Advanced motion controls servo drive catalog

Everything’s possible.
Overview
S e r v o D r i v e
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com

i
About ADVANCED Motion Controls
ADVANCED Motion Controls has earned a reputation for being a flexible and affordable manufacturer of quality high
performance and high power density servo drives. Camarillo California is home to our state-of-the-art 80,000 square
foot facility that integrates Engineering, Manufacturing, Testing and Support in a single location. Using our standard
product line as a starting point our customers know they can specify modifications and custom solutions to solve their
specific problems. This frees our customers to design systems without the constraints imposed by other servo drive
manufacturers.
25 Years of Excellence
Any Motor, Any Controller, Any Feedback! 25 years of servo drive
Our core business is servo drives. We offer hundreds of standard models, and if we don’t have what you need we can work
with you to create a custom solution that does. Our servo drives can be found all over the world in the highest performance
applications, the harshest environments as well as working reliably in day to day operations throughout the world.
Finding the right ADVANCED Motion Controls’ servo drive for your application
is easy. Enter key parameters into the Automated Servo Drive Selection Tool at
www.a-m-c.com, and automatically receive a list of servo drives that meet your
requirements. You can also browse through our Servo Drive Family Product Tables,
or if you already know the model number, simply enter it into the Product Resource
Center to find the appropriate datasheet, installation manual, and product drawing.
manufacturing, with over
2 million servo axes built
and shipped worldwide!
235

Company and Product Capabilities 1
Click&Move® 3
DigiFlex® Performance™ Digital Servo Drives 5
DPC series - CANopen panel mount 7
DZC series - CANopen pcb mount 8
DPE series - EtherCAT® panel mount 9
DZE/DZS series - EtherCAT® pcb mount 10
DPR series - RS485/232 panel mount 11
DZR series - RS485/232 pcb mount 12
Analog Servo Drives 13
B, BD, BE, and BX series - Brushless panel mount 15
AZ series - Brushless/Brushed pcb mount 16
Brushed panel mount 17
S series - Sinusoidal commutation drives 18
Extended Environment Servo Drives 19
DZX series - Extended Environment digital pcb mount 21
AZX series - Extended Environment analog pcb mount 22
M/V™ Series Vehicle Mount Motor Controllers 23
DVC series - vehicle mount digital motor controllers 25
AVB/AB series - vehicle mount analog motor controllers 26
Custom Servo Drive Capabilities 27
ii
ADVANCED Motion Controls Servo Drive Overview
ELECTROMATE
www.electromate.com
For Company Information, Product Datasheets, Installation Manuals and Downloads visit www.a-m-c.com
Sold & Serviced By:

Sold & Serviced By:
1
Company and Product Capabilities
Networks
ADVANCED Motion Controls offers a variety of network options for
connecting servo drives in a multi-axis configuration. Choosing the right
network depends on a variety of factors such as required bandwidth,
update rate, performance, and cost. Currently supported network options
are: CANopen, EtherCAT®, RS232, RS485.
RS-485/232
serial
Motors
As a company whose core business is servo drives we have to be
compatible with as many motors and motor technologies as possible. We
have servo drives that work with: Brushed DC, Brushless: AC & DC, Linear
& Rotary, AC Induction, Voice Coil, Trapezoidal & Sinusoidal commutation.
Many of our drives can work with all of the above with only a few minor
configuration settings.
Feedback
To give our customers the greatest flexibility we offer a wide variety
of motor feedback options. Standard feedback options include: Halls,
Incremental Encoder, Resolver, 1Vp-p Sine/Cosine Encoder, Stegmann
Hiperface®, Heidenhain EnDat® and Tachometer. On our DigiFlex®
Performance™ drives we also have the option for auxiliary feedback for
dual loop control.
Accessories
As a convenience to our customers we offer power supplies, filter cards,
shunt regulators and mounting cards to complement our servo drives.
EtherCAT® - EtherCAT is a registered trademark and patented
technology, licensed by Beckhoff Automation GmbH, Germany.
The ADVANCED Motion Controls’ EtherCAT interface follows the
ETG.1000.6 EtherCAT Application Layer protocol specification and the
ETG.6010 Implementation guideline for CiA402 drive profile.
CANopen - An open standard embedded machine control protocol
developed for the CAN physical layer, following the CiA (CAN in
Automation) DS301 communications profile and the CiA DSP402
device profile
RS485/232 - ADVANCED Motion Controls’ proprietary serial protocol,
a byte-based, binary, master-slave standard to access drive commands.
We also have the ability to quickly produce custom DigiFlex® drives
utilizing Ethernet TCP/IP, Ethernet Powerlink, or many other common types
of network communication.
ELECTROMATE
www.electromate.com

