11.signaling for multimedia conferencing in stand alone mobile ad hoc networks

Network and Complex Systems www.iiste.org
ISSN 2224-610X (Paper) ISSN 2225-0603 (Online)
Vol 1, No.1, 2011

Signaling For Multimedia Conferencing in Stand-Alone Mobile
Ad Hoc Networks
Sudhakar Krishnan
Department of Computer Science & Engineering, Sengunthar College of Engineering, Namakkal,
Tamilnadu, India.
ksudhakar.cs@gmail.com

Rubini Pandu
Department of Information Technology, Gnanamani College of Technology, Namakkal,
Tamilnadu, India.
ruby_nila@yahoo.co.in

Abstract
Mobile ad hoc networks (MANETs) are infrastructure-less and can be set up anywhere, anytime. They can
host a wide range of applications in rescue operations, military, private, and commercial settings. Multimedia
conferencing is the basis of a wealth of “killer” applications that can be deployed in MANETs. Some
examples are audio/video conferencing, multiplayer games, and online public debating. Signaling is the
nerve center of multimedia conferences—it establishes, modifies, and tears down conferences. This paper
focuses on signaling for multimedia conferences in MANETs. We review the state of the art and propose a
novel architecture based on application-level clusters. Our validation employed SIP as the implementation
technology and OPNET as our simulation tool. Our clusters are constructed dynamically and the nodes that
act as cluster heads are elected based on their capabilities. The capabilities are published and discovered
using a simple application-level protocol. The architectural principles and the clustering operations are
discussed. Our SIP-based implementation is also presented along with the performance evaluation.
Keywords: MANET, SIP-technology, OPNET-simulation tool, cluster

1. INTRODUCTION

MOBILE ad hoc networks (MANETs) can be defined as transient networks formed dynamically by
a collection of arbitrarily located wireless mobile nodes, without the use of existing network infrastructure or
centralized administration [J. Liu and I. Chlamtac, (July 2004)]. They rely on wireless technologies, such as
IEEE 802.11 and Bluetooth, and are either stand-alone or connected to other networks. This paper focuses on
standalone MANETs. MANETs can host a wide range of applications in rescue operation, military, private,
and commercial settings.

Many of these applications involve multimedia conferencing. One example is an audio/video
conference in a rescue operation setting. After a natural disaster, there may be no communications
infrastructure. A conference in such an environment will allow first aid squads, ambulance services, police,
and other involved parties to communicate in order to facilitate coordination. Audio/video conferences in
infra structure less environments are also commonplace in military settings.

In private settings, such as airports and university campuses, multiparty games can be contemplated.
Furthermore, in commercial settings such as multihop cellular networks, network operators may, for
performance reasons, consider decentralizing the execution of conferencing services in the MANET portion
of the multichip cellular network whenever all of the conference participants are in that portion

Page | 40
www.iiste.org

Vol 1, No.1, 2011

A multimedia conference (multiparty sessions) can be defined as a conversational exchange of
multimedia content between several parties. Some examples are audio/video conferencing, massively
multiparty gaming, and debating. Two main components make up multimedia conferencing: signaling and
media handling. Media handling deals with media transportation, mixing, and transcoding. Signaling is the
nerve center of multimedia conferencing. It enables the initiation, modification, and teardown of conferences
by establishing, controlling, and ending the signaling connections between participants. Signaling
architectures for conferencing in infrastructure-based networks have been extensively discussed in the
literature. Classical examples are H.323 [2] and SIP XCON [3]. Unfortunately, these architectures are highly
inadequate for MANETs.

This paper is devoted to signaling for multimedia conferencing in stand-alone MANETs. It
identifies the challenges, discusses the drawbacks of the existing architectures, and proposes and validates a
new architecture. This architecture relies on application-level clusters and is an extension of the cluster-based
signaling system [C. Fu, R.H. Glitho, and R. Dssouli, (Mar. 2005)] that we have proposed in previous work.

