23 Process to_Process_Delivery_UDP_TCP_and_SCTP

23.1
Chapter 23
Process-to-Process Delivery:
UDP, TCP, and SCTP
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

23.2
23-1 PROCESS-TO-PROCESS DELIVERY23-1 PROCESS-TO-PROCESS DELIVERY
The transport layer is responsible for process-to-The transport layer is responsible for process-to-
process delivery—the delivery of a packet, part of aprocess delivery—the delivery of a packet, part of a
message, from one process to another. Two processesmessage, from one process to another. Two processes
communicate in a client/server relationship, as we willcommunicate in a client/server relationship, as we will
see later.see later.
Client/Server Paradigm
Multiplexing and Demultiplexing
Connectionless Versus Connection-Oriented Service
Reliable Versus Unreliable
Three Protocols
Topics discussed in this section:Topics discussed in this section:

23.3
The transport layer is responsible for
process-to-process delivery.
Note

23.4
Figure 23.1 Types of data deliveries

23.6
Figure 23.3 IP addresses versus port numbers

23.8
Figure 23.5 Socket address

23.9
Figure 23.6 Multiplexing and demultiplexing

23.10
Figure 23.7 Error control

23.11
Figure 23.8 Position of UDP, TCP, and SCTP in TCP/IP suite

23.12
23-2 USER DATAGRAM PROTOCOL (UDP)23-2 USER DATAGRAM PROTOCOL (UDP)
The User Datagram Protocol (UDP) is called aThe User Datagram Protocol (UDP) is called a
connectionless, unreliable transport protocol. It doesconnectionless, unreliable transport protocol. It does
not add anything to the services of IP except to providenot add anything to the services of IP except to provide
process-to-process communication instead of host-to-process-to-process communication instead of host-to-
host communication.host communication.
Well-Known Ports for UDP
User Datagram
Checksum
UDP Operation
Use of UDP

23.13
Table 23.1 Well-known ports used with UDP

23.14
In UNIX, the well-known ports are stored in a file
called /etc/services. Each line in this file gives the name
of the server and the well-known port number. We can
use the
grep utility to extract the line corresponding to the desired
application. The following shows the port for FTP. Note
that FTP can use port 21 with either UDP or TCP.
Example 23.1

23.15
Example 23.1 (continued)
SNMP uses two port numbers (161 and 162), each for a
different purpose, as we will see in Chapter 28.

23.16
Figure 23.9 User datagram format

23.17
UDP length
= IP length – IP header’s length
Note

23.18
Figure 23.10 Pseudoheader for checksum calculation

23.19
Figure 23.11 shows the checksum calculation for a very
small user datagram with only 7 bytes of data. Because
the number of bytes of data is odd, padding is added for
checksum calculation. The pseudoheader as well as the
padding will be dropped when the user datagram is
delivered to IP.
Example 23.2

23.20
Figure 23.11 Checksum calculation of a simple UDP user datagram

23.21
Figure 23.12 Queues in UDP

23.22
23-3 TCP23-3 TCP
TCP is a connection-oriented protocol; it creates aTCP is a connection-oriented protocol; it creates a
virtual connection between two TCPs to send data. Invirtual connection between two TCPs to send data. In
addition, TCP uses flow and error control mechanismsaddition, TCP uses flow and error control mechanisms
at the transport level.at the transport level.
TCP Services
TCP Features
Segment
A TCP Connection
Flow Control
Error Control

23.23
Table 23.2 Well-known ports used by TCP

23.24
Figure 23.13 Stream delivery

23.25
Figure 23.14 Sending and receiving buffers

23.26
Figure 23.15 TCP segments

23.27
The bytes of data being transferred in
each connection are numbered by TCP.
The numbering starts with a randomly
generated number.
Note

23.28
The following shows the sequence number for each
segment:
Example 23.3

23.29
The value in the sequence number field
of a segment defines the
number of the first data byte
contained in that segment.
Note

23.30
The value of the acknowledgment field
in a segment defines
the number of the next byte a party
expects to receive.
The acknowledgment number is
cumulative.
Note

23.31
Figure 23.16 TCP segment format

23.32
Figure 23.17 Control field

23.33
Table 23.3 Description of flags in the control field

23.34
Figure 23.18 Connection establishment using three-way handshaking

23.35
A SYN segment cannot carry data, but it
consumes one sequence number.
Note

23.36
A SYN + ACK segment cannot
carry data, but does consume one
sequence number.
Note

23.37
An ACK segment, if carrying no data,
consumes no sequence number.
Note

23.38
Figure 23.19 Data transfer

23.39
Figure 23.20 Connection termination using three-way handshaking

23.40
The FIN segment consumes one
sequence number if it does
not carry data.
Note

23.41
The FIN + ACK segment consumes
one sequence number if it
does not carry data.
Note

23.43
Figure 23.22 Sliding window

23.44
A sliding window is used to make
transmission more efficient as well as
to control the flow of data so that the
destination does not become
overwhelmed with data.
TCP sliding windows are byte-oriented.
Note

23.45
What is the value of the receiver window (rwnd) for host
A if the receiver, host B, has a buffer size of 5000 bytes
and 1000 bytes of received and unprocessed data?
Example 23.4
Solution
The value of rwnd = 5000 − 1000 = 4000. Host B can
receive only 4000 bytes of data before overflowing its
buffer. Host B advertises this value in its next segment to
A.

