction goals, though, priorities do matter.
If your project has an attractive business case, recognition of the impor-
tance of your project may be obvious. If you are nearing project comple-
tion, enhance your priority by emphasizing any timing consequences
resulting from funding or staffing reductions. For some projects, comple-
tion and delivery of results may well be a critical component in dealing
with the problems that led to the cutbacks. When facing organizational
resource reductions, ensure that your sponsor and stakeholders have
all the justification for your project that you can provide to them. Work
through them to increase the priority of your project relative to compet-
ing projects and other ongoing endeavors.

General Topic
19. Can the project management
function be outsourced?
Depends on:
g The relationship of the project to other work
g Whether the project relates to an organizational core competence
Avoiding Outsourced Project Management
This problem may be the easiest in the entire book; the answer to this
question is almost always ‘‘no.’’ Effective project management is so thor-
oughly woven into the fabric of an organization that outsourcing should
be considered only as a last resort. Organizations implement their strat-
egies through projects, so it’s good practice to ensure that project man-
agers understand and care about the business. Having project managers
in charge who work for other organizations can result in potential moti-
vation and alignment issues, and may lead to conflicts of interest and
other difficulties.
Many projects are undertaken as part of ongoing and long-term
organizational objectives, for which there may be important subject
matter and process considerations. If project managers are not part of
the permanent organizational picture, necessary competencies to sup-
port future work and new initiatives may be unavailable.
In addition to all of these considerations, very few projects are
undertaken in a vacuum. Project managers responsible for related proj-
ects must communicate effectively and work together seamlessly. Proj-
ect leaders who are outsiders can cause significant problems on large
complex programs, and may also impede smaller project efforts where
frequent interaction is necessary.
Outsourcing decisions can consume a lot of effort, but it can be dan-
gerous and expensive to take shortcuts. Too frequently, organizations
decide to outsource work based upon the answers to two overly simple
questions. The first question is: ‘‘Is this project necessary?’’ When the
answer is ‘‘yes,’’ it’s followed by the second question: ‘‘Do we have any-
one available to lead the project?’’ Because the answer is almost always
‘‘no,’’ the outsourcing option can be nearly inevitable. Although there
are cases where outsourcing project leadership can work well, hiring
46

Can the project management function be outsourced? 47
outsiders to run projects based only upon the answers to these two
questions can be disastrous.
Adopting Outsourced Project Management in Exceptional
Circumstances
There are exceptions to most rules, however, including this one. Out-
sourcing project management can be a very good decision in any situa-
tion where the project involves work with which no one in your
organization is familiar, especially if it is unlikely to be repeated in the
future. Projects to convert to new software, hardware, systems, or other
new infrastructure may be most efficiently and inexpensively completed
using project teams and managers who specialize in the work that is
necessary. Outsourcing may well be the best solution for any one-off
project that is mandatory but that has little or nothing to do with the
ongoing work of the organization.
Another key consideration when thinking about outsourcing project
management is the amount of project independence. If the project truly
has nothing to do with other current project work, outsourcing it may
be a good option. This works best when the technology involved is not
considered key to any organizational strategy.
One final situation where outsourcing project management can
make very good business sense is where an entire project is totally out-
sourced, along with all potential follow-on projects. When a part of your
operation can be logically separated from other activities, hiring an out-
side firm to take full responsibility for it on a contract basis may be a
good option. Some examples of this include ongoing support for obso-
lete products that remain under warranty, the production of noncritical
but necessary components, or any other functions that you believe may
be more efficiently handled by someone outside of your business. Again,
this works best when the project work is not related to anything consid-
ered organizationally strategic and can be completely disconnected
from other activities.

General Topic
20. How can I ensure good project
management practices during
organizational process changes?
Depends on:
g The size of the organizational changes
g The source of the organizational changes
Anticipating Changes
Organization change is inevitable, and in some organizations it occurs
with bewildering frequency. It helps if you can see it coming, so be on
the lookout for potential reorganizations or management changes, wide-
spread problems that someone will have to deal with (sooner or later),
and anything significant that has the rumor mill buzzing. During times
of organizational change, your current project management practices
may be threatened, but with prudent preparation you can protect—
possibly even improve—them.
Preserving Effective ‘‘As Is’’ Processes
If possible, involve yourself in the organizational change project and
work to include useful current project management practices in the ini-
tial process documentation. As the change project’s objectives come
into focus, consider the relationship between project management and
the overall project goals. Identify how your current project management
practices support the desired changes. Also consider possible project
management process improvements that could be integrated into the
overall changes.
Integrating Project Management into the New ‘‘To Be’’ Processes
As the new processes are defined for the organizational change, identify
any proposed modifications that relate to project management. If there
48

How can I ensure good project management practices? 49
are threats to good project management processes, work to minimize
them. If the changes involve new management who appear to be hostile
to good project management process, work to build support and com-
municate the effectiveness of what you’re doing today. Use results, met-
rics, and success stories from well-managed projects to demonstrate
the value of good project management. Build management support by
documenting the benefits achieved by successfully managed projects.
As plans for changes to organizational processes come together,
identify opportunities to include project management practices and
deliverables in communication and training materials. If organizational
changes could directly or indirectly have an adverse impact on how
projects are managed, approach the people who are responsible for the
changes and work to help them understand the problems that this will
cause. Monitor pilot programs and provide feedback if the changes are
having a negative impact on projects. Work to help adjust new pro-
cesses so that they incorporate methods for project management that
are at least as good as what came before.
Standardizing the New Processes
Update your documentation for current project management processes,
and if possible, contribute similar content to the documentation associ-
ated with the new organizational process. If you’re not able to get
directly involved, at least work with the people who are responsible to
ensure consistency.
If there are any changes to project management processes as part
of an organizationwide change effort, explain them to your team, your
sponsor, and your key stakeholders. Work to establish their support and
buy-in.

General Topic
21. What is the best structure for
program management for ensuring
satisfactory customer results?
Depends on:
g Overall complexity
g Program size
Dealing with Programs
The principles of project management work best with relatively small,
straightforward undertakings. As the magnitude and complexity of the
work increases, project management practices are no longer sufficient,
so your success will also depend on program management principles.
Complexity has several dimensions. Technical complexity is related
to the deliverable and the processes required by the work. Another
aspect of complexity arises from the number of independent teams of
people who must work together, and complexity grows significantly if
any of the teams involved are from different organizations. The expected
magnitude of the undertaking also matters, and whether measured by
overall staffing, the budget, or the number of involved locations, size
increases the number of potential failure modes. To effectively deal with
all of this, program management relies heavily on the principles of
decomposition and delegation. Programs are broken up into projects
where the work teams can be managed independently by project leaders
who have responsibility for interrelated projects small enough to be
consistent with project management practices.
A number of later problems in this book will discuss program man-
agement practices related to planning and execution, but doing this well
depends on setting up a program office and establishing effective com-
munication.
Establishing a Program Ofice
For modest-sized programs having a small number of independent
teams and manageable complexity, there may be little need for a pro-
50

What is the best structure for program management? 51
gram staff or centralized processes. As programs grow in size, however,
a program office becomes a necessity. The program office for a substan-
tial set of interrelated projects will have a potentially sizable staff. Func-
tions that may be managed by members of a program staff include:
g Identifying and documenting processes to be used for the program
g Establishing and enforcing program policies, methods, life cycles,
and review policies
g Providing education, training, and consulting
g Supporting project planning
g Assisting with facilitation of project meetings
g Establishing centralized contracting, time tracking, and financial
practices
The program staff also has responsibility for overall program planning,
risk management, resource analysis, and program-level reporting. The
size of the program staff will scale with the size and complexity of the
program, but typically it will have approximately one person for every
twenty people associated with the overall program.
Communicating Effectively
Program communication requirements are very complicated. Internal
communications involve inbound status sent from the project leaders,
broadcast messages to the project leaders, and even more messages
among the project leaders. External communications include interac-
tions with customers, stakeholders, steering committees, and others.
Program control relies on effective and well-organized online pro-
gram information storage with both adequate access for all contributors
and appropriate security. It also depends on frequent, clear communica-
tion of program status information, and open two-way communication
encouraged at all levels of the program hierarchy.

Initiation Topic
PART 2: INITIATION
22. How do I effectively manage
customer expectations?
Depends on:
g Having a known or single customer versus having a ‘‘market’’
customer
g Having users who may not be the economic buyer
Uncovering Needs and Wants
Work with your sponsor and key stakeholders at the beginning of the
project to glean what they know about the customer’s needs. Document
what is thought to be known and work to verify your information
directly with customers and users. If the customer is known, set up
meetings to discuss what the project will deliver. Whenever possible,
watch the customer work in the environment where your project deliv-
erable will be used; there may be big differences between what custom-
ers will tell you and what they actually do.
Some projects engage in product development for users who are
part of a market and cannot be identified in advance. If this is the case,
plan to meet with past customers who are thought to be representative
of the intended users for your new project’s deliverable. Consult avail-
able information about your prospective customers, and when neces-
sary, plan and execute market research among target customers to
better understand the market and its requirements.
Work to validate the requirements for your deliverable. List both
what the deliverable is and what it is not. The first list will include all of
the requirements you have validated as mandatory for your project. A
good is not list isn’t simply a list of ridiculous things that no one would
ever imagine as part of your project. It includes reasonable features and
potential requirements for your deliverable that customers would prob-
ably find desirable, but that you nevertheless plan to exclude from your
project.
An is not list can be a very powerful tool for managing customer
expectations. The list of things you will not deliver sets boundaries
for your project, and it provides a comprehensive basis for scoping
discussions with your users and customers. Some of the things initially
53

54 How do I effectively manage customer expectations?
listed on your is not list will be acceptable, and discussing them will
enable you to eliminate them from customer expectations. Other items
listed will inevitably be unacceptable, and discussing them will pro-
vide you guidance for adjusting your project scope. Either way, docu-
menting both what your deliverable is and what it is not will help
ensure consistency in how you and your customers perceive the proj-
ect scope.
Investigating Feasibility
When defining project scope, also work to determine what is possible
and what is not. If you suspect that some aspect of your project delivera-
ble is infeasible, initiate project activities to investigate. If your investi-
gation shows that something expected by your customer is probably
impossible, document why and use your data to discuss it with your
stakeholders and customers to ensure that it is excluded from the
scope.
As an alternative, if some aspect of your project appears excessively
risky, make firm commitments only to what you realistically believe that
you can deliver. It is always better for projects to underpromise and
overdeliver than to do the reverse.
Documenting Scope Clearly
Customer expectations are set in the beginning of the project, but they
matter most at the end. Meeting customer expectations requires that
you establish and validate the evaluation and acceptance criteria early,
so when they are applied at the end of the project there will be no sur-
prises. Doing this as part of initial project scoping is effective in ensuring
that you understand why each requirement in your project scope is
important to your users, and how they will judge whether you have met
their needs. Establishing validation criteria at the beginning of the proj-
ect will also help you to eliminate any requirements that are not manda-
tory.
Throughout your project, manage your customers’ expectations
using ongoing discussions; feedback from testing; demonstration of
prototypes, pilots, mock-ups, and intermediate deliverables; and other
periodic customer interaction. For lengthy projects, revalidate your
requirements at least every six months, using additional customer inter-

How do I effectively manage customer expectations? 55
views or market research as necessary. Scrupulously use a well-defined
change management process similar to that described in Problem 84.
Work closely with your customers and stakeholders to manage expecta-
tions following any accepted change that results in significant scope
modification.

Initiation Topic
23. How can I reconcile competing
regional/cross-functional agendas?
Depends on:
g Sponsorship authority
g Alignment of priorities
Establishing One Version of the Truth
At the first signs of disagreement over matters that could significantly
affect your project, begin to draft a single document that you can use to
summarize any controversies. Start the document by listing everything
generally related to the conflict (or potential conflict) where there is
general agreement.
Next, identify aspects where you are aware of, or suspect that there
may be, differences of opinion. Before adding anything about them to
your document, consider how you would prefer to deal with each one.
Ultimately it’s your project, so your opinion matters a lot, and it also
represents what you think will be the best route to project success. Note
your preferences for each of the open issues, and then document any
other perspectives that you are aware of.
Next, set up a meeting with your sponsor to discuss the situation.
Outline the points of general agreement to your sponsor, and then
explain the reasons for your preferences on the remaining issues. In
your presentation, emphasize how your recommendations contribute to
goals that you know are important to your sponsor. Sponsors can react
to controversial open issues in one of three ways. The most desirable
response is that they agree with you and will use their authority to inter-
vene and resolve the conflict. A second response is that they favor your
recommendation but either do not wish to get involved or lack the
authority to make much difference. The third possibility is apathy—they
do not have an opinion and are content to leave things up to you.
For issues where your sponsor is willing and able to intervene on
your behalf, you can at least tentatively move the item into the upper
portion of the document containing areas of agreement. (Even in cases
where decisions can be forced using higher authority, it is always a good
idea to verify that they will be accepted with minimal hard feelings. Get-
56

How can I reconcile competing regional/cross-functional agendas? 57
ting your way through force and aggravating people you must work with
in the process may do your project more harm than good.)
In cases where your sponsor supports your position but will not or
cannot force the issue, include his or her preference on the list along
with yours. In the worst case, where your sponsor declines to get
involved, you will need to proceed on your own. For both of these situa-
tions, you will need to negotiate and find compromises.
Building Consensus
Identify all the stakeholders whom you want to come to agreement. To
the best of your ability, list them in order of relative organizational
authority. Set up a meeting with the individual with the most power and
influence on your list to discuss your document. Verify agreement with
the items at the beginning of your document, including any of them
where your sponsor has intervened. For the other items, verify stake-
holder agreement with your position for all items where you concur. For
the items where you disagree, ask about priorities and motivations and
probe to discover the sources of conflict. As you proceed, note your
stakeholder’s expressed preferences for each controversial item, adding
them to your document. Without making any commitments, promise to
return to discuss this further.
Schedule similar individual discussions with your other stakehold-
ers and use what you learn with each to guide your discussions with
those who remain. Get a good sense of where people agree with your
recommendations and where they do not. Where there are differences,
determine how much each one matters. Work to determine if any of your
stakeholders might escalate any residual disagreements into project
showstoppers.
For some controversial items, there may be a solid majority of the
stakeholders in agreement with your recommendation. If so, poll the
minority to see if they all might be willing to acquiesce. For matters
where you can generate acceptance, document the majority position
and move on. If there is a majority in favor of a position that you dis-
agree with, assess how much adopting it would affect your project. If
you decide that you can live with it, capitulate.
For any issues that remain, there are other tactics to try that may
lead to resolution. You can meet together with the stakeholders who feel
most strongly—pro and con—about an issue to see if coming together
might result in agreement. Sometimes ‘‘getting all the liars in the same
room’’ will cause opinions to shift. There may also be options beyond

58 How can I reconcile competing regional/cross-functional agendas?
those already being considered, and a ‘‘third way’’ compromise might
emerge that would be acceptable to all.
As a last resort for issues where discussion and principled negotia-
tion fails to bring agreement, you may need to escalate to higher author-
ity. Even if sponsors and managers initially appear indifferent, you will
usually be able to engage them in dealing with matters where your proj-
ect’s success or failure hangs in the balance.
Documenting Agreement
Update your summary with all the items and their associated decisions.
Circulate it to your sponsor and stakeholders, verify their acceptance,
and use the decisions to guide your project.

Initiation Topic
24. How should I effectively deal with
contributor hostility or reluctance during
start-up?
Project contributors tend to be either allies or adversaries. During initia-
tion, you will need to identify all those who are adversaries and either
convert them into allies or determine how to proceed, either by doing
without them or by finding a way to deal with the effects of their behav-
ior on your project.
Determining the Need for Involvement
If someone on your project team is not supportive of the project, deter-
mine if their participation is essential. Investigate alternatives, such as
using different contributors with similar skills and talents, or other
methods for completing project work that could be delegated to others
on your project team. On some projects it may even be possible to do
without one or more of the contributors who are initially assigned to
your project entirely. If you have a good alternative, adopt it, and
remove unnecessary staff members who seem likely to impede your
progress.
Converting Adversaries
If there are no good options other than working with someone who
seems hostile to your project, find out why the person feels this way.
Some people are negative because of interpersonal reasons. Others may
simply be opposed to the project. If you don’t know why a team member
seems indifferent or antagonistic, meet with the person and discuss the
situation.
If the problem is interpersonal, you may be able to resolve it by
building rapport and teamwork. Establishing relationships and trust is
essential to gaining the cooperation of reluctant staff members. Work to
find things that you and other team members may have in common with
recalcitrant contributors, such as interests, studies, hobbies, past proj-
59

60 How should I effectively deal with contributor hostility?
ects, likes, dislikes, or anything at all. Identify colleagues whom you
have in common, especially people for whom you share mutual respect.
Involve reluctant team members in project planning and decision mak-
ing, using their inputs and showing that their contributions are valued.
If the problem is a poor (or nonexistent) relationship and you can
improve it, your project will benefit.
You may also be able to effectively deal with cases where you have
a contributor who opposes your project. Begin your discussions by dis-
covering why your team member is against your project. Perhaps the
other person really does not understand your project, or has no aware-
ness of why it’s necessary. Discussing the project can bring hostile
contributors around, especially if you have a compelling vision to com-
municate showing why the project is important to the organization and
to others. If there are aspects of your project that resonate with your
team member’s individual priorities, emphasize them. Even if the proj-
ect as a whole fails to motivate, some aspects of it may be attractive—
for example, training opportunities, visibility to management, or access
to information or new technology. Connecting your project to what peo-
ple care about can go a long way toward converting adversaries into
productive contributors.
If you are successful in gaining the support of unenthusiastic team
members, it will make the rest of your project a lot easier. If, despite
your best efforts, you find that you are stuck working with someone who
remains hostile, you will need to deal with it. For work delegated to a
team member who is adversarial, ensure that you will have ample and
frequent information about progress (or lack of progress) and effective
methods for escalation if there are problems. It’s also best to set up the
project so that any contributors who might damage team cohesion and
cooperation are as isolated from others as possible. You can be success-
ful leading unfriendly and argumentative team members, but it’s a lot of
work and you must guard against having adversarial attitudes damage
the morale of the whole team.
Maintaining Alliances and Seeking Alternatives
Establishing support at project initiation is necessary, but not sufficient.
You must sustain the initial buy-in throughout your project using
rewards, recognition, and positive feedback. Keep criticisms and nega-
tive feedback in reserve, using these only as a last resort to keep things
moving. Even if you find it necessary to isolate some contributors from

How should I effectively deal with contributor hostility? 61
team interactions, you will need to invest in frequent one-on-one com-
munication and vigilant monitoring of all delegated work.
It’s also prudent to have some contingent options available in the
event that relationships deteriorate enough to threaten to derail your
project. Investigate potential recovery tactics such as outsourcing, pro-
active skill building and training for more cooperative team members,
use of alternative methods and technologies, or anything else that might
work.
If you can convert an adversary into an ally, that’s great. Project
managers need all the friends they can get. However, if you do find it
necessary to complete a project where one or more key contributors
have remained adversaries throughout, spend some time to reflect on
how you will avoid this on your next project.

Initiation Topic
25. When is a project large enough to
justify investing in a two-day project
launch?
Depends on:
g Project size and complexity
g Project priority
g Cohesion of the team
Justifying a Launch Meeting
Whether it is called a project start-up workshop, a launch, a kickoff,
an initiation, or something else, an early meeting involving the project
contributors is a great way to get a project off to a fast start. The dura-
tion of the meeting has a lot to do with the specifics of the agenda, which
often includes:
g Presentations and discussion of the overall project
g Project-planning activities
g Team building
g Delegating responsibilities and obtaining buy-in
If there has been a good deal of effective communication, most contribu-
tors know each other, and the project is not very complicated, a half-day
or even shorter meeting may suffice. For more complex, larger projects,
however, a productive agenda can easily run to two days or even longer.
The point is to set up a start-up meeting that will save more time on the
project than it uses, regardless of its length.
Sizing the Meeting Agenda
In general, a launch meeting should have a duration of approximately 1
percent of the overall projected project length. A project expected to
take about 200 workdays, roughly ten work months, can easily justify a
two-day start-up workshop. Shorter projects that are complicated or
62

When is a project large enough to justify investing in a two-day project launch? 63
novel will also profit from a couple days of focused work and discussion.
Another consideration for setting the length of the agenda is the relative
familiarity of the people on the project team. If the team has never
worked together before, the meeting will provide the initial foundation
the project will depend upon for effective teamwork, and this does take
time. This aspect of a project kickoff meeting is particularly important
for project teams that are geographically distributed and do not expect
to see much of each other during the project. One of the main objectives
of an effective project launch is to build a high-performing team; without
sufficient face-to-face time this will be very difficult, if not impossible.
Evaluating Trade-Offs
If obtaining approval for an in-person, multi-day project start-up meeting
proves difficult, develop data estimating both the cost of holding a meet-
ing and the cost of not doing it. While the costs of doing such a meeting—
travel, logistics, hours of people time—are generally easy to assess, the
costs of not conducting the meeting may be less obvious. In addition to
the loss of an excellent opportunity to build teamwork, relationships,
and trust, there are other substantial costs associated with not holding
a project launch. The concentrated effort of a project kickoff exercise
combines the high energy of the start of a new project with a tight focus
on its initial planning and setup. A day spent in a project start-up work-
shop, particularly when conducted off-site with minimal distractions,
can equal several days of effort spent in a normal work environment.
Another significant opportunity cost borne when project launch activi-
ties are shortchanged is the increased risk associated with a less cohe-
sive understanding of the project and inadequate collaborative analysis
of potential problem areas.

Initiation Topic
26. How do I establish control initially
when my project is huge?
Very large projects, or programs, require a hierarchy organizing them
into smaller undertakings where leadership, organization, and coordina-
tion can be delegated.
Decomposing Big Projects
Project management practices work best on projects of modest size.
One way to take advantage of this on large programs is to break them
up into smaller undertakings. The resulting projects may be controlled
and managed by project leaders responsible for portions of the work
that can be well managed. Decomposing programs into projects tends to
be an iterative process, because the size, complexity, and often initially
incomplete definition of major undertakings make it very difficult to get
right on the first try.
Program decomposition works similarly to the work breakdown
process of project management, and the objective is the same—defining
manageable, better understood units of work that are equivalent to a
large, chaotic-looking whole. The initial process step involves logical
analysis of the entire job, looking for pieces that can be separated and
managed autonomously, or at least mostly autonomously. The first step
is often assigned to specialists, such as architects and urban planners
for construction projects, systems engineers for hardware projects,
software architects for applications, or other high-level experts associ-
ated with large projects of other types.
Program decomposition has two main goals. The first goal is to
establish projects that are small enough to be independently managed
well by project leaders using the principles of project management. The
second goal, which is equally important, is to identify all significant
interconnections between the projects and to minimize their number.
Control at the program level depends on delegation to project leaders
who will competently manage the project work for which they are
responsible, and also on identification and management of each of the
interproject dependencies. When there are too many interface connec-
tions between projects within a program, it is a sign that you should go
64

How do I establish control initially when my project is huge? 65
back to the drawing board and try again. A program with ten projects
and 500 interproject dependencies will be unmanageable. The goal of
the decomposition process is to establish a hierarchy, with multiple lev-
els if necessary, where the component projects are sufficiently indepen-
dent that the project leaders can focus primarily on the work of their
teams, and where there are no more than about a dozen interfaces to
track in each reporting cycle for the program.
Initiating and Planning Programs
Program control begins with identifying competent leaders for each
project. Seek project managers who are experienced in the work and
can make a full-time commitment to the program. Effective delegation
requires buy-in and ownership, so involve all of the project leaders in
program definition and planning.
Successful program and component project planning depends on
clear program-level definition information. Clearly define and communi-
cate all expected life-cycle deliverables and testing and acceptance cri-
teria. Work with your project leaders to ensure a consistent, shared
understanding of your program objectives so that the work they manage
independently will remain consistent.
Program and project planning will begin in parallel. Following pro-
gram decomposition and assignment of project leaders, the next step
is to have the project leaders develop plans for their projects. When
completed, these individual plans can be pulled together by the pro-
gram manager, who works with the project leaders to find issues. The
list of issues, along with any suggestions for resolution, may then be
used to start a second planning iteration. Your goal is to build an inte-
grated set of project schedules for the work through a sequence of plan-
ning iterations. Using the individual project plans, you can build an
overall program plan documenting all significant interproject dependen-
cies. The process for doing this is explored in Problem 56.
Your success, especially in very long duration programs, also
depends on periodic review and adjustment of plans and objectives.
Schedule ‘‘rolling wave’’ planning exercises at least every six months
throughout any major program.
Managing Interactions and Communication
Program control also depends upon establishing a solid infrastructure
for both formal and informal communications. Ensure that overall pro-

66 How do I establish control initially when my project is huge?
gram communications are well integrated and coordinated with proj-
ect communications, and establish sufficiently formal processes for
program-level issue tracking, change control, and risk monitoring. Link
defined project-level processes with analogous program-level processes
that will allow you to detect and manage anything that could have pro-
gramwide impact.
Periodic program staff meetings also contribute to control, whether
held for specific activities such as program start-up or focused on pre-
sentation of overall status. Even teleconference meetings that primarily
broadcast information to large, geographically separated teams can be
quite effective, especially if you provide adequate opportunity for ques-
tions and feedback.
Establish centralized archiving for project information, either inte-
grated with your program management information system or linked to
it. Ensure that all who need it have continuous access to the information
they need for their work, and organize it for easy access. Provide
program-level status reports at least monthly, and establish two-way
project and program status reviews with program staff and project lead-
ers at least weekly. Work to detect issues that might affect the program
early, and try to resolve them before they become unmanageable.
Finally, while establishing good teamwork among all of the dozens
or hundreds of contributors is unlikely, program health depends on
good teamwork within each of the individual teams that do work
together. Encourage each project leader to maintain good relationships
within his or her project team. Build teamwork among your program
staff or program office. The community of project leaders is the ‘‘core
team’’ for the program, so you also need to maintain an environment
that promotes their ongoing smooth collaboration. Anything that you
can do to sustain friendly cooperation throughout the program staff will
contribute to overall control.

Initiation Topic
27. How should I initiate a new project
with a new team, or using a new
technology?
Establishing Relationships
With a new team, a project start-up workshop or launch, discussed in
Problem 25, can be an excellent way to get relationships started. Also,
take advantage of all face-to-face meetings and conversations to learn
more about the people on your team. Spend time initially exploring and
defining roles and responsibilities on your project, so everyone knows
how and where he or she fits on the team. Plan and make decisions
together, so that all will have contributed to setting up the project and
will see the overall effort as ‘‘ours,’’ instead of ‘‘theirs’’ or just ‘‘yours.’’
Also, involve your team in making process and other decisions about
how the project will be run.
Specific activities can bring the team together, whether they are
related to the project such as those above or not. It can be very effective
to do something fun as a team, particularly if it helps to break up a
lengthy planning or kickoff meeting. If you do decide to set up an extra-
curricular activity with a new team, verify that everyone will willingly
participate and find it enjoyable; it will not help teamwork to take a team
prone to seasickness on even a short sailing trip. Eating is one thing that
everyone has in common, and it can be an excellent way to build rap-
port. Provide snacks at meetings, and look for other times when you and
your team members can eat together. Again, involve the team members
in decisions about what to eat; not everyone will like, or can even eat,
everything you may enjoy.
If you detect any signs of reluctance or hesitation from some of the
people you do not know well, try willing them over with some of the
ideas in Problem 24.
Dealing with New Processes or Technology
Projects are all unique, and when the differences between the current
project and your past experiences are significant, you need to deal with
67

68 How should I initiate with a new team or new technology?
them. If you face technology challenges, discuss them with your sponsor
and key stakeholders and set expectations appropriately. Learning
curve issues can be significant. Overcoming them will probably require
at least time, and perhaps additional funding. If training, new equipment,
travel, or other investments will be needed, discuss this with your proj-
ect sponsor and negotiate for appropriate funding.
Opportunities for learning may be desirable to your contributors, so
use the adoption of new technology or methods to motivate your team
members who are interested in improving their knowledge and skills. If
some team members are resistant to adopting novel methods or uninter-
ested in emerging technology, either mentor them to help them adjust
to and accept the changes, or involve them in parts of the project that
will be less affected by them.
Adopting new approaches to your work can be a great way to keep
things fresh and interesting, so be on the lookout for opportunities to
improve your project methods and deliver better results. It can also be
a lot easier to get people excited and engaged in a new project when
there are elements of innovation; few people want to do essentially the
same project over and over.

Initiation Topic
28. How should I evaluate and make
‘‘make vs. buy’’ project decisions?
All projects face alternatives in how to approach the work. Some organi-
zations have deeply embedded ‘‘not invented here’’ cultures and they
tend to reinvent the wheel whenever possible. Other environments are
prone to taking shortcuts, with a bias toward cobbling together solu-
tions using off-the-shelf components even where it might compromise
the deliverable. The best approach varies with the project, so a good
decision process is needed. The main considerations should be cost,
fitness, timing, organizational needs, and effect on the team.
Considering Costs
Cost analysis of the make vs. buy decision is often paramount in decid-
ing which course to take. Although this might seem easy, doing it well
can be quite involved. On both sides there is a tendency to underesti-
mate, so it helps to be somewhat skeptical.
The cost of using something purchased includes the direct, out-of-
pocket purchase price, but it does not necessarily end there. You may
need to customize, install, or otherwise invest effort before you can use
it. There may be training and learning curve considerations as well, so
it is easy to misjudge the eventual cost of employing available compo-
nents. Alternatively, the cost of making what you need yourself starts
with purchasing any raw materials and includes the cost of all the labor
to complete it. Detailed planning for these activities is not usually avail-
able when deciding whether to purchase something or make it yourself,
so effort estimates tend to be based on high-level analysis (or ‘‘guesses’’)
and can be wildly optimistic. When contrasting estimates, consider their
sources and whether anyone providing data has any related or vested
interests.
Considering Fitness
Fitness is usually not difficult to assess, assuming that your project is
reasonably well defined. The fitness of what you can make is generally
69

70 How should I evaluate and make ‘‘make vs. buy’’ project decisions?
assumed to be very good, or you wouldn’t be considering making it in
the first place. Fitness assessment of purchased components may also
be straightforward, especially if you have applicable experience from
past projects. Significant variance between what you can purchase and
what you need will drive the cost estimate up, perhaps even ruling out
the ‘‘buy’’ option.
Considering Timing
Some projects are under severe time constraints, making realistic
scheduling assessments a major decision criterion. As with cost, the
accuracy of timing estimates depends a lot on the quality of the analysis.
It is easy to underestimate the duration for building a part or component
when all the planning information is embryonic. Also, while a purchased
component may seem to represent essentially no time investment, addi-
tional time for customization or other work may be necessary, and ship-
ping times for things that are not sourced locally can be substantial.
Considering Organizational Needs
Deciding whether to make or buy what you need can also have organiza-
tional impact. Things to consider outside your project include:
g Is the component to be purchased related to an identified core
competence?
g Will there be a potential competitive advantage in building the part
yourself?
g Will a bought component affect ongoing support or warranty costs?
g Are there long-term considerations that could have consequences
for future projects (such as potential reuse and leverage of in-house
development)?
Considering Your Team
Finally, routinely purchasing what you need can affect team motivation.
When most of what you need is purchased or outsourced, your team
members may start to fall behind in their areas of expertise. If there are

How should I evaluate and make ‘‘make vs. buy’’ project decisions? 71
few opportunities for personal development and skill building, contribu-
tors may start to disengage, and staff turnover can become a problem.
Making a Decision
When faced with a make or buy choice, assemble what you know about
each of your options. If there are considerations beyond the ones men-
tioned here, include that data too. Line up the information for your
options against your project objectives and constraints and objectively
weight them based on their relative importance. Use your best judgment
to select the option that best fits your project.

Initiation Topic
29. How can I quickly engage good
contract workers?
Hiring outside help has become extremely common on projects. It can
be an effective way to add project team members quickly, but it can also
be frustrating and consume much more time than expected.
Getting Help
Project leaders are not generally hiring professionals or contract spe-
cialists. If you need to augment your project staff quickly, enlist the help
of people who know what they are doing. Some possibilities for this
include your legal department, the human resources department, con-
tracting specialists in your purchasing department, outside profession-
als who work with temp agencies, and lots more. Depending upon your
organization and your specific needs, someone should be able to help.
If you have past experience working with contract help on projects,
take advantage of it. Even if you don’t have direct experience, you may
have peers or colleagues who do. Consider your own experiences and
those of other project managers in identifying individuals or agencies
that could probably meet your needs. Bringing outside staff up to speed
quickly is easiest when you are able to get people with relevant prior
experience.
If you are starting something new or for some reason there is little
past experience to rely upon, cast a very wide net. Finding qualified help
fast is easiest when you have lots of options. Consider all reasonable
alternatives for publicizing your opening, including online posting ser-
vices, local professional societies, and networks of your peers. It’s
always better to have too many resumes to look at than too few. Win-
nowing a large pile of choices is a lot less trouble than trying to move
forward using a tiny list of unqualified candidates.
Pick a small number of promising candidates and invite them in for
an interview, or at least a telephone screening. Focus your discussions
on the work that the person you need to hire will do, and develop a
feeling for each candidate’s competence. Also discuss rates, timing, and
any other constraints to ensure that the individuals you are talking to
can meet your needs.
72

How can I quickly engage good contract workers? 73
Closing the Deal
Work quickly to evaluate the candidates you’ve spoken with and make
your choice. Even after you have located someone whom you would
like to hire, there is still potential for delay. Whenever possible, take
advantage of preprinted contract forms that have been approved by
your organization. This not only speeds the process, it also ensures that
all required legal terms and conditions are included. If the first candi-
date you approach suggests significant changes to the standard con-
tract terms, quickly investigate what this might entail. Changing
contract terms often involves lawyers and can take weeks, if not months.
It may be more desirable to go with your second choice than to wait for
a modified contract to be approved.

Initiation Topic
30. In a large project, when should I
seek commitment for overall funding?
Depends on:
g The type of project
g The novelty of the technology and process to be used
g The precision required for the funding decision
Making the Business Decision
For very large projects, there is often some funding for preliminary
investigation. This initial funding usually ranges from about 2 percent to
10 percent of the expected overall project budget. Going into this phase
of the project, overall estimates tend to be ‘‘rough order of magnitude,’’
in a range that can be plus or minus 50 percent. During the initial investi-
gation, more precise information about scoping, planning, cost estimat-
ing, and other details will be developed.
You will seek formal project approval and committed funding when
you have sufficient information to make the transition from initial inves-
tigation into development. Exactly when in a project timeline this is
done depends a great deal on the type of project. For projects under-
taken on a contract basis, preliminary investigation concludes with
writing a proposal. Guidelines for creating commercial proposals recom-
mend that the pre-bid effort be funded at a minimum of 2 percent of the
anticipated bid price. For research and development projects, 5 percent
of the time and funding expected for the overall project will typically be
spent in investigation—more if the effort is novel, complex, or otherwise
expected to be risky. Other types of projects may use 10 percent or
more of the projected total funding before making a business decision
to commit to the project through to completion.
Based on your feasibility investigation and planning, there may be a
significant difference between realistic funding and preliminary expecta-
tions. A good business decision relies very heavily on appropriately
adjusting expectations. Business funding decisions may carry the proj-
ect forward as initially envisioned, cancel the effort altogether, or pro-
ceed with modifications.
74

In a large project, when should I seek commitment for overall funding? 75
Accounting for Risk
Size is a significant risk factor, so funding for very large projects should
include funding for contingencies. Alternatively, project funding may be
committed only phase by phase as the project proceeds. Projects that
are funded one phase at a time are generally approved based on range
estimates, where the low end of the range is derived from the best cur-
rent overall plan and the high end is based on risk analysis.
Adjusting the Funding Commitment
Regardless of initial funding, lengthy projects will probably be modified
as they proceed. Project changes are common during scheduled project
reviews at life-cycle transitions, or about every three to six months. As
projects progress, you learn more about them. Months into the project
you will be aware of things that you could never have known at the
beginning. The more you discover, the more your ability to size the proj-
ect improves. Following significant changes, you will probably find it
necessary to adjust funding and re-baseline your project.