The cluster heads are elected based on their capabilities. The cluster size is based on both the
capabilities of the cluster head and the cluster split value. Our clusters are significantly different from routing
layer clusters, such as those discussed in [J.Y. Yu and P.H.J. Chong,( Mar. 2005)]. Routing level clusters are
formed using the physical or geographical location of nodes, and they have no relation to whether or not there
is a conference at the application layer. Our signaling clusters are formed only when there is a conference,
and thus, they are completely independent of the routing layer clusters.

Fig.1

We have selected Session Initiation Protocol (SIP) [J. Rosenberg et al., (June 2002)] as the
implementation technology. The SIP extensions are described and the deployment techniques are discussed.
We also evaluated the performance of our architecture through simulation using OPNET. The rest of the
paper is organized as follows: In Section 2, we present an application scenario and derive the requirements. In
Section 3, we evaluate the related work. Section 4 is devoted to the architecture. In Section 5, we discuss the
implementation. Performance evaluation is covered in Section 6, and we conclude in the last section.

2. APPLICATION SCENARIO AND REQUIREMENTS

Conferencing enables a broad range of applications in MANETs. These applications may comprise
different media types and involve different numbers of participants. They may be public or private—for
preselected members only. They may be prearranged or established in an ad hoc manner. Fig. 1 illustrates an
ad hoc conference scenario in an airport. Passengers waiting for their flights wish to play a multiparty
Page | 41
www.iiste.org

Vol 1, No.1, 2011

multimedia game using their handheld devices (laptop, PDA, or cell phone). We assume that the game is
preloaded on their devices, which are connected through IEEE 802.11 wireless cards. Passenger A starts the
game by inviting Passenger B and they establish an audio session. Then, Passenger B invites Passenger C to
join the session, and then informs Passenger A that C has joined. Passengers D, E, F, and G are invited to join
the game and a seven-party game is established. Various media are exchanged among the parties. In this
scenario, the signaling system is responsible for establishing sessions, negotiating media types, and
propagating participant information. These functions, well-understood and established for
infrastructure-based networks, become very challenging for MANETs. We therefore derive six requirements
for signaling in MANETs.

Because MANETs are infrastructureless, the first requirement is that none of the involved functional
entities can be permanently centralized. The second requirement stipulates that the system should be able to
dynamically propagate conference-related information (e.g., who joins, who leaves) to all of the involved
parties. This is no easy task, as conferences are normally very dynamic in MANETs. Parties can join and
leave at any time.

A party may leave the conference when it decides to do so or when it is forced to because it has
moved out of the coverage area or its battery power is used up. In this paper, we term the first case (which
may occur in any network) “voluntary departure” and the second (which is specific to MANETs)
“unintentional departure.” A signaling system for multimedia conferencing in MANETs should handle both
situations gracefully. The third requirement is scalability. A varying level of scalability is expected from
MANETs, depending on the different application scenarios. The signaling system should scale automatically,
and in the same manner as the network in which it is implemented. MANETs are made up of heterogeneous
nodes. Some nodes may have a high level of resource (e.g., processing power, memory), while others may
have very limited capabilities, a situation that leads to two additional requirements. The system should be
lightweight, a prerequisite that accommodates nodes with limited resources, and the use of the resources
available to the system should be optimal.

The last requirement is independence from the lower layer protocols. There is a plethora of lower
layer routing protocols in MANETs. The signaling system is at the application level and it cannot afford to
rely on the features of specific lower layer protocols because these lower layer protocols may not be available
in some environments.

3. RELATED WORKS

Seminal work has been done on signaling for multimedia conferencing in infrastructure-based
networks by standard bodies (i.e., ITU-T and IETF). This work has triggered further research on the same
topic independently of these organizations. In this section, we first review approaches proposed for
infrastructure-based networks, and then review approaches that take into account some of the specifics of
MANETs.