23.46
What is the size of the window for host A if the value of
rwnd is 3000 bytes and the value of cwnd is 3500 bytes?
Example 23.5
Solution
The size of the window is the smaller of rwnd and cwnd,
which is 3000 bytes.

23.47
Figure 23.23 shows an unrealistic example of a sliding
window. The sender has sent bytes up to 202. We assume
that cwnd is 20 (in reality this value is thousands of
bytes). The receiver has sent an acknowledgment number
of 200 with an rwnd of 9 bytes (in reality this value is
thousands of bytes). The size of the sender window is the
minimum of rwnd and cwnd, or 9 bytes. Bytes 200 to 202
are sent, but not acknowledged. Bytes 203 to 208 can be
sent without worrying about acknowledgment. Bytes 209
and above cannot be sent.
Example 23.6

23.48
Figure 23.23 Example 23.6

23.49
Some points about TCP sliding windows:
❏ The size of the window is the lesser of rwnd and
cwnd.
❏ The source does not have to send a full window’s
worth of data.
❏ The window can be opened or closed by the
receiver, but should not be shrunk.
❏ The destination can send an acknowledgment at
any time as long as it does not result in a shrinking
window.
❏ The receiver can temporarily shut down the
window; the sender, however, can always send a
segment of 1 byte after the window is shut down.
Note

23.50
ACK segments do not consume
sequence numbers and are not
acknowledged.
Note

23.51
In modern implementations, a
retransmission occurs if the
retransmission timer expires or three
duplicate ACK segments have arrived.
Note

23.52
No retransmission timer is set for an
ACK segment.
Note

23.53
Data may arrive out of order and be
temporarily stored by the receiving TCP,
but TCP guarantees that no out-of-order
segment is delivered to the process.
Note

23.54
Figure 23.24 Normal operation

23.55
Figure 23.25 Lost segment

23.56
The receiver TCP delivers only ordered
data to the process.
Note

23.57
Figure 23.26 Fast retransmission

23.58
23-4 SCTP23-4 SCTP
Stream Control Transmission Protocol (SCTP) is aStream Control Transmission Protocol (SCTP) is a
new reliable, message-oriented transport layernew reliable, message-oriented transport layer
protocol. SCTP, however, is mostly designed forprotocol. SCTP, however, is mostly designed for
Internet applications that have recently beenInternet applications that have recently been
introduced. These new applications need a moreintroduced. These new applications need a more
sophisticated service than TCP can provide.sophisticated service than TCP can provide.
SCTP Services and Features
Packet Format
An SCTP Association
Flow Control and Error Control

23.59
SCTP is a message-oriented, reliable
protocol that combines the best features
of UDP and TCP.
Note

23.60
Table 23.4 Some SCTP applications

23.61
Figure 23.27 Multiple-stream concept

23.62
An association in SCTP can involve
multiple streams.
Note

23.63
Figure 23.28 Multihoming concept

23.64
SCTP association allows multiple IP
addresses for each end.
Note

23.65
In SCTP, a data chunk is numbered
using a TSN.
Note

23.66
To distinguish between different
streams, SCTP uses an SI.
Note

23.67
To distinguish between different data
chunks belonging to the same stream,
SCTP uses SSNs.
Note

23.68
TCP has segments; SCTP has packets.
Note

23.69
Figure 23.29 Comparison between a TCP segment and an SCTP packet

23.70
In SCTP, control information and data
information are carried in separate
chunks.
Note

23.71
Figure 23.30 Packet, data chunks, and streams

23.72
Data chunks are identified by three
items: TSN, SI, and SSN.
TSN is a cumulative number identifying
the association; SI defines the stream;
SSN defines the chunk in a stream.
Note

23.73
In SCTP, acknowledgment numbers are
used to acknowledge only data chunks;
control chunks are acknowledged by
other control chunks if necessary.
Note

23.74
Figure 23.31 SCTP packet format

23.75
In an SCTP packet, control chunks come
before data chunks.
Note

23.76
Figure 23.32 General header

23.78
A connection in SCTP is called an
association.
Note

23.79
No other chunk is allowed in a packet
carrying an INIT or INIT ACK chunk.
A COOKIE ECHO or a COOKIE ACK
chunk can carry data chunks.
Note

23.80
Figure 23.33 Four-way handshaking

23.81
In SCTP, only DATA chunks
consume TSNs;
DATA chunks are the only chunks
that are acknowledged.
Note

23.82
Figure 23.34 Simple data transfer

23.83
The acknowledgment in SCTP defines
the cumulative TSN, the TSN of the last
data chunk received in order.
Note

23.84
Figure 23.35 Association termination

23.85
Figure 23.36 Flow control, receiver site

23.86
Figure 23.37 Flow control, sender site

23.87
Figure 23.38 Flow control scenario

23.88
Figure 23.39 Error control, receiver site

23.89
Figure 23.40 Error control, sender site

23 Process to_Process_Delivery_UDP_TCP_and_SCTP

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to 23 Process to_Process_Delivery_UDP_TCP_and_SCTP (20)

More from Ahmar Hashmi (20)

Recently uploaded (20)

23 Process to_Process_Delivery_UDP_TCP_and_SCTP