8085 addressing modes
Download as PPTX, PDF33 likes17,499 views
The document discusses the addressing modes used by the Intel 8085 microprocessor. It explains that an instruction specifies an operation along with the source and destination addresses. The Intel 8085 supports 5 addressing modes: direct, register, register indirect, immediate, and implicit. Each mode is defined by how the source or destination operand address is specified in the instruction.
8085 addressing modes
- 2. To perform any operation, we have to give the corresponding instructions to the microprocessor. In each instruction, programmer has to specify 3 things: 1. Operation to be performed. 2. Address of source of data. 3. Address of destination of result. Addressing Modes of 8085
- 3. The method by which the address of source of data or the address of destination of result is given in the instruction is called Addressing Modes. The term addressing mode refers to the way in which the operand of the instruction is specified.
- 4. Intel 8085 uses the following addressing modes: 1.Direct Addressing Mode 2.Register Addressing Mode 3.Register Indirect Addressing Mode 4.Immediate Addressing Mode 5.Implicit Addressing Mode
- 5. In this mode, the address of the operand is given in the instruction itself. LDA is the operation. 2500 H is the address of source. Accumulator is the destination. 1. Direct Addressing Mode
- 6. In this mode, the operand is in general purpose register. MOV is the operation. B is the source of data. A is the destination. 2. Register Addressing Mode
- 7. In this mode, the address of operand is specified by a register pair. MOV is the operation. M is the memory location specified by H-L register pair. A is the destination. 3. Register Indirect Addressing Mode
- 8. In this mode, the operand is specified within the instruction itself. MVI is the operation. 05 H is the immediate data (source). A is the destination. 4. Immediate Addressing Mode
- 9. If address of source of data as well as address of destination of result is fixed, then there is no need to give any operand along with the instruction. CMA is the operation. A is the source. A is the destination. 5. Implicit Addressing Mode
- 10. Thank You Have a Nice Day