2
Technology and Solutions to Problems
Combining cutting-edge technology and creative engineering, ADVANCED Motion Controls is able to design and manufacture high quality
servo drives capable of delivering high power at a low cost. As the demands of the motion control industry have increasingly asked for better
performance, more features, and simplified integration, ADVANCED Motion Controls has responded by finding resourceful solutions to the
problems faced by OEMs and servo system designers. Whether by implementing innovative design techniques throughout our line of standard
products, or by directly solving a specific customer’s application with a brand-new custom product, ADVANCED Motion Controls has the drive
expertise to take on your servo system challenge.
Applications and Industries
ADVANCED Motion Controls is able to utilize our extensive
experience in providing high performance servo drives to
support motion control applications in numerous industries.
With an ever-expanding customer base across new and
emerging fields, and having been established as a top supplier
for traditional servo solutions, ADVANCED Motion Controls
brings our wealth of diverse motion control knowledge to a wide
variety of industries, including but not limited to:
Assembly Automation and General Factory Machinery
Communications Control
Electric Mobility and Mobile Robotics
Entertainment
Homeland Security and Defense
Inspection Testing and Rapid Prototyping
Lab Automation
Machine Tool and Metalworking
Material Handling and Conveyed Systems
Medical
Packaging
Power Generation and Alternative Energy Sources
Robotics (fixed)
Semiconductor
Simulators
Sold & Serviced By:
ELECTROMATE
www.electromate.com

Sold & Serviced By:
3
Click&Move® (C&M®) Software
Click&Move®
Click&Move® is a Windows-based soft motion and automation solution that uses function blocks described under IEC 61131-3 as the programming
method. Function block programming allows non-programmers to fully develop and implement motion control and automation programs in a GUI
environment. Click&Move also includes a built in graphical HMI that displays the machine operation on screen.
◦◦ Standard PLCopen Function Blocks library for Motion Control is included
◦◦ New Function Blocks can also be created with an encapsulated user C++
program.
Click&Move® programs can run on Windows based PC’s, Motion
Automation Control Cards (MACC), or on embedded ADVANCED Motion
Controls’ servo drives, all at low cost to solve a variety of applications.
Using the PC based approach provides for servo drive and I/O command
update rates in the millisecond range.
Motion Automation Control Card (MACC)
ADVANCED Motion Controls has designed a dedicated MACC with
embedded Click&Move® programming capability. Key highlights are:
◦◦ Based on an ARM microprocessor operating with real-time Linux
◦◦ Stand-alone card with network connections, and can be optionally packaged in a
standard DIN rail plastic case
◦◦ External I/O module connectivity
◦◦ Optional plug-in I/O module with dedicated and user-defined digital and analog I/O
The MACC serves as a general purpose motion/automation
controller:
◦◦ Controlling a network of digital drives and I/Os
◦◦ Controlling servo drives with ±10V torque or velocity command
inputs for lower cost/higher update rate solution
◦◦ Fully functional PLC utilizing C&M programmability and I/O modules
The C&M user program can be developed, compiled and tested on a PC and simply recompiled for the MACC
platform. Once downloaded into the MACC, it can also be debugged via Ethernet UDP/IP. The program may
also be controlled/monitored in real time via the UDP/IP connection by a PC with a client C&M application.
C&M user programs can also be distributed between the PC and the MACC; the fast, time critical portion of
the application can run in the MACC while C&M’s HMI and slower portions run in the PC. Connections made
via Ethernet.
The number of motion axes is only limited by the axis update rate. This axis update rate is influenced by the
size and complexity of the C&M application program.
CLICK&MOVE
S O F T M O T I O N
Machine with
network drives
FBD (Function Block Diagram)
modifications Code Generation
netlist, C++, exe, dll
Exe, Dll
Main Variables
HMI
(Human Machine Interface)
Virtual Axes
Debugger

