Adaptive rfc troubleshooting guide
0 likes281 views
This document provides troubleshooting guidance for common issues encountered when using Adaptive RFC in Web Dynpro Runtime for Java. It addresses errors like NoClassDefFoundError, logon failures, null pointer exceptions, connection pool errors, and cases where ABAP data dictionary changes are not reflected. The document aims to help customers resolve issues by referring to potential causes and solutions before seeking support from SAP.
![© 2006 SAP AG 8
Solutions:
1. Please run Adaptive RFC within the J2EE engine environment only and not try to run it outside with
jar references
2. The problem could be that the SLD does not contain logon groups for the R/3 system you refer to
via message server connection (I've just checked this by creating a new JCO destination to R/3
LRF, client 000). You can see this in the step "Message Server Connection" of the Creation wizard
where logon groups and system name remain empty.
7. “IndexOutOfBoundsException Error”
You get an error like the below with a stack trace
Solution:
This is a Web Dynpro bug. You need a fix. You need to move to the latest Web Dynpro runtime patch.
8. “RFC Connection Pool Resource” Error
You get an exception trace with a message that the connection pooled is exhausted, something like the
below.
Likely Cause:
Connections for Metadata and data JCO destinations are maintained in pools. Connections at runtime are
requested from the pool and returned to the pool when not used. A pooled RFC connection is allocated much
Failed to create new JCO client connection AII_WD_RFC_METADATA_DEST:
com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining
JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.
java.lang.IndexOutOfBoundsException:Attribute index 10 Size
Cause:
Exception(java.lang.IndexOutOfBoundsException: Attribute index 10 Size:
[EXCEPTION]
{0}#1#com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE:
Connection pool SAP_R3_SelfServiceGenerics_FRSTEI2.ADM_DE_useSSO is exhausted. The current
pool size limit (max connections) is 10 connections. at
com.sap.mw.jco.JCO$Pool.getClient(JCO.java:5314)](https://image.slidesharecdn.com/adaptiverfc-troubleshootingguide-181004171059/85/Adaptive-rfc-troubleshooting-guide-8-320.jpg)
Adaptive rfc troubleshooting guide
- 1. SDN Contribution © 2006 SAP AG 1 Adaptive RFC- Troubleshooting Guide Applies to: Adaptive RFC Models in Web Dynpro Runtime for Java, NW04 SP18 onwards Summary The intention of writing this article is to document some of the most common mistakes and issues one encounters during the usage of Adaptive RFC. This should serve as a FAQ checklist which customers can refer to before they seek help from SAP. This also can serve as a reference guide for SAP Global Support looking to solve problems on Adaptive RFC. The document is written with reference to the previous CSN history over a year on the component. Most Issues occur due to faulty configurations, lack of knowledge or misuse. The document intends to reduce this. Author(s): Arun Bhat J Company: SAP Labs India Private Ltd. Created on: 28th July 2006 Author Bio Arun Bhat works at SAP Labs in the Web Dynpro Development area. He earlier worked in the Mobile Web Dynpro Client area for two years since he joined SAP in Feb 2004. Currently he has been working on Web Dynpro models and Context and has been supporting the NW04 and NW04S releases.
- 2. © 2006 SAP AG 2 Table of Contents 1. NoClassDefFoundError at Runtime Errors like Class “WebDynproExtension not found”.... 3 2. Logon Failure to RFC Are you using SSO/Ticket for JCO Metadata Destination? ............. 4 3. RFC_ERROR_LOGON_FAILURE ....................................................................................... 5 4. NullPointerException in the trace when maintaining JCO destinations................................ 5 5. Errors in Load-Balanced Connection / RFC_ERROR_COMMUNICATION......................... 7 6. “Error obtaining JCO connection” ......................................................................................... 7 7. “IndexOutOfBoundsException Error”.................................................................................... 8 8. “RFC Connection Pool Resource” Error ............................................................................... 8 9. Errors like “GUI and CNTL_ERROR” ................................................................................. 10 10. “Pool Already Exists”........................................................................................................... 10 11. ABAP Data Dictionary changes don’t reflect ...................................................................... 11 12. ARFC Execution shows no result ....................................................................................... 11 Related Content............................................................................................................................. 13 Copyright........................................................................................................................................ 14