3.1 Signaling for Conferencing in Infrastructure-Based Networks

3.2 Signaling Protocols from Standards Bodies

Multimedia conferencing over packet-switched networks is specified by the ITU-T, as a subset of
the H.323 series of recommendations [H.323 Series,( 2003)]. H.323 defines four entities: terminal, gateway,
gatekeeper, and Multipoint Control Unit (MCU). Multimedia conference control in H.323 is done via the
MCU. The MCU can be divided into two entities: the multipoint controller (MC) and the multipoint
processor (MP). The MC is devoted to signaling while the MP handles media. H.323 defines three conference

Page | 42
www.iiste.org

Vol 1, No.1, 2011

models: centralized, distributed, and mixed. Each of these models requires a centralized MC. As an
infrastructure-based protocol, H.323 does not meet most of our requirements. It is complex and heavy.

A rather early work in IETF, the Connection Control Protocol (CCP) is based on multicast. It
considers only one conference scenario, i.e., the scenario in which the conference initiator creates a
conference. Schooler and Casner [E.M. Schooler and S.L. Casner, (1992)] give an introduction. If we review
the CCP in terms of our requirements, we find that there is no permanent centralized entity, but the CCP does
not meet the other requirements. For example, it relies on a network layer that supports multicast, while our
requirements stipulate independence from the lower layers.

The IETF has been working on new approaches since the early 2000s, as part of the work on SIP.
SIP is a set of specifications, which includes a baseline specification [J. Rosenberg et al., (June 2002)] and
many extensions. It defines four entities: User Agent (UA), proxy server, location server, and registrar. A
session control function is located in the user agent. SIP servers are non mandatory entities that help to route
SIP messages and locate SIP user agents. SIP is lightweight and extendible and it has been used for two
different conference models, tightly and loosely coupled, in infrastructure-based networks. A loosely coupled
conference is based on multicast. The IETF draft [C. Bormann, J. Ott, and C. Reichert,( Dec. 1996)] describes
Simple Conference Control Protocol (SCCP), a loosely coupled conference control protocol that uses SIP as
the signaling protocol. The signaling architecture is centralized. Signaling messages are exchanged between a
controller and a participant through multicast. If we evaluate SIP in SCCP, it cannot meet most of the
requirements, e.g., there is a permanent central point and multicast is required in the network layer. A tightly
coupled conference is central-server-based. Rosenberg [J. Rosenberg, (Feb. 2006)] defines the SIP usage in
this sort of conference model. SIP creates sessions between each participant and a conference focus (i.e., the
central server).
This conference model cannot meet our first requirement because it has a permanently central entity.

3.3 Proposals outside Standard Bodies

The framework proposed in [J. Rosenberg, (Feb. 2006)] is still another work deploying SIP for
conferencing. It extends the tightly coupled conference of SIP. Multiple conference focuses are proposed and
each focus manages a set of local participants. The conference focuses are interconnected and form a tree
structure. This work extends the scale of the work defined in [J. Rosenberg, (Feb. 2006)], but does not solve
other issues. For example, there are still permanent central entities in this framework. Global MMCS [H.
Bulut, A. Uyar, and G.C. Fox, (July 2005)] is designed to bridge H.323, SIP, Access Grid clients, and
2.5G/3G cellular phones in audiovisual collaborative applications. The system makes use of a
publication-/subscription-based message delivery middleware, the Narada Broking overlay network. As far
as multimedia conferencing is concerned, the system borrows the ideas of MCU from H.323. However,
unlike H.323, the MCs can be distributed. Although this distribution brings more scalability, our first
requirement is still not met because each MC is a permanently centralized entity. ICEBERG signaling [H.J.
Wang et al., (Aug. 2000 )] proposes a signaling system for management of dynamic and multi device
multiparty sessions. Unlike the other signaling protocols such as SIP, it is a signaling system that is
specifically designed for multimedia conferencing. It does not have a permanently central point but defines
“call sessions” that are responsible for signaling control. A “call session” is only created when there is a
conference. The call sessions dynamically propagate information to participants. Thus, the first and second of
our requirements are met. However, the system does not take into account device heterogeneity, does not
handle unintentional departures of participants, and relies on the routing layer multicast.