ELECTROMATE
www.electromate.com

4
MACC with Network Drives and I/O Modules
This solution can meet demands for drive and I/O command update rates in
the few hundred microseconds range. The MACC integrates field bus masters,
such as EtherCAT® or Ethernet Powerlink (EPL), directly or they can be
installed into an external PC.
To lower drive system costs, ADVANCED Motion Controls’ exclusive ‘DxM’
Technology can be utilized. Using only one EtherCAT® drive, other sub-nodes
could be readily connected.
CLICK
AUTOMATION
MACC with Torque or Velocity Mode Drives
The analog outputs of the plug-in I/O module of the MACC are connected to
the ±10V input of torque or velocity mode drives. Non-networked servo drives,
combined with the MACC, provide a system with the lowest overall cost.
This solution can meet demands for drive and I/O command update rates in the 50
microsecond range. However, due to noise and wiring considerations, cable length
between the drives/motors and the controller is limited to within a few meters.
In this case, motor feedback connections are made to the external I/O module’s
dedicated inputs.
To provide additional I/Os, pins of the MACC’s FPGA are buffered and brought out
to an optional connector which can be used by a plug-in I/O expansion card with
an SSI (synchronous serial interface).
MOVE®
SOLUTION
Optional PC with Windows®
(w/ or w/out keyboard)
Ethernet Connection
Position
Feedback
ADVANCED Motion
Controls’ Digital
Servo Drives
Field-bus: CAN, Ethernet (EPL, EtherCAT®)
Third party I/O
module
Optional PC with Windows®
(w/ or w/out keyboard)
MACC with Linux
Ethernet Connection Third party I/O
module
±10V Command
Position
Feedback
Plug-in I/O
Module
For
Velocity
Mode
For
Velocity
Mode
External Digital
and Analog
User I/Os
ADVANCED
Motion Controls’
Analog and/or
Non-networked
Digital Servo
Drives

5
DigiFlex® Performance™ Digital Servo Drives
The family of DigiFlex® Performance™ digital servo drives provide a wide range of options for servo system solutions. DigiFlex®
Performance™ (DP) drives deliver peak power output from 1.5 to 27.4kW, and support an array of feedback options. Driving single phase,
three phase, and closed loop vector motors with the ability to interface with both digital network commands and traditional ±10V analog
commands, DP drives offer a versatile blend of cutting edge technology and proven results.
• Universal servo motor capability by
means of automatic commutation
adjustment
• Variety of feedback options - Absolute
Encoder (Heidenhain EnDat® or
Stegmann Hiperface®), Sin/Cos Encoder,
Incremental Encoder, Hall Sensors,
Resolver, Tachometer
• Full tuning control of Position, Velocity,
and Torque Loops
• Real-time oscilloscope for high-performance
tuning
• Status panel for drive and system
diagnostics
• I/O configuration for over 60 events and
signals
• Dual loop feedback and control -
increases stability and accuracy
• Stand-alone or network configuration
• Standard models in both Panel Mount,
PCB Mount (Z-Drives), and Vehicle
Mount (M/V™ Series Motor Controllers)
• Employs Space Vector Modulation,
resulting in higher bus voltage
utilization and reduced heat dissipation
• Extended Environment versions available
(DZX series Z-Drives)
Sold Serviced By:
ELECTROMATE
www.electromate.com