Initiation Topic
31. When working with extremely
limited resources, how can I get my
project completed without doing it
all myself?
Not every project begins with adequate resources. If you have a well-
defined project but insufficient resources to get it done, you’ll need to
identify and secure commitments for help.
Planning the Work
The first step in getting help is finding out exactly how much trouble
you’re in. Based on known scope, develop a list of necessary activities
and the skills required to get them done. Make a rough assessment of
how much overall effort you will need from each type of contributor
your project will need. Also determine your available capacity using
team members already assigned to the project. Involve current contrib-
utors in your analysis, and use their help to estimate how much addi-
tional effort will be required.
Negotiating for Help
Discuss your situation with your project sponsor, and use your effort
estimates to request additional staffing and justify the assignment of
more people to your project. If you’re unsuccessful in obtaining new
resources from your sponsor, at least enlist his or her help in requesting
staffing from others in your organization.
Approach managers and individuals who may be able to help you
cover any area where you have insufficient staffing. Use your influence
to request help, starting with people who owe you favors. When you
approach people to ask for help, consider what you may be able to offer
to them in return for a commitment to work on your project. Prospec-
tive team members may want to work with you if your project is impor-
tant. There might be learning opportunities or other reasons why people
76

Working with extremely limited resources 77
might find your project attractive. Consider any aspect of your project
that others might consider appealing.
It also helps if your project appears to be fun. Tom Sawyer managed
to whitewash his fence without actually doing any work because he
made it look enjoyable. People wanted to paint his fence because he
convinced them that there was nothing at all that they could do that
could possibly be as pleasant as painting his fence. Making your project
look like fun may be a challenge, but good project managers strive to
provide a congenial environment in which people can work. Humor
helps, as does maintaining good relationships with everybody on the
project.
When you find someone who is willing to help, secure that person’s
commitment and begin involving him or her in project planning and
other decision making. If you’ve promised anything in exchange for the
person’s commitment, ensure that you deliver on it.
Monitor progress throughout your project. Detect and quickly deal
with all performance issues. Be proactive, especially with people from
whom you do not have very strong commitments. When there is a prob-
lem, discuss it with the individuals involved. Remind people of the com-
mitments that they have made and seek their help in resolving issues. If
contributors seem to be falling behind in their work, approach them for
suggestions about how to catch up.
If you lose team members during your project, repeat your capacity
analysis and figure out what you need to do to restore staffing to ade-
quate levels.
Above all, diligently monitor your progress. If you start to fall
behind, make the situation visible to your sponsor, your stakeholders,
and anyone else who can help. At the first signs that your staffing is
inadequate, seek assistance and continue looking for help until you
find it.

Initiation Topic
32. How should I initiate a project that
has a relatively low priority?
Not every project can be the number one priority, so most project lead-
ers need to figure out how to get things done even though other work
may take precedence. To succeed, these projects will need sufficient
priority, sustained sponsorship, and a dedicated team.
Verifying Your Priority
Before assuming that your project has low priority, discuss the situation
with your sponsor. Review the project’s goals and work to understand
the expected benefits. If the project benefits appear substantial and
inadequate priority is a credible threat to these benefits, ensure that
your sponsor clearly understands this.
If your project priority is lower than appropriate, propose that it be
raised. Whether or not you are successful, determine which projects
have higher priority than yours and which have less. Consider tactics
for minimizing damage to your project from ‘‘more important’’ projects.
Gaining Suficient Sponsorship
No matter what your project’s relative priority is in your organization,
you can succeed if you are able to sustain support from your sponsor.
Verify that your priority is high among your sponsor’s responsibilities
and that your funding, staffing, and other needs are reliably committed
for your project’s expected duration. Discuss the expectations for your
project with your sponsor, and ensure that you both have a consistent
understanding of the consequences of failure. Repeat this discussion
with key stakeholders as well, and use these meetings to confirm their
support. Document your sponsor and stakeholder commitments. Be
prepared to draw on these commitments to avoid potential problems
and to aid in recovery from any that do occur.
If you discover that your project does not seem very important even
to your own sponsor, investigate why the project is being undertaken in
the first place. Perhaps what you learn will help you enlist sufficient
78

How should I initiate a project that has a relatively low priority? 79
support from others to get you going. If you are unable to generate much
interest from your sponsor or others in your organization, consider pro-
posing that your project be replaced by one with a better business case.
At a minimum, plan to set a baseline for the project that is not very
aggressive, and keep your eyes open for opportunities to raise its per-
ceived value and priority.
Establishing Team Cohesion
Teamwork is essential on all projects, but it is particularly important for
projects that are not especially high profile. Building a loyal team is a
good place to start, so work to establish trust and solid relationships
with and between all the members of your project team. Projects that
succeed do so primarily because the people working on them care about
what they are doing, so seek ways to enhance the connection, buy-in,
and commitment of all of your contributors to your project. Some possi-
bilities for this include potential learning and development opportuni-
ties, the vision for the project and value of the project deliverable to
each of your team members, a congenial work environment and likeable
people to work with, and possibly even the lowered stress of working
on a project that is not high profile and will not be constantly under a
management microscope. Whatever you can uncover to build a commit-
ted team will help you to get into and through your project, regardless
of its apparent priority.

Initiation Topic
33. How should I organize my project
management information system (PMIS)
to facilitate access and avoid ‘‘too much
data’’?
Projects depend on an excellent communications infrastructure, and the
information archive containing essential project information is an essen-
tial part of this. To ensure that people can find the information that they
need when they need it, set it up to mirror your project structure, keep
current data ‘‘on top,’’ and carefully manage trade-offs between access
and security.
Managing Your Structure
Many project leaders set up online information storage to reflect the
way that they think about the project, and this is not necessarily a bad
idea. If the project is small and most of the team members are thor-
oughly involved with nearly every aspect of the work, your perspective
on the project is probably similar to that of your contributors. However,
it may be naı̈ve to assume that everyone knows as much about what is
going on as you do if your project is larger and involves complications
such as technical complexity, subteams, or geographically separated
contributors.
One approach to simplifying access to project information is to set
up a hierarchy of layers and folders that mirror the way your project is
organized. You can use functions, roles, locations, or any other organiz-
ing principle that will help people quickly find what they are looking for.
In addition to establishing an intuitive structure for lower-level informa-
tion, you will also need to decide how best to store projectwide data,
such as high-level plans, scoping definitions, change and issue manage-
ment records, and status reporting. Establish obvious locations for
information that everyone will need to access, and ensure that it will be
very visible from the top of your information hierarchy. Many knowl-
edge management systems provide list and calendar functions useful
for this; you can use them to prominently display key information and
80

How should I organize my project management information system (PMIS)? 81
navigation links on the main access panel that people see when using
Web or other network access methods.
Test the effectiveness of your proposed project information hierar-
chy by thinking about the questions that your team will most likely need
to answer. Anticipate probable inquiries and ensure that your chosen
information structure will make finding the relevant data straightfor-
ward. Although this may make your information archive more difficult
to set up and maintain, it is ultimately a lot less onerous than constantly
having to answer questions yourself. It will also enable your team mem-
bers to self-serve rather than wait for you to respond when they need
information and you are not available.
Managing Data Currency
It’s great advice to keep all versions of everything in your archive. This
helps you to manage where you are going in light of where you have
been, and provides all the data you need to uncover lessons learned at
the end of your project. But while keeping everything is good practice,
a profusion of similarly named files can be confusing, and it’s potentially
dangerous to have stale information where people might inadvertently
act on it. To avoid this, consider how best to retain older data while
ensuring that what people find first and most easily is up-to-date.
If version control is available in the system you are using for infor-
mation archiving, take advantage of it. Set up your storage so that the
files and documents that people see in their primary views in the online
archive are current, and that extra steps will be required when access-
ing earlier versions. Some knowledge management applications make
this easy, with previous versions maintained automatically in a push-
down list whenever a new file with the same name is archived. If such
functionality is not available, set up ‘‘archive’’ folders at the same level
of your structure as the files containing your most current information,
and diligently move older versions out of the way and into the archive
folders whenever you add or update your files. Whatever you do, do not
force people to decode arcane date information buried in file names in
order to locate the newest versions of plans, status, requirements, scop-
ing definitions, metrics, reports, or other project documents.
Managing Security
To keep projects on track, especially global projects, ensure that key
data people need for their work on your project is available around the

82 How should I organize my project management information system (PMIS)?
clock. Your project data also must be easily accessed by everyone who
needs to see it, but this may not necessarily be your entire extended
project team. When you are setting up an information archive, consider
who needs to see what, and as you are planning your structural hierar-
chy, use whatever security tools you have available to ensure that your
team members can read everything they need to see but can only
update files, lists, and tables where they have a legitimate need. Also,
consider any requirements you may have for restricting access—for
example, in cases where you have external contractors who should not
be able to pull information restricted by your organization. Overall, bal-
ance the trade-off between access that is easy and open to all with your
requirements for guarding confidential information.
You also must prohibit inappropriate deletion of needed information
from your archive. It’s not uncommon for people to want to ‘‘clean up’’
the archive after they complete their work, or following project changes
that appear to make some of the files seem unnecessary. Some people
may also try to remove files containing information that they find per-
sonally embarrassing; it’s best to avoid storing information such as this
in the first place, but you cannot always know exactly how people might
react to every project status item. For these reasons, it is a good idea to
ensure that all team members can see and update (ideally with auto-
matic version archiving) everything they need, but also that most peo-
ple cannot erase any information. Reserve the authority to delete
information in the archive to only yourself and perhaps a very restricted
number of people on your core team. While file cleanup may sometimes
be necessary, uncontrolled deletion of project files is obviously danger-
ous. It may not always be obvious what information is truly no longer
needed, and once a file is deleted you may not be able to get it, or its
prior versions, back again. You cannot afford to run the risk of perma-
nently losing potentially critical project information.

Teamwork Topic
PART 3: TEAMWORK
34. How can I organize my team
for maximum creativity, flexibility,
and success?
Depends on:
g The experience of the team
g The size of the team
Considering Team Experience
For new teams, especially teams with a number of novice contributors,
the first steps to building a high-performing team involve transitioning
through the stages of ‘‘forming and storming’’ as quickly as possible.
Collaborating as a team in brainstorming, planning, and engaging in
team-building activities will help achieve the good relationships and
mutual trust required to get you into ‘‘norming,’’ where people begin to
see themselves as members of a team.
Provide mentoring and guidance for less-experienced team mem-
bers to assist them in quickly becoming productive contributors. Also
consider development needs for the team as a whole, and focus on any
training or skill building that will help you cover your responsibilities
and benefit your project.
Engage the more experienced members of your team in this men-
toring and training, emphasizing your appreciation for their expertise
and value to the team. Set up rewards for creativity and problem solv-
ing. When dealing with members of your team who have a long history
of project successes, focus discussions on what the project needs to
accomplish. Leave the details of how to do the work mostly up to
them; they probably know a good deal more about it than you do any-
way. Ownership and responsibility for key parts of the project are key
motivating factors. Encourage self-management, and trust people with
experience to do what they have committed to do—at least until you
have reason to believe otherwise. As Hewlett-Packard founder Bill
Hewlett was fond of saying, ‘‘People do what’s expected, not what’s
inspected.’’
83

84 How can I organize my team?
Considering Team Size
On small teams, and even to some extent on large ones, team-building
activities and rewards for creativity can be quite effective. When the
project team becomes so large that the techniques of program manage-
ment come into play, however, the primary responsibility for encourag-
ing innovation and maintaining relationships and trust will need to be
delegated to the leaders of each project team. Program-level structures
and incentives that facilitate how things work may help, but the key
success factors that are under your control are finding project leaders
who are personable and competent, and working to minimize interproj-
ect dependencies within your program. Your program will be able to
take best advantage of all the talents and creativity available only if each
project team is set up to work independently and can be largely self-
managed.

Teamwork Topic
35. How can I work effectively with
other project teams and leaders who
have very little project management
experience?
There are times where your success depends a great deal on the compe-
tency and cooperation of other project leaders. If your peers are suffi-
ciently experienced, things are likely to go well. If they aren’t, you will
probably need to help them get up to speed.
Leading by Example
If you see little evidence that the project leaders you must work with
are doing what they need to do, you may be able to get them on track
by providing good examples. If planning information you need about
their projects is missing or unclear, share your plans and provide tem-
plates and other job aids to get them started. If the processes that they
are using are not working well, offer to help them by mentoring and
provide good process descriptions to them. Make reference and training
materials available to help improve how they are working and to build
project management skills.
Criticizing other project leaders is never appreciated or effective,
but a related tactic that often works is asking a lot of questions. If a
dependency that you have on a related project is progressing poorly,
meet with the other project leader to discuss it. Focus on specific
detailed interactions and drill into the issues. Exploring project status
using fact-based questions can provide a face-saving way for others to
change. Once they realize what they ought to have been doing, they can
shift into it without having to admit that they had no idea what they
were doing. Focus questions on timing, resource, deliverable, or other
factual issues, and work suggestions into the questions for how things
might be improved.
Another idea that may be effective is to recognize where there is a
leadership vacuum and leap into it. If overall planning is not sufficiently
coherent, offering to lead a collaborative planning exercise can not only
85

86 How can I work effectively with others who have little experience?
be a good way to ensure that the planning will be done well, but also a
sneaky way to teach the others involved how it ought to be done.
Using Common Tools
Another way to encourage adoption of common, effective processes is
to promote the use of consistent project management tools. If everyone
is using the same tool for functions such as scheduling and managing
project information, you can exert a lot of influence by providing guid-
ance on structure, tool training and mentoring, and also by providing
specific examples of good project artifacts produced using the shared
applications. Libraries of templates and project documents can be very
influential in improving the quality of your peers’ project management
artifacts.
Using Your Inluence
Although it is often the case that people you work with are not employ-
ing adequate project management processes because they don’t know
how, sometimes this happens for other reasons. Some people are pro-
cess phobic and prefer not to think about what they need to do much in
advance. Others may just not have much aptitude for project manage-
ment. If you find that you must work with other project leaders who are
just not very interested in doing it well, you may be able to change their
minds by selling the benefits of good project management. For this, you
can use justifications similar to those listed in Problem 36. In other situa-
tions, you might be able to escalate to your sponsor or another higher-
level manager to enlist his or her help in encouraging better cooperation.
However, even in cases where you are successful in persuading (or
coercing) your peers into managing their projects better, they may be
grumpy about it and remain difficult to work with. Also, people with
little project management aptitude or who do not believe that project
management principles are useful will almost inevitably revert to their
old habits eventually. Whenever your progress depends upon dragging
recalcitrant project leaders into line with your current project, you
should also look for ways to avoid having to work with them again on
some future project.

Teamwork Topic
36. How can I help team members
recognize the value of using project
management processes?
In some organizations, project management may be considered to be
largely unnecessary overhead, replaced by Nike-style ‘‘Just do it’’
approaches. Even in these environments, selling people on good project
practices is possible, especially if you focus on things such as benefits
and pain avoidance, required or strongly recommended standards, and
meaningful involvement of the people you need to convince. This prob-
lem focuses on your team members, but as mentioned in Problem 35,
the ideas here can be equally effective in gaining the cooperation of your
sponsor and stakeholders.
Demonstrating Beneits
Project situations vary, but when contributors push back on the use of
project management processes, it’s usually based primarily on the fact
that the processes require work. That’s true, but the assumption that
not employing good project management practices will therefore be less
work is generally untrue. Past projects are almost always full of painful
memories, especially where there has been little planning and control.
Use this pain to your advantage, showing how a more orderly approach
would better deal with things that have been problems in the past, such
as the overtime required for rework, rushed work on activities discov-
ered late, the stress and panic caused by inadequate information, and
the enormous ‘‘late-project work bulge’’ needed to bring a disorganized
project to closure. Surface the issues that bother your staff and show
that the overall work using appropriate processes will be less, not more.
Also discuss other benefits, emphasizing aspects that do matter to
your individual staff members. Project management provides a basis for
better communication and control, so there will be better and clearer
guidance throughout the project. Fewer problems will mean shorter and
fewer meetings during the project, and everyone hates meetings, espe-
cially unnecessary meetings. Less chaos and thrash also means more
credible status and knowledge of progress, and therefore a lot less med-
87

88 Recognizing the value of using project management processes
dling by your management. Smoothly executed projects are left alone,
to focus on getting the work done instead of explaining, repeatedly, what
has gone wrong. Any reasons for better project management you can
devise that connect to benefits that are important to your contributors
will be persuasive.
Conforming to Standards
Project management is increasingly being included in standards, regula-
tions, and organizational requirements. Some types of projects have
governmental regulations that mandate certain processes, and others
must adopt them either for industry compliance reasons or to remain
competitive. If any of this is true for your project, point out to your team
members that in addition to project management practices being a good
idea there will also be significant consequences if you fail to adopt them.
Even if there are no external standards or regulations available to
help you enlist cooperation, there may be organizational requirements
you can cite. Project management or program management offices often
set up mandatory processes, and may also provide ‘‘process police’’
who monitor what is going on and can help you ensure appropriate
adoption. Although practices adopted to comply with prevailing rules
are easily implemented, they may or may not always be entirely appro-
priate. Exploit any help this provides, but also monitor your results and
consider alternatives if you find that obligatory processes are ineffec-
tive. Over time, use your post-project lessons learned, discussions with
your sponsor and other management, and work with your peers to
adjust your mandated processes so that they will be a good fit for your
environment.
Customizing the Process
It is always better to have people adopt practices that they have thought
of (or believe that they have thought of) than to demand that they do
so ‘‘because I said you have to.’’ Involve your team members in fine-
tuning how you plan to proceed, and listen to their feedback. If there
are major objections to processes you are recommending, ask those
who are complaining for their alternatives. If they come up with options
that appear better, consider them. If there are no better options voiced,
ask if your critics would at least try things your way for a while to see
how it goes.

Recognizing the value of using project management processes 89
Asking questions to guide the discussion can also be effective in
convincing people that your preferred processes are desirable. Help
people see for themselves how good project management practices can
address and resolve their problems.
Success stories can also be compelling. Identify similar projects that
have succeeded using practices you would like to adopt, and build the
case for emulating what they have done.
If you encounter so much resistance that you find it necessary to
begin the project without much cooperation, consider a stealth
approach. At a minimum, do a rudimentary plan yourself, and use it to
provide guidance to your team and track its work. In situations where
things begin to deteriorate, use the opportunity to revisit the processes
in use and do what you can to improve them as you proceed.

Teamwork Topic
37. How do I keep people focused
without hurting morale?
It is easy to keep up morale when things are going well. Projects being
projects, though, this is rarely the case for long. Sustaining motivation
depends on maintaining relationships, positive attitudes, recognition,
and awareness of why the project matters.
Maintaining Relationships
Sustaining good relationships and trust is a recurring theme throughout
this book. This is particularly important whenever a project goes
through a bumpy period. If there are problems and people need to
spend extra time to recover, stress and tempers tend to rise. An effective
project leader works very hard to keep people focused on the situation
and the work required for recovery. It does little good to ‘‘blamestorm’’
and waste time and energy identifying scapegoats. When everyone sees
others on the team as part of the solution, faster recovery and actual
progress will result, and cooperation will remain high. Although this
may seem easier said than done, minimizing strife and conflict is key to
surviving difficult projects.
Staying Positive
Henry Ford said, ‘‘Whether you think that you can or that you can’t, you
are usually right.’’ A good part of any successful project is holding on to
the belief that you will get through it. A team that believes it will fail, or
even admits to significant doubts, will find this to be self-fulfilling. Good
project leaders manage to stay cheerful throughout a project, and they
use their positive attitude to keep everyone else moving forward with
sufficient confidence. Taking it for granted that there is a solution for
every problem always increases the likelihood that you will actually find
one.
Keeping a positive attitude is not about ignoring problems and risks;
it is the exact opposite. Effective project leaders diligently monitor for
potential problems and early signs of trouble, and deal with them proac-
90

How do I keep people focused without hurting morale? 91
tively. Looking for problems allows you to find and solve them while
they are small. If you wait until they are so big that they are obvious to
all, they may be too enormous to resolve.
Recognizing Accomplishments
No matter what is going on with a project, there are always accomplish-
ments. It’s always appreciated when you identify them and make them
visible in your status reporting and other communications. Adding your
personal ‘‘thanks’’ to the contributor or team members involved will
help keep people engaged. In times of stress it may be hard to remember
to do this, but that’s when it will make the biggest difference.
Reminding People Why We’re Here
Ensuring that your team members all keep a firm grasp on project objec-
tives that matter to them personally will assist in maintaining focus,
especially when you are under pressure. The work itself, the experi-
ences gained, the skills acquired, the value of what the project will
deliver, or whatever it may be that those working on the project care
about will remain important to them. Reminding your staff why they
did—and still do—care about the project will help keep things moving.

Teamwork Topic
38. How can I involve my team in
project management activities without
increasing overhead?
Part of the answer to this question is that some people on the project
may not need to be as involved with every part of project management
as others may need to be. Some project contributors are part of your
‘‘core team’’ and need heavy involvement. Others are more peripheral
and can be less involved; if you insist on holding all team members cap-
tive while fleshing out every detail of definition and planning, you will
increase your overhead unnecessarily (and also mightily aggravate
some of your team members). However, all should be involved suffi-
ciently, and there are ways to make things easier and more efficient.
Simplifying Your Process
Project planning requires meetings, so as you are setting them up, deter-
mine your specific objectives for each proposed session in some detail.
Know why you are investing in each activity, and be brutal in eliminating
meetings and process steps that you don’t really need. For each meeting
that proves necessary, determine who should participate. For some
work, such as a project start-up workshop, all will be needed. For others,
a subset will be sufficient. Your team members who do not participate
can provide their input and feedback afterward.
Craft an agenda for each meeting including specific outcomes and
timings. Make your meetings as short as practical, and consider ways to
make them more productive by improving the processes, encouraging
prework, and when it appears that it could be useful, enlisting help from
someone outside the project to assist in facilitation.
If you are planning meetings for subteams, don’t assume that you
always need to attend. There may be aspects of project planning and
scoping analysis where your presence may not be needed, and might
even slow things down.
92

How can I involve my team in project management activities? 93
Increasing Eficiency
One way to get more done with fewer meetings is to replace routine
meetings on your project calendar with specialized meetings. The time
is probably already scheduled, and if it can be used more effectively for
an alternative dedicated purpose, take advantage of it. If the routine
meeting has a few essential agenda items, retain only those and deal
with them quickly so you can focus on higher-priority matters.
You may also be able to merge sessions that are focused on learning
and development with project planning. If some (or all) of your team
requires training in project management, integrating planning activities
for the current project into the training as skill-building exercises may
save a great deal of time and provide a setting for more effective plan-
ning.
Managing Reviews and Communication
As noted, it may not be essential to get everyone directly involved in
creating every project artifact. For some documents, you may be able to
do the initial work yourself. For others, you may be able to get things
started with just a small team of contributors. If there are project staff
members who are not involved with the creation of the documents,
though, ensure that they are able to review and critique them. A ‘‘RACI’’
matrix is an effective technique for keeping track of who needs to partic-
ipate in each step of the processes. The matrix assigns one of the roles
to each member of your team (including stakeholders where appro-
priate):
g Responsible (participates in development)
g Accountable (owns the development—one and only one person)
g Consulted (reviews and provides feedback)
g Informed (is provided information but feedback is optional)
For major project management deliverables, you are likely to be the ‘‘A,’’
with the rest of your team split between the ‘‘R’’ and ‘‘C’’ roles. ‘‘I’’ is a
bit too uninvolved for most project management activities, so use this
designation with care. Do follow up with anyone on your team who has
a ‘‘C’’ role to ensure that each has read and understands the information
distributed.

94 How can I involve my team in project management activities?
Maintaining Eficiency
Overhead matters throughout your project, too, so consider ways to
lower overhead as your project progresses. Use online repositories and
attachments to circulate information, and devote meeting time to ensur-
ing that people have reviewed the materials and answering questions.
Collect information using pre-populated forms, documents, or spread-
sheets to save people from having to write time-consuming and compli-
cated status summaries. Develop check forms or online surveys for
collecting simple information to speed things up. Cancel unneeded
meetings, and end all meetings on time or early.

Teamwork Topic
39. How can I manage and build
teamwork on a project team that
includes geographically remote
contributors?
Increasingly today, your project team is likely to be scattered far and
wide. Establishing the trust and camaraderie that a high-performing
team depends upon is most difficult when people are not located
together, but there are things you can do to help through team building,
maintaining good relationships, and avoiding favoritism.
Nothing works better for team building than coming face-to-face, so if at
all possible find a way to bring people physically together, at least
briefly near the beginning of each project. The most common justifica-
tion used to do this is a project start-up or launch meeting, as discussed
in Problem 25. There may be other opportunities to gather your team in
one place, too, so watch for them. If you are unable to gather everyone,
at a minimum bring subsets of the people who will work on your project
together, and travel to join them. If all else fails, find a way to meet one-
on-one with every contributor assigned to your project (or at least as
many as you can).
Strive to establish linkages between your team members, building
on common interests, educational backgrounds, common acquain-
tances—anything that helps the folks you are working with see each
other as colleagues and friends. Share pictures of each other, ideally
taken in recreational or other informal settings that will show that this
is not just about the job at hand. In this digital age exchanging photo-
graphs is easy, and posting them on project Web sites or prominently
within your project management information system will reinforce that
everyone is human and that you are all in this together.
It is especially important to motivate geographically distant contrib-
utors and to connect them to your project. Work to discover something
about the project that matters to your remote team members, such as
95

96 Teamwork with geographically remote contributors
the type of work they prefer, aspects of the project that are personally
important, or anything else that can increase their motivation and buy-
in. Above all, reinforce things that you all have in common, and strive to
break down barriers and minimize any differences.
Maintaining Relationships
Establishing good teamwork is hard, and sustaining it can be even
harder. As projects proceed, problems arise, stress builds, and conflicts
are nearly inevitable. Your job as a project leader is to ensure that the
first response to a bump in the road will be an effort to resolve and
move past it, not the initiation of protracted battles over who caused it
or e-mail flame wars that will leave everyone fuming.
Maintaining good teamwork and effective communications among
distant team members is discussed in more detail in Problem 71. Focus
at least as much attention on communicating with remote contributors
as you do with those nearby, and work to keep the peace inside your
team, dealing with potential conflicts and differences quickly and proac-
tively.
Avoiding Favoritism
Unless all of your team is distributed, another challenge you will face is
the potential for real (or perceived) preferential treatment for people
who are nearby. You may never be able to completely remove all appear-
ances of favoritism, because there are likely to be a lot more chances to
interact and communicate—both formally and informally—with people
with whom you are co-located. Nevertheless, you can mitigate this by
communicating diligently and regularly with distant contributors, ensur-
ing that all rewards and recognition are fair and available to all, and
that responsibilities are delegated evenly. It is also good practice to ask
questions to draw people out and encourage participation by everyone
in teleconferences, especially for those who are not physically present
and do not participate as much as those who are in the same room.

Teamwork Topic
40. How do I secure team buy-in on
global projects?
Support across a global team will inevitably be somewhat uneven,
because the more diverse a group is, the more perspectives tend to
differ. Getting buy-in depends a good deal on your investment in build-
ing teamwork, as covered in Problem 39. It also depends on the project
itself, sponsorship, and ‘‘what’s in it for me?’’
Promoting Your Project
You may need to do some selling to gain support for your project from
your stakeholders and contributors. Consider the overall business justi-
fication, and test whether there are any aspects of it that the people
whom you need to have on your side particularly care about. Also
develop a vision associated with the expected results of your project,
and evaluate how each person you interact with could personally bene-
fit from its successful completion. With a global project, some of this
may require investigation and discussion, both with your key stakehold-
ers and possibly with others who can help you to better understand
where people are coming from. If you are successful in connecting the
interests of the people you need to influence to the overall objectives of
your project, you should be able to enlist their support.
If there are people who initially do not support your project, you
may be able to change their minds using some of the tactics for dealing
with adversaries explored in Problem 24. If, despite your best efforts,
some of your stakeholders remain hostile to your project, you will need
to do your best to minimize the potential damage that this could cause.
Leveraging Sponsorship
Global projects are often sponsored by upper-level managers in the
organization who have a good deal of clout. If you detect a lack of sup-
port from any of the stakeholders you are depending upon, approach
your sponsor and discuss the situation. Your sponsor may be willing
and able to participate in project meetings. Having your sponsor’s posi-
97

98 How do I secure team buy-in on global projects?
tion power on your side may succeed in securing the buy-in you need.
Sometimes simply reminding others of who your sponsor is will be suf-
ficient to transform people from ambivalent to supportive; an influential
sponsor’s interest in your project can be very persuasive.
Upper-level managers are more likely to travel than others in the
organization, so be alert for travel plans that involve sites where you
seek better support. Having your sponsor drop by, even briefly, to men-
tion the importance of your project to a reluctant stakeholder can be
extremely effective in increasing his or her support.
Reciprocating with Others
Even if it is a highly visible, enterprisewide effort, your project will never
be the only thing competing for people’s attention. To gain the support
you need, you will almost always need to provide some reasons for oth-
ers to cooperate. ‘‘Giving and getting’’ are the basis for most human
interactions, and modern projects are no exception. Consider what you
might have to offer in exchange for the support that you seek. Some-
times it might be the attention and recognition associated with your
project. Other times it could be a favor you have done in the past or
propose to do in the future. There are many possibilities for exchange,
and you are likely to find one or more plausible options for each of your
stakeholders from whom you need to obtain buy-in. Be creative and
flexible in developing ideas, and be sure to follow up and deliver on
anything that you have promised in exchange for each person’s support.

Teamwork Topic
41. How can I best manage project
contributors who are contract staff?
Team members who work for your organization may have many good
reasons to care about your project. Contract staff, on the other hand,
have less ‘‘skin in the game,’’ and may not care much at all; they are
generally not involved for the long term, and may have little in common
with the rest of your team. They may not have much interest in the work
because their primary connection to the project is monetary. Good proj-
ect leaders work to ensure that all contributors have reasons to care
about the project, including those who work for other organizations.
Building relationships with contract employees may present some spe-
cial challenges, but they need not be insurmountable. Improving team-
work starts with developing trust and a friendly working relationship.
Begin, as with any contributor, with conversation to get to know one
another. Seek things that you have in common, such as interests, educa-
tion, past project work, or really anything. Ask outside contributors
about recent accomplishments and what they are particularly pleased
about or proud of. Discuss aspects of your project that are similar to
what they have enjoyed in the past, and seek ways to get them involved
in work on your project that they are likely to want to participate in. Ask
other questions to discover what motivates them and consider how
these factors could benefit your current project.
Making It About More Than Money
Involve your outsourced staff with your other team members in meet-
ings, planning, and other project activities. Except where your organiza-
tional policies prohibit it, also include them in team building and other
events as well. If there are rules requiring that outsiders be excluded
from planned events, consider modifying what you have set up so you
can include everyone. (If there is no way to involve everyone, you might
even be better off cancelling such events.) The more you are able to
99

100 How can I best manage project contributors who are contract staff?
encourage team interaction, the more likely it will be that you will have
a high-performing team.
‘‘Giving and getting’’ apply to outside contributors, too, so consider
what you or your project has to offer that your contract team members
would find valuable. One of the most obvious possibilities is the pros-
pect of a continued relationship following the project, through either an
extension of the contract work into future projects, or even the possibil-
ity of permanent employment with your organization. Your project
could also represent a valuable business reference, which (assuming it
goes well) could be instrumental in obtaining future contract work. Your
project may also represent learning opportunities, or a chance to work
on something new or especially interesting, or it could have other
aspects that could be motivating.
Rewards and recognition are also important. The mechanisms may
be different from those available to people within your organization, but
there are generally at least some options. No matter what, you can at
least express your personal appreciation and thanks for a job well done,
and mention significant accomplishments in your status reports and
other communications. You can document and send complimentary
information to those who directly manage your outside contributors,
and you may also find opportunities to recommend them for specific
rewards available within their own organizations. Anything that suc-
cessfully pulls your outside contributors closer to you and your project
can work to your advantage.
Managing Contract Staff
Finally, you should read and thoroughly understand the terms and condi-
tions of all relevant contracts. Do your best to meet all the requirements
that are yours, and ensure that all invoices are reviewed promptly and
paid as appropriate. If there are provisions for incentives and penalties in
the contract, work to realize the benefits associated with the incentives,
and make sure they are paid. Keep situations that might result in penalties
visible, and strive to avoid them. Contract penalty terms may be neces-
sary in the contract, but whatever they are they can never fully compen-
sate for the damage to your project from the event that triggers them.
Be an effective liaison with the other party, and provide frequent
feedback on the progress of your work. Detect and deal with all issues
quickly, and work within the terms of the contract to ensure that your
project receives everything the contract guarantees.

Teamwork Topic
42. How do I cope with part-time team
members with conflicting assignments?
In a perfect world, all projects would be staffed with dedicated, full-time
contributors who have no other responsibilities. In the real world, we all
have many demands on our time, and at least some of the contributors
on typical projects will also be committed to other projects. Succeeding
in this environment depends on realistic and meaningful commitments,
adequate involvement, and support from other managers.
Getting Commitments
Particularly with part-time contributors, relative priorities are a prime
consideration. Ask your team members who have significant other
demands on their time about priorities for your project and their other
work. Also inquire about their perception of both the importance and the
urgency of the other work relative to your project. If your overall impres-
sion is that you will have to struggle to get their attention when you need
it, you might consider investigating more reliable staffing alternatives.
Before that, however, explore any concerns that you have with the indi-
viduals’ managers to verify what you are hearing. If you remain concerned
about particular part-time contributors, discuss options with your spon-
sor for adjusting overall priorities in favor of your project, or potential
alternatives for proceeding that minimize your dependence on them.
Even if you do have reasonable confidence in your staffing, verify
exactly what ‘‘part time’’ means. If the commitment is for half time, how
many hours per week will that represent? Will it vary from week to
week? If the commitment is less than 20 percent, will it represent a
meaningful contribution? (Meetings and other communications could
use that much time, and leave little or none for other activities.) Get a
good sense of when and how much time your project can expect from
each person, and plan accordingly.
Involving Part-Time Contributors
As with any member of your team, involving part-timers begins with
building good relationships and trust. Ask about work preferences and
101

102 How do I cope with part-time team members with conflicting assignments?
expertise, and get them involved with activities that they are good at,
and, ideally, that they want to do. Involve them whenever possible in
your start-up workshops and planning activities, and ensure that each
person has an adequate opportunity at least to review and provide feed-
back on project documents. Ask people to provide initial estimates and
other analysis for their assigned project activities, and give them ample
opportunity to provide their inputs to the planning for any work they
will contribute to. Uncover aspects of the project or other things you
could reasonably offer that could increase their motivation and dedica-
tion to the project. Plan to take full advantage of any relevant rewards
and recognition available, including frequent use of unanticipated
‘‘thank-yous.’’ Random positive reinforcement is important for all team
members, but it’s particularly effective with people who are only loosely
connected to your project.
Securing Other Managers’ Support
As your planning nears completion, formally secure reliable commit-
ments from both the individuals involved in your project and their man-
agers. Communicate frequently with the managers of all of your part-
time contributors, providing them with both overall project status and
feedback on the work done by their people. Strive to keep things posi-
tive, and pass along as much good news as you can; when contributors
realize you are on their side, they are usually more than willing to do
anything reasonable you request. If you do encounter performance
problems with any of your part-timers, first approach the individuals to
discuss the situation and work with them to resolve the issues one-on-
one, using some of the ideas in Problem 43. If you are unable to resolve
matters quickly, let them know that you plan to escalate to their manag-
ers. If the problems persist, don’t hesitate to escalate.
Getting and keeping meaningful part-time commitments may also
involve a bit of wheeling and dealing with these managers. Explore what
about your project potentially matters to the managers of your part-
time staff, or if there might be something else that you can offer to them.
Use what you learn to secure reliable resource commitments to your
project.

Teamwork Topic
43. How do I handle undependable
contributors who impede project
progress?
Even on relatively trouble-free projects, some tasks will be late. When
the cause of the delay is (or appears to be) one of your team members,
you need to confront the situation promptly and work to get the project
back on track.
Verifying the Commitment and Status
When assessing project status, identify any timing problems by compar-
ing the collected data with your baseline project plan. If you find that
something has slipped, especially if the delay is likely to result in sig-
nificant project problems, investigate and find out why. If the apparent
cause is a failure of one of your contributors to complete an assigned
task on time, meet one-on-one to discuss the situation. Start your discus-
sion by outlining the consequences of the slippage to the overall project
and any other impact it will have, emphasizing any issues that are par-
ticularly important to your individual team member.
In your discussion, verify that the initial timing commitment was
clear. If it was not, determine how to ensure that any remaining due
dates are well understood. If the timing commitment was clear but
missed anyway, probe to find out why.
Resolving the Problem
Whether the missed deadline was clear originally or not, you’ll need
to work together on recovery. In determining how to proceed, work to
understand the reasons for the delay. If ownership was unclear, upgrade
your communications to improve on them. If your contributor lacks the
knowledge, skill, or aptitude to complete the work, consider training
opportunities or enlisting help from others. If there is more work to do
than can reasonably be accomplished, revisit your plans either to
103

104 How do I handle undependable contributors?
spread the effort more realistically or to consider project changes. If
higher-priority work is getting in the way, consider escalation.
Based on the root cause (or causes), consider together what the
most effective approach will be for getting the project back on track. It’s
best to begin this dialog by asking your contributor for recovery ideas
before supplying your own. If after considering your contributor’s ideas
you have additional thoughts, offer your own suggestions. Whenever
practical, though, favor the course of action your staff member recom-
mends; you can have more confidence in successful resolution if the
recovery plans don’t appear to be ‘‘marching orders’’ from you.
Getting Back on Track
Select a path forward that makes sense to both of you. Ask for agree-
ment, and get your contributor’s renewed commitment to follow
through. Express your thanks and show that you are confident this will
be successful.
In your next status cycle, verify that the project is back on track, or
at least recovering as planned. If it is, remember to thank the individual
and recognize the effort this required.
If the problem persists, though, confront the individual again. If
working together appears ineffective, cast a wider net within your proj-
ect team for recovery ideas. If all else fails, escalate to your sponsor and
begin exploring other alternatives such as finding and engaging replace-
ment staff.