- 3. © 2006 SAP AG 3 1. NoClassDefFoundError at Runtime Errors like Class “WebDynproExtension not found” Likely Cause: This No Class Definition Found error is caused because JCO Jars are not deployed on your engine or that the Web Dynpro extensions corresponding to JCO are not deployed .Hence you need to have the “jrfc.sda” containing the newly introduced Web Dynpro extensions deployed on the Engine. Solution: Please refer to note #896787 (which is for NW04 SP) contains the correct “jrfc.sda” .This is for SP14 on wards. One of the model Classes/Types not Found You see an error like Likely Causes: The most likely reason for this kind of an error could be the follows • The backend to which to connect at Runtime is not the same as the backend from which you imported the model. This could cause inconsistencies. You need to run with the same backend from where you imported your model or the version of the RFC in the backend used at runtime must be compatible to the one used to import the model. • Data types have changed in the backend, such that the “Type” you imported earlier no longer exists. You need to re-import the model again. Solution: • In case 1 above you need to have one backend from where you have imported the model to where you run this. This avoids inconsistencies. • In case 2 above you need to re-import the model again as suggested. Detailed Error java.lang.NoClassDefFoundError: com/sap/mw/jco/webas/WebDynproExtension com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type extern:com.sap.tcs.demo.model.types.CompanyListModel:com.sap.tcs.demo.mo del.types.Bapi0014_1 could not be loaded: com.sap.tcs.demo.model.types.Bapi0014_1 does not exist
- 4. © 2006 SAP AG 4 2. Logon Failure to RFC Are you using SSO/Ticket for JCO Metadata Destination? If you are using SSO ticket for authorization while defining a metadata JCO Destination you might see an exception like the one above. Username/Password is the only valid Authorization concept while you define your Metadata JCO Destinations. Never try to use SSO or ticket in your security settings while defining metadata JCO Destinations. At least from SP18 onwards there are validity checks in the content administrator which prevent you from using SSO/ticket for metadata JCO destinations. Please observe in the above figure that you need to only select username/Password combination here, as seen in the Content Admin. RfcException: message: ‘Name’ or ‘Password’ missing Return code: RFC_SYS_EXCEPTION(3) error group: 103 key: RFC_ERROR_LOGON_FAILURE
- 5. © 2006 SAP AG 5 3. RFC_ERROR_LOGON_FAILURE The trace contains a message like “SSO ticket is not authorized” • Likely Cause 1: Most probably the Administrator user you've used on the J2EE side to logon for Web Dynpro Content Admin / test JCO destination does not exist in the R/3 system. Solution: Get a valid user for the R/3 system that is used by your SSO. Try logging in through the SAP Logon window. If this doesn’t work you need to get an authorized user until which the JCO wouldn’t work • Likely Cause 2: You see an exception with a message like the below The SSO ticket has indeed expired .The default expiry time is 8 hrs. If you leave a system for more than this time, the ticket will expire. In that case you might need to increase the timeout. There was also a bug before NW04 S14 on the Web Dynpro runtime on this. If you think you have a valid ticket and you are using something older than SP14 please upgrade to latest SP. 4. NullPointerException in the trace when maintaining JCO destinations You see an exception with a message like the below com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: System received an expired SSO ticket NullPointerException, maintaining jco destinations . java.lang.NullPointerException #at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFact ory.java:983) #at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.jav a:485)
- 6. © 2006 SAP AG 6 Likely Causes: 1. Some fields for the backend system used to setup the JCO destination are not updated properly (i.e. empty) in SLD. Once you have configured your SLD please also ensure that you have selected the relevant “Message Server Connection”. The Message Server, System Name and Logon Group must not be left empty. Ensure that SLD contains up-to-date and complete information about backend systems (Please refer to documentation on SLD on how to have this updated. This is provided in the link at the end of the document). 2. In general you also need to ensure that the SLD is setup properly. Click on the “Test Connection” to check that the SLD is up and running.