6
DIGIFLEX® PERFORMANCE™
DIGIFLEX® PERFORMANCE™
Any Controller Any Motor Any Feedback
RS-485/232
Serial
Any Network
DriveWare® 7
Any Environment
DriveWare® 7 is the powerful servo
drive tuning and configuration
software used to commission
and troubleshoot all ADVANCED
Motion Controls DigiFlex®
Performance™ digital servo drives.
All drive limits, control loops
(current, velocity, and position), and
event handling can be configured
in DriveWare. Notable features
include a fully functional multi-channel
oscilloscope, function
generator and user friendly layout
and interface.
ADVANCED Motion Controls’ Exclusive
Innovations in EtherCAT® Connectivity
100ms cycle time
with 1ms jitter
Per axis...
'DxM'™ Technology allows connectivity of up to
3 DZS (sub-nodes) to a single DZE (node) on an
EtherCAT® network, providing control of up to 4
axes of servo motion at a reduced cost.
'DxI/O'™ Technology accomodates 70 additional
digital and analog I/O points for each axis in a
'DxM' configuration, up to 280 I/O total!
Sold Serviced By:
ELECTROMATE
www.electromate.com

7
DPC series - CANopen panel mount
Panel Mount Drives
DPC drives are enclosed by a metal cover and
can be mounted on their spine or flat against
the base.
Communication
◦◦ CANopen Networking
◦◦ RS232 Drive Commissioning
Command Types
◦◦ Over the Network
◦◦ ±10V Analog
◦◦ PWM and Direction
◦◦ Encoder Following
◦◦ Indexing
◦◦ Jogging
Power Range
◦◦ 1.5 - 27.4 kW Peak Power Output
◦◦ 0.8 - 13.7 kW Cont. Power Output
Primary Feedback
◦◦ Absolute Sin/Cos Encoder (Heidenhain
EnDat® or Stegmann Hiperface®)
◦◦ 1Vp-p Sin/Cos Encoder
◦◦ Incremental Encoder
◦◦ Resolver
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Aux. Incremental Encoder
◦◦ Tachometer
To build a model number, select a control module by feedback type, then combine with a power module that suits your system’s
requirements. 24 VDC I/O Control Modules combine with AC Power Modules, and 5VTTL I/O Control Modules combine with DC
Power Modules.
24 VDC I/O Control Modules
DPCANIA- DPCANIE- DPCANIR- DPCANIS-Feedback
Absolute
Encoder
Incremental
Encoder Resolver Sin/Cos
Encoder
AC Power Modules
015S400 015A400 030A400 C060A400 C100A400 030A800 060A800
Supply (VAC) 100-240* 100-240 100-240 200-240 200-240 200-480 200-480
Peak Current (A) 15 15 30 60 100 30 60
Cont. Current (A) 7.5 7.5 15 30 50 15 30
Dimensions (mm) 177 x 123 x 44 177 x 140 x 56 202 x 157 x 70 257 x 183 x 84 257 x 183 x 135 301 x 232 x 92 301 x 232 x 139
*Single Phase AC Only
5VTTL I/O Control Modules
DPCANTE- DPCANTR-Feedback
Incremental
Encoder Resolver
DC Power Modules
020B080 040B080 060B080 015B200 025B200
Supply (VDC) 20-80 20-80 20-80 40-190 20-190
Sold Serviced By:
Peak Current (A) 20 40 60 15 25
Cont. Current (A) 10 20 30 7.5 12.5
Dimensions (mm) 133 x 90 x 36 191 x 112 x 36 191 x 112 x 36 133 x 90 x 36 191 x 112 x 36
Example:
DPCANIS-060A800
Example:
DPCANTR-015B200

