Our Gates
- 8. ASTM F-2200 Swing Gates Designed and installed so as to not create an entrapment area between the gate and other fixed objects. Installed in such a way so that the pillar or column covered by the swing gate when in the open position does not exceed 4-inches. Smooth bottom edges. Insure that the gate cannot fall over if it becomes detached from the supporting hardware.
- 34. ASTM F-2200 Slide Gates Weight bearing rollers are guarded or covered. All openings in the gate are guarded or screened from the bottom of the gate to a minimum of 48-inches above the ground to prevent a 2.25-inch diameter sphere from passing through the openings anywhere in the gate, and in that portion of the adjacent fence that the gate covers in the open position. Gaps between the gate and fence, or other stationary objects do not exceed 2.25-inches. Smooth bottom edges. Positive stops to prevent the gate from sliding past its design limits. Insure that the gate cannot fall if it becomes detached from its supporting hardware.