- 7. © 2006 SAP AG 7 5. Errors in Load-Balanced Connection / RFC_ERROR_COMMUNICATION You see an error something like the below Likely Causes: 1. The R/3 which you are trying to connect to is down or overloaded. Please login through the SAP- Logon to check if this works. 2. The most likely reason could be that the RFC communication service is not maintained for the R/3 system you want to use on the J2EE. Solution: The solution is with respect to Point 2 above 1. In the file %windir%system32driversetcservices add an entry sapms<SID> <PORT>/tcp" (<SID> = R/3 system ID, <PORT> = message server port). 2. Run "Update SAPPCADM" in Windows Start / SAPPCADM. This will (among other things) update the above mentioned file with data for SAP internal R/3 systems. This is only for Internal SAP use. The error only occurs for "load balanced" connections as only these need this message server entry. 6. “Error obtaining JCO connection” In the trace you could see an error like “Error while obtaining JCO Destination”. This could be because of several reasons. 1. The error occurs as WD-APIs for creating/checking JCO destinations are used from outside the Web Dynpro Runtime (calls to “WDSystemLandscape” methods from a servlet deployed to the J2EE). Since Web Dynpro Runtime-API implementation, in general, needs environment information like current user, which is not available for applications not running inside the Web Dynpro Runtime this would not work. 2. You see a error like RFC_ERROR_COMMUNICATION with error “service sapmsXYZ unknown"
- 8. © 2006 SAP AG 8 Solutions: 1. Please run Adaptive RFC within the J2EE engine environment only and not try to run it outside with jar references 2. The problem could be that the SLD does not contain logon groups for the R/3 system you refer to via message server connection (I've just checked this by creating a new JCO destination to R/3 LRF, client 000). You can see this in the step "Message Server Connection" of the Creation wizard where logon groups and system name remain empty. 7. “IndexOutOfBoundsException Error” You get an error like the below with a stack trace Solution: This is a Web Dynpro bug. You need a fix. You need to move to the latest Web Dynpro runtime patch. 8. “RFC Connection Pool Resource” Error You get an exception trace with a message that the connection pooled is exhausted, something like the below. Likely Cause: Connections for Metadata and data JCO destinations are maintained in pools. Connections at runtime are requested from the pool and returned to the pool when not used. A pooled RFC connection is allocated much Failed to create new JCO client connection AII_WD_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc. java.lang.IndexOutOfBoundsException:Attribute index 10 Size Cause: Exception(java.lang.IndexOutOfBoundsException: Attribute index 10 Size: [EXCEPTION] {0}#1#com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool SAP_R3_SelfServiceGenerics_FRSTEI2.ADM_DE_useSSO is exhausted. The current pool size limit (max connections) is 10 connections. at com.sap.mw.jco.JCO$Pool.getClient(JCO.java:5314)
- 9. © 2006 SAP AG 9 faster than a new connection. Therefore, increasing the pool size will optimize the time needed to get a new connection. Hence after a timeout the connections are returned to a pool when they not used.. There is one instance of a metadata JCO Destination and ‘n’ instances of data destinations for ‘n’ instances of an application say running in the same I-view of the portal. The below document “How to Compute JCO destination Settings” explains this in greater detail Solution: 1. Increase the number of connections allowed for the pool (setting "Maximum Connections" for JCO destination) 2. Decrease the lifetime of a connection in the pool (setting "Connection Timeout") These settings can be changed via the Web Dynpro Content Admin for the JCO destinations used by Web Dynpro applications in question (only for the Data Destination and not metadata destination). Find more information on these settings in the section "Create a new JCO destination" of the doc for WD Content Admin in SDN: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e- d3ff7eb1d16e In addition the following SDN doc on how to compute JCO destination settings may also be useful. This one is especially of interest to consultants to configure the JCO Destinations. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af- be6f4a6f61d1
- 10. © 2006 SAP AG 10 9. Errors like “GUI and CNTL_ERROR” You see errors with stack traces which contain messages like the below. Likely Cause: The RFC function module you call via Web Dynpro Adaptive RFC model must not contain / call any ABAP statements using SAPGUI dialog processing logic; this cannot be handled remotely as no SAPGUI is available (the error messages you get also point to this). Solution: Implement the RFC function module in a way that it does not use any ABAP dialog processing logic; other wise it is bound to ABAP environment and can only run there. 10. “Pool Already Exists” An Error like something below Likely Cause: This is due to Web Dynpro applications starting concurrently and trying to create the pool holding JCO connections to be used by Adaptive RFC in Web Dynpro applications - the error occurs if names are equal and synchronization does not prevent the second Web Dynpro application from trying to create the pool again. Occurrence of this error is quite unlikely as it heavily depends on thread scheduling of the Web Dynpro applications (so factors influencing it are system load, OS, etc.). Solution: We provide an improvement fixing this problem with NW04 SP16 .So if you are using something older than SP16 please upgrade. A pool with the identifier 'SAP_R3_SelfServiceGenerics_TRAV03_EN_useSSO' already exists 1. MESSAGE ID = "DC", MESSAGE NUMBER = "006", MESSAGE = "Control Framework: Fatal error - GUI cannot be reached". 2. MESSAGE ID = "SY", MESSAGE NUMBER = "002", MESSAGE = "Exception condition CNTL_ERROR raised." 3. MESSAGE ID = "00", MESSAGE NUMBER = "359",and it is a terminate message.
- 11. © 2006 SAP AG 11 11. ABAP Data Dictionary changes don’t reflect You have changed something in the backend in the ABAP Data Dictionary and you either get an error or you see that your changes are not reflecting. Likely Cause: Several stacks like Web Dynpro, Metadata Interface and JCO etc read the ABAP metadata and cache it on the J2EE Engine. Hence the older metadata still remains cached. Solution: 1. If the interface of a function module is changed on the ABAP side, the restart of the J2EE application server updates the metadata caches on Java side. A restart of the ABAP application server is not necessary. 2. People think about an option to update the metadata cache without a restart of the J2EE application server. But this is currently not possible. 12. ARFC Execution shows no result You run the adaptive RFC execute and see that you don’t get any result on the output after execution. However, when you run the RFC on the ABAP workbench you see the output. Likely Cause: This kind of problem has largely been attributed to customers not using the Adaptive RFC in the right way in their implementation. Consider the BAPI “Bapi_Flight_Getlist” with “Bapi_Flight_Getlist_Output” as Output and “Bapi_Flight_Getlist_Input” as Input. “Bapisfldat” has a relation to “Bapi_Flight_Getlist_Input” .All the UI element mappings for the Bapisfldat and output will have to happen through this context with the mappings through the Bapi_Flight_Getlist_Input. Below is the sample code as I would write it. Remember you have to write the execute()and the Bapi_Flight_Getlist_Output will have to be mapped to the table where you want to see the result.