3.4 Signaling for Conferencing in Infrastructure less Networks

Mark and Kelley [H.323 Series,( 2003)] describe an SIP application for a fully distributed
conference model. In the model, each participant maintains an SIP session with other participants. The
approach is of special interest to us because it only involves an SIP end system (UA) and no server is
Page | 43
www.iiste.org

Vol 1, No.1, 2011

required. Thus, the first requirement—no permanent central point—is met. In addition, the approach is
lightweight because there is no extra control message added to the baseline SIP but the session related
information is carried by the basic SIP messages.

However, this approach has several drawbacks, one of which is how the session-related
information is propagated. There is a problem when two (or more) parties are invited to join an ongoing
conference at the same time. There is no general solution to ensure that each of the invited parties is made
aware of the other invited parties. The problem is identified in [H.323 Series,( 2003)] as the “coincident join,”
and no solution is provided. Another drawback is that unintentional departures are not considered and are not
handled gracefully. Also, the approach does not scale because the number of signaling connections increases
exponentially with the number of participants in the conference. The framework defined in [H.J. Wang et al.,
(Aug. 2000 )] is the first work that we found for conferencing in MANETs. It is also an SIP-based solution
and it has solved the “coincident join” problem identified in [H.J. Wang et al., (Aug. 2000 )]. It proposes a
conference leader that maintains conference states.

The leader is responsible for propagating session-related information to every other participant in
the conference. However, the approach is fully distributed in terms of signaling architecture, i.e., every
participant maintains a session with every other party. Thus, related drawbacks such as limited scalability are
issues with this approach. In addition, this framework does not consider the unintentional departure of
participants and the optimal use of resources. In [C. Fu, R.H. Glitho, and R. Dssouli, (Mar. 2005)], we
proposed an early version of cluster-based signaling architecture for multiparty sessions in MANETs. This
architecture potentially meets most of the derived signaling requirements. However, the requirements for
handling the unintentional departure of nodes and the independence of lower layer routing protocols were not
addressed.

In that work, the general principles of the cluster schemes were presented, but no detailed
description was provided and some issues were not addressed. For example, we specified that a cluster head
is elected based on the resource level of conference participants, but there is no description of how a
participant knows the resource levels of other parties. As another example, a cluster may split if its size
reaches the split value, but what happens if a cluster head does not have enough capability to handle
participants? In addition to these issues, how the cluster scheme solves the “coincident join” and other
problems such as “coincident cluster head leaving” have not been discussed. We selected SIP as the
implementation technology and built a prototype in [C. Fu, R.H. Glitho, and R. Dssouli, (Mar. 2005)], but the
issue of SIP deployment in MANETs was not fully addressed. The deployment of SIP in MANETs includes
two sub issues, i.e., how to discover other SIP end points in the network and how to route an SIP message to
its correct destination. In this paper, we address all of the aforementioned disuses and provide a
comprehensive signaling solution for conferencing in MANETs.

4. CLUSTER-BASED SIGNALING ARCHITECTURE

Clusters enable scalability without centralization and we believe that they can aid in meeting all of
the requirements. The overall architectural principles are presented first,
followed by a description of the clusters’ operational procedures. We then discuss the critical issues related to
the operational procedures.

Page | 44
www.iiste.org

Vol 1, No.1, 2011

Fig.2 Overall Architecture and Principles

Fig2. gives an overall view of the proposed cluster-based architecture. The only functional entity is the
signaling agent (SA). There is one per party, or more generally, one per node in a stand-alone MANET. They
are grouped in clusters that we call signaling clusters. These signaling clusters are application-level clusters
that are independent of lower layer clusters such as routing clusters. In each cluster, at any given time, there is
one and only one cluster head (we call it the super member), and all the other members of the cluster are
connected to it. All super members have direct links to the super members of the neighboring clusters. There
are two general parameters of a cluster: Split value (Sv) and Merge value (Mv). Every node in a conference
maintains the same Sv and Mv. If the sizeof a cluster reaches Sv, the cluster will split into two clusters. If it
reaches Mv, the cluster will find another cluster to merge with.