Combine to
form model
number
Combine to
form model
number
ELECTROMATE
www.electromate.com

8
DZC series - CANopen pcb mount
Communication
◦◦ USB Drive Commissioning (DZCANTU)
◦◦ RS232 Drive Commissioning (DZCANTE)
Command Types
◦◦ ±10V Analog
◦◦ Indexing
◦◦ Jogging
Power Range
Firmware Selectable Feedback
(DZCANTU)
◦◦ Absolute Sin/Cos Encoder (Heidenhain EnDat®
or Stegmann Hiperface®)
Primary Feedback (DZCANTE)
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
To build a model number, choose a control module then combine with a power module to meet your system’s requirements.
Note that only certain power modules can be combined with each respective control module.
Control Module
DZCANTE-Feedback
Incremental
Encoder
DZCANTE DC Power Modules
012L080 020L080 040L080 060L080 010L200 025L200
Supply (VDC) 20-80 10-80 10-80 10-80 40-175 40-175
Peak Current (A) 12 20 40 60 10 25
Cont. Current (A) 6 12 20 30 5 12.5
Dimensions (mm) 64 x 51 x 18 64 x 51 x 23 76 x 51 x 23 76 x 51 x 23 64 x 51 x 23 76 x 51 x 23
Example: DZCANTE-040L080
Z-Drives Plug-In Integration
DZC drives are packaged in a lightweight and
compact form factor designed to be embedded
directly into a PCB - no wires required! Inverted
baseplate mounting also allows for direct wired
connector access. A common footprint is used for
the different power modules in the series to simplify
prototyping.
ADVANCED Motion Controls offers mounting cards and mating connector kits to simplify the connections between DZC drives and external
system hardware (motors, feedback devices, controllers). These mounting cards are ideal for the prototyping and development stages as well
as implementation into the final system design.
DZCANTE Mounting Cards†
Axes Motor/Power
Connector
Max
Voltage
Max Peak
Current
MC1XDZC02 1 Side-entry screw terminal 175 40
MC1XDZC02-QD 1 Vertical-entry quick-disconnect 175 25
MC1XDZC02-HP1 1 Side-entry screw terminal 80 60
†Mating connector housing and socket contacts can be ordered as a kit using ADVANCED Motion Controls’ part
number KC-MC1XDZ02.
Combine to
form model
number
Control Module
DZCANTU-Feedback
Absolute Encoder
Incremental Encoder
Sin/Cos Encoder
DZCANTU DC Power Modules
020B080 040B080 020B200
Supply (VDC) 20-80 20-80 40-175
Peak Current (A) 20 40 20
Cont. Current (A) 10 20 10
Dimensions (mm) 90 x 64 x 20 90 x 64 x 20 90 x 64 x 20
Example: DZCANTU-020B080
DZCANTU Mounting Cards**
Axes Motor/Power
Connector
Max
Voltage
Max Peak
Current
MC1XDZPC01 1 Side-entry screw terminal 175 40
**Mating connector housing and socket contacts can be ordered as a kit using ADVANCED Motion
Controls’ part numbers KC-MC1XDZP01.
Sold Serviced By:
ELECTROMATE
www.electromate.com