- 12. © 2006 SAP AG 12 Solution/Common mistakes: 1. People miss out on Line no1 and use Line no.9 directly. Execute of “BAPI_Name_Input” cannot happen until you haven’t created one. 2. Sometimes people miss out on binding the Input to the context like in Line no 6. 3. Whenever there are relating objects involved which you use to set/get values to the BAPI ,their Java representations have to be explicitly created and assigned with add/setXXX methods to the BAPI_Name_Input / BAPI_Name_Output. For example “Bapisfldat” above is created in Line no.3 and assigned to “bapiInput” in Line no 4. Bapi_Flight_Getlist_Input bapiInput = new Bapi_Flight_Getlist_Input(); 1 Bapisfldat row1 = new Bapisfldat(); 2 Bapisfldat row2 = new Bapisfldat(); 3 bapiInput.addFlight_List(row1); 4 bapiInput.addFlight_List(row2); 5 wdContext.nodeBapi_Flight_Getlist_Input().bind(bapiInput); 6 IWDMessageManager manager = wdComponentAPI.getMessageManager(); 7 try{ 8 wdContext.currentBapi_Flight_Getlist_InputElement().modelObject().execute(); 9 wdContext.nodeOutput().invalidate(); 10 } catch(WDDynamicRFCExecuteException ce) { manager.reportException(ce.getMessage(), false); }
- 13. © 2006 SAP AG 13 Related Content Please include at least three references to SDN documents or web pages. • Web Dynpro forum at SDN https://www.sdn.sap.com/irj/sdn/forum?forumID=52 • Web Dynpro Administration https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/b143cb42-0a01-0010- d29b-8a2aa11a2323 • How to Use the Web Dynpro Content Administrator https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e- d3ff7eb1d16e • How to Compute JCO destination Settings https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af- be6f4a6f61d1
- 14. © 2006 SAP AG 14 Copyright © Copyright 2006 SAP AG. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice. Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. Microsoft, Windows, Outlook, and PowerPoint are registered trademarks of Microsoft Corporation. IBM, DB2, DB2 Universal Database, OS/2, Parallel Sysplex, MVS/ESA, AIX, S/390, AS/400, OS/390, OS/400, iSeries, pSeries, xSeries, zSeries, z/OS, AFP, Intelligent Miner, WebSphere, Netfinity, Tivoli, Informix, i5/OS, POWER, POWER5, OpenPower and PowerPC are trademarks or registered trademarks of IBM Corporation. Adobe, the Adobe logo, Acrobat, PostScript, and Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. Oracle is a registered trademark of Oracle Corporation. UNIX, X/Open, OSF/1, and Motif are registered trademarks of the Open Group. Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame, VideoFrame, and MultiWin are trademarks or registered trademarks of Citrix Systems, Inc. HTML, XML, XHTML and W3C are trademarks or registered trademarks of W3C®, World Wide Web Consortium, Massachusetts Institute of Technology. Java is a registered trademark of Sun Microsystems, Inc. JavaScript is a registered trademark of Sun Microsystems, Inc., used under license for technology invented and implemented by Netscape. MaxDB is a trademark of MySQL AB, Sweden. SAP, R/3, mySAP, mySAP.com, xApps, xApp, SAP NetWeaver, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and in several other countries all over the world. All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary. These materials are subject to change without notice. These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. These materials are provided “as is” without a warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SAP shall not be liable for damages of any kind including without limitation direct, special, indirect, or consequential damages that may result from the use of these materials. SAP does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. SAP has no control over the information that you may access through the use of hot links contained in these materials and does not endorse your use of third party web pages nor provide any warranty whatsoever relating to third party web pages.
- 15. © 2006 SAP AG 15 Any software coding and/or code lines/strings (“Code”) included in this documentation are only examples and are not intended to be used in a productive system environment. The Code is only intended better explain and visualize the syntax and phrasing rules of certain coding. SAP does not warrant the correctness and completeness of the Code given herein, and SAP shall not be liable for errors or damages caused by the usage of the Code, except if such damages were caused by SAP intentionally or grossly negligent.