A super member is responsible for keeping track of the information of its members and its
neighboring super members. It also propagates the information when there is a change in membership. In
addition, it detects the eventual unintentional departures of the nodes connected to it by sending periodic
heartbeat messages to them. In our architecture, it is the node with the most capabilities that is elected as the
super member. In this paper, the capability of an MANET node can be any attribute usually considered as
node capability in the literature (e.g., battery power, memory capacity, and processing power). However, we
do not specify either the factors used to compute the capability or how to do the computation. We assume, for
the sake of simplicity, that a node always “knows” its capability. We also assume that this capability is
represented by a numerical value. A participant that initiates a conference is responsible for collecting the
capability of the called party before the conference is initiated. Super members keep track of the capability
changes of their members and neighboring super members during the conference.

4.1 Operational Procedures of Clusters

In our architecture, clusters are dynamically created and deleted when conferencing. The signaling
system is responsible for maintaining the state of the conference and the clusters. Each signaling cluster has a
life cycle. The first phase is its creation when a supermember is elected. After its creation, the cluster moves
to the active
phase. The cluster membership evolves (parties join and leave). These changes may lead the cluster to split in
two, or to merge with another cluster. Ongoing activity may also lead to the election of a new supermember,
necessitated by the departure of the supermember, for example. The life cycle ends with the deletion of the
cluster. In this section, we describe the signaling procedures related to each of the phases of the cluster life
cycle.
Page | 45
www.iiste.org

Vol 1, No.1, 2011

4.2 Creation and Deletion

The first cluster is created when the conference starts. The creation procedure is as follows: first, the
party (called the initiator) that wishes to establish a session collects the capability of the called party. It
compares the capabilities of itself and the called party and designates the one with more capability as the
super member. Second, it requests the
super member (itself or the called party) to create a session. The initiator needs to set the Sv and Mv and
passes the parameters to the called party. After the first session is set up, the super member starts to
periodically collect the capabilities of its members. The last cluster is deleted when the last two parties leave
the session. All the states and parameters of the cluster are then cleared.

4.3 Changes in Cluster Membership

Both members and super members can invite parties to join a conference. If it is a supermember
inviting and the supermember is capable of handling more members, the supermember directly establishes a
session with the party. If the supermember cannot handle more members, it may ask a neighboring
supermember to do so. If a member invites a party, that member asks its supermember to establish the
session. A new member is then added to the cluster. The supermember of the cluster propagates the
membership change to the neighboring clusters. Any participants, including members and supermembers,
may leave a conference whenever they want to. In the case of a member departure, the member terminates its
connection with its supermember and the supermember propagates the membership change to the
neighboring clusters. With the departure of a supermember, that supermember designates a new
supermember (choosing
the member with most capability among the member list) before leaving. It passes its member list and
neighboring supermember list to the new supermember. The new supermember sets up a session with each
member and each neighboring supermember and forms a new cluster. After this procedure, the old
supermember terminates all of its connected sessions. In the situation where there is nomember in a cluster,
the supermember that wishes to leave simply terminates all of its connected sessions. Frequent changes of
clusters’ supermembers can lead to instability. The clustering algorithm described in [E.M. Schooler and S.L.
Casner, (1992)] has proposed rules to make sure that the cluster head changes
as infrequently as possible. Similarly, we set a rule that when a party joins a cluster, it does not replace the
supermember, even if it has more capability. This helps to maintain the stability of the clusters, but does not
prevent the supermember from leaving if it decides to do so.

4.4 Splitting and Merging

When a new member is added to a cluster, the supermember initiates the split procedure if the size of
the cluster has reached Sv or if the supermember does not have enough capability to handle more members.
This happens, for instance, when the battery power of the supermember decreases. First, the supermember
selects a new supermember, based on capabilities. It also selects half of its members that are to become
members of the new cluster. The selection may be random or according to certain rules, such as the members
with higher addresses. It then asks the new supermember to form a new cluster that contains the selected
members, passing the selected member list and neighboring supermember list to the new supermember. The
new supermember creates a new cluster by establishing sessions. The supermember then terminates sessions
with the selected members. Fig. 3 shows a signaling architecture before and after splitting.