Teamwork Topic
44. How should I manage informal
communications and ‘‘management by
wandering around’’ on a virtual,
geographically distributed team?
Informal communications with distant contributors can be a challenge,
and it is more complicated than with nearby team members who are
close enough to wander over and speak with. It requires planning and
discipline to do well but yields substantial benefits.
Combining Formal and Informal Interactions
Your routine formal communications with remote contributors—team
meetings, one-on-one telephone calls, and other periodic interactions—
offer a number of openings for effective informal communications. Use
small amounts of time at the start or end of team meetings to invite
people to share a little about what they are up to, to reinforce that we
all have a life outside of the project. A short digression about a recent
sporting event involving one of the locations where you have contribu-
tors, a new film, unusual weather affecting some of your team, or some
other topic of interest can be an effective use of a few minutes, espe-
cially if everyone is not yet present or dialed in. Keeping to a disciplined
agenda is necessary for efficiency, but minor excursions into more per-
sonal matters need not interfere with this.
Planned one-on-one meetings at least once a week with distant staff
members can also be good opportunities for side conversations on non-
project issues of mutual interest. Again, start or end your planned con-
versations by asking how your remote contributors are doing or feeling,
and if they have previously shared news of an outside activity they are
involved in, express interest by asking about it.
Other Interactions
Travel when you can to visit distant contributors, and do what you can
to enable your team members to travel to you on a regular basis. Coming
105

106 How should I manage informal communications?
face-to-face at least twice a year is very helpful in maintaining good
relationships, and ensures that the use of telecommunications and
other distance-spanning technologies remains as effective as possible
between visits.
When you schedule reviews, celebrations, or other special meet-
ings, plan to involve your remote team members, or set up parallel
events that they can participate in so no one is excluded or marginal-
ized.
Practicing ‘‘Tele-MBWA’’
Informal communication is mostly about unplanned interactions, and
one tactic for this on geographically distributed teams is to practice
‘‘tele-MBWA.’’ Management by wandering around, or MBWA, is a tech-
nique popularized by Bill Hewlett and Dave Packard in the days shortly
after they founded the Hewlett-Packard Company. MBWA is based on
unscheduled conversations that are not centered on business matters.
Particularly when HP was small, both founders strove to forge personal
relationships with everyone in the fledgling company. As the company
grew, this philosophy remained important; both founders were always
known as ‘‘Bill and Dave,’’ even well after their retirements. All managers
at HP were encouraged to practice MBWA, especially those for whom it
did not come very naturally. Using communications tools to practice
MBWA with those who are not nearby is a variant on this tried-and-true
method for building trust and relationships.
The key to MBWA, whether with team members who are close by or
far away, is to do it fairly frequently, at least several times a month. It’s
also important that MBWA be spontaneous and without any agenda. If
necessary, schedule the time required to be spontaneous—add time to
your calendar at random intervals to protect the time for yourself and
to serve as a reminder, and consult the schedules of others to ensure
that they are likely to be available and open to a conversation. Pick
times that are convenient to your remote team members, even if they
are not convenient to you. Be considerate of the other people’s time by
doing it near the start or end of their day or near a mealtime or other
break to avoid fragmenting their productive work time. Be a good lis-
tener, and never restrict or try to steer these conversations. Let the
other person do most of the talking. Ask open-ended questions, such as,
‘‘Are you happy here? Do you like your job? What would make it more
meaningful and productive? How is your family? How was your vaca-
tion?’’ Whatever you hear, don’t argue. The main point is to get to know

How should I manage informal communications? 107
the people you are working with and to demonstrate that you care about
them as individuals, not as some sort of interchangeable automatons
assigned to your project. You are establishing an open environment of
trust and working to really get to know your project staff.
Make these frequent spontaneous phone calls, even if you’re not
terribly comfortable doing this at first; it becomes easier with time and
practice. Do this often enough to stay in touch, but back off your fre-
quency if it appears that people find the conversations intrusive or
annoying. Include all of the team in your MBWA, both those at your
location and all who are at a distance, and try to do it evenhandedly,
not just focusing on your team members who are nearby, are easy to
talk with, or share your interests. This kind of informal communication
is not a waste of your time because in times of stress and difficulty—and
all projects have them—prompt and effective recovery depends on the
relationships and teamwork you have established. Personal involve-
ment is always essential to good project management.

Teamwork Topic
45. When should I delegate down?
Delegate up?
Project management, unless you plan to do all the work entirely by
yourself, involves a good deal of delegating. We delegate to ensure own-
ership and coverage for all the work necessary, and also to gain confi-
dence that the applied resources will be adequate to complete the
project. Delegate project work to your team to align your tasks with the
people who are in the best (or at least an adequate) position to get it
done. Delegating work upward can be a bit tricky, but you’ll need to do
it whenever you lack authority to proceed or you need coverage for
responsibilities that cannot be provided within your team.
Delegating Down
Delegation is a basic foundation of project planning. The work break-
down process decomposes a whole project into smaller pieces, both for
better understanding and to ensure that each part can be assigned to
a single person who will accept ownership and be responsible for its
completion. In delegating project activities to your team members, you
are assigning ownership of a portion of the overall project to each con-
tributor. Ownership, when accepted voluntarily, enhances buy-in to the
project objective, builds teamwork, and increases motivation.
Delegate responsibility for all tasks in your project downward to
your team members. Align the work with contributors who are compe-
tent and willing to accept the responsibility, involving them in the defi-
nition, estimation, analysis, tracking, and all other aspects of the specific
tasks. Effective project leaders delegate nearly all the defined project
activities. Project management is a full-time job, so it is risky to retain
ownership of too many scheduled project activities yourself. Seek
named owners other than yourself for all project tasks, even if you sus-
pect that you will ultimately have to assist in bringing some of them to
closure.
Successful projects require more work than just the planned activi-
ties. There are also a wide range of responsibilities related to project
management processes to account for, most of which are probably
yours. Normally, you will do most of the communications and reporting
108

When should I delegate down? Delegate up? 109
for your project, lead most of the meetings, and do other things that
serve as the ‘‘glue’’ to hold your project together. That said, there can
be situations where you may want to delegate some of this to others.
If you have a distributed team, it could make sense to delegate some
organizational tasks. If there are technical complexities beyond your
understanding, you may need to delegate parts of the project definition
and documentation to appropriate subject matter experts. For very
large projects that are managed as programs, you will undoubtedly find
it necessary to delegate management activities to the individual leaders
of the component projects, as well as to any program staff members that
you have on staff. In general, though, you should always delegate the
‘‘nuts and bolts’’ of project management somewhat reluctantly. It’s your
project, and the more you delegate fundamental project management
responsibilities to others, the less control you will have.
Delegating Up (or to Peers)
The most obvious cases where project leaders delegate upward involve
situations where they lack sufficient authority to proceed. Decisions
involving significant amounts of money, life-cycle review approvals, or
other aspects of project work beyond your control are often ‘‘kicked
upstairs.’’ Escalations of problems you are unable to resolve at your
level of the organization are other frequent examples. To delegate
upward as smoothly as possible in these situations, create a presenta-
tion or prepare a document that clearly summarizes the facts at hand,
sets a clear deadline for resolution, and provides your thoughts or rec-
ommendations on the matter. When you do have to delegate work
upward, strive to appear as competent and professional as possible, and
do it only when it is really necessary.
With time-sensitive decisions and approvals, emphasize why a
prompt response is needed and clearly explain any consequences of
delay. Consider advising your sponsor or manager that the pending
response is essential to your project and that you plan to include its
status in your next status report assigned to that person by name.
Threatening your management with a potential ‘‘red stoplight’’ indicator
can be very effective in generating a timely response. The downside is
that if it is late, you’ll need to follow through, which may not be appreci-
ated. (And if you don’t follow through, the next time a similar situation
arises you’ll be ignored.)
When you are asked (or told) to do something significant that
diverts your time and attention away from your project, you will need

110 When should I delegate down? Delegate up?
to delegate some of your responsibilities. You will also, sooner or later,
take some time off from work—even project leaders get to take at least
a little vacation. Many of your responsibilities can probably be handled
adequately by someone on your project team, so plan to cover as much
as possible that way. (This is a good way to further involve your contrib-
utors and increase their buy-in, and it’s also useful in finding out if some
of them might make effective project leaders.) There are usually a few
things, though, that you cannot delegate downward.
One option is to enlist the help of a peer, generally by committing
to cover similarly in the future for him or her in exchange. Another
option is to get your manager or sponsor to cover for you. This can be
a good alternative in cases where your management is responsible for
the situation taking you away from your project in the first place. If you
are asked to travel for business reasons unrelated to your project (such
as for a meeting with a potential client or to a customer hot site), pre-
pare a list of things that require attention in your absence and assign
them to the manager who is sending you on the trip. (If your list appears
sufficiently burdensome, perhaps the travel request will be passed
along to someone else.)
Even when you successfully delegate work to those above you in
the organization, it’s ultimately still your project. When requesting help,
provide as much guidance as necessary to ensure that things will con-
tinue smoothly in your absence before you disappear, and be prepared
for at least a little cleanup when you are able to reengage.

Teamwork Topic
46. How can I best deal with project
teams larger than twenty?
Very large projects are most successfully treated as programs, a collec-
tion of related but largely autonomous projects responsible for bits and
pieces of the overall objective. Even more than on smaller projects, a
program will benefit organizationally from a start-up or launch meeting,
as described in Problem 25. Establishing a program team infrastructure
is also essential, as discussed in Problem 26. This problem focuses on
the structural hierarchy, communications, and team interactions useful
in running a complex program.
Establishing a Program Hierarchy
Program management uses a hierarchy of interrelated projects to mini-
mize and control the complexity, assigning the required large number of
contributors to one project or another as necessary. The ‘‘core program
team’’ is made up of the program manager, the leaders of the various
projects, and any members of a program staff directly reporting to the
program manager. In one program that I worked on at Hewlett-Packard,
there were about 200 contributors at any given time, working on more
than a dozen separate subprojects. In addition, we had a small program
staff of about a half-dozen people who reported to the program manager
(who was an IT director), which included me. My role was program plan-
ner, and I was responsible for the overall program plans, for the detailed
plans supporting each of our quarterly releases, and for coordinating
the contents and status of all of the detail-level project plans. Most of
the contributors did not report directly to the program manager, but we
were able to establish a strong matrix for the program early on that
treated the managers who were responsible for all the necessary func-
tions and individuals as de facto members of the program staff.
Throughout the program, this core program team varied in size but
was generally approximately fourteen people. All of the members of this
team appeared on program organization charts, were tightly involved in
all planning and tracking, and attended weekly program staff meetings.
No distinction was made on the program team based on management
reporting relationships, and we put a lot of effort into ensuring that the
111

112 How can I best deal with project teams larger than twenty?
primary loyalty for each team member was to the program, rather than
elsewhere.
As with this program, the appropriate control structure that
emerges for your program will mirror the decomposition of your work
into projects, along with any necessary program staff needed to ensure
that all responsibilities are well covered.
Communicating in Layers
Communication is important on any project; on large, complex pro-
grams either you communicate well or you deal with constant chaos
and disaster. Layered communication is one effective way to provide
people with information they need without overwhelming them with too
many data.
Both for those inside the program and for external stakeholders,
you should maintain a program Web site or similar place for storage of
general high-level information on the program, with pointers to more
detailed and more specialized information stored elsewhere online.
For those working on the program, ‘‘all hands’’ conference calls
roughly once a month can serve as a ‘‘virtual’’ program team meeting.
The main part of these mass meetings will generally be presentations
created in advance by the program manager and staff members (typi-
cally two or three people each month). This part of the meeting would
be roughly forty minutes of a one-hour scheduled conference call, and
the supporting presentation materials are posted online and distributed
in advance to all program contributors. The remaining time on the
agenda should be reserved for questions and general interactions. For
global programs, keep everybody synchronized by holding the meetings
more than once. The HP program I helped manage scheduled two con-
ference calls monthly, ten hours apart on the same day, to accommo-
date participants worldwide.
More frequent and detailed meetings and e-mails are used to focus
on specific portions of the program. For this HP program, the weekly
program staff meetings, weekly release meetings, and other weekly proj-
ect status meetings all covered details relevant to the participants.
Meeting summaries were sent to distribution lists set up for each to
ensure that all involved had the current information needed for their
work. The published reports and meeting minutes served as the defini-
tive source for up-to-date program information.

How can I best deal with project teams larger than twenty? 113
Archiving Information
In addition to distributing weekly status and other current information
to the program contributors on our large IT program, we posted all the
detailed information for reference to our knowledge management sys-
tem. Our online knowledge management system provided all program
team members with around-the-clock access to the current status as
well as all earlier versions. The archive we set up was very effective, and
generally in line with the advice in Problem 33. Specific content areas
we established included:
g The Program Plan of Record. The plan of record (POR) was a
high-level document that was maintained in a partitioned workspace
where all could read it, but only a small number of people on the
program staff could update it.
g Overall Program Information. We maintained general program-
level information in a number of folders set up for program plans, inter-
connections between the separately managed projects, information
specific to each release, program staff information, and other matters of
interest across the program.
g Program Function Details. In addition to general program
folders, we also had sections for each functional area and geographic
region, where team-specific information could be centrally maintained
and made available to all.
g Change Requests and Status. All change requests were centrally
stored and used to track the many hundreds submitted over the course
of the program, and used for scoping future program releases.
g Process Documentation. We also centrally maintained all key
program process descriptions in the knowledge management system.
g Program Lessons Learned. At the end of every release (some-
times more frequently when things were particularly bumpy), we
conducted a retrospective analysis. We identified the top three areas of
improvement and took action on them each cycle. We also archived all
our retrospective survey information for later reference.
In setting up a program management information system, organize it
from the perspective of the program team members. Make it as easy as
possible for contributors to find the information they need.

Planning Topic
PART 4: PLANNING
47. What can I do to manage my
schedule when my project WBS
becomes huge?
Depends on:
g Project novelty
g Experience of your team
Breaking Up Big Projects
‘‘Huge’’ is a relative term. When project activities follow general guide-
lines of being roughly eighty hours of effort or two to twenty workdays
in duration, it’s generally agreed that project management principles
can easily deal with up to about 200 of them. For projects that are blaz-
ing trails into unknown territory, or working with very large teams to
aggressively compress a project timeline, the total number of activities
is substantially less; the tasks of coordination and communication can
overwhelm the project leader at 100 total activities or even fewer. If the
project is routine the number can safely go above 200, but if you stretch
the limit beyond approximately 300 separate activities, things will start
falling through the cracks and you will lose control.
Dealing effectively with projects that exceed these limits is the prov-
ince of program management. Program management decomposes large
projects into a set of separate smaller projects, each of which can be
managed well using project management principles. Some programs are
made up of multiple projects running in parallel, each led by a desig-
nated project leader. Other programs are set up as a series of projects,
run sequentially or overlapping somewhat in time, but each having a
moderate duration no longer than approximately nine months. More
complex programs do both, setting up sequences of parallel projects
responsible for creating a progression of complex deliverables. Estab-
lishing programs is discussed in Problems 21, 26, and 46.
If the initial planning process generates hundreds of separate activi-
ties, the basic work breakdown process may be used along with affinity
analysis or some other approach for grouping similar work to create a
logical set of largely independent subprojects. If the project is larger
115

116 What can I do to manage my schedule when my project WBS becomes huge?
than this, or larger than you prefer, the first step might be to work from
subcomponents of the overall deliverable to initiate separate work
breakdown structures, for components in parallel or interim delivera-
bles in parallel (or both), where the scoping for each is sized to enable
thorough planning and ongoing control. Whatever the approach, the
ultimate goals are to set up manageable projects that include all the
work needed.
Finding Project Leaders
Decomposition into projects that can be handled well is part of the bat-
tle. Each project also must be delegated to a project leader who will take
responsibility for the work, and assigned to a team capable of doing the
work. Some programs assume that the management part is easy and can
be done by the program manager, so the team leaders can be mostly
technical and need not be bothered much with ‘‘project management
stuff.’’ For small programs that have only a few teams this might work,
but even here it is risky to delegate the projects to individuals lacking
the skills and aptitudes that good project management requires. Calling
subject matter experts project managers does not necessarily make
them good project leaders; there is more to it than that, especially in
the context of a large, complex program. Select the leaders of the proj-
ects making up the program carefully, seeking adequate experience and
competence. The composition of each project team also matters, so
work with the project leaders to determine the needed skills and staffing
for each project.
Treat the initial program breakdown as a draft, and work with the
project leaders and their contributors through several iterations of plan-
ning to ensure that the work is well defined, balanced across the proj-
ects, and adequately staffed.
Managing Project Connections
Large, complex projects solve one problem through decomposition and
delegation, but they create another one. The resulting projects are gen-
erally treated as independent, and if you structure the program well
they largely will be. They are never actually independent, however, and
all the interdependencies must be identified and managed. These con-
nections or interfaces are primarily the responsibility of the program
manager, and managing them is discussed in Problems 55 and 56.

What can I do to manage my schedule when my project WBS becomes huge? 117
These interfaces and all other pertinent program data should be
gathered and stored centrally, where all who need them can find and
use them. A discussion of this is included in Problem 46. Ensure that all
contributors can drill down to information related to their work with
little difficulty. The more that people can operate independently, the
less likely it will be that program progress will be held up while waiting
for you or someone else to dig out the answer to a question.
A central principle of successful program management is focusing
primarily on the details that involve the program as a whole. No single
person can keep up with thousands of activities and the efforts of hun-
dreds of contributors, but you can track dozens of project interfaces;
the general progress of a core team of capable project leaders; and the
major risks, issues, and other matters that affect the overall program.
Surviving a large program relies on aggregating and delegating most of
the detail to others, where it can and will be managed competently.

Planning Topic
48. How can I get meaningful
commitment from team members that
ensures follow-through?
Project management depends on successful delegation, as discussed in
several earlier problems. This rests on clear assignment of ownership,
offering of something in return, and diligent tracking.
Assigning Ownership
Motivation in the workplace has been studied for decades, and one find-
ing that has been repeatedly verified, not surprisingly, is that people are
most enthusiastic about work that they enjoy and that they are respon-
sible for. Project leaders often complain that their team members
mostly (or all) work for others, so they are not able to really control
anything. Although you may not be able to manipulate salaries, assign
workspaces, or directly do other management functions, these factors
are not as important to motivation as many assume. The work itself,
responsibility, achievement, and recognition are all generally more
important, and as project leaders we can control or strongly influence
all of them. Securing a commitment relies on knowing enough about
your contributors to make assignments that exploit their preferences
for work and achievement, which is one of the key reasons for establish-
ing good relationships.
As you proceed with planning and creating a work breakdown struc-
ture for your project, observe which of your team members are most
interested in each part of the project. When it comes time to assign
owners, ask for volunteers and as much as possible align the assign-
ments with the interests of your project staff.
Some work on the project will be very desirable and other work
probably far less so. Never assume that work you find uninteresting will
be equally unappealing to others, though. There may be someone on
your team who loves writing documentation or other work that others
would flee the room to avoid, so always ask and let people sort them-
selves into assignments that they desire insofar as you are able.
Involving the team in planning is a good way to get a sense of where
118

How can I get meaningful commitment from team members? 119
people’s interests lie, and as the work profile develops you can get a
good feel for which areas of the project are best understood by which
members of your team. Getting a reliable commitment for activities that
people want to do is often little more than asking and attaching a name.
Stafing ‘‘Orphan’’ Activities
All the work needs an owner, even the activities that no one seems to
want to do. As you are allocating owners to project activities, investigate
why no one seems interested in taking responsibility for some of them.
If the primary reason is that no one knows how to do it, you may find
someone who would gladly take it on if offered a chance to learn how. If
it is undesirable because it seems overwhelming, you might find willing
owners for pieces of it following further breakdown. If an activity seems
unpopular because no one believes it is necessary, investigate, and if
this is correct, drop it. If no one has enough time to take on the work,
perhaps additional staffing or adjustment of priorities is in order. There
are many other reasons for people to be reluctant to sign up for project
work, so you need to probe to find out why. If there is some way to deal
with it and locate a willing owner, do so.
Other necessary project work inevitably falls to the bottom of the
list because it is dull, is thankless, depends on working with difficult
people, or for whatever reason seems unappealing. Because it is needed,
someone will have to do it. Securing a reliable commitment in these
cases will require some negotiating skills and some ‘‘giving and getting.’’
One thing you can consider, as mentioned above, is the opportunity to
learn something new. You also might be able to bundle the work as a
‘‘package deal’’ with other project assignments that are attractive. If you
get creative, there is a wide spectrum of other things you can potentially
offer, such as personal favors, covering some of the project manage-
ment overhead for the person willing to accept responsibility, or any-
thing else you can mutually agree to.
If you are unable to secure an owner, even after your best efforts to
cajole, investigate whether there might be a different, more desirable
way to get a similar result. In some cases, outsourcing the work on a
contract basis might also be an option. Consult other project leaders
who have taken on similar projects to find out how they have handled
similar situations. Discussing problematic work within your project with
your sponsor or stakeholders might generate some viable options, too.
As an absolute last resort, you can even consider taking responsibil-
ity for some of these activities yourself, depending on your availability

120 How can I get meaningful commitment from team members?
and background to do it. This may eat into time more needed for project
management work, though, and you will run the risk that on future proj-
ects no one will need to volunteer for ‘‘scut work’’; you will do all of it.
You will find some guidance on when this might be appropriate in Prob-
lem 49.
Tracking the Work
Reliable commitments depend on diligent tracking, so plan to collect
and report on status at least weekly. You will have to keep an eye espe-
cially on any work that is not very desirable or that you may have
assigned to anyone suspected to be undependable. You can find some
helpful ideas for dealing with due-date slippages in Problem 43.

Planning Topic
49. As a project manager, what should I
delegate and what should I do myself?
Depends on:
g Project and team size
g Skills and experience available on your team
As discussed earlier, project management responsibilities are generally
yours for any project where you are the designated leader. Delegation
of some of this work to others can be necessary and appropriate on
very large programs, but for the most part it is best to ‘‘delegate’’ all of
it, or at least the most essential parts, to yourself.
Project leaders can safely assume that their project management
responsibilities will consume roughly 10 percent of their time per con-
tributor on their teams. This time is consumed in meetings, communica-
tions, care and feeding of stakeholders, problem solving, hand-holding,
and other general project-related tasks. If your team is larger than about
nine people (whether they all report directly to you or not), you won’t
have much bandwidth available to take on other assigned work. Even
part-time contributors count—even though they might theoretically
require less attention, often they actually require more because of their
distractions and other priorities.
Assessing Your Potential Availability
Your project will probably be your primary responsibility, but it may
not be your only one. Consider how much time any other work you are
committed to will require, and include that with the overall assessment
of your workload. Also include any planned time off or other interrup-
tions such as organizational meetings that will take time away from your
project. If you have only modest other demands on your time and your
project is small, or you have a very experienced and competent team
that will require little attention, you may find that you do have some
amount of time to devote to other assigned work on the project.
In gauging your capacity, it’s prudent not to schedule more than
about 90 percent of your time in advance; you will need to be able to
react quickly to problems and issues as they arise.
121

122 As a project manager, what should I delegate and what should I do myself?
Delegating Project Work to Yourself
Even if you do appear to have some available work capacity, set a target
to delegate nearly all the project activities you define to your contribu-
tors. Consider yourself a last resort, and only assign yourself work that
is easily interrupted and not schedule critical. Your first priority should
be to the project as a whole, and if you assign yourself critical work you
are liable to find yourself with conflicting top priorities.
You may find that there are activities for which you are by far the
most qualified and experienced person on your team. Even for this work,
you should not consider yourself as the first option. It is difficult to
assign work to people who are less competent than you are, and it can
be painful to watch people fumbling through tasks that you can do blind-
folded. If you intend to take the role of project leadership seriously, you
need to get over this. Assigning work to your team members will build
the base of skills on your team, and it will leave you open to help and
mentor as needed in addition to all your other responsibilities.
In short, assign to yourself scheduled activities (other than those
directly related to project management) only when you have available
capacity, the work is noncritical, and you appear to be the only reason-
able option.
Remaining Flexible
Throughout your project, things will happen that won’t be as you
planned them. The main reason for leaving some available capacity for
yourself unscheduled is so you will be able to take on unanticipated,
emergency work as the need arises. If a key contributor is out ill or
otherwise indisposed, someone will need to step in. Effective project
leaders are always assessing the overall status and rebalancing the work
in the face of reality, so that progress can continue more or less as
planned. Delegating work to yourself during the project is nearly inevita-
ble, and if your ‘‘normal’’ workload consumes all of your capacity, the
only option open to you will be to work overtime. If you plan to see
much of your home and family during your projects, exercise great
restraint when delegating planned work to yourself.

Planning Topic
50. Who should estimate activity
durations and costs?
Depends on:
g Staff experience
g Project novelty
g Consequences of estimating errors
Project estimation is a complicated process, and for many types of proj-
ects it is not done with much accuracy. Doing it well involves the con-
tributors who will be responsible for the work and the project leader,
and may also benefit from inputs of experts, sponsors, and stakehold-
ers. Regardless of exactly who gets involved, precision and consistency
rely on good process and metrics, which are explored in Problems 51
and 52.
Establishing Objectives
Before any detailed, activity-level estimating can be done, there will be
high-level estimates for the project as a whole established by the project
sponsor and stakeholders involved in initiation. If the assumed cost and
duration are not consistent with the expected benefits and value, no
project will ever exist. These estimates may be based on some analysis,
or they may be wild guesses pulled out of the air; whatever their basis,
these initial estimates should be treated only as general goals. Although
they may also represent some known constraints, the initial top-down
estimates can be used only as provisional starting points. Setting a real-
istic project baseline requires thorough planning, analysis, and detailed
estimates developed by the team responsible for the work.
Involving Activity Owners
Project planning relies on good requirements definition and scoping,
involving the stakeholders as explored in Problem 22. The resulting
scope for the project provides the basis for a work breakdown struc-
123

124 Who should estimate activity durations and costs?
ture, which at its lowest level defines the tasks that must be done to
complete the project. Each of these tasks will need both a duration and
a cost (or effort) estimate, and the best source for the initial bottom-up
estimates will be the assigned activity owner plus any other contribu-
tors involved.
The first consideration for estimating will be the method chosen
to do the work. Effort and duration estimates depend strongly on the
approach and process to be used for the work, so once this is clear,
bottom-up estimates are possible. Other considerations for the initial
estimates include potential risks and any remaining unknowns, such as
any contributors who will be involved but are not yet assigned.
Involving Others
For work where there is ample precedent and a lot of experience, the
estimates provided by those who will do the work may be more than
adequate. For work that is novel or where you lack experience, you may
want to get outside assistance. Involving peers in your own organization
or networking with contacts in professional societies may provide use-
ful information. Even getting quotations or proposals from outside ser-
vice providers (whether you are considering outsourcing the work or
not) can provide potentially useful insight. Again, additional considera-
tions will include risks and unknowns, such as just how comparable the
experiences and metrics developed elsewhere will be to your particular
situation.
Adding Your (Skeptical) Inputs
The final arbiter of project estimates needs to be you, as the project
leader, because ultimately it’s your project. In examining the initial esti-
mates, be skeptical of any that appear either too conservative or too
optimistic. Ask questions about the basis for the cost and duration esti-
mates, and probe to uncover exactly how the work is to be done. If you
are not convinced that the people providing the estimates know enough
about the work, ask more questions. Especially if the estimates seem
too small, challenge the owner to break the work down further (whether
you intend to track at that level or not).
Compare the duration and cost estimates, and test if they are con-
sistent given what you know about how the work will be staffed. If they

Who should estimate activity durations and costs? 125
are not consistent, provide guidance for adjusting the cost estimate, the
duration estimate, or both. If staffing commitments for all of the work
are not in place, collect range estimates that will be refined later when
the skill sets of the contributors are known. If there are known risks
associated with the work, include an appropriate margin for reserve (to
be managed by you for the project as a whole, not to ‘‘pad’’ activity
estimates).
Finally, compare the bottom-up detailed estimates of cost to the top-
down objectives for project expense to see how much trouble you are
in. Consider options that might make sense for bringing costs more into
line with expectations if the variance is significant. Use the duration esti-
mates to build a preliminary schedule and test it against your project’s
timing goals. Again, if there are substantial differences, revisit options
that might realistically reduce durations (and also revisit workflow and
dependency assumptions, as discussed in Problem 54). In all cases
where your estimates exceed your initial constraints, document the
information that you will need to negotiate a realistic baseline with your
sponsor before formally committing to a fixed project objective.

Planning Topic
51. How do I improve the quality and
accuracy of my project estimates?
Better estimates, whether of durations or costs, rely on involving the
right people, using metrics, and having a good process. This problem
focuses on the process; staffing and metrics are addressed in Problems
50 and 52, respectively. Good process contributes to the quality of esti-
mates, but accuracy ultimately depends on the estimates being both
believable (which is where measurement comes in) and believed (partic-
ularly by those who must deliver on them).
Selecting Methods
The starting point for all project estimating begins with determining the
work methods. Before you have thought through the task at hand and
determined a credible plan of attack for completing it, any estimating
you do will just be a wild guess. To determine with any precision how
long an activity will take and what it will cost, you must be able to
describe what will be done and who will do it. If you have activities for
which you have no idea how to proceed, you will need to either figure it
out as part of your project planning or note it as a potential show stop-
per risk. As you are considering approaches for each task, challenge any
assumptions about how it ‘‘must be done’’ and search for efficiencies,
valid shortcuts, or other opportunities that could realistically save time,
effort, or even both.
Once you have a reasonable idea of how your team will approach
the work, there are a number of possible estimating techniques. Which
methods apply best depends on at least two factors: your experience
with the work, and the quality and relevance of any available historical
data. The table on the next page summarizes some common estimating
processes.
The best case is for work you have completed before where you
were paying attention. If your team has both relevant experience and
relevant metrics, estimating duration and cost should be straightfor-
ward and may require little more than simply looking up some figures
from past projects. If an activity is similar to past work but differs in
scale, you may have to estimate by adjusting your past measurements
126

How do I improve the quality and accuracy of my project estimates? 127
Relevant metrics exist No data is available
Prior activity
experience
No activity
experience
• Project retrospectives
• Databases
• Notes and status reports
• Parametric formulas and
experiential rules (“size methods”)
• Published information
• Vendor quotes
• Expert consultation
• Task owner and team inputs
• Peer inputs
• Inspections
• Delphi analysis
• Short (“2- to 20-workday” or
“80-hour”) WBS activities
• Further breakdown
• Guesses
• Doing part and extrapolating
• Outside help
• Older methods
to account for any ‘‘size’’ differences. For software projects, size may be
gauged in noncommented lines of code, function points, or similar units.
For other projects, counting pieces, components, block diagram ele-
ments, or other activity deliverable factors may be used to correct esti-
mates based on earlier experiences. Always be a little skeptical when
adjusting estimates based on size adjustments; the estimates of ‘‘size’’
for the current project may be little more than wild guesses themselves.
The precision of an estimate can never be any better than its least accu-
rate input.
The next best case is the upper-right quadrant, where the work is
familiar, but for some reason no one has ever kept any records. (In the
long run there is really not much excuse for this, but in the short run it
happens. Good project leaders strive to avoid this.) For activities of this
type, you may be able to get useful estimates by consulting others in
your organization (who may be more methodical in their note taking).
You can also base your estimates on anecdotal and other information
available within your team. Involvement and thorough understanding
of relatively small pieces of work is fundamental to good estimating
anyway, and for many project tasks the estimates that emerge from dis-
cussing and planning the work can be quite accurate. Collaborative esti-
mating techniques such as Delphi—where individual estimates are
collected from a group of people, clustered, and then discussed—are
also effective ways of tapping into historical information that is stored
in people’s memories instead of a database. These estimating ideas are

128 How do I improve the quality and accuracy of my project estimates?
also good means for validating estimates that are initially derived from
documented empirical data.
Because projects are all different and there will inevitably be at least
some work that is new, you will have at least a few activities where your
team will have little or no relevant experience. Don’t assume that just
because you have no experience with a type of work, no one does; there
may be useful information external to your team that you can tap into.
Research on the Web or consultations with outside experts may provide
an adequate basis for fairly good estimates. When using estimating data
from elsewhere, consider any significant environmental or infrastruc-
ture differences and adjust accordingly. Someone else’s past experi-
ences may differ substantially from those on your current project.
Nevertheless, even external information is generally a great deal more
useful than none at all.
The worst case is work where you have no experience and appar-
ently no one has any data. Here, the most popular project estimating
technique—guessing—is the primary method. With reasonable care in
planning and analysis, the number of such activities on a given project
will only be a small portion of the overall project, and even for these
there are techniques that can sometimes provide reliable estimates. For
some activities, you may be able to develop useful metrics by doing a
portion of the work. Working from what you learn, you can use your
data to estimate the duration and cost of the work that remains. Other
novel work planned for your project may be optional; there may be
tried-and-true older methods that could achieve the needed results. Sub-
stituting activities you understand better will yield better estimates,
lower project risk, and higher team confidence. Outsourcing the work
could be another possibility in some situations where the work is unfa-
miliar, but you may still be dealing with unreliable estimates unless you
have very good reason to believe the commitments that are made by
those contracted to do the work.
Verifying Estimates
Before integrating any estimates into your plans, compare the effort and
duration assessments for each activity. Consider what you know about
staffing, time commitments, other work, and any time off scheduled for
your team to determine if the estimates are consistent. When analyzing
duration, use a realistic number of hours devoted to project activities
per workday. It’s best to use a percentage for available time based on

How do I improve the quality and accuracy of my project estimates? 129
your past experiences, but if you lack relevant data use the general rule
of ‘‘about two-thirds.’’
If your time and effort estimates are not consistent (such as a two-
day duration for an activity expected to require eighty hours of effort
that will be done by a single person) adjust one estimate or the other
(or both) to align them. Also check that your cost estimates for each
activity include both any additional expenses associated with the work
and the cost of the estimated effort for the contributors involved.
Also consider risks by investigating worst cases. After you have col-
lected duration estimates for all the work identified, discuss each activ-
ity with its owner and ask what might go wrong or cause the work to
take longer. If what you hear seems very probable, consider increasing
the estimates. If you learn about possible failure modes that are rela-
tively unlikely but still significant, note them as risks. If the conse-
quences of a potential problem are particularly severe, think about
other work methods or approaches that could avoid the risk. If there is
a better option, adopt it and reestimate the work based on your modi-
fied plans.
For the project as a whole, check that the effort (and cost) estimates
in total are generally in line with the actual results of previously com-
pleted similar projects. If the totals seem too small, revisit any estimates
that appear to be excessively optimistic. Missing project activities in the
initial plans is a frequent reason that projects are underestimated. Also
carefully examine the work breakdown structure of any projects where
the overall estimates seem too small, to check for required project work
that is not yet included.

