2010 Traxx
2 likes522 views
The document details the Traxx product system for maximizing wall space functionality with various tiles and presentation tools. It outlines installation instructions, available dimensions, and hardware requirements, along with integration options with panel systems and modular furniture. Traxx supports a variety of configurations and offers custom paint finishes, making it versatile for different interior walls and applications.
2010 Traxx
- 1. We will be starting momentarily.For Audio Please Dial:Conference Call 888.481.3032Passcode 75892620#Press *6 to mute phone on/off
- 2. Attach Traxx to building walls and convert any space into useful space.
- 3. Maximize wall space and functionality:Tackable fabric tilesMarket board tilesSlat tilesPresentation tools
- 4. Panel Statement of LinePage 300Traxx blends well with all systems products. The attachment hardware necessary for a specific panel system can be found in that section of the pricelist.Also shown on this page Trim caps, Trim Channels, Vertical Cable Manager, Attachment Bracket Kits.TraxxFastner ConcealmentFabric TilesMarker Board TilesFlexboardsSlat TileExtendable Flip Chart HolderSwivel Marker BoardOverhead Projection BoardPresentation RailFlip Chart HolderEnd Trim
- 5. Traxx OverviewPage 301Traxx is a simple ¾” horizontal rail attached to the wall.Power and Electrical are taken from wall locations.This product integrates with all systems products and select modular desks and storage.Traxx is available in all paint finishes.Blocking is not required for this product.Upper Traxx is not required in every application.Tiles can be adapted to field dimensions.Work Tools are located in the Perks catalog.
- 6. Traxx DetailsPage 302 & 303Traxx can be mounted to most interior walls including steel, wood, stud walls, masonry block or solid masonry walls.Custom paint finishes can be done locally by specifying antique white.Traxx can be mounted at any height. Traxx is available in 72” and 144” , it can be cut in the field to the required custom dimension by the installer.Rails are purchased in sets with four splice plates included.Traxx does not have to be used in an upper and lower condition.Images taken from installation instructions.
- 7. TraxxFastner DetailsAlso listed on Page 303 All hardware is provided by the dealer as wall conditions are best determined by the installer.Traxx can not extend more than 6” from the last connection.When hung as a pair the mounting height will vary depending on the corresponding panel system, if used.Images taken from installation instructions.
- 8. Presentation ToolsPage 304Presentation tools allow conference height tiles to create a more in depth presentation. Tools can be built up to 3 layers.Flexboards provide a marker or fabric combination.Swivel marker/ presentation boards allow use of corner space in a room.To end a defined space consider using an end trim to finish off the cut edge located on page 322.
- 9. Splice Plate DetailsPage 305There function is to join cut segments.Additional splice plates may be required when you are going around a corner.It is recommended that corners are mitered on the outside. Inside corners are butted.Splice plates provide a stronger connection when joining two cut pieces of Traxx.Minimum distance of Traxx is 16” for connection to studs in the wall. If used with an overhead the minimum dimension is 24”.Images taken from installation instructions.
- 10. Fastner Concealment DetailPage 305Fastner concealment is sold as two finishes vinyl and felt.The 700” roll will accommodate two sets of 144” Traxx.Vinyl is specifically used for instances used with conferencing solutions.Felt is used primarily in closed/ private office applications.
- 11. Traxx Tile HeightsStarts on page 306Reference the corresponding tile height to the appropriate panel system.When using tiles with Xsite be sure to include fabric that is railroaded.Tiles can be field scribed.Trim channels can add space of conceal cut edges. Additional channels may be required when creating additional tiles.Conferencing tiles are also used with 80” high panels.
- 12. Traxx & Tiles DetailsMost popular tiles are fabric.The least expensive option is to go the distance however they can be specified to match worksurface dimensions.Tiles can be cut in the field to exact dimension.Trim channels act as spacers in filling odd and uneven dimensions.Images taken from installation instructions.
- 13. Slat Tile and Combination Tile HeightsPage 310To reduce cost combination tiles can be specified. The slats are 1” and the grooves are ½”. The grooves are used to plan with work tools.Be sure to specify the correct finish to the selected trim channels.When specifying combination tiles be sure to pay particular attention to the height of the overhead with fabric height.
- 14. TraxxApplicationsTraxx is a universal product.It can be used with systems product as well as a stand alone product.Consider the various examples shown here. While traxx are used in specific positions the locations are actually endless.
