Ad355
0 likes210 views
The document summarizes an intelligent, multi-sensor fire detector called the AD355(A) ADAPT detector. It has the following key features: 1. It uses a combination of photoelectric and thermal sensing technologies to automatically adjust its sensitivity without needing programming by a control panel. 2. It has a microprocessor in the detector head that processes alarm data and adjusts sensitivity based on the environment. 3. It is compatible with LiteSpeed and CLIP communication protocols to provide fast response speeds between detectors and control panels.
Ad355
- 1. DF-52386:C • E-810 AD355(A) ADAPT® Multi-Sensor Low Profile Intelligent Detector Addressable Devices General The AD355(A) ADAPT® detector is an intelligent, address- able, multi-sensing, low-profile detector designed for use with Fire•Lite Fire Alarm Control Panels. The ADAPT detector uses a combination of photoelectric and thermal sensing technologies to increase immunity to false alarms. Unlike traditional intelligent detectors, the ADAPT detector has a microprocessor in the detector head that pro- cesses alarm data. As a result, the ADAPT detector adjusts its sensitivity automatically, without operator intervention or con- FAPT-851 with B210.png trol panel programming. Areas where the ADAPT detector is especially useful include office complexes, schools, college campuses, manufacturing and industrial facilities, and anywhere else the use of a partic- ular area may change. The ADAPT detector automatically adjusts its sensitivity to the environment. AD355 in B210LP(A) Base LiteSpeed™ is a communication protocol developed to greatly enhance the speed of communication between analog intelli- gent devices and compatible systems. Intelligent devices com- with classic CLIP systems; 0.5, 1, 2, 3, and 4%/ft. with FlashS- municate in a grouped fashion. If one of the devices within the can systems. group has new information, the panel’s CPU stops the group Size: 2.0" (5.3 cm) high; base determines diameter. poll and concentrates on single points. The net effect is – B210LP(A): 6.1" (15.5 cm) diameter. response speed greater than five times that of earlier designs. – B501(A): 4.1" (10.4 cm) diameter. Features – B200SR(A): 6.875" (17.46 cm) diameter. – B224RB(A): 6.2" (15.748 cm) diameter. • Automatically adjusts sensitivity levels without operator intervention or programming. Sensitivity increases with Shipping weight: 5.2 oz. (147 g). heat. Operating temperature: 0°C to 38°C (32°F to 100°F). • Microprocessor-based, combination photo and thermal UL-Listed velocity range: 0 – 4000 ft./min. (1219.2 m/min.), technology. suitable for installation in ducts. • Compatible with LiteSpeed™ and CLIP systems. Relative humidity: 10% – 93% noncondensing. • Addressable-analog communication. Thermal sensing rating: fixed-temperature setpoint 135°F • Sleek, low-profile design. (57°C). • Two-wire SLC connection. • Rotary, decimal addressing: 01-159 with MS-9600UDLS ELECTRICAL SPECIFICATIONS and MS-9600LS series systems, and 01-99 with MS- Voltage range: 15 – 32 volts DC peak. 9200UDLS(C) Firmware 4. Standby current (max. avg.): 300 μA. • Addresses can be viewed and changed without electronic Loop resistance: 50 ohms maximum; varies according to programmers. control panel used. Refer to panel installation manuals. • Dual bi-color LED design provides 360° viewing angle. LED current (max.): 6.5 mA @ 24 VDC (“ON”). • LEDs lock red when in alarm. In LiteSpeed™, LEDs flash green in standby for normal condition. Installation • Built-in tamper-resistant feature. • Constructed of off-white fire-resistant plastic, designed to The AD355(A) plug-in detector uses a separate base to sim- commercial standards, and offers an attractive appearance. plify installation, service, and maintenance. A special tool allows maintenance personnel to plug-in and remove detec- • SEMS screws for wiring of the separate base. tors without using a ladder. Suitable mounting base boxes • Several base options, including relay, isolator, and sounder. include: • Built-in functional test switch activated by external magnet. • 4.0" (10.16 cm) square box. • Listed to UL 268. • 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box. • Single-gang box (except relay or isolator base). Specifications NOTE: The AD355(A) detector has the unique ability to adjust Sensitivity: auto-adjusting levels: 1 to 2%/ft. and 2 to 4%/ft. sensitivity according to the environment, based on heat and with classic CLIP systems; 1 to 2, 2 to 3, and 3 to 4%/ft. with smoke levels. Avoid installing these detectors in locations that are LiteSpeed™ systems; fixed-sensitivity levels: 1, 2, and 4%/ft. susceptible to rapid and high temperature changes. An example of an incorrect application would be near or in line with the output of a self-contained heater. DF-52386:C • 12/07/2011 — Page 1 of 2
- 2. Agency Listings and Approvals These listings and approvals apply to the modules specified in this. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. • UL Listed: S1059. • ULC Listed: S1059. • MEA Listed: 243-02-E. • FM Approved. • CSFM: 7272-0075:0194. Ordering Information NOTE: “A” suffix indicates ULC Listed model. AD355: Low-profile intelligent multi-sensor detector. AD355A: Same as AD355 but with ULC Listing. INTELLIGENT BASES NOTE: “A” suffix indicates ULC Listed model. NOTE: The detector’s plug-in base can be changed off for special applications. For details about intelligent bases and their mount- ing, see DF-60059. B210LP(A): Plug-in detector base (included); standard U.S. flanged low-profile mounting base. B210LPBP: Bulk pack of B210LP; package contains 10. B501(A): Flangeless mounting base. B501BP: Bulk pack of B501; package contains 10. B200SR(A): Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Replaces B501BH series bases in retrofit applications. B224RB(A): Relay base Screw terminals: up to 14 AWG (2.0 mm²). Relay type Form-C. Rating: 2.0 A @ 30 VDC resistive; 0.3 A @ 110 VDC inductive; 1.0 A @ 30 VDC inductive. B224BI(A): Isolator base. Maximum: 25 devices between iso- lator bases. ACCESSORIES F110: Retrofit flange to convert B210LP to match the B350LPB350LP profile, or to convert older high-profile bases to low-profile. F110BP: Bulk pack of F110; package contains 15. F210: Replacement flange for B210LP(A) base. RA100Z(A): Remote LED annunciator. 3 – 32 VDC. Fits U.S. single-gang electrical box. Supported by B210LP(A) and B501(A) bases only. SMB600: Surface mounting kit for use with B210LP(A). M02-04-00: Test magnet. M02-09-00: Test magnet with telescoping handle. XR2B: Detector removal tool. Allows installation and/or removal of LiteSpeed™ Series detector heads from base in high ceiling installations. ADAPT® and Fire•Lite are registered trademarks and LiteSpeed™ is a T55-127-010: Detector removal tool without pole. trademark of Honeywell International Inc. ©2011 by Honeywell International Inc. All rights reserved. Unauthorized use XP-4: Extension pole for XR2B. Comes in three 5-foot (1.524 of this document is strictly prohibited. m) sections. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Made in the U.S. A. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 2 of 2 — DF-52386:C • 12/07/2011