Planning Topic
52. What metrics will help me estimate
project activity durations and costs?
Project estimates are predictive metrics, and because they are forecasts
about the future they tend to be somewhat imprecise. You can improve
them substantially over time, however, by collecting actual measure-
ments at the end of completed projects. These retrospective metrics
provide feedback to improve your estimating processes, outlined in
Problem 51, and to increase the confidence of those involved in estimat-
ing, discussed in Problem 50.
Assessing Actual Activity Performance
At the activity level, the status you collect throughout the project will
either confirm the predictions in your plans or clearly show where you
were in error. There are many metrics useful for this, including basic
status measures such as:
g Actual activity durations
g Actual activity effort consumption
g Actual activity costs
g Performance to standard estimates for standard project activities
g Variances in travel, communications, equipment, outsourcing, or
other estimated expenses
g Number of added, unplanned activities
Estimation in aggregate is also useful. Metrics for evaluating your plan-
ning process as a whole include:
g Total project duration
g Total project effort
g Total project cost
g Cumulative overtime
g Staff turnover and added staff
g Life-cycle phase effort percentages
g Earned value management (EVM) and related measures
130

What metrics will help me estimate project activity durations and costs? 131
The first several are simply aggregations of activity-level metrics. Proj-
ect duration, effort, cost, and overtime measures are useful in detecting
problems with the thoroughness and accuracy of your overall planning
process. Variance in these metrics can reveal gaps or inadequacies in
what you know about your projects. Possibilities for reducing the incon-
sistencies include process improvement, allocating more effort to proj-
ect planning, and doing a better job of risk management. Unexpected
staff turnover or adding staff can also lead to significant estimating prob-
lems, because dealing with midproject learning curve issues usually
consumes substantial unplanned time and effort.
Life-cycle measures are useful for spotting underestimates and miss-
ing work in project plans. Similar projects over time tend to have compa-
rable ‘‘shapes,’’ with effort percentages that fall into predictable patterns
that vary little from project to project. By comparing the percentages of
work in each phase of plans under construction with those collected
from previously completed projects, you can identify significant omis-
sions and other problems.
When comparing your plans against norms, check whether there
is a disproportionate amount of effort allocated to ‘‘development’’ (or
whatever the phase of your life cycle is called where most of the work
is done to actually create the deliverable). People associate most
strongly with this part of their projects—it’s where programmers pro-
gram, carpenters build stuff, writers write, and in general, where all of
us do whatever it is that we say our job is. Because people tend to focus
on this, it is not unusual for this part of the plan to be fairly complete
and well estimated. The rest of the plan gets less attention and may be
severely underestimated, either out of inattention or through wishful
thinking. Nevertheless, all the work is real and even the tasks that are
initially missing from unpopular portions of the project will have to be
completed before closing the project. Failing to identify (or underesti-
mating) them won’t change this. As the planning process comes to com-
pletion, check the relative percentages across all the life-cycle phases
before baselining your project. If the ‘‘development’’ phase or phases
represents a higher percentage of the overall work than is typical, look
for the work you have missed in the other life-cycle phases.
Also look for the relative balance between early project analysis and
late-project testing, in both your current project and the norms from
your post-project metrics. When too little attention is devoted to early
project phases, the inevitable price to be paid will be a large late-project
work bulge. When you start your project with a solid understanding of
what your project is, the closure phase will involve a lot less thrash. You
will significantly reduce rework, have fewer remedial efforts to complete

132 What metrics will help me estimate project activity durations and costs?
work you missed, and experience less overall trouble finishing your
project.
The last item listed, EVM, can be quite controversial in project man-
agement circles. EVM involves substantial planning overhead, and
frankly, there are many projects for which the cost of a full ‘‘bells-and-
whistles’’ implementation will dwarf the value it provides to the project
leader. Although this is hard to disagree with, there may be other con-
siderations. For projects done on a contract basis, and especially for
those where it is mandatory, the planning and status information
required for EVM implementation will be (or certainly should be) readily
available. Even for other projects, much of the foundation required for
EVM is included in basic planning.
EVM basically concerns only three metrics: planned value (PV),
actual cost (AC), and earned value (EV). PV is a predictive metric based
on cumulative activity cost estimates, evaluated across the project time-
line. This is something that emerges easily from the cost (or effort) esti-
mates that project leaders should be developing anyway, and should be
easily derived from the project baseline. At the project deadline, PV is
equal to the ‘‘budget at completion’’ because all estimated project costs
will have been accumulated by the end of the project. AC is a similar
metric, but it is diagnostic, evaluated as the project runs from the col-
lected status. AC is the sum of all costs (or, again, effort) accumulated
by the project up to the current status date. Although not every project
collects effort/cost data as part of weekly status, it can be very useful to
do so.
The problem that EVM attempts to solve is that even if you set PV
for the project’s entire run and evaluate AC with each weekly status,
you can’t learn much by directly comparing them. If there is a difference
between these metrics, the cause might be due to a timing factor, a cost
factor, or some combination. In fact, even when your project is in trou-
ble these two metrics can be the same, as long as the effects of the
timing and cost factors offset each other.
EV is the third metric in EVM, and it was created to deal with this
quandary. EV combines the estimated costs (same as PV) with the
actual schedule performance (same as AC). As a result, we can compare
EV with AC, and if there is a difference it must be due to a variance
between the expected and actual cumulative costs for the completed
work—the timing information is always the same. If there is a difference
between EV and PV, this result can only be due to a difference in sched-
ule performance for the same reason. The table on the next page shows
how these three metrics relate to one another and to your project’s two
schedules and two budgets.

What metrics will help me estimate project activity durations and costs? 133
Planned Expenses Actual Expenses
Planned Schedule Planned Value (PV)
Actual Schedule Earned Value (EV) Actual Cost (AC)
Budgets
Schedules
Evaluating EV at any point in the project requires only the status
data needed for PV and AC. If you are already collecting this data, imple-
menting EVM need not be difficult.
Even if you are not collecting status data at this level of detail, you
can still devise a ‘‘poor man’s’’ rough equivalent that can be used for
nearly any project. EVM allocates the total project budget bit by bit to
your project activities, based on estimated size. You could also devise a
much simpler approximation, however, where the budget (or total
effort) is spread evenly—if there are 100 activities, each gets 1 percent
of the budget. Early in the project the distortion this causes may be
substantial, because the difference between the accumulated simple
average costs and cumulative activity cost estimates is likely to be sig-
nificant for such a tiny number of tasks. As the project progresses,
though, the number of activities grows and the accumulated results,
both planned and actual, will converge with the average (especially if
you observed the work breakdown structure guidelines and most of
your project activities are of similar size).
There are dozens of additional metrics associated with EVM, but all
are compound metrics involving the basic three: PV, AC, and EV. It’s
possible to get so complicated with EVM that it makes your head
explode, but obtaining useful information for project tracking and
improving your estimation processes using something like EVM need
not be overwhelming.

Planning Topic
53. How can I realistically estimate
durations during holidays and other
times when productivity decreases?
Depends on:
g Project length
g Geographical distribution of the team
g Project urgency
Identifying Holidays
If you have team members who work in different locations or for differ-
ent organizations, ask about their holiday schedules. You might be able
to find Web pages containing such information, but it is always better to
ask. In some locales not everyone takes every holiday, and there may
also be ‘‘personal holidays’’ that you should know about. Around major
holidays productivity is likely to deteriorate, so use historical informa-
tion to adjust durations estimates on activities around these periods,
such as for work done at year-end in the United States, Europe, and
other locations where people will probably be distracted by Christmas,
New Year’s, and other festivities. In Asia, be sensitive to the impact of
the Lunar New Year (and note that like Easter it moves around on the
calendar from year to year). Also be skeptical of any significant mile-
stones that fall near these major holidays, the ends or beginnings of
school years, or other times when people are likely to be away from
work.
Accounting for Other Project Absences
As part of your estimating process, collect vacation schedules from your
team. On longer projects, place reminders in your calendar to refresh
your vacation schedules at least once per quarter. Request that the
members of your team inform you as soon as possible when they learn
about jury duty, doctor’s appointments, military service, family respon-
134

How can I realistically estimate durations during holidays? 135
sibilities, or any other obligations that will take them away from work
and your project.
You also need to schedule project work around organizational
events and dates. Inquire about any upcoming ‘‘all hands’’ meetings that
are scheduled, and note their dates. Consider any impact of the fiscal
boundaries such as quarter- or year-ends, and any other important
dates in your organization. If any particular dates are likely to affect
your project, adjust your estimates to schedule around them.
As the expected timing for specific activities takes shape, note and
resolve any conflicts with your contributors’ scheduled time off and
other date-related issues. Work with the task owner to adjust the esti-
mates, extending the durations as needed to reflect when people will
and won’t be available. Relocate key project milestones that fall near
important external dates to more realistic time frames.
No matter how thorough your plans are, you will never have perfect
information. Things happen, including illnesses, emergencies, and even
things that people are aware of but forgot to tell you about. Establish
some schedule reserve at the project level to deal with this, sized using
typical project experience with unanticipated absences from recent
projects.

Planning Topic
54. How can I develop realistic
schedules?
Depends on:
g Project scale
g Project novelty
g Team commitment
Establishing a Foundation for Scheduling
Realistic schedules require thorough work breakdown structures con-
taining activities of modest size at their lowest level of detail. Use
guidelines such as ‘‘no larger than eighty hours of effort’’ or ‘‘dura-
tions between two and twenty days’’ to ensure that your granularity
will be appropriate for realistic control and monitoring of your
planned work. You may need to break up very large projects into sub-
projects to build useful schedules; practical schedules generally have
no more than approximately 200 activities. It is very unlikely that you
will be able to manage your project well if your scheduled tasks are
too big or if you have too many of them.
Good schedules also rely on good estimates. Factors to consider for
creating better estimates are found in Problems 50 to 53.
Sequencing the Work
Armed with a robust list of project activities for which you have believ-
able estimates, you have what you need to analyze the workflow. Realis-
tic schedules are based on contiguous chains of well-defined activities
and milestones. Each scheduled item should be directly linked both
backward to the project start and forward to the project end. Using your
duration estimates and workflow dependencies, you can define a net-
work containing unbroken sequences of work that integrate all required
project activities.
Project schedules contain activities, which are derived from the low-
est level of your project work breakdown structure, and milestones,
136

How can I develop realistic schedules? 137
which are important ‘‘moments in time’’ for your project. Activities
require estimates for both duration and cost/effort. Milestones are
events with no duration and usually require no scheduled effort. Mile-
stones may be used to identify the starts and ends of life-cycle phases,
to synchronize related activities, and to show key external dependen-
cies. By convention, project schedules begin with a start milestone (or
a milestone with some similar name) reflecting the date when the work
is expected to (or actually did) commence.
Realistic scheduling is a team process, so involve your team mem-
bers in the workflow analysis process, including at least the activity
owners who provided your initial estimates. Effective scheduling also
benefits from creativity, so it’s best done using a method that fully
engages the ‘‘left brain.’’ Scheduling a project by yourself, hunched over
a computer screen, will guarantee that you will miss things—probably
significant things. Alternatively, using yellow sticky notes on a wall,
whiteboard, or large piece of paper allows you to move things around,
see the emerging big picture, simultaneously engage a team of collabora-
tors, and remain flexible. Gather your team members where you have
space to spread things out and begin your scheduling process with a
sticky note for your start milestone.
Select every defined activity in your project that has no work that
must precede it and link it backward to the start milestone using a pen-
cil (or something else you can easily erase). Continue this process by
linking activities to work that must precede it, adding milestones into
your evolving network as necessary, until all project activities are
accounted for and each is part of a continuous path connecting the start
and an end milestone marking the end of the project.
As you progress, some links will need to be adjusted because your
initial workflow assumptions may need adjustment as you incorporate
new activities. In other cases you may find that two activities are con-
nected, but not directly. In order to model project workflow, you may
need to add new activity to your project work breakdown structure
before it can be interposed between the already identified tasks. You
may also find activities that need to be broken into separate parts that
are separated in your network. Consider scenarios and focus on the
questions, ‘‘What do we need to do before we can begin this?’’ and
‘‘What comes next, following the completion of this task?’’ Add work as
necessary, striving to build a contiguous network of activities showing
credible sequences of work that will enable you to complete the project.
Update your project work breakdown structure to reflect any modifica-
tions made during the scheduling process.

138 How can I develop realistic schedules?
Avoiding Fixed-Date Schedules
Once you have a network of linked activities that appears to be reason-
able on a wall somewhere, you will likely want to enter it into a project
management computer tool. (Software tools for scheduling are dis-
cussed in Problem 97.) Scheduling tools allow a wide variety of modeling
techniques, including the linked dependencies of predecessor/succes-
sor workflow analysis discussed here. These schedules are very useful
for tracking, control, and ‘‘what if’’ planning.
Computer tools also allow you to build project plans with ‘‘must
start on’’ and ‘‘must end on’’ logic, but for the most part this is a bad
idea. Fixed-logic schedules, like activity estimates that are unrealisti-
cally forced into line with constraints, are not all that useful because
they don’t model what you expect to occur. Such ‘‘schedule to fit’’ plans
tend to be mostly wishful thinking. In addition, if the necessary workflow
is not modeled using a linked network, you will be unable to determine
the consequences of any slippages or proposed changes that occur in
your project. Nailing your activities to arbitrary calendar dates may look
like a plan and appear to meet the overall timing objectives, but if it’s
unrealistic it really helps no one.
It’s best to develop a bottom-up schedule for your project based on
logical workflow and credible duration estimates, and enter that into the
computer. If the resulting end date fails to meet the initially stated goals,
explore alternatives for linking the work that could realistically shorten
your timeline. If your best analysis leads you to the conclusion that your
project will take longer than desired, document your plans as they are
and use the data in negotiating necessary adjustments before establish-
ing your project baseline as discussed in Problem 78.

Planning Topic
55. How can I thoroughly identify and
manage external dependencies?
Nearly every project has at least some external dependencies. At least
the initial request and the final deliverable generally involve a connec-
tion to parties outside of the project. In addition, there may be myriad
other outside connections, for parts, information, decisions, and many
other external dependencies. Managing these connections starts with
identification, and it relies on meaningful commitments and tracking.
Identifying External Dependencies
The most important external dependencies for most projects involve
the initial requirements and the ultimate acceptance of the project deliv-
erable. Ideas for managing customer and stakeholder expectations are
found in Problem 22.
For projects that are part of a larger program, there are many exter-
nal connections to the other related projects in the program. Dealing
with program interconnections is discussed in Problems 26 and 56.
For both of these situations and for all other external dependencies,
the first step is to examine all inputs required before project activities
begin to isolate those outside your control. For the inputs that are deliv-
erables from other project activities, establish a predecessor/successor
dependency linkage in your own project network, as discussed in Prob-
lem 54. For inputs within your own project, specifications may be some-
what informal, but they should be sufficient to ensure that the handoff
results in smooth continuation of the project workflow. For any inputs
that are external to your project, however, you’ll need to be explicit and
precise, including any mandatory performance criteria. Also include any
timing and other information related to external inputs.
Some of your activities will also create outputs that will be used
outside your project. Also document specifications and expected timing
for your external deliverables.
Effective planning strives for a thorough understanding of all project
activities. One way to ensure this is to create a ‘‘WBS dictionary’’ in a
computer scheduling tool (or some other database or spreadsheet).
This is an effective way to collect and maintain information related to
139

140 How can I thoroughly identify and manage external dependencies?
all the tasks you need to manage. One approach for organizing all this
data is the ‘‘ETVX’’ (Entry, Task, Validation, Exit) model. ‘‘Entry’’
includes all the inputs you require, internal and external, to your proj-
ect. ‘‘Exit’’ specifies all of your expected outputs. ‘‘Task’’ and ‘‘Valida-
tion’’ provide information on the work you will need for estimation,
execution, and control. Using such a structure, you can easily gather all
of your external inputs and outputs for specific attention.
Negotiating Commitments
Once you have your external dependencies identified and documented,
confirm them. For approvals and decisions, work with your sponsor,
management, and stakeholders to set expectations and deadlines
related to what you will need and when you will need it. For specifica-
tions, documentation, or other information that must flow into or out of
your project, approach your partners and come to an agreement about
specifics and due dates. Obtain specific agreement from the provider of
each required input, whether tangible (parts, components, equipment)
or intangible (documentation, software, process information). For
inputs that come from outside of your organization, document each
agreement with a contract, a purchase order, or other legal document.
For contracts covering project deliverables, consider adding terms for
incentives and penalties that might increase the probability that you
will have what you need on time. For any inputs that are external to
your project but inside your organization, exchange a ‘‘memo of under-
standing’’ or similar commitment document to verify your shared under-
standing of what is needed and when. If you have difficulty coming to
agreement on any of your inputs, escalate the matter to your sponsor
or other management to secure the agreements you need, or seek other
options for meeting your needs. Resolve everything you can through
commitments during your planning. If you don’t, you’ll need to do so
later during execution—and by then it may be too late.
If, even after securing a formal commitment, you are not confident
about the delivery of any critical external inputs, consider exploring
other alternatives. In some situations, you may want to switch to
another provider. For others you might consider obtaining a redundant
commitment from another provider in addition to your primary sup-
plier. Second sourcing is an important risk management tool, and it may
be cheap insurance for keeping your project on track.
Document and confirm commitments for all your outputs, too.
Although it may seem less important to worry about situations where

How can I thoroughly identify and manage external dependencies? 141
others are depending on you, this is central to maintaining stakeholder
support. Also, it’s a small world; you may be dependent on the folks you
are sending stuff to today to provide things you’ll need tomorrow.
Tracking Commitments
Obtaining agreement is only half the battle. You also need to ensure
performance. As the time for a required input approaches, reach out to
the provider with a reminder at least a week in advance. For inputs such
as decisions and approvals, include a description of the consequences
of delay to your project, and if possible arrange for the authority to
proceed using your own judgment if the approvals and decisions you
require are not timely.
For commitments that have lengthy durations, collect meaningful
status on progress periodically as the work proceeds. Find opportuni-
ties to participate in any interim testing or evaluations related to the
inputs you need to verify progress.
As with all project status, diligently monitor what is going on. If
problems develop with any of your external dependencies, work with
your partners one-on-one to resolve them. As a last resort, escalate
when necessary to deal with situations that you are unable to resolve
on your own.

Planning Topic
56. How do I synchronize my project
schedules with several related partners
and teams?
Large, complex projects—or programs—are typically decomposed into
a set of related smaller projects to facilitate managing the work and for
overall control. The structure and processes for setting up programs
are discussed in Problems 21 and 26. This problem focuses on program
planning and integrated scheduling. The overall process is based on
each project developing a reasonable stand-alone schedule. Starting
with these project schedules, you then iterate through a series of inte-
gration steps to establish a set of schedules at both the project and
program levels that are logically consistent and can be used for tracking
and control.
Planning Each Component Project
After establishing a first-cut decomposition of a large program into proj-
ects, the program manager must find a competent leader for each one.
These leaders should be experienced with the work to be done and take
full responsibility for their pieces of the overall program. Each project
leader also will lead a team of contributors who will do the work largely
autonomously on their portions of the program.
The first step in program planning is to encourage the leaders to
work with their team to develop a credible plan for their own project.
For this, each leader will need a shared understanding of the program
objectives, consistent definitions for life-cycle deliverables, and all
required program testing and acceptance criteria. Integrating disparate
schedules is never easy, but it can be made a lot more straightforward
if you establish formatting standards in advance, provide planning tem-
plates to ensure consistency, and strongly encourage (or mandate) the
use of a common computer tool to be used for all project planning.
Selecting software tools for large programs is discussed in Problem 98.
For each project, the assigned project leader and staff need to
develop a work breakdown structure for their work and develop esti-
mates for the resulting activities. From this they can build their initial
142

How do I synchronize my project schedules with several partners? 143
schedules based on all identified dependencies, both within their proj-
ect and external to it.
Identify all external connections for each project using a process
similar to that in Problem 55, and document each project schedule in
preparation for integration into the overall program plans using the for-
mat and any computer tools set up for the program.
Iterating the Program Plans
The overall goal of program planning is to keep all of the planning efforts
synchronized. Following the detailed planning efforts for each of the
projects in the program, you can do a trial program schedule integra-
tion. This initial integration is typically a mess, but a thorough inspec-
tion will identify the most significant interconnection and timing
problems. Using this as feedback, the next iteration will be a great deal
cleaner.
One type of large program undertaken by a Hewlett-Packard division
used a ‘‘Straw-Silver-Gold’’ process for this program and project plan
integration. The process started with program decomposition and
staffing, providing each project team with early program information.
Each team used this information to create its initial project plans
quickly. All these early project plans were then pulled together into a
‘‘Straw’’ program plan to see how things looked. Each project plan
included a number, sometimes a large number, of external dependen-
cies on other projects, and inevitably there were many issues related to
project interconnections and timing. Nonetheless, the overall integrated
program had some parts that began to look coherent, with formal agree-
ments on the interfaces ready to be formally signed off by the project
leaders involved.
The initial integration also could be used to validate all, or at least
large portions, of the initial program breakdown, and highlight the most
significant scheduling problems to be resolved. Sometimes this trial
integration revealed that there were too many project interconnections
to permit the project leaders to operate with much autonomy. In these
cases, the initial program breakdown would be discarded in favor of a
better program decomposition with a cleaner overall structure. This
step sometimes also resulted in adjustments to the leadership and com-
position of project teams to align with the new program hierarchy. Using
this revised program breakdown, the project leaders would try again
and redo their ‘‘Straw’’ phase.
The output of the ‘‘Straw’’ planning iteration would be a quantity of

144 How do I synchronize my project schedules with several partners?
loose ends and timing problems, provided as feedback to the project
leaders. Based on this, the project leaders and their teams would build
their improved set of ‘‘Silver’’ plans, which were used for the next try at
program plan integration. This version was also imperfect, but the num-
ber of issues discovered in this iteration was relatively small.
Feedback from this second program planning iteration could be
used for the third, ‘‘Gold,’’ project planning iteration. The ‘‘Gold’’ ver-
sion, usually the final one, provided the project plans from which the
overall program plan could be built and baselined. It also contained doc-
umentation of all the listed cross-project dependencies and interfaces,
each explicitly agreed to by both the providing and receiving project
leader using a formal sign-off procedure.
Maintaining Program Plan Integration
Ongoing program and related project planning also depends on periodic
review and adjustment of plans and objectives. Schedule ‘‘rolling wave’’
planning exercises at least every six months throughout any major pro-
gram to refresh the project plans and your program-level integrated
plans. Use planning reviews to pick up changes, emerging issues, new
risks, and any interfaces that may have been missed in earlier planning.

Planning Topic
57. How do I effectively plan and
manage a project that involves invention,
investigation, or multiple significant
decisions?
By definition, all projects are unique and involve at least some aspects
that have not been done before. For some projects, the changes
between one and the next may be minor, and project planning may be
adequately done using little more than a copy machine and a red pen.
For projects where you are blazing new trails, though, there may be
substantial work required for which there is little precedent. Project
management processes may seem inadequate for these ‘‘bleeding-edge’’
efforts, but even here they help by allowing you to segregate the known
aspects from the unknown and focus better on what matters most.
Deining the Project
Even on a project where you may be uncertain about the method or
even the feasibility, you should still be able to outline at least the ques-
tions that need to be answered, the number of options that must be
explored (at least roughly), or the number of identified issues to be
resolved. You also will know about standards and process steps that
have been used on past projects of similar type, and can identify some
‘‘boilerplate’’ activities such as preparations for management reviews
and other tasks typical of recent projects.
Gather your project definition information together and work with
your team to create a work breakdown structure (or at least a list) con-
taining the activities that you are aware of that are necessary to deal
with the questions, options, feasibility issues, and other aspects of the
project. For each listed activity, characterize it as either a ‘‘known’’
(something that you can assign, estimate, schedule, and track) or an
‘‘unknown’’ (something where you have no clue how to proceed). Clas-
sify activities that seem to fall between the categories with the
‘‘unknowns.’’ Get a sense of the overall magnitude of work represented
by each category.
145

146 A project that involves invention, investigation, or multiple decisions
Planning for What You Know
For the activities that fall into the known category, confirm your activity
definitions, assign an owner, and apply good project management plan-
ning and tracking processes for executing and controlling the work. If
the known activities appear to represent less than half of your overall
project, you might consider delegating the coordination of all of them to
someone on your team, so that you will be better able to focus on the
larger, unknown portions with less distraction.
In any case, applying good project processes to manage the more
straightforward parts of the work will remove them from the list of
things you will be constantly obsessing and worrying about, and it will
reduce the overall amount of project chaos. If you use the fact that some
parts of a project are difficult to plan precisely as an excuse to not plan
at all, it will just make a hard project even harder.
Dealing with What You Don’t Know
Even for the parts of your project that you cannot plan well, project
management practices can help you to rein in some of the disorder. If
the number of unknowns is very large, consider splitting the project
into two projects. The initial project will be relatively small, focusing on
investigation, feasibility, and answering most of the open questions. Its
deliverable will be either a concrete proposal for a larger, follow-on proj-
ect to deliver on the initial objective if that is a prudent business deci-
sion, or a recommendation to go no further (or to initiate an alternative
investigation).
You can use your WBS (or task list) to identify skill gaps on your
team. Use your skills analysis to justify adding contributors with the
needed skills to your team or to get approval and plan for the training
and development needed by your current team members. Your WBS
may also reveal that you have insufficient staff, and can help you to
justify increases in resources or a more realistic project timeline.
Some of your unknowns may be due to technological choices or
other decisions that could be revisited. When viable, consider using
older, better understood technologies, processes, and methods to
reduce the amount of ‘‘unknown’’ work and improve your control.
Don’t assume that what you don’t know is not known to anyone.
Explore what your peers inside your organization know, and network
outside through professional associations or other groups to gain

A project that involves invention, investigation, or multiple decisions 147
insight into the experiences of others. Investigate hiring or contracting
experts who have relevant backgrounds that could reduce your uncer-
tainty and risk.
If you must commit to a project that has a large amount of uncer-
tainty, mitigate it by applying good project management practices. Iden-
tify the riskiest work, and begin it as early as possible in your project.
This will provide you with the most options for dealing with problems
and will allow you to shut down projects you discover are impossible
with minimum investment. Also plan to start any work requiring very
specialized internal expertise or outside contract help early in your proj-
ect. Isolate the most difficult jobs in the project and assign them to your
best, most competent, and creative people. When prudent, initiate paral-
lel (redundant) development efforts, employing alternative methods to
increase your probability of ultimate success.
Use your WBS analysis to identify and list the key questions that
your project must answer or issues that must be resolved. Although you
may not formally sequence this work in a traditional schedule, as time
passes you can still monitor how much you have completed, how things
are progressing with others, and what work you have not started. If your
rate of progress is not consistent with your overall objectives, you can
use this information to decide whether to stop or revise the project.
(For example, if in a six-month investigation you must resolve ten issues,
it might be reasonable to expect that at the three-month point, five
would be completed or at least showing significant progress.) You can
similarly partition high-uncertainty project work into checkpoints, with
defined measures of progress to demonstrate continued, appropriate
movement toward project completion. With some creative thinking, you
can develop a sense of workflow for most undertakings that will reduce
chaos and provide you with a means for assessing your progress. Status
information such as this will also be useful for keeping your stakehold-
ers up-to-date and help you in managing their expectations.
Set up in-depth reviews for projects having substantial unknowns
approximately quarterly, and use the reviews to make decisions on fur-
ther funding, continuation with project modifications, or cancellation.

Planning Topic
58. How should I manage adoption
of new technologies or processes in
my projects?
Depends on:
g The nature of the project
g The experience of the team
Analyzing Costs and Beneits
Even when there are compelling reasons to adopt something new,
change is never easy. Big project changes increase risk and will proba-
bly be resisted by at least some of your contributors and stakeholders,
so you will need to manage these changes carefully. A prudent project
leader will assess three estimates before committing to a change: the
cost of remaining with the status quo, the cost of transition, and the
monetary benefits of making the change.
In building the business case for a change to a new process or tech-
nology, you first must estimate the consequences of staying with your
current methods. You probably have some reasonably good data on
existing costs, but you may need to adjust them to reflect any projec-
tions or trends that could affect them. Work to understand any signifi-
cant recent or expected shifts when developing your economic analysis
of the status quo.
For both the costs and benefits of a change, your numbers will prob-
ably be far less reliable. If the estimates are provided by those in favor
of the change, transition costs are likely to be optimistically minimized,
and benefits may be inflated. When changes are assessed by people who
are opposing them, the reverse is usually the case—costs are huge and
benefits seem negligible. Good decision making requires a lot of skepti-
cism, ensuring that the estimates for both costs and value are plausible.
For the benefits estimated (which tend to be optimistically too high),
it’s useful to ask questions such as: ‘‘What is that estimate based on?’’
‘‘What might happen that could decrease the value or effectiveness?’’
and ‘‘Says who?’’ (Well, maybe not the last one. . . .) If the benefits
appear to be overblown, make your own estimates to share with your
148

How should I manage adoption of new technologies or processes in my projects? 149
stakeholders. In verifying cost estimates for a change, check that they
include any project impact that you are aware of as well as all the
expenses expected with such changes.
If the overall financial analysis that emerges from your analysis is
positive, embrace the change and use the business case to help build
support for it. If the overall numbers are shaky, share them with your
sponsor and key stakeholders. If the proposed change is not a good
idea, use your influence to avoid or modify what is being proposed.
Planning Conservatively
If a major change will be part of your project, plan conservatively. Reas-
sess the skills and knowledge necessary on your team, and be realistic
about the aptitudes and interest your team members have in the
change. If you need additional or different staffing, begin working with
your sponsor to obtain it. In estimating, consider learning curve issues
carefully, increasing estimates as necessary to deal with them. If training
will be needed by any of your contributors, incorporate the funds
required to pay for it in your cost estimates.
Consider all unknowns and risks carefully, and develop contingency
and fallback plans to recover if you encounter problems. Also analyze
worst-case scenarios, and use your data to build adequate schedule and
budget reserve into your plans.
Securing Buy-In
Change is hard. Except for the parties pushing for it, most will resist it
at least to some degree. To move forward with a change successfully,
you’ll need to build support.
If you need buy-in from your management or project sponsor, set up
a meeting with them and come equipped with facts and figures. The
business case will be central to these discussions, but also consider any
other specific benefits of the change that will matter personally to those
you report to. If the change will result in a better deliverable, a shorter
project, greater efficiency, or anything else that matters to your manage-
ment, document it. The more you are able to connect the benefits to
things your sponsor and key stakeholders care about, the easier it will
be to gain their enthusiastic approval.
If you need to get support from your peers and your team, consider

150 How should I manage adoption of new technologies or processes in my projects?
this ‘‘what’s in it for me?’’ factor from their perspective. When discuss-
ing the change, focus on anything about it that will make each individu-
al’s life better or work easier, and on its importance to your shared
management. If the new technology or process is a learning experience
that might be desirable, stress that. If you have success stories or spe-
cific, credible measures from any prototyping or testing that support
your case, discuss them. Gaining a meaningful commitment for a suc-
cessful change will require overcoming the resistance of others using
credible information and your best persuasive skills.

Planning Topic
59. How should I plan to bring new
people up to speed during my projects?
Except on very short projects, you may rarely end a project with the
same people you started with. Turnover, project changes, reorganiza-
tions, and many other factors can affect the composition of your team.
The keys to dealing with this effectively are doing what you can to antici-
pate and be prepared for changes, and working through them quickly
and efficiently.
Anticipating Staff Changes
As your project plans come together, consider what the impact of losing
each member of your team might be. If you had to replace a specific
individual, what work would be at risk? What could you do to replace
the person? What would a new person need to know to effectively step
into the shoes of a missing team member in terms of assignments, neces-
sary skills, and other factors? For team members with particularly spe-
cialized skills, take this exercise very seriously, and identify when in
your project losing a critical contributor would be most damaging.
Develop, at least for your own use, a contingency plan outlining what
you would need to do to work through any loss of key personnel.
Also scan your plans for any places where you know your team will
(or might) change. If a future phase of the work requires additional
workers, add activities to your schedule for bringing them into the proj-
ect and up to speed. Estimate any expenses associated with hiring, train-
ing, or other direct costs of adding them to your team. Adding a significant
number of people will generally occur at a life cycle or other significant
milestone, so you may be able to smooth the transition by incorporating
elements of a project start-up workshop into your scheduled project
review meetings.
Replacing staff can happen at any time and may require a lot of your
effort. This is one of many reasons it’s a bad idea to overbook your
own schedule. Ensure that you retain sufficient slack in your formally
scheduled project responsibilities to allow for this and other unantici-
pated bumps in the road. As your project progresses, remain vigilant for
signs of potential turnover. Minimizing turnover is essential to success-
151

152 How should I plan to bring new people up to speed during my projects?
ful project management and is explored more deeply in Problem 64.
Remember, it’s a lot easier to retain a team member than to deal with
the effects of losing that person.
As you prepare to baseline your plans, incorporate adequate budget
reserve for dealing with the likely costs of staff turnover in your overall
provisions for dealing with project risk.
Adding New Team Members
If you do lose a contributor or for some other reason need to bring a
new person into your project, integrate the new person into your team
as quickly as you can. Make the time to meet and get to know the other
person, shifting your other duties around if necessary. Work to build a
good personal relationship and establish trust with your new contribu-
tor. Also work to connect the new person with others on your team in
meetings and other interactions to build and maintain good teamwork.
If you have lost a key contributor, determine which responsibilities
can be picked up by the new person, and how quickly. If there are things
that the new person cannot do right away, determine who could assume
responsibility and shift your plans to make best use of the talent you
have available. Even if the added person is primarily taking on new activ-
ities, review your overall plans as you develop a better sense of what
that person is good at and likes to do. Consider changes to your team
assignments where they make sense.
It’s best to add people at the start of a project and keep them
together throughout the work. Unfortunately, this is not always possi-
ble. When changes bring new people into your team, make the time to
rebuild cohesive teamwork and to rebalance the task assignments
among your contributors. This is never easy, but failing to do it
promptly can make it a lot harder and may lead to project failure.

Planning Topic
60. How can I resolve staff and resource
overcommitments?
It’s common for projects to have more work than the assigned staff can
complete in the time available. Dealing with this problem begins with
thorough resource planning and will require adjustments to the time-
line, the scope, or both.
Resource Planning
The first step in managing resource shortfall issues is identifying them.
Start by documenting your project’s available resource capacity. When
assessing your staff availability, account for all other team member com-
mitments outside your project, especially those of any part-time con-
tributors. Also consult the actual resource profiles from past projects,
and use these metrics to adjust your available capacity to account for
illnesses, emergencies, and other inevitable absences.
As your overall project schedule and staffing plans come together,
scan your overall resource requirements to identify any periods where
you have insufficient staffing, equipment, or any other needed resources.
For large projects, you may want to enter your timing, staffing, and other
activity data accurately into a computer-based project management
scheduling tool and generate automated resource histograms. For mid-
range projects you could inspect your scheduled work, week by week,
and enter resource information into a spreadsheet or a table. You can
also do this even more simply, at least for small projects, by scanning
your time-based workflow plans and imagining the project work as it
progresses. Scheduling ‘‘traffic jams,’’ where several simultaneous activ-
ities all require the same resources, are often fairly obvious.
Revising Plans
Note any significant overcommitment problems in your initial plans, and
begin considering possible adjustments to remove, or at least to mini-
mize, them. If you are fortunate, there may also be spots in your plans
where some of your staff may be undercommitted. If so, shift the timing
153

154 How can I resolve staff and resource overcommitments?
of some work to exploit the variances and better balance your staffing
with your schedule. (In theory, this can also be automated using the
‘‘resource-leveling’’ feature of a computer-based scheduling tool. In
practice, this function is the project management equivalent of a food
processor: Your project will usually be chopped, sliced, and diced
beyond recognition. Before you try this at home, make sure you have a
backup version of your plans.) Completely resolving resource overcom-
mitment problems this way is unusual, but it may mitigate some of them.
It may also be possible to remove some problems by reconsidering
how the work is to be done. There may be options for automating or
otherwise shifting the type and amount of work needed for some con-
strained activities. If so, evaluate any trade-offs and shift your plans as
appropriate. You also may be able to come up with different methods
or improved processes for some work that could relieve some of your
problems. Test that the resources needed for each activity where you
have an issue are indeed necessary.
For each resource stack-up problem you detect, consider all the
activities that contribute to it. Evaluate each for both importance and
urgency, and use this data to rank order the work from most to least
critical. Ask your contributors about the relative priority of other work
outside the project they are responsible for to explore potential adjust-
ments in their schedules. If some of the work causing your resource
problems is not urgent, reschedule it. If it’s unnecessary, drop it.
For all of your remaining resource conflicts, document the magni-
tude of your problem, clearly showing the difference between what you
need and what you have. Explore possible options for resolution with
other managers who are involved, escalating the discussion to include
stakeholders and decision makers where necessary. Work to ensure that
the assignments that people carry are the most appropriate for the over-
all organization.
If issues remain, approach your sponsor with your data to discuss
possible options for alternative staffing. Discuss the possibilities of add-
ing additional full- or part-time staff, outsourced contract help, or other
staffing changes. If this is not feasible, have alternatives available to
explore, including a variant schedule showing a credible timeline based
on your committed resources, and a description of the project scope
that could be achieved in the time available using available staff. (You
will find more on this topic in Problem 78.) Use your planning data to
negotiate with your sponsor, and work together to adjust the project
objective as necessary to set a credible, realistic project baseline.