If the size of the cluster diminishes to the Mv, the supermember initiates a merger procedure. This
procedure consists of searching for an existing cluster with which to merge, with the constraint that the size
after the merger will be less than Sv. A new supermember is elected as soon as the merger begins. The new
Page | 46
www.iiste.org

Vol 1, No.1, 2011

supermember will be one of the two supermembers (the one with more capability) of the two clusters. The
procedure continues as follows: the elected supermember establishes sessions with the members of the cluster
to merge with. The unelected supermember then terminates sessions with its members and sets the elected
supermember as its supermember, and it becomes a regular member. The merger information will then be
propagated to the neighboring supermembers. Setting the Sv is critical for the signaling system. For example,
if the Sv is too small, the system may exhibit poor performance due to frequent splitting. If the Sv is too large,
the signaling will have a centralized structure. On the one hand, we expect a minimum number of clusters so
that the overall signaling overhead is low. On the other hand, a centralized architecture is unacceptable for a
large-scale conference

4.5 Super member Election

An election algorithm is used whenever there is a need to select a new super member among several
candidates. The basic rule is that the candidate with the most capability is selected as a super member. We
assume that a party that wishes to elect a new super member knows a list of candidate’s fcandidate1 . . .
candidateng, where n is the number of candidates. The respective capabilities of these candidates are fCap1 .
. . Capng. The algorithm is described below:
1. Capmax Cap1
2. loop i (from 2 to n)
3. if (Capmax is less than Capi)
4. Capmax Capi
5. max i
6. end
7. end
8. super member candidatemax

4.6 Information Propagation

In order to maintain a signaling cluster system, efficient information propagation is very important,
i.e., rapid propagation with as little introduced overhead as possible. In our architecture, super members are
responsible for propagating membership and capability information whenever there is a change. The
information can be propagated to all the signaling agents in no more than two hops. Fig. 2 shows an example.
An option that can further reduce propagation overhead is that only part of the information is propagated, and
only to super members. This is realistic because it is not necessary for every member to have knowledge of
every system change, e.g., a splitting of a cluster.

4.7 Specific Issue Discussion-Coincident Behaviors

One issue of a distributed signaling architecture is the state synchronization when there are
coincident behaviors of participants in the conference. Such behaviors may cause inconsistent states among
participants, e.g., with a coincident joining (defined in [P. Koskelainen, H. Schulzrinne, and X. Wu, (May
2002)]), two newly joined parties have no means to know each other, so no session will be established
between them, and thus, the fully distributed signaling architecture cannot be maintained. Due to the
information propagation procedure, the cluster scheme defined in this paper can handle most coincident
behaviors, but in some cases, protection mechanisms should be used to prevent inconsistencies. We discuss
this issue case by case.

4.7.1 Coincident join:

Page | 47
www.iiste.org

Vol 1, No.1, 2011

Two or more parties join a conference at the same time. They may join the same cluster or different
clusters. Our scheme can handle this case because the coincidently joined parties do not have a direct session
with Fig. 1. Cluster splitting. (a) Before splitting. (b) After splitting. Fig. 2. Information propagation as a new
party joins. each other. Instead, they establish sessions with the supermembers that are already in the cluster
and later they can “know” each other from their supermember(s).

4.7.2 Coincident departure.

Two or more participants leave a conference at the same time. They may leave the same cluster or
different clusters. Similar to the first case, our scheme can handle the coincident departure of members and
less than two super members. Our scheme cannot handle the coincident departure of supermembers because
the newly selected super members cannot already have knowledge of each other. In order to avoid such a
case, we define a protection phase when a super member leaves. A supermember should reject any session
establishment or termination request when it starts to leave. The protection phase ends when the super
member has completed the leaving procedure. Within this protection phase, a super member leaving
procedure will be failed if another super member is leaving at the same time, because the newly selected
super member cannot establish a session with a leaving, neighboring super member. If a super member fails
to leave, it will retry after a random period of time.

4.7.3 Coincident splitting.

Two or more clusters split at the same time. Due to the mesh structure of super members, the super
members in older clusters maintain a session with every newly split super member. After a run of the
information propagation procedure, a newly split super member will have knowledge of the other new super
members. The logic to be added in order to handle this case is that if a super member finds that it has not
established a session with a neighboring super member and if it has a higher address, it will establish a session
with that super member. Coincident merging. Two or more pairs of clusters merge at the same time. Our
scheme can handle this case because there is no new super member elected. The cluster state can be
propagated to all the neighboring super members.