9
DPE series - EtherCAT® panel mount
Communication
◦◦ EtherCAT® Networking - (CoE - based on DSP-
402 device profile)
◦◦ USB Drive Commissioning
Command Types
◦◦ +/-10V Analog
◦◦ Indexing
◦◦ Jogging
Power Range
Firmware Selectable
Primary Feedback
◦◦ Absolute Sin/Cos Encoder (Heidenhain EnDat®,
Stegmann Hiperface®, or BiSS C-Mode)
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
To build a model number, combine the DPEANIU control module with a power module to meet your system's requirements.
24 VDC I/O Control Module
DPEANIU-Feedback
Absolute Encoder
Incremental Encoder
Sin/Cos Encoder
Universal Feedback
DPE drives support all the listed feedback devices simply by
changing the drive firmware. The appropriate firmware can be
uploaded to the drive through DriveWare® and is included with
the software download.
Panel Mount Drives
DPE drives are enclosed by a metal cover and
the base.
Combine to
form model
number
AC Power Modules
015S400 030A400 C060A400 C100A400 030A800 060A800
Supply (VAC) 100-240* 100-240 200-240 200-240 200-480 200-480
Peak Current (A) 15 30 60 100 30 60
Cont. Current (A) 7.5 15 30 50 15 30
DC Power Module
020B080
Supply (VDC) 20-80
Peak Current (A) 20
Cont. Current (A) 10
Dimensions (mm) 167 x 90 x 36
or
Examples:
DPEANIU-015S400
DPEANIU-020B080
Sold Serviced By:
ELECTROMATE
www.electromate.com

10
DZE/DZS series - EtherCAT® pcb mount
To build a model number, select a control module based on the EtherCAT® node type and combine with a power module to
meet your system’s requirements.
Control Modules
DZEANTU- DZSANTU-Node
Type Node Sub-Node
Feedback
Absolute Encoder
Incremental Encoder
Sin/Cos Encoder
Absolute Encoder
Incremental Encoder
Sin/Cos Encoder
DC Power Module
020B080 040B080 020B200
Supply (VDC) 20-80 20-80 40-175
Cont. Current (A) 10 20 10
Examples:
DZEANTU-020B080
DZSANTU-020B080
DZE drives can be used as a stand-alone
EtherCAT® node in a single-axis setup or
as part of a larger multi-axis EtherCAT®
network. DZS drives must be used as sub-nodes
in a ‘DxM’ configuration with a DZE
node.
ADVANCED Motion Controls offers mounting cards to simplify the connections between DZE/DZS drives and external system hardware
(motors, feedback devices, controllers). These mounting cards are ideal for the prototyping and development stages as well as
implementation into the final system design. The MC1XDZPE01 is designed to mount a DZE drive, while the MC4XDZP01 mounts one DZE
drive and three DZS drives in a ‘DxM’ configuration.
Mounting Cards
Axes Motor/Power Connector Max
Voltage
Max Peak
Current*
MC1XDZPE01 1 Side-entry screw terminal 175 40
MC4XDZP01 4 Side-entry screw terminal 175 40
*Per Axis
Universal Feedback
These drives support all the listed feedback devices
simply by changing the drive firmware. The appropriate
firmware can be uploaded to the drive through
DriveWare® and is included with the software download.
Communication
◦◦ EtherCAT® Networking - (CoE - based on
DSP-402 device profile)
◦◦ ‘DxM’™ Technology
Command Types
◦◦ ±10V Analog
◦◦ Indexing
◦◦ Jogging
Power Range
◦◦ 1.5 - 3.3kW Peak Power Output
◦◦ 0.8 - 1.6kW Cont. Power Output
Firmware Selectable Feedback
◦◦ Absolute Sin/Cos Encoder (Heidenhain
EnDat® or Stegmann Hiperface®)
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
DZE/DZS drives are packaged in a lightweight and
prototyping.
Mating Connector Kit
Mating connector housing and socket contacts can be
ordered as a kit using ADVANCED Motion Controls’
part numbers KC-MC1XDZP01 for the MC1XDZPE01
and KC-MC4XDZP01 for the MC4XDZP01.
Combine to
form model
number
Sold Serviced By:
ELECTROMATE
www.electromate.com