Planning Topic
61. How can I minimize the impact of
scarce, specialized expertise I need for
my project?
This problem is a special case of the resource overcommitment problem
explored in Problem 60. Dealing with it includes the tactics discussed
there, with some additional emphasis on risk management.
Identifying Unique Resource Issues
When analyzing the knowledge, skills, and aptitudes you need to com-
plete your work successfully, take particular notice of any that are
unusual or rare in your organization. If any of the critical skills needed
for your project are completely unavailable, escalate the matter to your
sponsor or management to get guidance on how to proceed.
If you need skills that are available but scarce, analyze their poten-
tial for impact on your project. Unusual skills tend to be costly to retain,
so most organizations manage them ‘‘lean.’’ This results in having barely
enough capacity for ‘‘normal’’ operations, which leads to frequent queu-
ing and delays in access. Subject matter experts for architecture, test-
ing, specialized design, or any other area needed for a particular part of
your project will frequently be located in centrally managed functional
groups and shared by many projects. In many organizations it is very
common to get to the start date for an activity involving one of these
specialists, and then have to wait in line until the projects ahead of you
are completed.
In addition to the potential for delay, you must consider that having
appropriately skilled staff today is no guarantee that they will still be
available when you need them. Losing special expertise does happen,
through resignation, illness, and other means, and replacing them may
take considerable time (and effort).
As part of your risk identification, list all project activities where
you are dependent on expertise outside your core team over which you
have little control or influence.
155

156 How can I minimize the impact of scarce, specialized expertise?
Considering Alternatives
Not every situation where your initial plans depend on skills outside of
your team need remain outside of your control. As you plan your work,
look for options.
You could make developing some of the skills you need within your
team part of your project. Developing new skills will make your team
more robust and self-reliant, and it can be very motivating for contribu-
tors who have an interest in learning them and gaining experience. If
this requires training, account for the expense in your project cost esti-
mates and the time in your duration estimates. Mentoring by the exist-
ing experts and self-study are also options, but even if no formal training
will be necessary you’ll still need to adjust your timing estimates to
account for learning curve issues.
Outside expertise could be an option when the specialists in your own
organization are fully booked. If so, start the search and contracting pro-
cesses and build the required time and contract costs into your plans.
In other cases, you may be able to buy a project component suitable
for your project deliverable instead of making it and relying on special-
ized expertise. If this is viable, replan the work and adjust your esti-
mates accordingly.
There may be other options available. Consider any reasonable tac-
tics that could reduce your reliance on unavailable or potentially unreli-
able staffing.
Managing Resource Scarcity
Anticipate the start of all activities involving specialists, and send them a
reminder a week or two in advance. Ask them to advise you if they foresee
any problems starting on schedule. The more lead time you have for deal-
ing with issues, the more options you will have for resolving them.
If your project has high priority, use it to minimize your queuing
problems. If you are waiting for a resource behind a less urgent project,
use your priority to better align the queue with the organization’s needs.
If your project has a lower priority, manage stakeholder expectations
accordingly and keep your exposures and risk visible. Do not use ‘‘best-
case’’ estimates for work having significant resource dependencies
where you lack control and influence. When estimating durations,
account for potential subject matter expert timing delays caused by
access problems. Integrate ‘‘unique resource’’ risks into your risk
assessment and response planning, and set a realistic project baseline
including adequate timing and budget reserves.

Planning Topic
62. What is the best approach for
balancing resources across several
projects?
This is an issue that can occur both with large programs and with small
projects. In large programs, balancing resources is necessary when
staffing is shared among the linked projects that make up the program.
However, the most significant issues for projects in a program tend to
relate to their linked scoping, so overlapping resources are generally
not the biggest issue for programs.
Resource stack-up conflicts are much more common for small proj-
ects, usually groups of small projects led by project leaders who staff
them by drawing on a pool of common contributors. The only significant
connection between these projects will be their shared resources; they
are otherwise completely independent. Resolving resource conflicts
relies on planning each project, analyzing the overall resource profile,
and adjusting the plans and expectations as required.
Planning Each Project
When project leaders are faced with four (or ten, or dozens of) projects,
they might make the erroneous assumption that planning is a luxury
they can’t afford. If all of the projects are sufficiently trivial and there
are not too many, they might even get away with this—for a little while.
Eventually, though, it will catch up with them. Inadequate planning will
eventually cause things to crash and burn.
The level of formality need not be extreme; fast-track planning
(explored in Problem 8) may prove sufficient. Your goals for planning
are to determine and list the work needed and to develop a credible
roadmap that reflects both your timing objectives and your resource
constraints.
Armed with a sense of the staffing requirements for each project,
you are prepared to tackle the aggregated resource stack-up for all of
them together. Start by checking your own workload. Test whether your
communication, coordination, and leadership duties for all your proj-
ects are realistic. In general, you should plan to spend about 10 percent
157

158 What is the best approach for balancing resources?
of your time dealing with each full-time contributor you are working
with, but when managing several projects you may need to allocate
more. Although you can probably manage a couple small projects, per-
haps even four, taking on more than six will probably drive you crazy
no matter how trivial they appear to be. If there seems to be enough of
you to go around, begin to analyze the available capacity of your com-
munity of contributors. Document all significant instances of overcom-
mitment that you find.
Making Adjustments
Explore options for resolving resource shortfall issues using a process
similar to that discussed in Problem 60 for dealing with insufficient
resources in a single project. Begin your process by seeking any open-
ings for rescheduling work to take advantage of opportunities where
you detect any extra staffing capacity. Shift the timing of your work to
exploit any overcapacity wherever possible. Also seek to better balance
the workload overall with additional activity timing shifts in the various
projects.
Continue your analysis by reviewing the relative priority of each
project. In general, you will want to allocate and protect the resources
assigned to the most important projects, slowing (or deferring alto-
gether) those with lower perceived value or urgency. If all the projects
are important, document your resource issues and approach your spon-
sor and stakeholders to discuss getting additional staff, funding, or
whatever resources you require to deal with your constraint.
If you are unable to gain access to sufficient resources, begin to
adjust your stakeholders’ expectations to align with what can realisti-
cally be accomplished using the resources you do have. Before you for-
mally commit to schedules for each of your projects, ensure that all the
baselines are realistic and consistent with your committed staffing and
resource capacity.

Planning Topic
63. How can I minimize potential late-
project testing failures and deliverable
evaluation issues?
The best time to deal with scope verification and stakeholder approval
issues is when you are setting the project scope in the first place. Man-
aging customer expectations is discussed in Problem 22, where the
importance of clarifying performance requirements and approval crite-
ria is emphasized. Other important ideas for avoiding late-project prob-
lems include thorough planning, frequent interim evaluations, and
scrupulous management of changes.
Planning Thoroughly for Testing
As your plans and final requirement definitions come together, include
well-defined activities for gaining final approval. Identify the contribu-
tors who will own the testing and evaluation tasks at project close, and
work with them to define, estimate, and schedule them. Allow adequate
time for testing, evaluation, and defect correction in your estimates—
assuming that all tests will go smoothly only works when you are very,
very lucky. Review the performance and acceptance criteria with your
stakeholders, and make adjustments to your plans as appropriate fol-
lowing any updates you agree to.
Identify scoping risks in your planning. If portions of your scoping
are unclear or seem likely to change, work to stabilize them. If there
are significant scoping issues that you are unable to resolve, consider a
‘‘cyclic’’ or ‘‘agile’’ approach for your project life cycle to allow you to
incrementally deliver functionality and make adjustments and course
corrections as you proceed.
Whether you adopt a step-by-step approach to your work or not,
plan for periodic check-ins with your users, customers, and stakehold-
ers during your project. Include scheduled reviews of proofs-of-concept,
prototypes, pilots, or other interim deliverables. Encourage participa-
tion by people who will be responsible for final approval in inspections,
component tests, and other early evaluations. The feedback from these
159

160 Minimizing late-project testing failures and deliverable evaluation issues
activities can provide you with an early warning system for potential
later (and more serious) problems.
Also, review the late-project experiences of other similar work as
part of your planning. If the retrospective analyses of recently com-
pleted projects show systemic closure issues, investigate the problems
to uncover the root causes. Pursue any promising opportunities you
discover that could improve your testing processes.
Managing Changes
Project changes are a major source of late-project heartache. Insuffi-
cient analysis of proposed changes—or even worse, no analysis at all—
can create big testing problems. Even seemingly benign, ‘‘minor’’
changes may result in severe unintended consequences late in the
project.
To minimize this, adopt a sufficiently formal process for managing
scope changes, and establish a default of ‘‘reject’’ for all changes pro-
posed lacking a compelling business justification. For every change
being seriously considered, evaluate potential consequences for testing.
Involve the appropriate stakeholders in decisions to accept or reject
any change where there could be a significant impact on testing or
acceptance criteria. For changes that are adopted, revalidate any modi-
fied testing and evaluation criteria with your users, customers, and
stakeholders, and update all relevant project documentation.

Planning Topic
64. How do I anticipate and minimize
project staff turnover?
Project staffing is rarely static. The more stable it is, though, the easier
it will be to finish your project. Holding on to staff involves both moni-
toring for and proactively managing potential turnover.
Monitoring for Signs of Restlessness
Some types of projects rarely lose people, and other types lose them
all the time. Consider what is normal for your organization and plan
accordingly. If your projects are short, your organization is stable, and
people appear happy, you shouldn’t need to worry a great deal about
turnover. If your project is lengthy or there has recently been a lot of
organizational churn, however, it’s a good idea to keep your eyes open
for potential problems.
As your project progresses, monitor your team’s behavior. Individu-
als often behave poorly before announcing that they are leaving, so bad
attitudes are often a good early warning sign of imminent turnover. If
one of your contributors is resistant to your efforts to establish relation-
ships and build trust, be wary. Lack of enthusiasm in planning and other
collaborative work is also a bad sign. Chronic lateness to meetings and
missing commitments are other symptoms of disengagement. In extreme
cases of bad behavior, conflicts erupt, leading to poor cooperation,
arguments, and fights. Ironically, the opposite of this, ready agreement
to anything, is also potentially problematic. This can signal a loss of
interest in what is going on; ideally your project team members should
always be willing to provide serious feedback in discussions, including
at least some constructive criticism.
People preparing to leave are often actively job hunting. Visible
signs of this include frequent, poorly explained absences; leaving copies
of their resume accidentally on copiers or shared printers; and dressing
more nicely than usual. Although none of this may prove with any cer-
tainty that one of your team members is planning to quit soon, bad atti-
tudes and apparent job hunting are always worth investigating.
161

162 How do I anticipate and minimize project staff turnover?
Managing Proactively
If you detect signs of potential turnover, set up a meeting with the indi-
viduals involved. You may not want to confront the issue of their possi-
ble resignation directly, but telltale behaviors you have noticed can
provide you with a useful place to start. If there are problems such as
lateness, lack of follow-through on project commitments, or inappropri-
ate absenteeism, ask about them. Inquire if there are particular things
that are annoying your team member that could be causing these behav-
iors.
If you are concerned but there is nothing overt happening, a little
‘‘management by wandering around’’ (discussed in Problem 44) is a
great way to explore if your team members are unhappy, and if they are,
to dig into whatever is bothering them. Ask about anything that your
contributors would like to see changed, and request suggestions for
how these things might be improved. What you discover may be under
your control. If so, consider changing it. Even if it is not something you
can do anything about directly, you may be able to influence others, or
at least provide feedback about the situation within your organization.
Sometimes simply discussing situations that are bothering people will
go a long way toward lowering the temperature.
If you discover that you have a team member who is about to resign
and his or her continued involvement is particularly important, there
may be actions you can take to protect your project. If you request it,
some contributors may agree to postpone their resignation in order to
avoid leaving you and the rest of your team in the lurch. In some circum-
stances, there may be something you could offer in exchange for their
continued participation through the end of the project, or at least
through its current phase. With the approval from your sponsor or man-
agement, you may even be able to arrange for special compensation or
other tangible reward for staying longer.
If you reach the conclusion that losing someone is inevitable, be
proactive in preparing to replace the person. Tips for adding staff to
your project are discussed in Problem 59.

Execution Topic
PART 5: EXECUTION
65. How can I avoid having too many
meetings?
One of the top complaints about projects is ‘‘too many meetings.’’ Deal-
ing with this effectively involves structuring meetings well and eliminat-
ing unnecessary meetings.
Building Better Meetings
People hate meetings less when they are more useful and shorter. Every
meeting should have a point and be only as long as necessary to achieve
its stated goals.
As project leader, you will need two kinds of regular meetings: team
meetings including everyone and one-on-one meetings with each con-
tributor. For most projects, both types will be scheduled weekly. The
primary objectives for these meetings are general communications and
team building, and for these neither needs to be lengthy.
A one-hour team meeting should be the maximum. Test the theory
that your team needs to meet every week by skipping a week. If that works,
reschedule the meeting to be biweekly. (It’s a bad idea to meet much less
than this, though. People may start to forget who is on the team.)
Half-hour, weekly one-on-one meetings with your team members are
generally sufficient, especially if you supplement them with other fre-
quent discussions and conversations. Weekly contact with the people
on your team is really about the minimum for keeping them engaged
and helping them remember that they are on your project. If your team
is global, schedule each one-on-one phone meeting during your contrib-
utor’s workday, not necessarily during yours.
Other project meetings will be necessary but should be rare. Spe-
cial-purpose meetings such as project start-up workshops can be longer,
but most other specific meetings can be kept to an hour or less. Invite
only the people necessary to special meetings, and confirm that they
plan to attend in advance.
When practical, consider hijacking your regular team meeting
agenda for some of your special-purpose meetings. Dispense with your
normal team business quickly and move on to the particular topics. A
primary purpose for a regular team meeting is to keep your staff con-
nected, and for this any meaningful topic will suffice.
Strive for brevity. Encourage short meetings by moving topics not
163

164 How can I avoid having too many meetings?
requiring live discussion to e-mail or other communications. (Especially
status collection—no one needs to waste 15 minutes listening to endless
variations of ‘‘Things are fine.’’) Set a formal agenda for every meeting
that involves more than two people, and allocate time to each item you
list. If your topic list is insufficient to fill the scheduled time, plan to end
early. Distribute pre-meeting documents for review when possible to
minimize the time you need to spend setting the context for discussion.
To encourage meetings to end on time, and to avoid fragmenting pro-
ductivity, schedule meetings to end at mealtime or at the end of the day.
Your meetings are not just for you. To be effective they must be for
everyone. When inviting people to a meeting, look at the situation from
their perspective. Do they need to be there? If not, don’t invite them. Do
they need to attend the whole meeting? If they don’t, use your agenda
to invite them to only the portions they need to see and manage the
agenda so that when they join you will be on that topic. An alternative
is to schedule more meetings, but invite only the people necessary to
each. Although you will have more meetings, they will be shorter, and
everyone else will have fewer and shorter meetings to deal with. Fine-
tuning your meeting schedule to accomplish this depends on getting
reliable commitments to attend from all who must be there, so confirm
attendance with each person involved prior to the meeting.
Running Better Meetings
Effective meetings are well run. Start your meetings on time, and never
be late to your own meetings. End early whenever possible, and don’t
end late. Use a ‘‘bucket list’’ to capture off-topic issues that arise, and
don’t let them lead discussions astray. Pick up any truly urgent topics
listed at the end of the meeting if absolutely necessary (and if time
allows), but follow up on all items listed after the meeting or on the
agenda for a future meeting.
Set ground rules for regular meetings to establish norms for behav-
ior and to set expectations that participants will not be wasting their
time. After each meeting, take responsibility for summarizing all deci-
sions and outcomes, and document and follow up on all action items
generated. (Managing action items is covered in Problem 66.)
Dumping Unneeded Meetings
Before scheduling any meeting, consider if there might be a better way
to accomplish the objectives. If there is, abort the meeting. Review all
your current meetings and cancel all that are not necessary.

Execution Topic
66. How can I ensure owner follow-
through on project tasks and action
items?
Getting things done starts with securing a meaningful commitment from
an individual who will take responsibility for the work. Ideas for this
are explored in Problem 48. Once you have agreement from an owner,
effective execution depends on follow-through and closure of the proj-
ect work, and for this you need to be proactive.
Following Up on Assignments
As your project proceeds, all scheduled work must commence, be
attended to, and then be completed according to plan to keep the proj-
ect on schedule. You must also drive the action items and other tasks
found along the way to closure. To maximize the likelihood of all of this,
you need to stay ahead of the game through reminders, inquiries during
informal communications, and other means.
Status collection is central to this. In your weekly (or other periodic)
requests for project status, list all the items of interest. In the status
request you send to each contributor, include all of his or her assigned
activities and action items that are coming due (plus any that are cur-
rently overdue) with relevant expected completion dates. Strive for
meaningful interim status for any ongoing long-duration activities, not
just ‘‘I’m doing fine.’’ Also list any work scheduled to begin in the next
two weeks, along with the expected start dates.
Be gentle but persistent regarding attention to due dates, especially
early in your project. All due dates matter, and if you allow them to slip
for early work it creates two potential problems. Time lost can never be
recovered, so the few days you might put yourself behind in the first
weeks of your project will ultimately result in either forced compression
and extra stress for later work or a late project. The second problem is
even more insidious. If you fail to manage due dates scrupulously at the
beginning of your project, people will assume that they don’t matter and
will tend to pay little attention to them through the rest of the project.
If a task or an action item is overdue, or in serious danger of becom-
165

166 Ensuring owner follow-through on project tasks and action items
ing overdue, approach the owner and explain the consequences of slip-
page. Discuss the impact it will have on the project, but focus on
adverse effects that the individual particularly cares about.
Making Status Visible
Keep a list of open action items online as part of your project manage-
ment information system (PMIS), and include for each a description,
date opened, owner, current status, and due date. Quickly review action
items in team meetings, focusing on those that are overdue or will be
due before your next meeting. Call the owners of action items and proj-
ect activities the day before they are due for a quick check-in, and as a
reminder of the deadline.
If you are diligent and proactive, you can learn of problems and
issues earlier and have more time and options for resolving them. If some-
thing must slip—because of a risk that is realized, an external depen-
dency, an unexpected complexity, or any other reason—begin research-
ing your options as soon as you learn of the problem. Get to work with
your contributors and any others involved to revise your plans
promptly. If you are considering changes that could affect work sched-
uled later in the project, involve the owners of that work in your replan-
ning efforts too. Before committing to any plan adjustments, verify
acceptance by everyone who will be affected. When you have deter-
mined what to do, update any relevant project documents and commu-
nicate the impact of the revisions to all stakeholders who need to know.
Include status of all current work in your weekly project reporting,
including open action items. Make people aware that your reports will
flag endangered items yellow and late items red, and use these flags
consistently even when the activity owners are your managers. (But
always warn everyone a few days in advance that this is coming, espe-
cially your managers, before doing it.) Circulate your status reports to
all stakeholders who need to be informed, and promote the status of
any significant late deliverables to the summary at the top of your writ-
ten report.
As a last resort, escalate problems with overdue deadlines. Work
with your sponsor, your management, your contributors’ management,
and others in authority to get things that are stalled back on track. Esca-
lation is the thermonuclear option for dealing with project problems,
because there will nearly always be permanent fallout and damaged
relationships in its wake. If your project is important and there are no
other viable options, however, escalation may be your only choice.

Ensuring owner follow-through on project tasks and action items 167
Closing Out Assignments
When the work is completed, update your documents to reflect it. When
closed, mark action items ‘‘Done’’ in your PMIS and note their comple-
tion in your weekly status reporting. Update your tracking schedule to
reflect closed tasks, and if the work was not completed on schedule—
early or late—inform all of your team members who are affected.

Execution Topic
67. How do I keep track of project
details without things falling through
the cracks?
Project leaders are always busy, so remaining on top of what is happen-
ing requires discipline and effective processes.
Tracking Dogmatically
Much of the job of a good project leader is effective communication. You
must manage both inbound and outbound communications to ensure
that you know what is going on and that all contributors and stakehold-
ers have the information they need to do their jobs. Effective project
monitoring starts with allocating sufficient time on your own calendar
for it, so avoid overloading yourself with other duties that could make it
impossible to keep up with your project.
Effective tracking is easiest when the granularity of the work is con-
sistent with your communication and reporting cycles. A work break-
down structure containing work at the lowest level having two- to
twenty-day durations—averaging about two weeks—will ensure that
you will learn of most problems with sufficient lead time to deal with
them. Following this guideline also avoids the unnecessary clutter of
having to status hundreds of excessively short activities. As unplanned
work is uncovered during your project, add it to your breakdown, and
schedule and monitor that too.
As discussed in Problem 66, remaining proactive will provide
needed advanced warning for problems, so always collect status
updates from your contributors on work that is pending in addition to
what is coming due. Gathering status on work scheduled to begin soon
will permit you to better focus your overall efforts on keeping the proj-
ect on track.
Being proactive also requires effective informal communications. In
your conversations with your team members, ask what they are con-
cerned about to uncover upcoming problems. Also discuss any current
status issues, and explore any barriers, missing inputs, or other potential
difficulties. Overall, strive to maintain good relationships and trust with
168

How do I keep track of project details without things falling through the cracks? 169
all on your team, so that they will feel comfortable sharing what is really
going on as it happens, even when it’s not particularly good news.
Setting Up Effective Status Collection Processes
At the beginning of each project, set the frequency (generally weekly is
best) that you will use for formal status collection. Get buy-in and agree-
ment from each of your contributors to provide status on that basis,
and start collection right from the start. Collect status every cycle, even
when you are busy. In fact, it’s especially important to collect status on
a regular basis when things are busy and stressed. If you allow a prob-
lem in one area to distract you from what is happening in the rest of
your project, other issues will arise without your knowledge and may
well spin out of control before you even become aware of them.
If you are unable to collect status from a particular contributor, be
persistent and follow up on the telephone, in person, or by other means.
If you encounter chronic data collection problems, escalate as neces-
sary to reinforce your need for progress information, and work to re-
establish regular two-way status communication. When collecting proj-
ect activity status, verify its accuracy using conversations and by partic-
ipating in tests, evaluations, inspections, or other deliverable analysis.
Scheduling Periodic Reviews
Although weekly status collection is adequate for day-to-day project
monitoring, you’ll also need planning reviews to stay on top of projects
with complicated life cycles or lengthy durations. Schedule reviews at
life-cycle transitions, major project milestones, fiscal boundaries, or
other times when a thorough reexamination of the project will be useful.
For longer projects or programs, hold reviews at least every six months
to stay within a realistic planning horizon. Use your reviews to update
the activity lists, dependencies, and estimates, and to incorporate all
newly discovered work into your plans. Update your requirements,
risks, and other project information, modifying your project plans
accordingly. Use the results of your reviews to get approval to proceed
from your sponsor. Adjust your tracking and monitoring processes as
appropriate to reflect any process improvements or other changes that
result from your reviews.
If the review reveals the need for major changes, re-baseline your
project with your sponsor and work with your stakeholders to manage
their expectations.

Execution Topic
68. How can I avoid having contributors
game their status metrics?
Reliable project measurement is fundamental to effective tracking and
monitoring. If the information you collect is flawed, you won’t know
what is happening, so you must establish an environment that encour-
ages honest reporting and set up measures that align well with project
objectives.
Establishing a Safe Reporting Environment
‘‘Gaming’’ of metrics is what happens when people find ways to avoid
providing information that reflects what is actually happening. When
project metrics are gamed, you are working with flawed data. The most
common root causes for inaccurate metrics relate to how they are used.
When metrics are primarily used to detect and solve problems, people
support them and cooperate. When metrics are used to find fault and
punish, people provide them only grudgingly, and do whatever they can
to provide results that demonstrate no problems—whether that’s true
or not. Gathering valid, useful information starts with a meaningful com-
mitment on your part to use the measures for process improvement,
good decision making, and project problem solving. If there is even a
suspicion that data gathered will be used to criticize, punish, or even
embarrass people, those responsible for reporting them will find a way
to game the measures and disguise what is going on.
If you can ensure that all adverse status information that you collect
will only be used to identify issues and focus attention and resources on
their resolution, gaming of metrics will be rare. You must be scrupulous
about maintaining this throughout your project, though. Even one coun-
terexample can result in substantial mistrust and the prospect of largely
unreliable future status.
One of the most effective means of sustaining open and honest
status metric reporting is to involve the team members who will do the
measurement in defining what needs to be measured and reported. Get-
ting buy-in for measures where everyone is involved is a lot more
straightforward than for the measures that are inflicted from outside or
above. It also helps to approach each person involved, discuss the pur-
170

How can I avoid having contributors game their status metrics? 171
pose and importance of the measures, and ask for him or her to agree
to report the information on time and accurately to the best of his or
her ability. People who have looked you in the eye and committed to not
game their metrics are far less likely to provide erroneous information.
Also strive to verify accuracy and precision. Do what you can to
ensure that the metrics you use may be easily confirmed, and at least
spot-check them regularly to ensure their accuracy. If you detect a prob-
lem, follow up promptly and work with those collecting the data to
ensure accurate future data. If you need to confront contributors regard-
ing a measurement issue, do it one-on-one, and let them participate in
any recommendations for fixing the problem.
Another important data reliability factor relates to how visible the
metrics will be. If you are collecting potentially personal information,
commit to keeping it private. Examples of such data include adverse
performance or attendance data that reveals information that the mem-
bers of your team would prefer not be public. If you need to collect such
information, never report it except in aggregate for the whole team so
that it will not be obvious who is involved—or better yet, don’t report it
publically at all. Ensure that any follow-up discussion regarding private
information is strictly between you and the person involved. (There is
one big exception to this, however. If you find yourself wandering into
potentially dangerous legal territory, get help. When you become aware
of anything that crosses the line into inappropriate, unethical, illegal, or
other behavior that violates your organizational policies, immediately
involve your management, your human resources specialists, or others
who know what they are doing. Let the pros take this over; this is not
your job as a project leader.)
Aligning Metrics and Goals
Useful information also depends on clear definition. Thoroughly describe
each project metric you intend to collect so that each person responsi-
ble for collecting it knows exactly what is to be measured, and how.
Metric definitions include what you are measuring, how it is to be used,
how it is to be derived, frequency, units for reporting, and other factors.
If several people are asked to provide the same metric and there is a
good definition, you can expect consistent measures, not a wide range
of results.
Metrics work best when they directly relate to stated goals and
expected behaviors. Before adding any particular metric to your status
collection and reporting, determine how it relates to the ultimate suc-

172 How can I avoid having contributors game their status metrics?
cess of your project. If a specific metric has only a tenuous connection
to what you are trying to accomplish, drop it.
You will also get better results when your metrics are in balance.
For example, having only a metric for speed or only a metric for accu-
racy won’t help your project very much. If you measure only speed,
your deliverable might work poorly. If you measure only accuracy, you
may never finish. Metrics for both used together, though, will create
tension and provide the balance your project needs to deal with trade-
offs and best achieve your goals.

Execution Topic
69. What are the best ways to
communicate project status?
Project status–reporting problems fall into two categories: There’s too
much of it, or there’s too little. Striking an appropriate balance is not
difficult, but it does take a bit of effort.
Reporting Regular Status
Your main objective in project status reporting is to provide the infor-
mation people need while keeping your communications overhead
under control. If you provide reports to lots of people, the overhead can
be overwhelming. It’s best to craft a format that can be easily edited to
serve multiple audiences, so you do not get stuck writing a dozen differ-
ent reports every week. One technique that serves this end is to use the
‘‘inverted pyramid’’ style of writing employed by newspapers. The most
relevant and important information is up front, in the headlines and first
paragraph or two. Additional information may follow, but each succeed-
ing portion is less important than what came before.
Applying this idea to a weekly (or other periodic) project status
report is not difficult. Start each report with a set of ‘‘headlines,’’ three
to five bullets that summarize what is most important about your proj-
ect since your last status report. Include in this executive summary any
significant accomplishments, issues you are working on, and major work
that’s pending. Use your summary to name contributors with note-
worthy recent accomplishments to recognize and keep them motivated.
Follow your summary with more detailed information on activities,
timing, costs, issues, action items, and other project details, sequenced
according to relative importance. For your team, the entire report will
probably be relevant. For project leaders of related projects and some
of your stakeholders, the first half may be of interest. For your sponsor,
your management, and the rest of your stakeholders, it could be that
only the executive summary will be necessary. Starting the report with a
clear summary helps everyone understand what’s most important, and
customizing by chopping off trailing portions of the report lets you tailor
it for different readers without killing yourself.
The leading summary is most important, so work to focus it on the
173

174 What are the best ways to communicate project status?
most relevant information and choose your words carefully to convey
the message you need people to hear. The remainder of the report mat-
ters as well, but it will always have a lot less impact than the first few
lines (and that’s all that many people will read anyway). Especially in
the summary and other up-front sections, exclude trivia and information
that is well known or self-evident. Report on the things that matter most
to the community surrounding your project, including details on any
changes to scope, risks, issues, activities, or any other relevant project
information.
The worst status reports say little more than ‘‘We are doing okay,’’
and provide no analysis or specific details. Although this kind of report-
ing may be tempting to harried project leaders with too much to do,
it will cause your sponsor and stakeholders to lose confidence. It also
communicates to your team that you don’t care about details, and they
will soon stop providing any themselves. If you expect your contributors
to supply accurate timely status, you’ll need to set an example by doing
the same, and include what they provide so each team member can see
that their inputs are being used.
Also not useful are reports created by lazy project leaders who col-
lect status write-ups from each contributor and simply concatenate
them in random order into a humongous string of text with no organiza-
tion. Although this style of report may include all relevant information,
somewhere, no one will be able to find it and few will even try.
You also need to keep your project management information system
current. Drop a copy of your periodic project status report where peo-
ple can find it along with earlier versions. Use the status you collect to
update lists, action items, tracking schedules, and other planning docu-
ments in your archive, so contributors can find and use up-to-date infor-
mation to guide their work.
Preparing Special Reports
In addition to regular weekly reporting, you will probably need to pre-
pare less frequent, high-level reports. This sort of reporting is often
coincident with project reviews, life-cycle phase transitions, fiscal
period ends, or specific management requests. These reports tend to
take a longer view, and focus on both what has been accomplished to
date and what is planned for the future. Although there may be less
detail in these reports, the audience for such reporting (and often a
formal presentation) will be your management, sponsor, and key stake-
holders. You will need to be clear and crisp, and focus on the positives.

What are the best ways to communicate project status? 175
You may get few opportunities to communicate what you are doing and
how you are progressing to your management, so take full advantage of
these reports to build continuing support and interest in your project.
Another special case is your final project report. As your project
wraps up, document what your overall project has accomplished. Sum-
marize your results, and emphasize the goals you met and the value and
benefits you have delivered. Include specifics on people and teams who
did the work, and recognize their contributions. A final report is also
a great opportunity to raise issues that emerged in your post-project
retrospective analysis—using your lessons learned to propose changes
and improvements that will make future projects more successful.

Execution Topic
70. How can I manage my project
successfully despite high-priority
interruptions?
In a perfect world, projects would exist in their own hermetically sealed
environment and things could proceed without interruption through to
a successful closure. In the real world, stuff happens and we need to
deal with it through prioritization, and when necessary, replanning.
Prioritizing Work
When a project leader gets a request to work on something outside the
project, there are several possibilities. To determine which will be most
appropriate, begin by assessing relative priorities. If your project is stra-
tegic and considered vital by your management, you might get away
with ‘‘Sorry, I can’t be spared to help you,’’ or ‘‘I’d love to help you later,
but not right now.’’ You will likely need to deal with interruptions that
appear to be more important than your project, though.
Before abandoning your project, at least get a sense of how much
time and effort the request will require, and inform your sponsor and
key stakeholders about any consequences of your absence. This may
shift the relative priorities, and in some cases your sponsor’s reaction
might even result in the person with the hot request deciding to seek
help elsewhere.
Managing Your Absence
You’ll need to manage around any interruptions that do take you away
from your project. If the amount of time and effort needed from you is
small, this may have only minor consequences for your project. Good
project leaders strive not to overbook their own time, so you probably
have a small amount of reserve to work with. Any slack time you manage
to retain in your schedule is there for dealing with risks and other situa-
tions that arise in your own project, but for small requests this could
potentially be diverted to help out externally. Also, you probably have
176

How can I manage my project successfully despite high-priority interruptions? 177
at least one person on your team who can pick up critical project leader-
ship responsibilities in your absence—usually the same contributor you
would rely upon when you are ill, on vacation, or otherwise unavailable.
The reality is that for small high-priority requests, the answer for most
of us will not be entirely satisfactory, but it boils down to ‘‘Deal with it.’’
For requests that are bigger, representing significantly more than a
week or so of your time, there will almost certainly be a noticeable
impact on your project. In these cases, document the specific conse-
quences for your project, and discuss them with your sponsor. If a suit-
able project leader can be identified to fill in for you while you are
focused on outside work, arrange to make the job for your temporary
replacement as seamless as possible.
If no one is available to substitute for you and your absence will
substantially affect your project, use your data to adjust your stake-
holder expectations to be in line with what can realistically be delivered.
Replan your project to reflect your temporary absence, and get approval
to reset your project baseline.

Execution Topic
71. What are the best project
management communication techniques
for remote contributors?
Effective communication with remote team members starts with estab-
lishing relationships and trust, as discussed in Problem 39. Building on
a solid teamwork foundation, you can draw from a variety of useful tech-
niques and ideas.
Communicating Informally
Maintaining effective teamwork starts with your one-on-one relationship
with each member of your team. Take full advantage of all opportunities
to visit face-to-face with all of your remote contributors, whether you
travel to visit them or you bring them to visit with you. This takes time
and costs money, but the alternative—disconnection and potential con-
flicts—will nearly always be worse. If possible, find a way to meet in
person with each member of your team at least twice per year.
Also take advantage when others travel. Discover contacts that you
have in common and set up short meetings involving them to reinforce
your connections when they are visiting a site where you have a team
member (or if they work with someone on your team, to meet with you
when in town). Travelers are also a good, personal way to deliver small
things to distant contributors, such as small project rewards, team
T-shirts, and the like.
Practice ‘‘tele-MBWA,’’ using communications tools to ‘‘manage by
wandering around’’ with those who are not nearby. Call people who are
far away a few times a month ‘‘just to talk,’’ without any formal agenda
or question in mind. You will find more discussion on MBWA and other
informal communications with team members who are far away in Prob-
lem 44.
Informal communications also include e-mail and other electronic
messaging. Take advantage of opportunities to share pictures and infor-
mation of interest that has nothing to do with your project. Strive to
keep in contact, and work to make people who are far away feel they are
part of your team.
178

What are the best communication techniques for remote contributors? 179
Communicating Formally
Between the opportunities that you have to interact face-to-face, take
full advantage of all available communications technologies. Make use
of audio- and videoconferencing as frequently as practical, and justify
using the best capabilities you can find. There is more on the topic of
tools for global communications and networking in Problems 72 and 96.
Schedule time to interact one-on-one at least weekly with each member
of your project team. You can significantly increase the effectiveness of
these calls if you schedule them during your contributor’s normal work-
day, even if this is not convenient for you. Formal meetings are another
aspect of projects that can work either for or against you with remote
contributors. Make all your project meetings as efficient and short as
practical, and ensure that the timing is as acceptable to everyone as
possible. Meet early in the morning or late in the evening, at least part
of the time, to fairly spread the pain and loss of sleep around to all.
Make remote participation in your meetings easy for everyone, provid-
ing network connections or pre-meeting distribution of all visual materi-
als to be discussed. Be sensitive to the length of meetings where people
are participating via telephone where much more than an hour will
likely result in loss of interest and involvement.
Set up your weekly status requests to make responding to them as
easy as possible for your distant team members. If you are dealing with
several native languages, ensure that written information you send out
is clearly and unambiguously understood by all. If necessary, provide
translations of reports and important project documents.
Follow up any telephone calls and meetings where you have dis-
cussed complex matters with an e-mail summarizing what was covered
so your remote team members can review it in detail. Also follow up
complex documents that you distribute with a telephone call so you can
discuss the material and allow your remote staff to ask any questions.
By and large, strive to ‘‘overcommunicate.’’ With remote team members
there is a natural inclination toward ‘‘out of sight, out of mind,’’ so proj-
ect leaders rarely invest enough time with distant contributors. Doing
more than you think is necessary might just be barely enough.

Execution Topic
72. How do I establish effective global
communications? What metrics can I use
to track communications?
Some of the purposes served by remote communications are explored
in Problem 71, along with some ideas for making them more effective.
Discussion of project communications tools can be found in Problem 96.
This problem focuses primarily on how best to communicate globally.
Using Telecommunications
There are many tools for audio teleconferencing, and most of us these
days use them extensively and relatively well. If you plan to use speaker-
phone equipment, check that it is in good working order and is of high
enough quality to ensure that those who are not in the same room with
the speakerphone will be able to understand everything that’s said,
even from the corners of the room far from the microphones. There
may also be sound quality issues when including mobile phone or ‘‘Web
phone’’ users in teleconferences. If background noise or distortion
causes problems, work to ensure more reliable connections for affected
participants at future meetings.
Also take advantage of Web-enabled computer display sharing for
remote meetings. Check all equipment settings to ensure compatibility,
and choose a networking application that’s suitable for your meeting
needs. Use dynamic ‘‘network meeting place’’ software for small meet-
ings, and ‘‘Webinar’’ applications to present to large, distributed groups.
Whatever type of Web-sharing software you use, provide an effective
way for all to negotiate past any relevant security or firewalls.
Videoconferencing is also becoming a lot more popular, and it’s a
great way to share complex information and to show the faces of remote
meeting participants. If you plan to take advantage of video gear or spe-
cial rooms for your meetings, ensure that all the setups are compatible
and that you have budgeted for any ongoing expense associated with
using specialized facilities. In some cases, the inconvenience of coming
to a special room and the complexity of connecting the video setups
180

How do I establish effective global communications? 181
may exceed the value of videoconferencing. If so, consider more conve-
nient audio options along with Web sharing to realize many of the same
advantages. In all cases, use the best and most effective communica-
tions tools that are available to everyone on your team for your meet-
ings.
There are also countless other ways to connect one-on-one to others
these days, starting with various types of instant and text messaging, and
including all the variations of ‘‘social networking.’’ Trendy project leaders
tap into as much of this as their team members desire to (or will toler-
ate), and any of these means can provide powerful support for reinforc-
ing trust and building strong interpersonal relationships. Consider issues
of organizational policy, security, and technological compatibility in
adopting these kinds of dynamic technological communications. If they
meet your organization’s guidelines and help you stay in touch with your
team, take full advantage of them.
Remember that for many of your important project communications
you need to ensure that there is a permanent record. In these cases,
continue to rely on (or at least follow up with) regular e-mail or other
messaging that provides an audit trail.
Setting Up a Global PMIS
Global teams have special requirements for their project management
information system (PMIS). Many considerations for establishing a PMIS
are discussed in Problem 33. As part of your PMIS for a global team,
ensure that you are making plans, issue lists, change logs, and other
project documents fully available around the clock. Set up PMIS access
so that it’s open to all who need it, but secured against those who don’t.
If you have links in your PMIS to information stored in other locations,
check that all of your team members have full access to the other file
shares, Web sites, and any other places referenced by such links. Imple-
menting your PMIS with ‘‘knowledge management’’ software that pro-
vides search capabilities will increase its utility. Such applications can
also improve your control of the PMIS by letting you establish alerts to
advise you when anyone modifies critical project information.
Strive to ensure that all of your team members have acceptable
response time for information access, including those who are far away.
If necessary, consider using synchronized ‘‘mirror’’ sites on distributed
servers to better support your distant staff.