5. CONCLUSIONS AND FUTURE WORK

MANETs have been an active research area for several years. A key motivation is the possibility of
novel application scenarios. Conferencing enables a set of attractive applications in MANETs. We find it an
interesting research topic because it is very challenging to deploy a conference in MANETs. For example, the
centralized conference model defined for traditional infrastructure-based networks is not adequate for
MANETs.

In this paper, we addressed an important conferencing issue: signaling. We have presented the
challenges, reviewed the state-of-the-art signaling protocols, and proposed a cluster-based signaling scheme.
The clusters are dynamically created at the application level, taking the node capabilities into account. This
scheme overcomes the problems of the related works and meets the requirements that we derived. In order to
implement the scheme in a real MANET environment, we have also discussed the implementation
technologies. We found that SIP extensions and SIP distribution are promising solutions.

The performance of the signaling scheme has been evaluated through simulation. For the simulation
experiments, we have developed all of the signaling entities that we defined. The results show that our
signaling scheme outperforms the existing conferencing framework for ad hoc networks. It can support
different scales of conferences and it can run on different lower layer routing protocols. In this work, we have
evaluated conference scales up to 100 nodes. It would be very interesting to know the behaviors of the
Page | 48
www.iiste.org

Vol 1, No.1, 2011

signaling scheme with hundreds and even thousands of nodes. However, the current experimental
environment has a limited scope. Another interesting direction for future work is the evaluation of our
conference scheme under different wireless settings, such as various coverage ranges, fading conditions, and
background noises. Still another interesting future work is optimization of the signaling scheme. This can be
done by improving the signaling scheme at the application layer or by using a cross-layer design.

6. REFERENCES

[1] C. Fu, R.H. Glitho, and R. Dssouli, (Mar. 2005) “A Novel Signaling System for Multiparty Sessions in
Peer-to-Peer Ad Hoc Networks,” Proc. IEEE Wireless Comm. And Networking Conf. (WCNC ’05),.1004
IEEE TRANSACTIONS ON MOBILE COMPUTING, VOL. 8, NO. 7, JULY 2009 TABLE 3 Average
Recovery Delay with Different Types of Session Failures
[2] O. Novo, G. Gamarillo, D. Morgan, and R. Even,( Apr. 2006) “A Common Conference Information Data
Model for Centralized Conferencing (XCON),” IETF Internet draft, work in progress,.
[3] J. Rosenberg, (Feb. 2006) “A Frame Feb. 2006work for Conferencing with the Session Initiation
Protocol“(SIP), IETF RFC 4353.
[4] H. Bulut, A. Uyar, and G.C. Fox, (July 2005)“Adapting H.323 Terminals in a Service-Oriented
Collaboration System,” IEEE Internet Computing, vol. 9, no. 4, pp. 43-50.
[5] J.Y. Yu and P.H.J. Chong,( Mar. 2005) “A Survey of Clustering Schemes for Mobile Ad Hoc Networks,”
IEEE Comm. Surveys, vol. 7, no. 1, pp. 32-48.
[6] J. Liu and I. Chlamtac, (July 2004) “Mobile Ad-Hoc Networking with a View of 4G Wireless:
Imperatives and Challenges,” Mobile Ad Hoc Networking, chapter 1, Wiley-IEEE Press.
[7] H.323 Series,( 2003) ITU-T Recommendations.
[8] J. Rosenberg et al., (June 2002)SIP: “Session Initiation Protocol”, RFC 3261.
[9] P. Koskelainen, H. Schulzrinne, and X. Wu, (May 2002) “A SIP-Based Conference Control Framework,”
Proc. ACM Int’l Workshop Network and Operating Systems Support for Digital Audio and Video
(NOSSDAV ’02).
[10] H.J. Wang et al., (Aug. 2000 )“Iceberg: An Internet Core Network Architecture for Integrated
Communications,” IEEE Personal Comm., vol. 7, no. 4, pp. 10-19 .
[11] C. Bormann, J. Ott, and C. Reichert,( Dec. 1996) “Simple Conference Control Protocol,” IETF Internet
draft, work in progress.
[12] E.M. Schooler and S.L. Casner, (1992)“An Architecture for Multimedia Connection Management,”
Proc. IEEE Fourth Comm. Soc. (ComSoc) Int’l Workshop Multimedia Comm.
(MM ’92), pp. 271-274