- 15. Traxx & Tiles with CetraYou can attach Cetra panels to Traxx with a starter panel.The back wall does not require panels given the panels are attached to Traxx.The same profile of overheads can be used on Traxx or Cetra panels the difference is the bracket.
- 16. CetraTraxx Starter Panel Page 30The advantage in using this panel is to not have any breaks in Traxx while connecting at any point without interruption.This panel is none supporting for components.The panel is 6” and non-powered.Image taken from installation instructions.
- 17. CetraTraxx Starter PanelM MountYou may want to consider creating a perimeter walls with Cetra panels only placing Traxx on the inside.Cetra requires the starter panel in order to connect. This will not break your application of Traxx and offers the greatest possibilities for reconfiguration.Panel is 6” wide and is non-powered.Traxx Starter
- 18. Traxx & Tiles with Cetra in CAPPage 30 &306Notice the right side of the drawing the overheads are hanging off the Cetra panels. The left side the overheads are hanging from Traxx.
- 19. Traxx & Tiles Trim Cap with CetraPage 314Don’t forget using the trim cap when combining Traxx with a panel system of desks and storage application.Consider using the trim cap when mixing Traxx with Cetra.The trim cap is not structural.
- 20. Traxx with Interworks EQThe Interworks connection is more clean given the polymer hinge panel connection.
- 21. Traxx with Interworks EQPage 286 & 306The Interworks connection to Traxx offers the ability to use a full height end trim to conceal the cut rail on page .Image taken from installation instructions.
- 22. Traxx with Interworks EQ in CAPYou can start the Interworks panel from the edge of Traxx based on the full end trim.
- 23. Panel spacing with Traxx in CAP When planning with traxx & tiles consider the spacing for the panels. The spacing may require the modification of worksurfaces.Is it a “special “ that would be quoted from By Design?
- 24. TraxxWorksurface BracketsPage 316Important: Brackets must be specified separately and sold individually.1 3/16” needs support every 48”.1 9/16” needs support every 60”.Brackets have an anti-kick-out design that provides secure attachment.A variety of additional supports such as angel brackets and support panels are used from Footprint.Images taken from pricelist and installation instructions..
- 25. Storage spacing with TraxxBrackets can easily be spaced any place along the traxx rails. Spacing is located behind the pedestal to accommodate the worksurface brackets.
- 26. Traxx Overhead Mounting Brackets & Overhead Ganging BracketsOverhead BracketsPage 316 & 521 (Footprint)Ganging BracketsPage 523(Footprint)
- 27. Traxx Square, Radius, and Curved Profile Overhead BracketsPage 521& 523(Footprint)Images taken from pricelist and installation instructions.
- 28. Traxx Flat and Bevel Profile Overhead BracketsPage 521& 523(Footprint)Images taken from the pricelist and installation instructions..
- 29. Traxx Lunar Profile Overhead BracketsPage 288 & 499 (Footprint)Images taken from pricelist and installation instructions..
- 30. Traxx Overhead Mounting Brackets & Overhead Ganging BracketsSpacerPage 522(Footprint)Images taken from pricelist and installation instructions.
- 31. Kimball Office ResourcesDealer Sales ManagerSales SpecialistCustomer Care/ By Design800.482.1818 Product Technical Support800.481.6696Product SpecifierAlibia de VenteMarket Education770.265.4006 orAlibia.devente@kimball.com
Editor's Notes
- #4: Traxx & Tiles in this example is used with Definition for a private office application.
- #6: UpperTraxx holds is ideally suited to hang overheads.Lower Traxx is best to support worksurfaces.
- #7: Tackable acoustical panels are 2 5⁄8" thick. Solid hardboard center septum is covered with two densities of fiberglass and the selected fabric.
- #8: These notes are not available in the pricelist.
- #9: These notes are not available in the pricelist.
- #12: These notes are not available in the pricelist.
- #13: Tackable acoustical panels are 2 5⁄8" thick. Solid hardboard center septum is covered with two densities of fiberglass and the selected fabric.
- #14: These notes are not available in the pricelist.
- #25: Go over the items used in the example at the bottom and what it would look like specified on the computer.Surface support panels in wood, laminate or metal should be set 1” from the wll for molding or wires.