182 How do I establish effective global communications?
Measuring Global Communications
There are many potentially beneficial communications metrics for dis-
tributed team communications. A few that may be most useful include:
g Status responses on first or subsequent requests
g Counts of inbound and outbound messages
g Access statistics for your online PMIS
g Issue aging and counts
g Frequency of requests that you receive to provide information
available online
If you detect data patterns that reveal a lack of two-way communication
or lack of engagement (either by contributor or by location), investigate
why. Work with your team to improve participation.

Execution Topic
73. On fee-for-service projects, how do
I balance customer and organizational
priorities?
When you agree to manage projects on a contract basis, you are signing
up to serve two masters. You may need to walk a tightrope to keep both
your own organization’s management and your paying customer happy.
Managing trade-offs in such situations begins with identifying any lack
of alignment, and then taking action to minimize and manage potential
conflicts.
Understanding Potential Differences
In the bid phase of a fee-for-service project, carefully analyze the cus-
tomer requirements in relationship to your organization’s strategies and
expertise. There are many reasons to decline an opportunity to bid for
work, starting with whether the job is a good fit with what you do well.
After considerations of competence, the next hurdle will generally con-
cern whether the potential project is something that you want to get
involved with. Some ‘‘no bid’’ decisions are based on size—a particular
job may be too big, or perhaps even too small.
Other things to consider include longer-term benefits such as the
potential for follow-on business and the value of the project or customer
relationship for reference purposes. Also think about any aspects of the
potential relationship that may be undesirable for some reason. If there
are obvious differences between the stated core organizational princi-
ples and those of a potential customer, they may be a compelling reason
to pass up the bid opportunity. The oft-quoted principle at Google,
‘‘Don’t be evil,’’ is an example of a core belief that could guide decisions
to embrace some opportunities and to run away screaming from others.
If a project opportunity carries potential conflicts involving issues of
ethics, business values, or even political philosophy, avoiding a con-
tract relationship in the first place is probably your best option. (Not all
such differences may be apparent early in the bidding, contracting, and
initiation phases for the work. Some philosophical conflicts may arise
later, despite your diligent evaluation of the opportunity at hand.)
183

184 How do I balance customer and organizational priorities?
Most other conflicts common in fee-for-service projects come down
to changes and costs. Your best defense for these is to spend sufficient
time analyzing the ‘‘request for proposal’’ to develop the precise under-
standing of the performance and other deliverable requirements you
will need to develop your response. If some feature or aspect of the
desired scope is unclear, follow up to investigate exactly what is needed
before crafting your bid.
For any work you plan to pursue, analyze any potential differences
in priority or other conflicts between your organization and your pro-
spective customer. If you do decide to respond, explicitly deal with
potential conflicts by incorporating language in your proposal. Describe
any specific constraints regarding what processes you plan to use, any
standards you will apply, and any other significant things that you will
or will not do as part of the project. Within your organization, determine
how to price the work to be in line with your assessment of the risks you
will carry, your goals for profit, and any other financial considerations
important to your management.
Negotiating the Contract
Effectively dealing with conflicts later in the project starts with setting
the contract terms. Ensure that the contract includes clear, unambigu-
ous language describing all deliverables, with measurable criteria
regarding acceptance. Also incorporate language describing the process
and consequences of any changes to the project or the deliverable,
including how to document changes, who will approve them, and the
precise impact any accepted changes will have on pricing and other
contract terms. If you included specific exclusions or any other con-
straints in your proposal, see that they are incorporated into the con-
tract. Anything that causes problems later that is not explicitly covered
in the contract will generally be resolved in favor of your customer’s
priorities. If something matters to you and your organization, ensure
that it’s included in the contract that you sign. If you don’t, you may end
up absorbing the consequences later, whether you want to or not.
Managing Conlicts
During a fee-for-service project, the main operating principle tends to
be ‘‘The customer is always right.’’ As your project proceeds, you must

How do I balance customer and organizational priorities? 185
work for a hierarchy of sponsors. For most matters, the dominant voice
will be the customer who engaged you to do the work. The opinions of
your sponsor/manager in your own organization are secondary,
because your customer controls whether you get paid, and that is ulti-
mately your organization’s primary stake in the project.
Whenever conflicts with your customer arise, consult the contract
to see if it offers any support for your position. If the contract terms
clearly support your interpretation, take a firm stand. Let your customer
decide whether to back down or to renegotiate to change the contract
to get what he or she desires.
If your contract offers no help, you will probably need to comply
with your customer’s position. If this means changing what you are
doing, or redoing work you have already completed, your organization
may have to eat the costs and deal with any other consequences this
entails. In general, your top priority throughout your project will be
maintaining your customer’s satisfaction, while managing the expecta-
tions of all your other stakeholders the best you are able.
In some extreme cases, you may encounter conflicts that are suffi-
ciently severe that you’ll consider abandoning the project altogether, or
at least taking a firm position contrary to your customer’s wishes.
Before doing anything overt, discuss the situation with your own man-
agement and clearly consider all the potential negative consequences,
costs, and legal ramifications. In most situations such as this, you will
probably decide to hunker down and work through the conflicts and
difficulties to put the whole project behind you (and to resolve not to
get into similar situations in the future). There may be times, however,
when your management concludes that tearing up a contract and walk-
ing away will be the best way to minimize its losses.
Again, avoiding projects in the first place that have potential for
conflict and committing only to work that has adequate protections
included in the contract terms are your best defenses against getting
caught in cross-organizational strife.

Execution Topic
74. How do I survive a late-project work
bulge, ensuring both project completion
and team cohesion?
We’ve all been here. The deadline looms and an enormous amount of
work remains. If your deadline can’t move, it’s best to see problems in
advance so you can explore options such as modifying your scope or
applying more resources. Regardless of how you proceed, you may
bruise some relationships. But by managing well, you can minimize the
impact.
Anticipating Problems
As you plan your projects, spend some time reviewing past similar work
where the last few weeks were stressful and chaotic. Looking at your
past projects, what might you do differently? What recommendations
emerged from the lessons learned for projects led by others? How could
you run your current project differently to ensure a more coherent end
game?
If past projects have gotten into trouble due to weak scoping defini-
tion, focus more effort on requirement planning, discussed in Problem
22. If excessive changes, particularly late in the project, have caused
problems, revisit your change management process (covered in Prob-
lem 84), and set earlier limitations on when changes can be considered.
If past testing issues are a result of insufficient early specifications,
define concrete activities early in your project to nail down testing and
evaluation criteria. Overall, seek to set up your project to avoid things
that have caused past difficulties.
Also focus on project risks, especially risks that relate to testing,
acceptance, and other late-project work. Develop contingency plans to
help you deal with unanticipated work near the end of your project.
Consider options for getting outsourced help or ‘‘borrowing’’ staff from
other projects, expediting techniques that could compress work dura-
tions, using potential ‘‘shortcuts,’’ and moving staff off-site to reduce
distractions and interruptions. Include budget reserve in your project
plans, based on the estimated costs of your contingency plans and met-
186

How do I survive a late-project work bulge? 187
rics from past projects. If your risk analysis reveals significant probable
delays, also negotiate a due date that includes an adequate schedule
reserve.
Schedule periodic reviews on projects with durations longer than
about six months. Use your reviews to assess progress, and set expecta-
tions that adjustments to the timing objectives may be necessary as
a result of the reviews. If significant changes prove necessary, begin
discussions and negotiations as early as you can; never wait until the
last minute to begin admitting you have problems.
Getting the Project Done
If you are up against an immovable deadline that is close and there is
more work remaining than you can realistically complete with your cur-
rent team as planned, start considering changes. The easiest changes to
make in the short term tend to be to your team members’ work sched-
ules. Consider the effect of dropping any other responsibilities outside
of the project for the remainder of your schedule to focus more time
and effort on project tasks. If overtime is an option, consider that, too
(but this may only solve one problem by creating another). When there
is more work to do than a realistic schedule permits, you may need to
be creative. Investigate to see if there might be any viable options for
delivering on time through extra staffing or contract help, or some other
expediting technique.
If you still face timing problems, reexamine your project’s require-
ments to see if dropping some of them could help. Begin with your
lowest-priority specifications, and investigate if removing any of them
could make enough of a difference. Before proposing any changes to
your scope, compare the value of the requirements you might drop with
any estimated costs of the additional resource costs required to keep
them. If paying for the additional help can be justified, plan to propose
that instead.
Work to reconcile the realities of the ‘‘iron triangle’’ of scope, sched-
ule, and cost for the remainder of your project, trading off between
scope revisions and additional resources as needed to protect the
schedule with the least overall impact.
Retaining Friends
It is often possible to get a project done on time through a combination
of superhuman effort and somewhat diminished scope. Doing this with-

188 How do I survive a late-project work bulge?
out some emotional cost is unlikely, but good project leaders work hard
to minimize the pain and damage to long-term relationships. This often
starts with sacrifices that you will need to make. You need to show that
you are willing to do at least as much yourself as you are asking of
others. Plan to take on administrative burdens for others to free up
more of their time. If people are working late, weekends, and holidays,
plan to be there too. Pitch in with work where you are qualified. Even if
you are not able to directly contribute, do what you can to facilitate
progress, such as running for food, handling follow-up and communica-
tions tasks, and other efforts that will help. Be encouraging and appre-
ciative, and remain upbeat. Shorten or eliminate meetings where
practical, and personally deal with any extra work that this might mean
for you without complaining.
Also keep overall track of where any extra burdens are falling and
work to balance the load across your team. Encourage people to help
each other. If everyone feels that all are in this together in times of
stress, collaboration can increase teamwork and build stronger relation-
ships. Intervene quickly to defuse any conflicts or arguments, and do
the best you can to maintain peace. Energy spent fighting will only make
your project work bulge bigger.

Execution Topic
75. How do I coordinate improvements
and changes to processes we are
currently using on our project?
If you realize in the midst of a project that you have a process problem,
you should consider fixing it. Before embarking on a process improve-
ment effort during execution, you need to consider the overall impact
on the project. If the potential long-term benefits are significant, though,
it may be better to act sooner than later.
Assessing the Need for Change
If you are having difficulty during your project with any of your pro-
cesses or methods, work with your team to assess potential improve-
ments. Develop documentation for both your current ‘‘as is’’ process
and a more desirable ‘‘to be’’ process. Verify the performance of the
current process using project status information, and set measurable,
specific improvement goals for the new version. In some situations, the
needed changes may be obvious and take little effort to analyze. If get-
ting diverted into this will materially affect your project, however, you’ll
need to justify the effort to your sponsor before going too far. If improv-
ing your process could adversely affect the project objective, it may be
better to meet your current project’s commitments and then deal with
process improvement afterward.
If you can realistically integrate a process change into your project
within its constraints, proceed with your process planning. If the pro-
cess affects only you, determine the costs and benefits of making the
change and proceed. If the change could affect others, involve them in
your analysis. For processes that do affect others, involve them in your
planning or at least enlist their support to conduct a pilot for a revised
process on your project that they might later adopt.
Planning for Change
Develop a process description for the new process, and document its
operating procedures. Develop any training materials or job aids needed
189

190 How do I coordinate improvements and changes?
for implementation, and adjust any project estimates that will be short-
ened or lengthened by the new process.
Enlist the participation of those who will be directly involved in the
new process planning for the change, and get their buy-in. Work to gain
the support of any other process stakeholders who will not be directly
involved, using vivid descriptions of the benefits of the improvements
and credibly documented measurable results.
If the process will affect your project objective or have impact
beyond your immediate team, also solicit the support of your sponsor
and management before proceeding.
Making and Managing the Change
Use training, mentoring, and process guidance to implement the pro-
cess change for your project. Monitor the results obtained using the
revised process, and compare them with your improvement goals. Also
look for unintended consequences and other adverse effects. If your
revised process fails to work as planned, work to correct it by adjusting
the process definition (or execution). If your new process proves to be
ineffective following your attempts to fix it, back it out and return to
using the earlier process.
If your process change does achieve your expected performance
goals, however, adopt it permanently as part of your standard project
management practices.

Control Topic
PART 6: CONTROL
76. How much project documentation
is enough?
Depends on:
g Project type and size
g Legal requirements
g Organizational and other standards
g Relevant methodologies
Deining Documentation Needs
All projects require some level of documentation. Large projects need a
lot of documents because of their complexity and to serve the needs
of a big team. Tiny projects may need very little, perhaps only some
handwritten lists of things to do and to verify. At a minimum, every
project must at least meet the documentation standards mandated by
the organization, and may also need documents required by regulatory
requirements, industry standards, and methodology needs. (Problem 6
explores some considerations related to standards and methodologies.)
Determining exactly what is useful to include beyond the minimum
required for your organization is up to your judgment, but what follows
includes some typical project-specific and general documentation.
Specifying Project Documents
Most project documents relate to definition, planning, or status. For siz-
able projects, most documentation will be stored in an online project
management information system (discussed in Problem 33), where all
team members can access it any time and from anywhere.
Definition documents will usually include:
g Project charter and overall project definition
g Deliverable requirements (including priorities, measurable
specifications, and evaluation criteria)
g Team roster (with roles and contact information)
191

192 How much project documentation is enough?
g Stakeholder analysis
g Contracts and other agreements
Planning information will typically contain, at least:
g Project work breakdown structure dictionary
g Project schedule
g Resource analysis and plans
g Risk register
g Specific plans as needed, such as communications, quality, or
procurement
Status information will evolve as the project progresses, and normally
will consist of a sequence of versions of:
g Status reports
g Change logs
g Issue-tracking logs
g Life-cycle and other reviews
g Project presentations
g Testing results
g Meeting minutes
g Formal communications
Specifying General Documents
In addition to documents describing your specific project, you will likely
need some documentation for your overall processes and methods.
These include such items as:
g Specification change process
g Testing standards
g Methodology and standards definitions
g Configuration control procedures
g Project infrastructure decisions and practices
Every project is different, so there can be enormous variation from proj-
ect to project for the documentation necessary in any of these catego-
ries. What you judge to be necessary could be a lot more, or a lot less,
than what is listed here.

Control Topic
77. How can I ensure all members on
my multi-site team have all the
information they need to do their work?
For project teams that are not located together there can be major prob-
lems with synchronization and information access. Effective project
leaders work to ensure that everyone has access to the same informa-
tion throughout the project.
Managing Communications
Keeping everyone on a distributed team in sync is the responsibility of
the project leader. Effectively communicating with remote team mem-
bers is explored in Problem 71. Project communication requires both
formal reports and team meetings and periodic informal conversations.
Use your one-on-one meetings and informal conversations to en-
hance your ongoing control. Invite questions from your remote contrib-
utors, and ask about any current problems they are having. Also discuss
upcoming challenges, risks, and potential conflicts to get a sense of what
each of your team members thinks will happen in the near future. Talk
about plans for current and scheduled activities, and work to resolve
any differences if you detect anything that is not consistent with your
overall plans.
When there are substantial changes that affect the project, set up a
specific meeting with your whole team to discuss them. Provide explicit
written documentation that clearly describes how the changes will
affect each person’s work. Follow up individually with each of your con-
tributors to ensure that all your team members understand the impact
of the changes on them. Also walk through any updated project docu-
ments and ensure that no one continues to use obsolete versions for
their work.
Maintaining Your Project Management Information System
A thorough, well-organized information base is the foundation for coor-
dinating a distributed project team. Establishing an online project man-
193

194 How can I ensure all members have the information they need?
agement information system (PMIS) is discussed in Problem 33, and
Problem 72 includes some pointers about using it to supplement global
communications. When establishing it, work to ensure adequate access
for all of your team members, regardless of their locations. Emphasize
that the current versions of all project documents and plans will be
stored online in your PMIS, and discourage use of offline copies that
might not be up-to-date. When you distribute reports or other communi-
cations, provide links to the main documents in your online repository,
not attachments.
When communicating changes, verify that the primary versions of
all documents are the most easily found, and that earlier versions are
stored in a way that makes access more difficult (for example, in an
archive folder or accessible only through an automated push-down func-
tion for retrieving previous versions). When discussing updated docu-
ments following a project change with each of your contributors, ask
them to delete any earlier local copies of revised documents and empha-
size the locations of the principal versions online in the PMIS.

Control Topic
78. How can I manage overly
constrained projects effectively?
Depends on:
g Project value
g Project priority
Managing Constraints
All projects have constraints. The deadline sets a time constraint. Your
finite list of assigned contributors sets a firm staffing constraint, and
also limits your budget. For some projects these constraints may be
soft, where the consequences of failing to meet one or both are not a
big deal. For other projects they may be immovable. What is always
true, however, is that for any particular project only some combinations
of scope, time, and cost are possible. The top-down objectives for a
project may start out as completely reasonable, absolutely impossible,
or anywhere in between. If your process for setting a project baseline
fails to drive the initial top-down goals into consistency with your plan-
based, bottom-up analysis, your project will not succeed. If your initial
project objectives are unrealistic, you must adjust them.
To do this, you will need to use your planning data to negotiate a
more plausible set of objectives with your sponsor and stakeholders.
This process starts with verifying the overall constraints provided by
your sponsor and key stakeholders in their initial top-down objectives.
Plan to ask ‘‘Why?’’ a lot, and probe persistently to uncover the basis
for each starting assumption. In your discussions with your sponsor,
determine which of time, scope, or cost is most important. Don’t accept
‘‘All three’’ as an answer. Get a sense of which of the factors is most
consequential by devising scenario-based questions. Ask questions
such as: ‘‘Would it be better to be a week late or to spend a bit more
money on a contractor to help us meet the deadline?’’ Keep digging until
you know which constraints are truly constrained and which are most
negotiable. (It’s never credible to constrain all three initially, as is
implicit in the old saying: ‘‘Fast, good, cheap. Pick two.’’). Planning is
your next step. Avoid committing to any firm project objectives before
you have developed a good sense of what is possible.
195

196 How can I manage overly constrained projects effectively?
Understanding the Work
Collaborate with your team in developing a credible, bottom-up plan
that can realistically deliver all scoping requirements. (Effectively deal-
ing with planning challenges is explored earlier in this book, in Problems
48 through 64.) For your initial plans, let the project duration and cost
factors fall wherever they may; focus on defining, estimating, and
sequencing all the work necessary to create your deliverable. If your
project is particularly risky, also incorporate provisions for contingen-
cies and reserve in your plans.
There will likely be significant differences between your initial plans
and at least some of your sponsor’s original goals. If so, attempt to
adjust your plan so that it meets the highest priority among scope, time,
and cost. If the best plan you can devise remains inconsistent with your
primary objective, attempt to optimize it using techniques such as rear-
ranging dependencies, shortening durations through staffing changes,
or using other means. If your best plan version is still well outside the
original goals, create several additional plan variations that come as
close as possible to meeting the stated objectives for just scope, time,
or cost alone, or in pairs.
Especially in cases where the differences are particularly extreme,
engage your team in exploring opportunities. Seek ways to deliver better
results (perhaps by employing an emerging technology that your stake-
holders are not aware of). Redefine the project deliverable so it solves
a class of problems instead of only the particular one it’s aimed at. Seg-
ment the work to deliver some useful functionality much earlier and the
full requested deliverable in later phases. In general, brainstorm other
project variations that might represent superior business opportunities.
(At times when you know that you are going to lose an argument, the
best strategy may be to change the subject.)
Prepare for discussion with your sponsor by making summaries of
plans for alternative projects that can realistically be undertaken. Your
planning data provides the fact-based information you’ll need to con-
duct a principled negotiation with your sponsor and stakeholders. Use
the data to negotiate a credible baseline for your project.
Negotiating a Realistic Baseline
Meet with your sponsor to discuss the project and set your baseline for
project tracking and control. Start your discussion with a summary of

How can I manage overly constrained projects effectively? 197
your best plan version (even if it is at significant variance with the initial
project goals). Demonstrate that it is consistent with past similar proj-
ects and is based on thorough analysis. If your primary plan significantly
differs from the original request, also present your additional plan-
based project alternatives as other options.
Discuss the value of the project, and discuss the resource require-
ments in your plan in contrast with the expected benefits. Also explore
the project’s overall priority, and any relationship between that and the
duration shown in your plan. Focus your discussions on comparing your
project’s plan-based needs with its expected results, not with arbitrarily
determined time or cost constraints.
If you encounter resistance, discuss the potential consequences of
setting an unrealistic baseline. No one wins with a project that has an
impossible goal. You lose because your project fails. Your team loses
because it will have been involved with an unsuccessful, depressing
experience. Even your sponsor and management lose when they force
acceptance of an unrealizable objective. They initiated the project, and
presumably they need what it is expected to produce. If it fails, they
won’t have what they want either.
Principled negotiation is based on facts and data, which are your
only real advantages in project negotiations. The other parties may be
more persuasive and certainly have more organizational power than
you do. Fortunately for you, there is also power in knowledge, and that’s
on your side. After planning your project, you are the world’s leading
authority on it. (And, your experience and knowledge were why you
were asked to lead the project in the first place.) In negotiating to adjust
unrealistic constraints, you must use what you know.
Resist emotional plays to flatter you, such as, ‘‘You are the best proj-
ect leader we have. Surely you can do this!’’ It really does not matter
how talented you are if the project cannot be done. If you are faced
with demands to finish the project faster, hold up your project schedule
showing the minimum duration with all its red and blue bars. Ask your
sponsor to pick any activities you should drop to meet a shorter dead-
line. This is a very effective way to show that a shorter project is infeasi-
ble, and most managers back down quickly.
With solid evidence of what is and is not possible, you should be
able to engage your sponsors and stakeholders in collaborative problem
solving instead of posturing. Discuss with them any alternate project
plans you have developed, and work together to find a version of the
project that is both possible and a good business proposition. If you

198 How can I manage overly constrained projects effectively?
have identified any promising opportunities, discuss them as well and
explore if they would be worth pursuing.
Work to establish a baseline for your project where the overall con-
straints are consistent with a credible set of plans, including a sufficient
reserve (budget and/or schedule) to deal with the overall project risk.

Control Topic
79. How do I keep my project from
slipping? If it does, how do I recover
its schedule?
Managing schedule performance starts with proactive tracking and
requires quick response for any adverse variances.
Monitoring Schedule Variance
When you collect status on your current work (generally weekly), also
request information on work scheduled to begin in the next two weeks.
Encourage your team members to inform you as soon as they know of
any potential problems with required inputs, initiation, execution, or
completion of all current and imminent work for which they are respon-
sible. Also request that your contributors let you know about needed
work that was missed in earlier planning.
Use your informal conversations with project staff members to dis-
cuss things that could affect upcoming work, and talk about their cur-
rent and future concerns about the project. Keep alert for anything that
could affect your timeline, including systems outages, predicted severe
weather, or other external factors. Also, periodically review your project
risks and use your analysis as an early warning for potential schedule
slips.
Work to detect scheduling problems as early as possible, and deal
with them when they are small. The longer it takes for you to notice
them, the harder you will have to work to recover and the fewer options
you will have for doing so.
Managing Your Critical Path
If there are any delays (or projected delays) affecting critical project
activities that could impact your deadline, determine the magnitude of
the slip. If the slip is minor, recover using small amounts of overtime or
getting help from within your team to expedite activities and catch up.
In some cases, successor activities may be able to begin on time (per-
199

200 How do I keep my project from slipping or recover its schedule?
haps with some small risk), even if all the prior work is not quite fin-
ished.
For more significant delays, begin recovery by using any contin-
gency that you may have set up to deal with that specific problem in
your risk planning or by applying overall reserves in time or money that
you have established at the project level. Investigate the possibilities
for revising some dependencies to allow subsequent work to begin on
schedule, restaffing upcoming work to reduce critical task estimates, or
‘‘crashing’’ future work in your project by adding additional resources
to get you back on track.
As a last resort, escalate particularly severe slips that you cannot
resolve within your project to your sponsor. If your schedule problem
is sufficiently serious, you may need to propose revising your project
baseline (or even cancelling the project).
Communicating Your Status
Managing schedule problems also requires effective, honest communi-
cation. For each significant issue you are managing, include a note in
your summary at the head of your next status report describing your
schedule problem. Include specifics about what you have done or are
doing about it, and follow up with updates in all subsequent reports
until you have resolved your scheduling issue.

Control Topic
80. What are the best practices for
managing schedule changes?
Depends on:
g Project scale
g Project priorities
g The cause for the change
Analyzing the Need for Change
The focus of this problem is schedule changes to pull in a deadline.
(Managing schedule slippage is discussed in Problem 79.) Demands for
schedule compression generally result from either solving project prob-
lems or requests from a customer or other stakeholder. Solving a prob-
lem is generally urgent, so the sooner you start to make the changes,
the better off you will be. Requested changes are usually discretionary,
so the best response at least some of the time is to say ‘‘no.’’ Whether
or not to make a schedule change comes down to a business decision:
Will your project be better off having made a change, or would it make
more sense to leave things as they are? Whatever the motivation, when
considering a scheduling change, make a decision about it promptly.
As with any project change decision, the primary considerations are
cost and benefits. The cost of a schedule change can vary a great deal,
depending on exactly how it is to be done. Use ‘‘what if?’’ planning to
explore options and develop cost estimates. Consider tactics such as
revising activity dependencies, expediting or ‘‘crashing’’ work remain-
ing through extra funding, increasing the project staff by reassigning
people from other work or hiring outside contractors, reducing sched-
ule reserve (if you have any), and any other schedule compression ideas
you can come up with. For small requested schedule changes, rearrang-
ing the remaining work and adding a little overtime may be sufficient.
For larger changes, seek a combination of viable tactics that will shorten
your project with a minimum of additional cost and increased risk.
Where appropriate, also investigate possible scoping reductions that
may be necessitated by the schedule change, and estimate any associ-
ated opportunity costs.
The decision also requires assessing what the change will be worth,
201

202 What are the best practices for managing schedule changes?
so also estimate the value of any expected benefits from the change. In
cases where you must respond to a competitor’s announcement to pro-
tect any project value, the benefits may be substantial and easy to ver-
ify. For most cases, though, be skeptical of the purported benefits of the
schedule reduction and request information on how they were esti-
mated. If the cost of compressing the schedule is small and the benefits
are large, work with your sponsor and stakeholders to make a sound
business decision on how to proceed. If the benefits are small, or ques-
tionable, compared with the costs and risks, strongly resist moving in
your deadline.
Adopting a Schedule Change
If you intend to commit to a shorter schedule, work to revise your plan-
ning documents. Revise your activity cost and duration estimates as
appropriate, noting all increased risks as you proceed. Update your
schedule dependencies as necessary, preserving a realistic activity net-
work for all remaining project work. Before you finalize your revised
documents, conduct an in-depth planning review, focusing on new risks
and any consequences for work outside of your project.
Present your new project plans to your sponsor and stakeholders,
and get their formal approval for any increases in project costs or modi-
fications to delivered scope. For large changes, establish a revised base-
line and work to manage stakeholder expectations for your modified
project.

Control Topic
81. How can I effectively manage
several small projects that don’t seem
to justify formal project management
procedures?
General principles for running small projects are found in Problem 8.
This problem focuses on using plans to track and control several simul-
taneous projects.
Initiating and Planning Small Projects
Small projects in most organizations tend not to vary a great deal from
one to the next, so there are a number of things you can do to simplify
the process of getting them going. Small projects may not require a great
deal of formal process or overhead, but retaining control does require
that you develop at least a minimum set of basic project documents.
You may not need much, but it’s always best to scale your project man-
agement processes to the work at hand.
Projects are often short because their deliverables are relatively
simple. The deliverables are also frequently variations on a theme, so
you can usually collect and document the requirements easily using
forms or check-off sheets. This significantly reduces overhead and the
possibility of missing something. Similarly, planning documents may be
based on templates that describe the work normally performed in suffi-
cient detail that you can develop plans for each new project with just
some minor additions, deletions, and edits. If you lack these types of
templates, begin developing them for your current projects, and save
them to facilitate planning for future projects.
Set up a repository for project documents for each of your projects.
Involve the contributors who will work with you in ‘‘fast-track’’ planning
activities to capture what the project must do. Review the plans to
ensure that all needed activities are listed, and at a minimum review
their sequence and the overall project workflow. Doing this with yellow
sticky notes on a wall or whiteboard may be sufficient to establish a
logical work progression that will avoid problems and rework. Also do
203

204 How can I effectively manage several small projects?
at least rough estimating for the required work, enough to verify that
the overall project timing is believable.
Whether you are working with the people on your projects full-time
or not, assign explicit owners for each project activity. Obtain a reliable
commitment from each person to complete the work on time.
Projects that are small may not take all of your time, but they need
what they need. Unless your projects have almost no staff or they
involve a lot of ‘‘waiting’’ time where there is nothing that you need to
manage, you will probably not be able to keep up with more than about
six projects. If they are more complex, your limit will be smaller. If you
take on more projects than you can reasonably keep up with, you will
lose control.
Controlling Small Projects
Status collection and reporting also need not be an overwhelming pro-
duction. If you are managing a set of projects that are all staffed using
the same pool of people, you may be able to collect status on all of them
together. Each week, request status on all open and due work from each
of your contributors, and keep your (and their) overhead as low as you
are able to by making the process for responding as simple as possible.
Whether or not the same people are working on all of your projects,
you can reduce your status communication efforts by producing a single
weekly report covering all of your projects. Keep your reporting simple,
but include a clear, ongoing summary that shows your progress on each
independent project.
One key for controlling multiple small projects is to not let them
meander. Work to minimize changes and scope creep, and endeavor to
avoid surprises at the end of the project. If you do a good job in specify-
ing the deliverables at the start and not much changes in the course of
a brief project, your closure should be straightforward.

Control Topic
82. What are good practices for
managing complex, multi-site projects?
To control big complex projects or programs you need to manage a
large team of contributors, complicated technology, and a hierarchy of
interdependent schedules. Avoiding the pitfalls inherent in this requires
technique and discipline (and luck).
Leading a Large Distributed Team
Guidance for setting up a large program is explored in Problem 21. Get-
ting a large team of people headed in the same direction starts with very
strong sponsorship from someone who has the respect of the people
involved and who will fund and support an effective program start-up.
You also will benefit from a vivid and compelling vision for the program
that will motivate and inspire all who are involved.
Keeping people engaged requires a lot of communication, with at least
monthly all-program meetings to discuss what is going on, and weekly
meetings in between the program meetings for each of the project teams.
An inviting and meaningful ‘‘open-door’’ policy—where anyone may ask
anyone else about anything related to the program—also serves to
increase involvement, whether people actually take advantage of it or not.
The program leader and any program staff also need to establish
relationships and trust among all the project leaders, and encourage
effective interactions throughout the program team.
To avoid some common pitfalls, periodically bring people together
for scheduled face-to-face meetings to maintain motivation and teamwork
on long programs, hold program-level monthly meetings at different times
of the day so at least one will be when your remote contributors are
awake and alert, and use all the means of communication available to you
to maintain common understanding and effective coordination of your
program team.
Dealing with Complex Technology
Managing complex technology is also a challenge on large programs. It
begins with engaging skilled subject matter expertise and dealing with
205

206 What are good practices for managing complex, multi-site projects?
feasibility issues as early as possible. In order to effectively delegate
work to independent teams that will be responsible for their execution,
you must strive for coherent decomposition of the scope. You also will
need to schedule periodic technical reviews during the program to
detect problems and make adjustments.
The biggest technology-related pitfalls for programs usually relate
to inadequate feasibility analysis and unexpected consequences of
approved changes. Clearly define all program deliverables, particularly
those where the work is outsourced. Large programs require very
strong and formal specification change management to remain in con-
trol of complex technology. Be scrupulous in analyzing all proposed
changes, and remain vigilant for unintended results following any you
accept. Manage program-level issues promptly, especially when they
relate to technical problems.
Managing a Hierarchy of Schedules
Programs depend on consistent schedules for all the included projects
and an integrated timeline for the program as a whole. The process for
identifying project interfaces and building integrated program sched-
ules is outlined in Problem 56. To remain in control, periodically verify
that all cross-project dependency agreements remain valid, especially
after any personnel shifts or accepted specification changes. Also con-
duct risk reviews about once per month to pick up on emerging issues,
and schedule overall program planning reviews at least twice per year
to revalidate the objectives and to focus on detailed planning for the
next phases of program work.
Establish a coherent, centralized program management information
system that is organized to facilitate the needs of all the contributors
and affords access to all pertinent program documentation.
Primary problems related to scheduling for large multi-site pro-
grams include significant work that falls through the cracks and is not
included in any of the planned projects, failure to coordinate work
around international holiday schedules, and inadequate cross-project
coordination within the program.
Getting Lucky
Apart from sharing the observation that ‘‘luck is what happens when
preparation meets opportunity,’’ I can’t help you much here.

Control Topic
83. How do I best deal with time
zone issues?
In a perfect world, project teams would all sit together. This ensures
ongoing robust informal communications and effective teamwork, and
(mostly) lets everyone get adequate sleep. Real projects can’t always
co-locate, so you need to do what you can to compensate.
Planning for Around-the-Clock Stafing
There are some advantages to a distributed team. ‘‘Follow the sun’’
operations afford better coverage and might, for some types of activi-
ties, significantly reduce duration estimates. If the work is sufficiently
simple that it can be quickly picked up and advanced by contributors
working independently, assign it to one contributor in India for one
half of the day and to another in the United States for the other half.
Not all tasks can be decomposed at this level, but for those where it
is possible you may be able to complete the work in about half the
time.
Setting up meetings to support your team will inevitably be some-
what inconvenient. You may need to hold several meetings, including
some that you may either need to delegate leadership for or plan to
lose some sleep over. Leading a small global team a few years ago I
had a few contributors in Shanghai, a subject matter expert in the UK,
and I was in California. Our weekly team meetings were at 3 P.M. in
China, 7 A.M. in England, and 11 P.M. for me. This was usually workable,
except for the times when I had 6 A.M. teleconferences the following
day. Work to minimize the pain of cross-time-zone meetings by moving
them around occasionally and keeping alert for opportunities to take
advantage of travel to catch people in more convenient locations.
Also be aware of the international dateline. The effective overlap
across the Pacific is essentially only four days per week; Monday in Asia
is still the weekend for North and South America, and the weekend
starts in Asia before people in the Americas get to work on Friday.
207

208 How do I best deal with time zone issues?
Communicating Globally
Distributed teams depend heavily on asynchronous communications,
especially e-mail. Take full advantage of electronic messaging of all types
to support your project, but always follow up complicated information
that you distribute with at least a telephone call to verify that it was
received and understood. Never leave for the day with pending ques-
tions in your e-mail. If you wait to reply until the next morning, you will
cost your remote contributors an extra whole day. Also, design your
online project management information system to ensure that everyone
can ‘‘self-serve’’ and retrieve the information he or she needs without
waiting a day for you to show up at work.
Set up one-on-one meetings by telephone with each of your team
members, finding a time during their workday when you are also at least
somewhat alert. Project leaders on global projects need to be flexible,
getting up early and staying up late to keep up with their projects. After
any complicated telephone discussions or meetings, follow up in writing
to summarize what was said or decided.