Page | 49
www.iiste.org

International Journals Call for Paper
The IISTE, a U.S. publisher, is currently hosting the academic journals listed below. The peer review process of the following journals
usually takes LESS THAN 14 business days and IISTE usually publishes a qualified article within 30 days. Authors should
send their full paper to the following email address. More information can be found in the IISTE website : www.iiste.org

Business, Economics, Finance and Management PAPER SUBMISSION EMAIL
European Journal of Business and Management EJBM@iiste.org
Research Journal of Finance and Accounting RJFA@iiste.org
Journal of Economics and Sustainable Development JESD@iiste.org
Information and Knowledge Management IKM@iiste.org
Developing Country Studies DCS@iiste.org
Industrial Engineering Letters IEL@iiste.org

Physical Sciences, Mathematics and Chemistry PAPER SUBMISSION EMAIL
Journal of Natural Sciences Research JNSR@iiste.org
Chemistry and Materials Research CMR@iiste.org
Mathematical Theory and Modeling MTM@iiste.org
Advances in Physics Theories and Applications APTA@iiste.org
Chemical and Process Engineering Research CPER@iiste.org

Engineering, Technology and Systems PAPER SUBMISSION EMAIL
Computer Engineering and Intelligent Systems CEIS@iiste.org
Innovative Systems Design and Engineering ISDE@iiste.org
Journal of Energy Technologies and Policy JETP@iiste.org
Information and Knowledge Management IKM@iiste.org
Control Theory and Informatics CTI@iiste.org
Journal of Information Engineering and Applications JIEA@iiste.org
Industrial Engineering Letters IEL@iiste.org
Network and Complex Systems NCS@iiste.org

Environment, Civil, Materials Sciences PAPER SUBMISSION EMAIL
Journal of Environment and Earth Science JEES@iiste.org
Civil and Environmental Research CER@iiste.org
Civil and Environmental Research CER@iiste.org

Life Science, Food and Medical Sciences PAPER SUBMISSION EMAIL
Journal of Biology, Agriculture and Healthcare JBAH@iiste.org
Food Science and Quality Management FSQM@iiste.org
Chemistry and Materials Research CMR@iiste.org

Education, and other Social Sciences PAPER SUBMISSION EMAIL
Journal of Education and Practice JEP@iiste.org
Journal of Law, Policy and Globalization JLPG@iiste.org Global knowledge sharing:
New Media and Mass Communication NMMC@iiste.org EBSCO, Index Copernicus, Ulrich's
Journal of Energy Technologies and Policy JETP@iiste.org Periodicals Directory, JournalTOCS, PKP
Historical Research Letter HRL@iiste.org Open Archives Harvester, Bielefeld
Academic Search Engine, Elektronische
Public Policy and Administration Research PPAR@iiste.org Zeitschriftenbibliothek EZB, Open J-Gate,
International Affairs and Global Strategy IAGS@iiste.org OCLC WorldCat, Universe Digtial Library ,
Research on Humanities and Social Sciences RHSS@iiste.org NewJour, Google Scholar.

Developing Country Studies DCS@iiste.org IISTE is member of CrossRef. All journals
Arts and Design Studies ADS@iiste.org have high IC Impact Factor Values (ICV).

11.signaling for multimedia conferencing in stand alone mobile ad hoc networks

More Related Content

What's hot (16)

Similar to 11.signaling for multimedia conferencing in stand alone mobile ad hoc networks (20)

More from Alexander Decker (20)

Recently uploaded (20)

11.signaling for multimedia conferencing in stand alone mobile ad hoc networks