Control Topic
84. How can I manage changes to
the project objective in the middle of
my project?
Scope creep is one of the biggest problems on modern projects. There’s
an old saying: ‘‘Projects quickly get to 90 percent complete and stay
there forever.’’ This is not about incompetence or laziness; it’s about
projects where the rate of change exceeds the rate of progress. Manag-
ing this adequately requires setting up an effective change management
process and then enforcing its use.
Setting the Foundation for Change Control
Project change control depends on a thoroughly defined scope that is
supported by a credible baseline plan. Even a robust-looking plan will
not help much if your project scope is poorly defined. Setting require-
ments is discussed in Problem 22, and establishing clear project priori-
ties and a realistic project baseline (including a clearly defined scope) is
covered in Problem 78. Effective change control requires a frozen scope
against which proposed changes would be applied, and it relies on proj-
ect priorities to ensure that any changes accepted are consistent with
what is most important to your project.
To protect your baseline and defined scope, you will need a well-
defined, sufficiently formal process to manage all specification changes.
Unless your organization has an effective global process for doing this,
plan to define (or refine) your own. Work with your team and stakehold-
ers during initiation or planning to set the foundation for this, stressing
the importance of a stable scope and the potential pain and damage to
the project caused by poorly managed, chaotic change. Also obtain buy-
in for your change process from your sponsor and management. Stress
that the control afforded by a good process for managing changes will
be instrumental in ensuring that you can deliver on the results they have
requested. Controlling changes from managers and powerful stakehold-
ers can be among the most damaging and difficult to manage. Dealing
with these particular cases is explored more deeply in Problems 85 and
86, respectively.
209

210 How can I manage changes to the project objective in the middle of my project?
Establishing an Effective Change-Control Process
All effective change-control processes are based on answering two ques-
tions: ‘‘What’s it cost?’’ and ‘‘What’s it worth?’’ Your process should pro-
vide a mechanism for anyone involved with the project to propose a
change, but regardless of the source, always ask the submitter to
include some initial cost-benefit analysis.
In defining the change management process, make the default dispo-
sition of all proposed changes ‘‘reject.’’ Put the burden of proof that a
change is necessary on the requester, and always ensure that any
changes that you do accept are based on a good business case.
Consider the source for each change. Be skeptical of changes from
within your team unless they directly relate to a current problem or
issue you must resolve. Some of the worst examples of scope creep arise
within project teams. (We are endlessly clever, and continually coming
up with new, bright ideas.) If the source of the change is outside of your
team, also be careful. Even for changes where the consequences (such
as additional costs or time slippage) will be borne by a customer, modi-
fying your project in flight can be a very poor idea.
Some change proposals will come in from your sponsor or manage-
ment. Having a strong process that all of your stakeholders have
accepted in advance is particularly important in these cases. If you do
not have an approved, objective process in place prior to the change
request from the people you work for, you will have a tough time saying
‘‘no’’ (and you may be unable to anyway, even with a good process in
place).
Build a step requiring thorough, objective analysis into your change-
control process. Work to verify any benefits claims made for each
change, especially for changes that are not mandatory. Also verify what
the change will do to your project’s costs and timing through a review
of your current plans. Consider potential unintended consequences,
particularly for proposed changes on large, complex programs.
Set objective criteria for evaluating each change, rejecting all
changes where the business case is poor (or based on questionable
information), the change is materially in conflict with stated project pri-
orities, or there could be unacceptable adverse consequences. Set the
bar for acceptance particularly high for any changes that will materially
affect your project baseline.
In addition to the default ‘‘reject’’ disposition, include possible
responses for ‘‘accepted with modifications’’ and ‘‘not yet,’’ as alterna-
tives to ‘‘accepted.’’ Use the other responses to deal with good ideas

How can I manage changes to the project objective in the middle of my project? 211
that may be only partially justified or would be more appropriate in a
follow-on project. In addition to setting up decision criteria, establish
roles for named individuals in the change process, including at least one
person with the power to say ‘‘no’’ and make it stick. (This is often the
project sponsor.)
Using Your Change-Control Process
When changes are submitted, capture key data for them in a tracking
log and verify the submission form is complete. Return incomplete sub-
missions to the person who sent it (or help him or her to finish it).
Analyze each change promptly and meet to consider all queued changes
on a regular schedule. Use your meeting to make a decision on each
pending change, post the disposition on your change log in your project
management information system, and provide feedback on your deci-
sions directly to the individuals who submitted the changes.
For all accepted or partially accepted changes, review your planning
and other project documents. Make updates as needed and communi-
cate them to your team members and stakeholders. If an accepted
change materially affects your baseline, review the changes with your
sponsor and key stakeholders and gain their approval to revise your
objectives.

Control Topic
85. How should I respond to increased
demands from management after the
project baseline has been set?
Managing changes submitted by sponsors and upper-level managers is
a special case of scope change management. In general, your best
defenses are a well-defined, objective process (as described in Problem
84) and clear presentation of any adverse consequences to the project.
For changes you must absorb, work to minimize their impact.
Using Your Change Process
Establish and get support for a well-defined process from your sponsor
as part of your initial project discussions. Use recent past problems and
the pain and chaos of past projects where changes were not controlled
well to justify an objective process with unambiguous decision criteria.
Such a process is relatively easy to sell at project start-up, when the
focus is on planning and logical analysis. Such a process can be very
difficult to shoehorn into a project later, as the pressures of execution
build and after proposed changes begin to surface.
Armed with an objective process that enables you to examine the
realistic costs and benefits of each submitted change, you will have a
strong defense against arbitrary changes. Insist that all changes be
analyzed, regardless of their source. Be skeptical of projected benefits
of changes, particularly where the change appears to be discretionary
or optional. Be diplomatic but firm in documenting a thorough justifi-
cation for each change, even those that originate with your manage-
ment.
Also be scrupulous in analyzing consequences, including any impact
to project timing, budget, or scope, especially where the change could
have an effect on one of your project’s top priorities. Also analyze other
potential consequences of each change, such as additional overtime,
loss of team motivation, or potential unintended effects.
212

How should I respond to increased demands from management? 213
Making Good Change Decisions
If the change appears to be mandatory, or it has a credible and compel-
ling business justification, prepare to accept it. As with any accepted
change, update your project documents and communicate the revi-
sions. If the change is major, work with your sponsor in resetting your
project baseline.
If the change is less than compelling, use your analysis to avoid
accepting it. Vividly describe the consequences of the change, empha-
sizing any that directly conflict with stated project objectives. Because
you are dealing with your management, you’ll need to tread softly. One
possible approach is to start with, ‘‘Yes, we can implement that change,
but that will require these additional changes. . . .’’ Especially for
changes proposed late in the project, describe what will have to be
taken out of the project to compensate for what management proposes
to add. Make the impact of the change clear, and recommend that it be
rejected.
If your most logical arguments are ineffective, propose deferring the
change request to be part of a later project or implementing it as a
follow-on effort after you have completed your currently defined proj-
ect. If all else fails, counterpropose that only some parts of the proposed
change be accepted, trimming off the most harmful aspects of the
change while retaining some of its benefits.
You are always at a disadvantage when debating with people higher
up in the organization than you are, and sometimes they will force
changes into your project despite your best and most logical arguments
to avoid them. When this happens, document the recommendation you
made and the reasons for it. Include honest analysis of the impact of the
change in your status reporting, and revisit the change decision as part
of your post-project retrospective analysis. Use your lessons-learned
analysis of questionable management-commanded changes to tighten
up your change process and to help you in handling similar situations
on future projects.

Control Topic
86. How can I avoid issues with new
stakeholders, especially on global
projects?
Not all stakeholders are involved at the start of every project, especially
on projects with long durations. As new players come into the mix for
your work, make them aware of what you are doing and why, and work
to understand their needs and interests. Endeavor to harmonize their
requirements with your project, by using your change process and by
involving them in ongoing project communications.
Identifying Stakeholders
Be proactive in your stakeholder analysis. Consider all those who are,
should be, or even might be affected by or have an effect on your proj-
ect. The more complete you can make your early stakeholder involve-
ment, the better off you will be in the long run. If you are working on a
local pilot of something that might be later rolled out worldwide, reach
out to potential stakeholders and involve them in critiquing your scope.
If you are developing a product that will be sold initially in only one
market but you suspect would have appeal elsewhere, familiarize your-
self with regulatory requirements and discuss possible needs in other
locales. It is much easier to develop a deliverable with enough flexibility
to conform to a range of initially documented standards than it is to
retroactively force-fit a narrowly defined deliverable to meet unantici-
pated requirements.
Inevitably you will miss someone, and there will also be stakehold-
ers who will become involved with your project as it is running for rea-
sons you cannot control or anticipate. In these cases, you will need to
establish good working relationships with your new stakeholders as
they come into view.
Engaging New Stakeholders
When you identify new stakeholders, promptly set up a meeting to intro-
duce yourself. Work to establish trust with your new stakeholders and
214

How can I avoid issues with new stakeholders, especially on global projects? 215
place them in contact, if they are not already, with your other stakehold-
ers and your sponsor. At least initially, assume that all new stakeholders
are allies for your project; be open and friendly. Provide documents
describing your project and offer access to the portions of your project
management information system that are available to other stakehold-
ers. Review the objectives and expectations you are pursuing, and
explain the overall value of your project and its vision. Describe your
progress to date, and lay out your plans for the remainder of the project.
Respond to any questions about your project candidly. Ask about
any specific requirements or needs that your new stakeholder has. Show
how your project addresses any that are presently part of your scope.
Explicitly list any stated requirements that are not included in your proj-
ect as it is presently defined. A process for effectively collecting cus-
tomer and stakeholder requirements is explored in Problem 22.
Managing Project Changes
Explain your change management process (similar to that described in
Problem 84) to your new stakeholders, and work to secure their buy-in
for its use. For each listed requirement that is not already part of your
project, document a change proposal and begin analyzing each one. As
a sign of goodwill, plan to accept most small changes that don’t conflict
with your current scope if you can accommodate them without signifi-
cant additional cost or other project impact. For changes that will repre-
sent noticeable changes to your project, use your change process to
determine how to proceed. If the cost of a change will exceed its pro-
jected value, plan to reject the change. If the change as stated is incon-
sistent with the wishes of your existing stakeholders, engage all the
individuals involved in discussions to resolve any conflicts before mak-
ing any decisions. Engage them in negotiations where needed to revise
the requested change as needed to balance the needs of all of your
stakeholders. For changes that you intend to reject or defer, you may
need to involve your sponsor in delivering the decision and to help you
in managing stakeholder expectations.
If a requested change has significant benefits compared with its
costs, use your change process to verify that accepting it is reasonable
and appropriate. Determine the overall impact of the change before
accepting it, and always consider possibilities for accepting it with mod-
ifications or committing to delivery of the specific requirements at a
later time. If justified by a credible business case, plan to accept the
change and modify your project scope. Before saying ‘‘yes,’’ adjust your

216 How can I avoid issues with new stakeholders, especially on global projects?
plans accordingly, and if the change will require any major shifts to your
overall objective, work with your sponsor to reset your project baseline.
Communicate the disposition of all proposed changes to your stake-
holders, whether accepted or not. Work to adjust stakeholder expecta-
tions to align them with your project’s goals, involving your sponsor
where necessary.

Control Topic
87. What should I do when team
members fail to complete tasks, citing
‘‘regular work’’ priorities?
Ensuring follow-through begins with getting a credible commitment
from the contributor who owns the work. Some techniques for this are
discussed in Problem 48. Successful closure relies on proactive tracking
and holding people to their commitments, as discussed in Problem 66.
However, priorities do shift, so there are times when this may not be
enough. Faced with delayed work that must be done, you need to first
verify priorities, and verify the root causes. (The actual reasons for
delayed delivery may not always be what people tell you.) If you are
unable to restore reliable commitments for your project, you’ll need to
find alternatives and make project adjustments.
Verifying Work Priorities and Causes
If assigned project tasks are not being completed as planned, you need
to find out why. Even when people tell you that they have conflicting
higher priorities, that may not be the whole story. The list of possibili-
ties for why people fail to do what they are supposed to do is quite
lengthy, including:
g They have too much work overall.
g They need training or help to do the work.
g Their responsibilities and commitments are unclear.
g The work requires more authority than they have (or than they
believe they have).
g They get no feedback on their work or they are punished for doing
things correctly.
g They are rewarded for doing the wrong things.
g They don’t have adequate documentation or job aids for their work.
g Their work environment makes doing their work difficult or
impossible.
Meet one-on-one with your contributor and discuss his tasks to learn
what is really going on. If he lacks training or the actual problems are
unrelated to a conflict with other priorities, do what you can to resolve
217

218 What should I do when team members fail to complete tasks?
the issues. If there are higher priorities, determine what level of commit-
ment is realistic for your team member. If your issue is with a part-time
contributor, consult the advice in Problem 42. As you verify the amount
of time available to your project, update your project resource analysis
using the techniques discussed in Problem 60.
If your project’s overall resource capacity appears diminished, set
up meetings with the managers involved to discuss the situation. Review
the priorities of your project’s tasks relative to the other work with
them. If your assigned contributor’s other activities are both more
important and urgent for the organization, you will probably need to
adjust your project.
If, however, you discover that the actual priorities for your work are
higher, use this information to reestablish the commitments and free up
the effort needed to get your project activities completed. Escalate
these discussions if necessary, and involve your sponsor and managers
where appropriate to ensure that the work being done aligns with the
organization’s priorities. Work with the other managers and project
leaders involved to modify the timing for their work as required.
If other priorities have eclipsed yours, though, you will need to find
other options.
Adjusting Your Plans
One option to explore is getting help. The contributors whom you were
counting on who are now unavailable may free up some of your funding.
If so, explore options for locating substitute staff in your organization or
contracting for outside help. If you have lost access to a contributor
possessing critical skills, you may be able to fill the gap by training one
of your other team members, or by recruiting the individual you were
counting on to mentor someone on your staff through the work. In some
cases, you may be able to find a way forward by revising a ‘‘make vs.
buy’’ decision and purchasing a component instead of developing one
that requires time and effort you no longer have.
Even if you do come up with an alternate path forward for your
project, you may still need to make significant project changes. Revise
estimates affected by the changes and develop a credible revised sched-
ule for your project. Review your plans and update them to reflect all the
necessary modifications. Most of the options you consider will probably
have adverse cost implications, so discuss your plans with your sponsor
and get approval in advance for any significant budget increases. Work
with your sponsor to reset the baseline for your project if necessary,
and communicate all significant changes to your stakeholders.

Control Topic
88. What is the best way to manage my
project through reorganizations, market
shifts, or other external changes?
External changes that affect projects are common. Protecting (and even
improving) your project management processes during organizational
changes is explored in Problem 20. This problem focuses on preserving
your project objectives through proactive monitoring and by effectively
dealing with changes.
Anticipating Changes
Change occurs frequently in some project environments, and it can sub-
stantially disrupt your work. You can significantly minimize the impact
on your work if you see it coming and prepare for imminent changes in
advance.
One powerful technique to help you see changes on the horizon is
risk identification. You can uncover a wide variety of potential threats
by periodically brainstorming risks or asking people to tell you about
external factors that might hurt your project. Assess the risks you
uncover, focusing particularly on risks that could have a major impact.
Informal communications with your team and stakeholders can be
another fertile source of information on potential external changes. Ask
about rumors and probe for things that people are worried or con-
cerned about. As you discuss scenarios, review the specific conse-
quences that a possible change might represent for your project.
Another early indication of priority changes and other shifts that
could affect your project is when the work done by people from other
organizations begins to slip, as discussed in Problem 87.
When conducting project reviews, as described in Problem 94, take
advantage of your risk management evaluation. Consider how you could
respond to future changes that people are concerned about.
If a rumored or probable change appears imminent, gather your
team and discuss responses as soon as you discover it. Determine how
you can detect that a change is coming and assign someone on your
team to monitor the situation. Seek a trigger event that signals changes
219

220 Managing a project through reorganizations, market shifts, or other changes
you are concerned about that gives you as much advanced warning as
possible.
Managing Through Change
If something external to your project changes, take action. If you have
relevant contingency plans, begin using them. If organizational priorities
are changing, protect your relative priority as best you can using the
value of your project; the influence of your sponsor and stakeholders;
and, if you are near completion, the fact that you are almost done. If the
change results in your losing your project sponsor, take advantage of
the advice in Problem 17. In general, position your project as well as
possible to minimize the change’s impact.
External changes may result in specific modifications to your proj-
ect that you will need to manage. If there are necessary scoping
changes, use your change management process to evaluate and imple-
ment what is required, as outlined in Problem 84. When major changes
occur outside your project, consider scheduling a project review to
update your plans and reconfirm your objectives, as discussed in Prob-
lem 94.
Even if there appear to be no huge changes to your project ob-
jectives, it’s good practice to review your project baseline with your
sponsor and spend some time confirming expectations with your stake-
holders following a big external shift. Following significant organiza-
tional change, your sponsor and key stakeholders may not remain in a
position to continue their commitment to your project. Some external
events, such as a major competitor’s announcement of a product that
eclipses yours, could even result in project cancelation.

Control Topic
89. How should I deal with having too
many decision makers?
Although it is not entirely desirable to have a very large number of peo-
ple involved with decisions, the fact is some decisions will have a lot of
stakeholders. To make decisions work you will need sufficient consen-
sus (or at least acceptance), so you must involve at least the principal
people from whom you need buy-in.
Involving the Right People
For some decisions there will be one autocratic decision maker. For oth-
ers you may seek unanimity from a team of collaborators. For most deci-
sions, though, you will deal with some variation in between these two
extremes. Although having a single person dictate all decisions is fast,
and in emergencies may be necessary, for project decision making this
usually doesn’t work very well. Unless team members, stakeholders, and
others who may be affected by decisions are involved with the deci-
sions, they may not accept them. When too many ‘‘command and con-
trol’’ decisions are inflicted on a team, the members will become
demotivated and may eventually quit. That said, decision processes
requiring that everyone agree don’t work very well either. They are
excessively time-consuming and may never come to closure.
For a given decision, list each person who could be involved. Deter-
mine who is ultimately accountable for the decision. It could be you as
the project leader, your sponsor, or some other person. Use a ‘‘RACI’’
matrix to categorize everyone who is involved. Assign the people who
must participate in making the decision as ‘‘Responsible,’’ including all
who must cooperate or could block implementation of the decision.
Assign one and only one owner to be ‘‘Accountable’’ for the decision,
ideally yourself. Assign people who could impact the effectiveness of
the decision as ‘‘Consulted,’’ and assign those who need to know about
it as ‘‘Informed.’’
Discuss the decision to be made with all the ‘‘R’’ people, and confirm
that each will participate in the process. Also consider directly involving
any of the ‘‘C’’ or ‘‘I’’ people, but include them only if you can come up
with a compelling reason or if an ‘‘R’’ person strongly recommends it.
221

222 How should I deal with having too many decision makers?
Understanding Issues and Options
Meet with the people who are to participate and agree on a clear state-
ment of the decision at hand. Also clearly define and document any con-
straints you are facing, and confirm the decision process you plan to
use.
For binary decisions such as those requiring only a ‘‘yes’’ or ‘‘no,’’ a
discussion followed by a simple vote may settle the question. For more
complex decisions where there may be many possible outcomes (for
example, determining what to include in project scope when working
with a diverse group of stakeholders), you’ll benefit from a more struc-
tured process. If some or all of the people involved are geographically
separated, refer to some of the ideas in Problem 90.
Brainstorm suggested criteria that should be considered in making
the decision without debate or criticism. Develop a single list including
all of them and prioritize the list through discussion or by using a tech-
nique such as ‘‘multivoting’’ (where each person gets a certain number
of votes to apply however he or she pleases). If any of the listed criteria
lack support and there is agreement to drop them, cross them off.
Throughout the decision process, encourage all to participate equally.
Monitor for excessive input from strong personalities and by people par-
ticipating who have more position power or authority, and draw out
participants who are too quiet.
Next, focus on decision options as a team. Again without debate or
criticism, let people list their preferred recommendations. When you
have collected the options, discuss any of them that are unclear and
consolidate any that appear redundant. Consider how well each alterna-
tive meets your defined decision criteria, and through discussion or
weighted averaging using a spreadsheet or similar tool, determine
which option best meets your criteria.
Making a Decision
Consider the top option, allowing people to raise any significant objec-
tions. Discuss any pitfalls, possible unintended consequences, and risks.
If you find strong reasons to not accept the option that appears to best
meet your stated decision criteria, loop back and review the original
criteria. Adjust your criteria as appropriate, and continue your discus-
sions and systematic analysis to strive for closure.
Discuss any objections that arise and work to address them. If the

How should I deal with having too many decision makers? 223
decision preferred by most remains strongly objected to by some,
explore whether making adjustments to it might help. Avoid having one
person or a small group dominate your final decision process, and make
the final selection process as objective as possible. Strive to reach a
consensus decision that all will accept.
If you come to an impasse where a few key people remain opposed
to the decision, use your influence to attempt to secure at least accep-
tance of the recommendation favored by the majority so that you may
proceed. As a last resort, escalate the decision to your sponsor or upper
management in your organization, providing them with the results of
your analysis and your majority recommendation. Once a decision has
been made, communicate it to all people involved, update any affected
project documents, and put it into effect.

Control Topic
90. How should I manage multi-site
decision making?
Involving members of a distributed team in decision making begins with
using a well-defined objective process such as that described in Prob-
lem 89. It also involves investing the time required to ensure that all
who need to be involved take part, regardless of their location, and will
accept the decision.
Engaging Stakeholders
For decisions that will affect people who are geographically separated,
it can be difficult to identify the people who need to be involved. Once
identified, it can also be hard to get them to participate in making the
decision. For example, decisions affecting a lot of people across a large
program with many distributed project teams can be quite complicated,
and they may appear to be more of a distracting time waster than an
urgent imperative. If you are responsible for such decisions, a lot of the
responsibility for locating and gaining the cooperation of the right peo-
ple will fall on your shoulders.
Begin determining who needs to be involved by discussing the
issues requiring a decision with key stakeholders, such as project lead-
ers, subject matter experts, key contributors, and program or project
staff members. Through your discussions, identify the people who must
buy in to the decision and approach each of them individually to gain
his or her commitment to help make the decision.
In particular, find and engage the individual who has the largest
stake in the process. Use your key stakeholder’s reliance on making a
good decision to enlist his or her help in organizing and running the
process. Many of your meetings will probably be on the telephone. Set
them up to be at a time convenient for the other person, and do your
best to make them as effective as possible.
Framing the Decision
One effective way to approach distributed decision making is to take a
step-by-step approach. Begin working with your key stakeholder to state
224

How should I manage multi-site decision making? 225
the issue requiring a decision. Document it, and then discuss it with all
the other participants in the process, one by one. Edit as you go, using
the feedback you pick up. Work to craft a coherent problem statement
that reflects the concerns and issues important to all involved, and end
by returning to your principal stakeholder. Using a ‘‘one-sheet’’ tech-
nique allows each person to contribute but ensures that the final ver-
sion will fairly reflect everyone’s perspective. As described in Problem
23, this ‘‘one version of the truth’’ process can be very effective for gen-
erating consensus with a diverse, distributed team. While you are col-
lecting and integrating feedback, discourage people from jumping
directly to problem solving and final decision proposals; focus initially
on getting the question framed correctly. After you have met with every-
one, verify that all your participants agree that the question is appro-
priate and that it makes sense.
Proceed with your process, collecting suggestions for decision crite-
ria, and then follow up by collecting potential decision options from
everyone. Based on the inputs you collect, craft a potential decision
recommendation with your key stakeholder. Discuss the proposal with
all the others, one by one, marking it up with suggestions as you pro-
ceed. After you have discussed the proposal with everyone, share the
resulting markup with all.
Committing to a Decision
If there is general agreement, publish the decision and put it into effect.
If residual issues and objections remain, discuss options for minimizing
them. To help generate consensus, keep the consequences of failing to
come to agreement visible. Consider bringing people face-to-face to
work out particularly serious disagreements. As a last resort, escalate
completely intractable decisions to your upper management for resolu-
tion.
Communicate the decision to all affected, and update any docu-
ments in your project management information system so that everyone
will have the information necessary to move ahead.

Control Topic
91. What can I do when people claim
that they are too busy to provide status
updates?
Getting cooperation from your team members for project management
processes in general is covered in Problem 36. Encourage effective
status cooperation using carrots and sticks. If that doesn’t work, look
for alternative methods to keep up with what is going on.
Providing Encouragement: Carrots
One of the most critical factors for status collection is keeping the pro-
cess as simple as possible. If you expect a lot of detail or make people
figure out exactly what status they need to provide, you will get only
intermittent results. It’s better to send each contributor a list of all his
or her current and approaching activities with a space for a date and
another space for an optional comment. (Past dates signify completion,
and future dates show expected completion.) Make the reporting pro-
cess easy and it will leave little room for excuses. Periodically, ask your
team members to comment on your status process and request sug-
gested improvements. If your process needs improvement, fix it.
For people who miss once in a while, especially if they are not local,
send a reminder or call them on the telephone. Be persistent and willing
to ask more than once.
If you have team members who are chronically unreliable in provid-
ing input, meet with them to talk about the situation. If possible, meet
face-to-face for your discussion. Explain how you use the status and why
it’s important. If there are barriers or problems to their reporting pro-
cess, discuss and work to resolve them. If there are issues with how the
information is used, such as criticism or punishment following submis-
sion of bad news, figure out how to avoid it (as well as any other motiva-
tion for ‘‘gaming’’ the information, as discussed in Problem 68).
If the issue truly is that your contributor has more assigned work to
do than he or she can handle, review the assignments that everyone is
carrying and rebalance project work more equitably. Overall, encourage
cooperation with your status collection process by thanking people for
sending it (even the bad news), and visibly use the status you collect to
report on and run your project.
226

When people claim that they are too busy to provide status updates 227
Dealing with Slackers: Sticks
It is always better to get results through praise than through punish-
ment, but that may not always work. If some of your team members
are completely uncooperative despite your best efforts, warn them that
future project reports will begin to include a note highlighting their
missing input. If the warning does not improve matters, add a ‘‘red stop-
light’’ problem indicator to the list of current project issues, along with
an objective description of the status collection problems you are
having.
In extreme cases, you may also need to consider escalating the mat-
ter to the individual’s manager (or to your manager, if your problem
contributor reports to you). Escalation over something like this that
seems minor may appear to be overkill, but a lack of cooperation with
status reporting can be a leading indicator of more significant behavior
or performance problems.
Seeking Alternatives
Another thing you may want to consider, particularly if your current
process is not as effective or straightforward as you would like, is
rethinking your status process. There are situations in projects where
progress on principal activities is directly visible to you. If it is more
expedient, pull the information together yourself and show it to your
task owners for a quick review. Remember, it’s your project and without
adequate status you cannot do your job. Even if you end up adopting a
process that is somewhat harder on you, it might be your best choice
for staying on top of what is happening in your project.
There may be cases where getting help in collecting status will
improve cooperation. If you have several people at a remote site, you
might be able to enlist the help of someone there to assemble all of the
information and send it to you. On large programs, there may be people
on the program staff who are in good positions to easily assemble status
for projects and functions. Consider any options for status collection
that are effective and minimize the overall effort and overhead.
There may also be practical options for automating the status col-
lection process. Consider Web-based tools or survey techniques to
streamline your process. If people are already using online time tracking
or other computer-based systems, investigate if there are options to use
them to facilitate your project collection status.

Control Topic
92. How can I effectively manage
projects where the staff is managed
by others?
Getting project results when you lack authority over members of your
team is a big challenge for most project leaders. It begins with establish-
ing and maintaining good relationships and trust, as described in Prob-
lems 41 and 42. You can also use process, influence, and metrics to
better stay in control of your project.
Building a Foundation of Trust
Good project management depends on effective teamwork, so strive to
establish a friendly working relationship with each of your team mem-
bers. To maintain trust throughout your project, practice integrity and
credibility—mean what you say, and deliver on what you say you will
do. Open and honest relationships provide the solid foundation that you
will need to get through the bumpy parts of your project.
Inluencing Others
Even if you do not directly manage some of your contributors, your
influence on them can be substantial. Some of your influence results
from your position as the project leader. You have some ‘‘position’’
power based on the fact that you were selected to lead the project by
an influential sponsor. You may also have the support of powerful stake-
holders and others who want the project to succeed. The vision and
purpose of the project may also be an important factor for your team
members, so keeping the reasons you are all undertaking the project
visible will enhance your influence. Discussing the project with the man-
agers of your contributors will assist you in enlisting their support,
which can augment your leverage in dealing with your team. Finally, one
very effective way to gain influence is to ask for it. As the project leader,
look your individual staff members in the eye and request that they
cooperate and commit to the project. If they agree, they will be provid-
228

How can I effectively manage projects where the staff is managed by others? 229
ing you with some influence and authority over them. Your actual clout
will probably still not be very substantial, but your apparent authority
may be sufficient to keep your project moving (if you don’t abuse it).
You also have the ability to offer and deliver things people appreci-
ate in exchange for their cooperation. You may assume you have little to
offer, but that’s not so. As the project leader, you can provide desirable
assignments, training opportunities, responsibility, praise, recognition,
and much more. You can do favors for people, either in exchange for
things you need now or against future situations where you will need to
call them in. Giving and getting are fundamental to human interactions;
effectively using the principles of reciprocity can provide you with sig-
nificant influence and control over your project.
Documented processes are another technique that project leaders can
use to control their work. Start each project with a discussion of meth-
ods to be used, focusing on those needed to avoid problems on past
projects. Take advantage of recent memories to gain buy-in for project
processes that will help you maintain control. Take full advantage of any
useful processes that are recommended or mandated by your organiza-
tion. Collect explicit buy-in from your team members to follow good
project management processes, and use their agreement to guide the
work on your project. You will find additional suggestions on process
adoption in Problem 12.
Using Measurement
As your project progresses, one additional tool you have for control is
the power of the pen. In your reporting, you will include metrics on
project progress, such as objective data on progress and results. Mea-
surement drives behavior, so you can use positive data to recognize
and reward accomplishments. Negative information that you report (or
threaten to report) can be a powerful aid in helping you control your
project.

Control Topic
93. How can I minimize unsatisfactory
deliverable and timing issues when
outsourcing?
Satisfactory outsourcing of project work begins with a good selection
and engagement process, as described in Problem 29. To keep things
under control, you need to set and enforce contract terms and commu-
nicate effectively.
Establishing Contract Terms
Seek contractors and vendors who have experience and a history of
accomplishments that will justify your confidence in their ability to exe-
cute. Check references and ask about prior work. Where possible,
request work samples to evaluate their quality and suitability for your
needs.
Once you have selected an outsourcing partner who you believe
could meet your project’s requirements, develop contract terms and
conditions that will maximize the likelihood that your vendor will
deliver what you need. Review the contract thoroughly for clarity on
deliverables, dates, and key requirements. Clearly define the process to
be used or any changes or contract amendments. Ensure that payment
terms are unambiguous, and consider adding incentives and penalties
aligned with your project’s objectives. Tie all payments to tangible
results delivered and explicit progress measures. To manage budget
risk, avoid ‘‘time and materials’’ pricing in the contract.
Minimize the inclusion of any specialized or unique terms that will
require extensive legal or management review and hold up contract
approval. Once the terms are set, obtain all the necessary signatures
and get to work promptly.
Communicating Effectively
Establish a good working relationship with any individuals who will
work directly as part of your team and others in their organization with
230

How can I minimize unsatisfactory deliverable and timing issues? 231
liaison responsibilities. Meet with the people you will work with face-to-
face at least initially, and set up weekly one-on-one discussions with
your principal contacts. Use both formal and informal communications
to build trust and collegial relationships. Involve all of the contract
workers on your project staff in your planning and other project meet-
ings whenever possible; make them as much a part of your team as your
organizational policies will permit.
Establish an effective routine for collecting status at least weekly.
For status, don’t settle for ‘‘Things are going well.’’ Verify progress as
you proceed using interim deliverables such as documentation, inspec-
tions, prototypes, pilots, mock-ups, models, and testing. Be scrupulous
about monitoring that work is being completed as documented in the
contract.
Use the contract terms for incremental payments to ensure that the
work, especially work performed where you cannot observe it, remains
on track. When payments are due or invoices are received, verify that
the work is satisfactory. If it is, approve the payments promptly.

Control Topic
94. How should I manage reviews for
lengthy projects?
For most projects, you can plan about six months into the future with
reasonable confidence. Beyond this planning horizon, things can
become somewhat murky, so longer projects require periodic planning
reviews. These reviews are to revalidate the objectives and project
plans and are also good opportunities to audit processes and reinforce
teamwork.
Reviewing Plans
To keep plans and expectations current on long-duration projects,
schedule a planning review about every three to six months. The best
times for reviews are at project decision and transition points, such as
fiscal boundaries, major milestones, the ends of life-cycle phases, and
staffing changes. Involve all of your core project team in the review, as
well as others who should contribute to your planning. Plan to hold
project review meetings face-to-face whenever possible, especially if
you have a distributed project team.
The duration of a plan review will vary, from a few hours for a proj-
ect undertaken by a small colocated team to several days for a major
program. Your agenda will be similar to that for a project start-up work-
shop, focusing on planning and shared understanding of the project.
Begin with a review of the overall objectives and the project charter to
reinforce what you are attempting to accomplish. Also focus on detailed
planning for upcoming work, with particular emphasis on specific deliv-
erables, activities, assignments, estimates, and dependencies. Discuss
any changed assumptions or constraints, and determine how any
changes will affect the project. Also, include a risk review during the
meeting to identify and deal with new threats and potential problems.
Follow up the review by updating all affected project documents,
and bring all the information in your project management information
system up-to-date. If your review results in major project changes, pre-
sent them to your sponsor. If necessary, get your sponsor’s approval
and reset your project baseline.
232

How should I manage reviews for lengthy projects? 233
Checking Your Processes
Use your review to conduct a mini ‘‘lessons learned,’’ and take a
moment to think about your recently completed work. Identify good
practices that worked so you can repeat them. Also examine any recent
difficulties, and consider changes you need to make to avoid similar
issues in your upcoming work. Problem 75 discusses implementing mid-
project process changes.
Recharging Your Team’s Batteries
Long projects can become boring and result in lowered motivation. A
project review is a great time to remind people why the project is impor-
tant and to recognize major accomplishments. Use the occasion to
reconnect people to the project and to build and maintain the teamwork
and trust you’ll need in the next phase of the project. Use the meeting
to explicitly thank your contributors for their past work. If possible,
schedule some time for a team event during or immediately following
the review.

Control Topic
95. What should I do to establish control
when taking over a project where I was
not involved in the scoping or planning?
Sometimes you must assume leadership for a project that someone else
started. To do this well, you must keep things going while you maintain
(or establish) team cohesion, review and update the plans, and get to
know your stakeholders.
Keeping the Plane in the Air
When you are tossed into the middle of a running project, your first
order of business will be to keep it going. Some projects needing a new
leader are in good shape, because the former leader’s departure had
nothing to do with the state of the project. Other projects, however,
may need serious attention to correct problems, and this can be true
even for some projects that appear on the surface to be running
smoothly. Whatever your initial impressions, you will need to rapidly
assess what people are doing and, unless you detect serious issues,
keep them doing it. If there are adequate documents and plans available,
quickly use them to do a thorough cycle of status collection to identify
any significant variances. If the planning information is thin or nonexis-
tent, meet with each project team member to discuss what he or she is
up to and plans to do next. Document what you learn and prepare a
status report summarizing the state of the project.
Establishing Relationships and Teamwork
Schedule time with each assigned contributor to meet one-on-one and
get to know each other. Discuss roles and responsibilities, and begin
building trust. When you inherit a project with a team that’s already in
place, you’ll want to do this fast. Accelerate the process by discussing
any past associations or colleagues you have in common with your con-
tributors, and use these connections to help you quickly establish rela-
234

What should I do to establish control when taking over a project? 235
tionships with your new team. Other ideas to help with this can be found
in Problem 34.
Making the Plans Your Own
Regardless of how good the project plans and other documentation that
you inherit appear to be, you will need to thoroughly review them, and
update them as necessary to create plans that you understand and
believe in. On one of my earliest projects, I was asked to step in as leader
shortly after a project had begun. I foolishly accepted the planning infor-
mation I was handed, and I began running the project. The project in
fact had unrealistic deadlines and assumptions that were not credible.
By the time I realized my error several weeks into the project, I was in
the midst of an ugly mess, with people arguing and fighting, and having
to work huge amounts of overtime to even come close to the stated
goals. Had I initially verified what I was told, we would have avoided
much of this grief. Although ultimately the project ended ‘‘successfully,’’
by the end there was so much scorched earth and bad feeling that it
taught me a lesson I will never forget.
To make the time you need to review (or create) plans, you may
need to delegate some day-to-day leadership tasks temporarily to one of
your contributors. As you work to come up to speed this may be for the
best anyway, because a senior person on your new team may well know
a lot more about the project than you do. Begin your review by assess-
ing the project requirements. Meet with the project sponsor and discuss
the requirements and the overall project objective. Ask your sponsor
about project stakeholders and how they connect to the project. Note
any obvious holes, ‘‘fuzziness,’’ or conflicts that you detect in your
review or during any of these discussions.
Next, start to inspect any existing plans. Using the status informa-
tion you have collected and any existing plans, validate that all work
marked completed is in fact done. Identify any issues and gaps in the
planning, and verify ownership of all upcoming work. Involve all your
project contributors in your reviews, and invite people to critique the
plans and update them to reflect the work that actually remains. It may
be helpful to organize a project review (as described in Problem 94) to
assist you in verifying (or building) the plans.
In the process of reviewing your plans, also quickly review the over-
all project management processes in use. If they appear satisfactory,
plan to live with them. If you detect any significant problems, note the
issues and make it a priority to deal with them soon.

236 What should I do to establish control when taking over a project?
Adjusting Expectations
If you detect significant problems in your requirements analysis or plan
review, meet with your sponsor to discuss them. If you find that signifi-
cant changes are necessary, use your data to negotiate them and reset
your project baseline to be realistic. Problem 78 covers principled nego-
tiations and dealing with unrealistic project constraints.
Following your discussions with your sponsor, reach out to your
stakeholders to gather their perspectives on the project. When you
meet, present any changes that will be necessary. Discuss the objectives
that you are pursuing and talk about their expectations for the project.
Work to gain their confidence and support for you as the leader for the
remainder of the project.

Tools Topic
PART 7: TOOLS
96. What should I consider when
adopting technology-based
communication tools?
Some of the purposes served by remote communications are explored
in Problem 71, and Problem 72 focuses on how best to communicate
globally. This problem outlines some communications tools for voice,
computer networking, video, and electronic messaging, including some
of their advantages and disadvantages.
Using Voice Communications
Audio teleconferencing is ubiquitous and inexpensive. Project teams
make extensive use of it to meet with distant team members and others.
It has many advantages: It requires no special equipment, it is easy to
set up, most organizations have permanent infrastructure for it, and
commercial services are also widely available and inexpensive. The
principal disadvantages are that it’s not as effective as face-to-face com-
munications, and it can be very hard to keep people’s attention for meet-
ings lasting more than an hour or so. This is especially true for people
who participate in meetings using regular telephone handsets where
most of the discussion is in a room using a speakerphone.
There is also increasing use of mobile phones and ‘‘Web phone’’
software on projects these days. Both technologies increase the options
for timing and locations available for telephone connections, and they
may significantly lower costs. Unfortunately, these technologies also
often represent significant reductions in audio quality and reliability. If
you find this to be a problem, discourage their use for important calls
and regular meetings.
Using Computer Networking
Another commonplace technology for remote meetings is Web-enabled
sharing of computer displays. There are two primary types of technol-
ogy for this: one supporting dynamic display sharing among a small
237

238 What should I consider when adopting technology-based communication tools?
number of workstations, and another that requires setup in advance
and is capable of showing a single display on a large number of other
computers.
For a small project team or where people can gather in a limited
number of locations, dynamic ‘‘network meeting place’’ software is an
effective way to allow everyone to see what is on remote computer
screens and permit a succession of people to ‘‘drive’’ the meeting. The
cost of this sort of communication is very low, as it is often available as
part of standard workstation infrastructure. Most of these applications
can serve at least a half dozen workstations pretty well, but as the num-
ber grows the overhead and slow response starts to interfere with the
effectiveness of this technique. It’s useful for sharing documents,
graphs, and other visual materials that are already computer based but
can be inconvenient for other images, and it’s ineffective for showing
participants’ faces.
For presentations that are mostly broadcast, one-way communica-
tions, the other type of ‘‘webinar’’ application software is more appro-
priate. Dozens or even hundreds of computers can simultaneously see
what is being presented, but the shared screen needs to be set up in
advance and is limited to one workstation, or at best a small number.
This technology is very effective for periodic ‘‘all hands’’ program meet-
ings, where most of the information used to inform a large community
of remote contributors can be prepared in advance. There may be costs
involved with setting up and running meetings with this software; if so,
plan for the estimated expense in your budget. For the receiving partici-
pants, normally only a Web browser is required, but in some cases the
computer used for presenting may need special hardware, or at least be
running application-specific software. This style of Web-enabled sharing
can also be set up to support at least low-resolution images of the pre-
senters if the central workstation is equipped with cameras and appro-
priate switching capability.
Whichever type of Web-sharing software you are planning to use,
test the connections in advance, especially for distant participants. If
any of your contributors are not inside the network you plan to use,
arrange for the access that they will need in advance to negotiate fire-
walls and other security barriers.
Using Video Communications
Videoconferencing is also becoming fairly commonplace. It provides the
same ‘‘real-time’’ conversational support of audio conferences, but also

What should I consider when adopting technology-based communication tools? 239
some of the interaction of face-to-face meetings by showing images of
the participants. When the video quality is high enough, the experience
can approximate an in-person meeting, but most setups fall far short
of this. Using the highest-quality video equipment and rooms for team
meetings may be inconvenient to arrange and does consume time for
travel and setup. Even in organizations where there is a well-established
network of specialty video rooms, the project may bear significant
direct expense to use it. If so, budget for the costs if you plan to take
advantage of these facilities.
Video setups also add to your facilitation overhead. The need to
point cameras, switch back and forth from presentation slides and other
visual information, and monitor what is sent and received may add sig-
nificant distractions to your meetings, especially if you need to do all of
this and lead your meeting. If the pitfalls of videoconferencing appear to
exceed its value, consider more convenient audio options combined
with computer networking to realize many of the same results.
Workstation-based ‘‘videophone’’ applications are also becoming
more popular for point-to-point communications. If you have the right
hardware and sufficient network bandwidth to support it, this can be a
useful way to add your smiling face to regularly scheduled one-on-one
meetings with distant staff. The size and picture quality of the images
may leave something to be desired, but video calls can nevertheless add
a useful dimension to your individual interactions.
Using Electronic Messaging
Most important electronic messaging for projects remains in the domain
of e-mail. E-mail is the foundation for most complex communication for
distributed teams, because it provides an audit trail, it’s reliable and
easy to use, and it does not require that the sender and receiver of the
messages both be active at the same time. It is an essential tool for
following up on conversations, discussions in meetings, and other com-
munications where things could easily be forgotten or overlooked. Writ-
ten communication does have significant drawbacks, however. What
you write can be easily misinterpreted, especially when it contains emo-
tional content—or even seemingly emotional content. Studies of human
communications conclude that the vast majority of meaning in a face-
to-face exchange comes from the body language and emphasis used in
speaking, with only a small portion being carried by the words. When
sending an e-mail or other message, all you have are the words. Review
all your e-mails (and other writing) carefully for clarity and complete-

240 What should I consider when adopting technology-based communication tools?
ness, and reconsider carefully any portions that could be misinter-
preted or interpreted as criticism.
To maximize the utility of e-mail communications, establish stan-
dards to increase the visibility of important information and decrease
clutter, particularly if you are leading a large team. Define code phrases
or sets of symbols to be used in subject lines to identify time-sensitive
communications, and establish ground rules for marking messages
‘‘urgent.’’ Also set guidelines for using ‘‘reply to all’’ on broadcast mes-
sages (in general, never reply to all), and maintain centralized distribu-
tion lists for key functions to ensure that the most current list of
recipients will be used when sending crucial information.
Today’s technology also provides a blizzard of newer ways to con-
nect one-on-one with others in real time, including mobile text messages
and computer-based instant messaging. There are also endless varia-
tions these days on social networking. All of this can substantially
increase your ability to connect with your team members who embrace
these communications. Before diving too deeply into their use, though,
investigate what your team members will accept and won’t find annoy-
ing. Your goal is to build trust and improve relationships, not to drive
people away. Establish guidelines and etiquette for any techniques you
do decide to adopt. Avoid interrupting people too often with your com-
munication, and be mindful of potential distraction when you know they
are deep in thought. People take about twenty minutes to return to full
mental ‘‘speed’’ following an interruption, so use messaging (and tele-
phone calls) sparingly if you are expecting your contributors to get
much work done. As with phone calls, plan to follow up anything you
transmit that is complicated with an e-mail to provide a permanent
record.
Also, before adopting any new messaging technology, review the
boundaries set by your organization for acceptable communications
technology. Always observe established guidelines for security, confi-
dentiality, and protecting proprietary information.

Tools Topic
97. How should I select and implement
software tools for project documentation,
scheduling, and planning?
The tools available to help project leaders do their job range from very
low tech to expensive, complicated computer applications. Communica-
tions tools are discussed in Problem 96, and considerations for tools
applicable to large, multi-team programs are covered in Problem 98. The
focus here is on selecting tools for planning and for managing informa-
tion on typical projects.
Choosing Scheduling Tools
For very small projects, even the lowest-capability computer-scheduling
tools may be overkill. A combination of diagrams on easel pages, yellow
sticky notes for your work breakdown structure and activity network
modeling, and a suite of standard office software applications should be
more than enough to understand, plan, and track a mini-project.
For midsized projects, though, with dozens of activities and several
months’ duration, computer tools become more appropriate. Computer
tools fall into two categories: low-end software with modest capacities
for single users, and higher-capability, server-based products for larger
projects and programs supporting multiple users.
Low-end products have several significant advantages, including
lower cost, minimal hardware requirements, a modest learning curve,
plentiful training opportunities, lots of available examples and tem-
plates, and many other people who use the software and can serve as
mentors. There are also disadvantages for lower-end tools. They have
limited capacity, so they do not deal as well with large projects having
hundreds of tasks. Because they are stand-alone applications running
on a single computer, linking related projects is strictly manual and can
be difficult to keep up-to-date. Also, while low-end tools do an adequate
job supporting duration estimates, task dependencies, and critical path
analysis, their capabilities for resource analysis and effort tracking are
generally rudimentary and difficult to use.
For larger projects or programs with many cross-project dependen-
241

242 How should I select and implement software tools?
cies, the higher cost and steeper learning curve for more capable tools
may be justified. Such tools provide more robust resource modeling,
and many have additional features such as Monte Carlo risk analysis.
Because they are server based, though, there may be access and
response time issues for global projects. Offline capabilities are also an
issue for these products, even for display and reporting purposes.
The primary consideration for choosing a tool for most projects,
though, is alignment with peers, associated projects, and organizational
standards. You are always better off using a tool that fits with your envi-
ronment than picking one that might be nominally superior but that
puts you out of sync with the folks you need to work with.
Managing Information
For very small projects, a file server or even a rudimentary Web site
might be sufficient for your information storage needs. (For old-school
project leaders managing a co-located team, a project file or notebook
may even be enough.)
For typical projects, though, collaboration tools for file sharing and
network storage are commonplace. Your principal objectives are to
establish a well-organized project management information (PMIS) sys-
tem and to ensure your team members have good access to it. Problem
33 describes the main considerations in setting up a PMIS. In most situa-
tions, the capabilities available to you will be chosen at the organization
level, though you may have some choices available. At a minimum,
you’ll need functionality that provides file storage in a hierarchy of fold-
ers. You will also want to have the ability to fine-tune access and secur-
ity settings so not everyone on the project has the same ability to
update files. It’s best to restrict the ability to delete files to a very small
number of people, perhaps only yourself. Automatic version mainte-
nance is useful to ensure that you have a good history base for your
lessons-learned analysis and for later reference. Other desirable fea-
tures include network-based list and calendar functions, e-mail alerts to
inform you of updates, and the ability to post news items on a main
access portal page.
If your organization has high-capability knowledge management
software available, consider using it for your project PMIS. You will find
more on high-end knowledge management systems in Problem 98.

Tools Topic
98. What should I consider when setting
up software tools I will be using to
coordinate many interrelated projects?
Depends on:
g Regulations and industry standards
g Organizational requirements
g Program management office (PMO) recommendations
Managing Program Information
Large programs are typically subject to a lot of rules and guidelines.
Assess all the information requirements that your program will need to
comply with, and determine how you plan to meet them. If there are
significant long-term requirements for providing permanent storage of
project data related to health, safety, environmental, or other legal obli-
gations, plan to establish (or take advantage of existing) infrastructure
to conform. Estimate any necessary costs and include them in your
resource plans and project budget. If your program is expected to
observe any organizational or PMO requirements, determine how best
to deal with them, too.
Large programs generate a great deal of information. Setting up an
effective project or program management information system (or PMIS,
as described in Problem 33) is essential for control and coordination of
ongoing work. Organize your online data so that your distributed proj-
ect team members can easily find what they need.
If the information infrastructure available to you appears inade-
quate or you will be establishing a knowledge management hierarchy
from scratch, investigate options that will provide advanced capabili-
ties to increase utility and ease of use. Consider software products that
provide for multiuser check-out/check-in, coordinated updating, auto-
mated version maintenance, alias naming capability that allows informa-
tion in a single file to be accessed from several places in the hierarchy,
‘‘key word in context’’ searching, tailored security, and other advanced
access functions. More basic offerings can provide hierarchical network
243

244 What should I consider when setting up software tools?
folder structures and some access security and control, but such mod-
est capabilities can present problems for large, complex programs.
Document your program’s staffing hierarchy clearly using a well-
organized roster containing an up-to-date list of all the contributors
involved in your program. Include roles, responsibilities, project affilia-
tions, and full contact information for everyone, especially for the proj-
ect leaders, program staff, and subject matter experts.
Delegate responsibility to an owner at the program level for manag-
ing the information in your PMIS and for supporting all of your users.
Ensure that your program team has sufficient expertise in all the techni-
cal tools you are using, and will be able to provide adequate support to
all program contributors. Work with the vendors of your software tools
to keep your versions current. Coordinate any upgrades or changes
required so they will not disrupt your program.
Coordinating Program Plans and Monitoring Progress
Work to establish access and use of common computer scheduling tools
for all the projects within the program. Provide planning templates and
involve program staff in project startup workshops and planning meet-
ings to ensure overall consistency.
Adopt computer-based project management software that can sup-
port the size and other requirements of your program, and ensure that
it is sufficiently compatible with the corresponding tools used by all of
the project leaders. Using centralized, high-end tools for this can have a
number of advantages, as outlined in Problem 97. If you choose to adopt
a sophisticated project management tool, provide adequate training for
all users and establish adequate expertise on your program team to keep
things running smoothly, and provide advice and mentoring to others.
Realistically assess the costs and effort required, and budget accord-
ingly. In addition to the costs, consider the processes, both automated
and manual, that you will need to establish and maintain to synchronize
your hierarchy of plans and schedules. Server-based, centralized pro-
gram tools can also support online time tracking and resource monitor-
ing. If you plan to take advantage of this, estimate the time required to
set up the database and include it in your plans.
Also standardize your processes for status collection and reporting
throughout your program. Use compatible formats for data collection,
and coordinate project-level reporting with program reporting to ensure

What should I consider when setting up software tools? 245
consistency. If you plan to assemble status data online by collecting
inputs using a high-end project management software tool, set up the
information on activities, projects, resource categories, and other data
in the database. To facilitate its use, provide adequate access and train-
ing for all program contributors.

Closing Topic
PART 8: CLOSING
99. How should I realistically assess the
success and value of my project
management processes?
Measuring project success can be a surprisingly difficult and confusing
topic. Because by definition projects are all different, direct compari-
sons are perilous. Also, it’s never easy to reach agreement on exactly
what project ‘‘success’’ is. The most common interpretations of project
success relate to the ultimate value of the deliverable. What your proj-
ect results are worth depends on quite a few factors, most of which
are completely out of your control and have little to do with project
management. That said, there are useful ways to evaluate your project
processes, and delivering value is both more likely and a lot more effi-
cient when you manage your projects well.
Measuring Variance
At the end of a project, there are many actual numbers to compare with
the estimates and other forecasts you made earlier. Comparing
achieved performance with predictions provides useful feedback for
fine-tuning your processes and improving the precision and accuracy of
future project plans. Comparing duration and cost estimates with actual
performance will show you where your estimating processes are work-
ing and where they are wildly inaccurate. Overall, comparing any pre-
dictive metric from your planning process with the corresponding
retrospective measure from the completed work will help you decide
which project processes to keep and which to fix.
Similarly, comparing your scope, final costs, and finish date with
your committed project objectives may be a useful way to assess your
processes overall. This is only helpful if your objectives were based on
bottom-up, plan-based data, though. If your project objective was a wild
guess or, even worse, a ‘‘stretch goal’’ yanked out of the air by some
upper-level manager, you have a big ‘‘compared to what?’’ problem. If
your project objectives were not credible, then project-level compari-
sons won’t reveal much beyond the fact that you have inept high-level
247

248 How should I realistically assess project management processes?
management. Although the numbers can tell you a lot, project assess-
ment is really about more than just achieving ‘‘scope, time, and cost.’’
Assessing Teamwork and Satisfaction
Most projects exist in a small world. A succession of projects will tend
to be done with many of the same team members, for the same manage-
ment, and in support of the same stakeholders and customers. Some
indicators telling you how well you are doing from an interpersonal
standpoint are objective measures, and some are more subjective evalu-
ations.
A measurable indication of successful teaming is low turnover. For
a particular project team this should be a relative measure, because
people leave for many reasons. If your track record for retaining people
is good compared with that of other project leaders, you are probably
doing most things right. More subjective signs that you’re an effective
team leader are a minimum amount of ‘‘burnout’’ at the end of your
projects, and a willingness on the part of your team members to work
with you again on a future project.
Customer satisfaction is also important for successful project man-
agement. Some projects use a postdelivery survey to assess customer
and stakeholder satisfaction. If you do this regularly, you can also track
results over time. Other indicators showing that you are doing well are
stakeholders who remain friendly and are still speaking with you at the
end of the work, and customers who return to you with their next
requests and new projects.
Your management and sponsor also get a vote. If your annual job
appraisal is positive, it’s likely that you are performing well. You can also
tell something about the success of your projects from the comments,
rewards, and recognition you (and your team) receive. If you are not
getting much feedback from your management, approach it and request
it—whether you are seen as doing well or not, it’s always best to know.

Closing Topic
100. What are good practices for ending
a canceled project?
Not every project ends as planned. There are many reasons for projects
to end prematurely, but there is value to be realized even when you
can’t deliver the results expected. It is often said that good project man-
agement comes from experience. Canceled projects are a rich source of
experience, so you should use it. Also, you need to take care of the
people who have been involved as your paths may cross again.
Documenting What Happened
Whenever a project ends early, assess the state of your deliverables and
work with your stakeholders to determine if anything you have pro-
duced can be used as it is, or could become useful with small incremen-
tal effort. Turn over the deliverables (or partial deliverables) that you
are able to finish, and request acknowledgment and approval from your
stakeholders.
It’s good practice to do a final project report for all projects, even
ones that are canceled. Summarize what was accomplished in your
report and name the individuals who contributed to your results. Objec-
tively describe why it was decided to end the project, and provide a
final status summary. Archive all your project data, updating plans and
other documents to reflect your current status. Not only will this sup-
port your post-project analysis, but it will also facilitate possible
resumption of the project down the road or any follow-on efforts that
will benefit from your experiences.
Hold a post-project retrospective meeting, involving as many of
your contributors as possible. If convincing people to participate proves
to be difficult, take advantage of the ideas in Problem 101, emphasizing
the opportunity to discuss what happened openly and put it behind you.
In your analysis, start with processes that worked and results you were
able to achieve, so you can benefit from them on future projects. Next,
focus on identifying changes that might have enabled you and your team
to better deal with problems and issues you ran into. Also document
any significant risks encountered on your project that may affect other
249

250 What are good practices for ending a canceled project?
work. Prioritize the changes you recommend and work to implement the
best of them.
Recognizing Individual Accomplishments
Whatever the reasons for a project being canceled, meet individually
with each person involved to thank him or her personally at the end of
the project. If specific rewards and recognition are available and appro-
priate, seek or recommend them. For team members who work for oth-
ers, send a note to their managers describing their performance and
accomplishments, emphasizing the positive.
Also meet with your stakeholders and sponsor for a project debrief.
Discuss expectations, met and unmet, and explore what you could do
differently on a future project to ensure a better conclusion.
Even for projects that crash and burn, schedule and hold a small
team event at the end. If your organization will not support it, fund it
yourself or have a ‘‘pot luck’’ where everyone brings something along to
eat and help celebrate. It’s a small world, and it’s quite likely you will
work with the same people again. Strive to end things on a high note so
that your next project will start without ill will or bad feelings.

Closing Topic
101. How can I motivate contributors to
participate in project retrospective
analysis?
Once a project is finished, people tend to want to move on to the next
thing. Also, assessing lessons learned requires yet another meeting, and
most people hate meetings. To get past this, you’ll need to supply a
compelling answer to the question ‘‘What’s in it for me?’’ If you have
reluctant contributors, point out personal, project-oriented, and organi-
zational benefits to gain their commitment to participate.
One definition of insanity is doing the same thing over and over
expecting a different result. Project retrospectives are a powerful oppor-
tunity to find and change the things that lead to undesirable results.
Focusing on the Personal
Most projects have tension, crisis, drama, and at least a bit of chaos.
One of the purposes of a project ‘‘postmortem’’ is to help people put
this behind them and shed most of this baggage so they can approach
their next undertakings with a good attitude and an open mind. Dis-
cussing what went well on a project highlights the positive, and it pro-
vides a good opportunity to give credit for achievements and
accomplishments.
Discussing what could have gone better also can be constructive,
especially if your intent is to identify needed changes. Confronting
annoyances and problems openly provides catharsis, a release of feel-
ings that people may be bottling up inside. Kept inside, they will affect
attitudes and behavior. Simply providing an opportunity to voice them
goes a long way toward diffusing emotions. Some things that come out
may seem trivial in retrospect, and others may be things that you can
easily change on future projects. People may feel better even about
the things that appear out of your control after they have had a chance
to discuss them. Your role as a project leader is to let all the partici-
pants vent and to keep everyone focused on the process and potential
remedies instead of character assassination and ‘‘blamestorming.’’
251

252 How can I motivate contributors to participate in project retrospective analysis?
Building Better Projects
The most frequently cited reason for post-project retrospective analy-
ses is to capture lessons learned. If you analyze projects routinely and
act upon what you discover, your next projects will be shorter and more
efficient. This is better for everyone, because it will drive process
improvements that will result in future projects with less chaos, frustra-
tion, and confusion. To make unenthusiastic team members more inter-
ested in meeting to capture lessons learned, commit to doing something
about the primary recommendations that emerge from the meeting.
Commit in advance to either act on them or propose their implementa-
tion to your management.
On a very large program where I was responsible for the retrospec-
tive analysis after each phased release, the program management team
committed to implementing the top three recommended changes from
each quarterly implementation. This resulted in broad and willing par-
ticipation, and it led to substantially better overall control and a good
deal less confusion. Most people will willingly participate if they know
that their efforts will not be ignored.
Helping the Organization
Even at the organization level there can be significant benefits for the
individual. Increased efficiency will lead to a healthier overall business,
and success leads to better job security, growth, and opportunities for
advancement. The benefits of disciplined post-project analysis also
include organizational learning, and the work environment is more sta-
ble and a lot more pleasant when there is a solid base of intellectual
capital. In addition, focusing on accomplishments and good results pro-
vides visibility for your contributors that can be used to identify new
project leaders and subject matter experts for future projects.

Index
absence from project, managing,
176–177
accomplishments, recognizing, 91
action items
assessing actual performance,
130–133
holiday impact on duration,
134–135
sequencing, 136–137
status visibility, 166
activity-level estimating, 123–125
actual cost (AC), 132
adversaries, confronting, 59–60
agenda
for launch meeting, 62–63
for meetings, 92
regional/cross-functional, recon-
ciling competing, 56–58
aggregations of activity-level metrics,
131
agreement, on project objective, 10
alliances, 60–61
approach, choosing, 8–9
archiving information, 11, 66, 81
for programs, 113
prohibiting deletion, 82
around-the-clock staffing, 207
‘‘as is’’ processes, preserving
effective, 48
assignments, closing, 167
audit trail, for communications, 181
automatic version maintenance, 242
availability, assessing potential, 121
253
baseline
management demands after setting,
212–213
negotiating, 196–198
protecting, 209
bidding for work, reasons to decline,
183
big projects, decomposing, 64–65,
115–116
bonding, with team members, 11
bottom-up estimates of costs, 125
Boy Scouts of America, 6
brainstorming, 222
budget for project, 44
canceled project, ending, 249–250
Capability Maturity Model Integration
(CMMI), 14
certification in project management,
12–13
change
analyzing and managing, 11
anticipating, 48, 219
assessing need for, 189
and funding, 75
making good decisions, 213
managing, 215–216
to meet project deadline, 187
to objectives, 209–211
planning, 189–190
in schedule, 201–202
securing buy-in, 149–150
in software project, 34
change-control process, 210–211

254 Index
change processes, 28
establishing, 19–20
charter, 40
closing
assignments, 167
small projects, 22
collaboration, 83
commitment
of contributors, 103, 217–218
to decision, 225
for funding, 74–75
negotiating, 140–141
from part-time team members, 101
communications, 29
with contract workers, 230–231
establishing, 11
formal and informal, 105
global, 180–182, 208
in layers, 112
with managers of part-time team
members, 102
managing, 65–66, 93, 168–169, 193
for programs, 51
of progress, 44–45
on project status, 173–175
for remote contributors, 178–179
on simple projects, 22
with sponsors, 40, 41
technology-based, 237–240
complexity, 27, 50
managing projects with, 205–206
and planning, 28
of small project, 23
computer display sharing, 180
computer networks, for communica-
tions, 237–238
conflict management, in fee-for-
service project, 184–185
connections, between subprojects,
116–117
consensus building, 57–58
constraints, 195
contingency plans, 186–187
contract workers, 72–73
balancing customer and organiza-
tional priorities, 183–185
establishing terms, 230
managing, 99–100
contributors, 68
bringing new up to speed, 151–152
buy-in to status collection, 169
commitment from, 118–120
communications with remote,
178–179
as contract staff, 99–100
failure to complete tasks, 217–218
geographically remote, 95–96,
105–107
hostility or reluctance during start-
up, 59–61
impact of undependable, 103–104
involvement, 92
management by others, 228–229
as managers, 7
minimizing impact of scarce
expertise, 155–156
minimizing turnover, 161–162
overcommitments, 153–154
part-time, 101–102
participation in retrospective
analysis, 251–252
and project promotion, 97
recognizing accomplishments, 250
and status metrics, 170–172
too busy for status updates,
226–227
control, 65–66
when taking over existing project,
234–236
costs of project, 44
analysis for new technology,
148–149
estimating, 123
in make vs. buy, 69
start-up meeting, 63
critical path, 199–200

Index 255
currency of data, 81
customer expectations, 53–55
customer satisfaction, 248
customizing, processes, 88–89
cyclic life cycle, 17, 18, 33
day-to-day tasks, 37–39
deadlines
attention to, 165
missed, 103–104
overdue, 166
workload to meet, 186–188
decision process, 3
multi-site, 224–225
number involved, 221–223
degrees, in project management, 13
delegating work, 9, 35, 108–110,
121–122
deliverables
minimizing evaluation issues,
159–160
requirements for, 53
from small projects, 203
tangible or intangible, 33
dependencies
external, 139–141
interproject, 64
discontinuous projects, 36
distributed team, leadership, 205
documentation, 10, 25–26, 40
for canceled project, 249–250
of commitments, 140–141
on customers, 53
need for, 191–192
for potential controversies, 56
of processes, 229
revising for schedule change, 202
of scope, 54–55
for small project, 23
software for, 241–242
earned value (EV), 132
education, in project management,
12–13
efficiency
increasing, 93
maintaining, 94
electronic messaging, 239–240
emergencies, time for, 37
estimating
activity durations and costs,
123–125
activity durations impacted by
holidays, 134–135
improving quality and accuracy,
126–129
metrics for, 130–133
verifying, 128–129
ETVX (Entry, Task, Validation, Exit)
model, 140
EVM, 132–133
executing project, 41
expectations, 236
for sponsor, 41
experience, of teams, 83
expertise, minimizing impact of
scarce, 155–156
external dependencies, 139–141
extroverts, as project managers, 3
fast-track planning, for mini-projects,
21
favoritism, avoiding, 96
feasibility, 54
fee-for-service projects, balancing
priorities, 183–185
fitness, and make vs. buy, 69
fixed-date schedules, avoiding, 138
flexibility, 122
Ford, Henry, 90
formality, for small project, 23
funding
commitment for, 74–75
limited, and project completion,
76–77
securing and maintaining, 44–45
see also costs of project

256 Index
gaming of metrics, 170–171
geographically remote contributors,
95–96
informal communications, 105–107
global communications, 180–182, 208
global projects, team buy-in on, 97–98
goals, aligning with metrics, 171–172
guesswork in estimating, 128
Guide to the Project Management Body
of Knowledge, 15
hardware projects, vs. software
projects, 33–34
help, negotiating for, 76–77
Hewlett, Bill, 106
hierarchy
for program, 111–112
of schedules, 206
hiring, 72
holidays, impact on activity dura-
tions, 134–135
influence, 86, 228–229
information system, 11, 80–82, 242,
243–244
currency of data, 81
global, 181
security, 81–82
team need for, 193–194
see also archiving information
initiating programs, 65
initiating project, 40–41
small projects, 203–204
support in, 60–61
initiation into project management, 7
international dateline, 207
interproject dependencies, 64
interruptions in project process,
176–177
introverts, as project managers, 3
intuitive information, preference for, 3
investigation, funding for preliminary,
74
language, for status reports, 179
large projects, decomposing, 64–65,
115–116
large teams, managing, 111–113
launching project, see start-up
layered communications, 112
leadership, 11
and delegating, 9
by example, 85–86
of existing project, 234–236
for subprojects, 142
leadership vacuum, 85
learning, opportunities for, 68
lessons learned, 175, 252
life cycles, 17–20, 33
choosing, 19
metrics, 20, 131
limited resources, and project
completion, 76–77
limits, on number of projects, 35
‘‘make vs. buy’’ decisions, 69–71
management by wandering around
(MBWA), 106–107, 162
remotely, 178
measurement, see metrics
meetings, 66
avoiding too many, 163–164
cross-time-zone, 207
efficient use, 93
with geographically remote contrib-
utors, 105
objectives, 92
for project launch, 62–63
timing for, 179
mentoring, 8, 83
methodologies, 15
metrics, 229
aligning with goals, 171–172
contributors impacting, 170–172
for estimating, 130–133
mini-projects, 21–22

Index 257
mirror sites, for information system,
181
monitoring, 29
commitments, 141
project details, 168–169
small projects, 24
morale, 90–91
motivation, 118, 233
multi-site projects, managing, 205–206
Myers-Briggs Type Indicator (MBTI), 3
needs of customers, 53
negotiating
commitment, 140–141
contracts, 184
for help, 76–77
new processes, 67–68
adoption, 148–150
standardizing, 49
norms, 83
comparing plans to, 131
objectives of project, 10
changes, 209–211
measuring success, 247–248
negotiating, 195
for small project, 23
online information storage, 80
organization, 1
organizational needs, and make vs.
buy, 70
orphan activities, staffing, 119–120
outsourced project management,
99–100
avoiding, 46–47
minimizing unsatisfactory deliv-
erable and timing issues, 230–231
see also contract workers
overhead, avoiding increase, 92–94
ownership
assigning, 118–119
follow-through on tasks, 165–167
of orphan activities, 119–120
Packard, Dave, 106
paperwork, see documentation
part-time project management, 39
part-time team members, 101–102
peers, delegating work to, 109–110
personality types, 3
planned value (PV), 132
planning, 1, 76, 146
activity owners’ involvement,
123–124
for around-the-clock staffing, 207
for complex short projects, 28
programs, 65
and resource balancing, 157–158
reviewing, 232
small projects, 203–204
positive attitudes, 90–91
PRINCE (PRojects IN a Controlled
Environment), 14
priorities, 38, 176
balancing customer and organiza-
tional, 183–185
project tasks vs. regular work,
217–218
problems, anticipating, 186–187
process phobia, 30
processes, 34
for complex short projects, 28–29
coordinating improvements and
changes, 189–190
customizing, 88–89
establishing, 229
establishing required, 11
managing adoption of new, 148–150
new, 67–68
simplifying, 92
on small projects, 22
standardizing new, 49
team use of, 87–89
productivity, holidays and, 134
professional organizations, standards,
15

258 Index
program management
coordinating plans, 244–245
decomposition, 64–65, 115–117
hierarchy, 111–112
initiating and planning, 65
iterating plans, 143–144
maintaining connections between
projects, 116–117
maintaining integration, 144
planning subprojects, 142–143
and satisfied customers, 50–51
program office, establishing, 50–51
Project Management Body of
Knowledge (PMBOK), 15
project management processes
assessing success, 247–248
and staff management, 228–229
see also processes
Project Management Professional
certification, 12
project managers
qualities, 5–6
responsibilities, 10–11
technical background of, 3–4
see also leadership
project size
big, decomposing, 64–65, 115–116
and formalized structure, 8
initiating and planning, 203–204
small, 21–22, 35–36
small, formality for, 23
projects
defining, 145
formal approval, 74
promotion of project, 97
questions, 1
RACI matrix, 93
reciprocation, for project support, 98
regional/cross-functional agendas,
reconciling competing, 56–58
relationships
with contract workers, 99
utors, 95–96, 105–107
maintaining, 90
management by wandering around,
106
in new teams, 67
stress to meet deadline and,
187–188
when taking over existing project,
234
remote contributors, communications
for, 178–179
reorganizations, 219–220
repetitive projects, 25–26
reporting environment, establishing
safe, 170–171
reports, 173–175
request for proposal, 184
resources
balancing across projects, 157–158
overcommitments, 153–154
scarcity, 156
responsibilities, assessing, 38–39
retrospectives
assessing, 25
contributor participation in
analysis, 251–252
reviews, 93
for long projects, 232–233
schedule for periodic, 169
rewards, for contract workers, 100
risk, 75
identification, 186, 219
roles, 34
satisfied customers, program
management and, 50–51
schedules, 136–138
avoiding fixed-date, 138
change in, 201–202

Index 259
hierarchy of, 206
for large projects, 115–117
for periodic reviews, 169
slip in, 199–200
synchronizing with related partners
and teams, 142–144
‘‘scientific management’’ movement,
14
scope
creep, 209
documentation of, 54–55
management changes, 212–213
‘‘Scout Law,’’ 6
security, for information, 81–82
sign-off, for small project, 22
simplified process, for mini-projects,
21–22
skills analysis, 146
small projects
formality for, 23
initiating and planning, 203–204
mini-projects, 21–22
social networking, 181
software
for coordinating interrelated
projects, 243–245
for project planning, 241–242
software projects
cyclic life cycle for, 18
vs. hardware projects, 33–34
sponsors, 27–28
building support, 30–31
in controversies, 56–57
developing and maintaining, 40–41
and funding, 44
goals, 196
leveraging in global projects, 97–98
loss of, 42–43
in mini-project planning, 21
staffing, see contributors
stakeholders, 27–28
avoiding issues with new, 214–216
change proposals from, 210
consensus building, 57–58
in decision making, 224
in mini-project planning, 21
and project promotion, 97
standards, 15, 88
start-up
contributor hostility or reluctance
during, 59–61
two-day process, 62–63
status
of project, 173–175
of schedule, 200
status of action items
collection for follow-up, 165–166
contributors’ refusal to provide,
226–227
setting up effective collection pro-
cesses, 169
visibility, 166
status reports, 66
stealth-mode project management, 32
‘‘Straw-Silver-Gold’’ process, 143–144
structures in project management,
assessing, 14–16
subject matter expertise, 8
success, 11
support, maintaining, 27–28
tasks
day-to-day, 37–39
owner follow-through, 165–167
teams, 66
absence of authority over members,
228–229
anticipating staff changes, 151–152
around-the-clock staffing, 207
assessing, 248
balancing workload, 188
bonding with members, 11
cohesion, 79
commitment from members,
118–120

260 Index
teams (continued)
experience, 83
gaining confidence of, 7
utors, 95–96
global project buy-in, 97–98
information needs, 193–194
kickoff meeting, 63
leading distributed, 205
and make vs. buy, 70
managing large, 111–113
for mini-projects, 21–22
minimizing impact of scarce
expertise, 155–156
minimizing turnover, 161–162
part-time members, 101–102
relationships in new, 67
and schedule development, 137
size of, 84
support, 31–32
use of project management pro-
cesses, 87–89
technical background of project
managers, 3–4
technology
for communications, 237–240
complexity, 50, 205–206
managing adoption of new, 148–150
new, 67–68
telecommunications, 180–181
templates
for project plans, 21
for repetitive projects, 25
testing
minimizing late-project failures,
159–160
in software vs. hardware project,
34
time fragmentation, 5
time management, 37–39, 121
time zone issues, 207–208
timing, and make vs. buy, 70
top-down objectives for expense, 125
tracking, see monitoring
training, in project management, 8
trust, 90
universities, certification programs,
12
unknowns, dealing with, 146–147
vacations, impact on activity dura-
tions, 134–135
variance
measuring, 247–248
in schedule, 199
very small projects, 35–36
video communications, 238–239
videoconferencing, 180–181
voice communications, 237
waterfall life cycle, 17–18, 33
webinars, 238
weekend, and international dateline,
207
work breakdown process, 115–117
work breakdown structure, 168
work methods, and estimates, 126
working style, 5
workload, reassessing, 39

101 Project Management Problems And How To Solve Them

More Related Content

What's hot (20)

Similar to 101 Project Management Problems And How To Solve Them (20)

More from Amy Cernava (20)

Recently uploaded (20)

101 Project Management Problems And How To Solve Them