11
DPR series - RS485/232 panel mount
Communication
◦◦ RS485/232 Networking and Drive
Commissioning
Command Types
◦◦ Over the Network (All)
◦◦ +/-10V Analog (DPRAxIx)
◦◦ 24V Step and Direction (DPRAHIx)
◦◦ 5V Step and Direction (DPRxLxx)
◦◦ PWM and Direction (All)
◦◦ Encoder Following (All)
◦◦ Indexing (All)
◦◦ Jogging (All)
Power Range
Primary Feedback
◦◦ Absolute Sin/Cos Encoder (Heidenhain EnDat®
or Stegmann Hiperface®)
◦◦ Resolver
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
To build a model number, select a control module by command (see Command Types above) and feedback type, then combine
with a power module that suits your system’s requirements. 24 VDC I/O Control Modules combine with AC Power Modules, and
5VTTL Control Modules combine with DC Power Modules.
24 VDC I/O Control Modules
DPRAHIA- DPRAHIE- DPRAHIR- DPRAHIS- DPRANIE- DPRANIR- DPRNLIE-Feedback
Absolute
Encoder
Incremental
Encoder Resolver Sin/Cos Encoder Incremental
Encoder Resolver Incremental
Encoder
AC Power Modules
015S400 015A400 030A400 C060A400 C100A400 030A800 060A800
Supply (VAC) 100-240* 100-240 100-240 200-240 200-240 200-480 200-480
Peak Current (A) 15 15 30 60 100 30 60
Cont. Current (A) 7.5 7.5 15 30 50 15 30
Dimensions (mm) 177 x 123 x 44 177 x 140 x 56 202 x 157 x 70 257 x 183 x 84 257 x 183 x 135 301 x 232 x 92 301 x 232 x 139
5VTTL I/O Control Modules
DPRALTE- DPRALTR-Feedback
Incremental
Encoder Resolver
DC Power Modules
020B080 040B080 060B080 015B200 025B200
Supply (VDC) 20-80 20-80 20-80 40-190 20-190
Sold Serviced By:
Peak Current (A) 20 40 60 15 25
Cont. Current (A) 10 20 30 7.5 12.5
Dimensions (mm) 133 x 90 x 36 191 x 112 x 36 191 x 112 x 36 133 x 90 x 36 191 x 112 x 36
Example:
DPRAHIE-030A400
Example:
DPRALTR-040B080
RS-485/232
Serial
Panel Mount Drives
DPR drives are enclosed by a metal cover and
the base.
Combine to
form model
number
Combine to
form model
number
ELECTROMATE
www.electromate.com

12
DZR series - RS485/232 pcb mount
To build a model number, combine a power module to meet your system’s requirements with the DZRALTE control module.
Control Module
DZRALTE-Feedback
Incremental
Encoder
DC Power Modules
012L080 020L080 040L080 060L080 010L200 025L200
Supply (VDC) 20-80 10-80 10-80 10-80 40-175 40-175
Peak Current (A) 12 20 40 60 10 25
Cont. Current (A) 6 12 20 30 5 12.5
Example:
DZRALTE-040L080
ADVANCED Motion Controls offers mounting cards and mating connector kits to simplify the connections between DZR drives and external
system hardware (motors, feedback devices, controllers). These mounting cards are ideal for the prototyping and development stages as well
as implementation into the final system design.
Mounting Cards
Voltage
Max Peak
Current
MC1XDZR02 1 Side-entry screw terminal 175 40
MC1XDZR02-QD 1 Vertical-entry quick-disconnect 175 25
MC1XDZR02-HP1 1 Side-entry screw terminal 80 60
RS-485/232
Serial
Communication
◦◦ RS485/232 Networking and Drive
Commissioning
Command Types
◦◦ ±10V Analog
◦◦ 5V Step and Direction
◦◦ Indexing
◦◦ Jogging
Power Range
Primary Feedback
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
DZR drives are packaged in a lightweight and
prototyping.
Mating connector housing and
socket contacts can be ordered
as a kit using ADVANCED
Motion Controls’ part number
KC-MC1XDZ02.
Combine to
form model
number
Sold Serviced By:
ELECTROMATE
www.electromate.com

13
Analog Servo Drives
ADVANCED Motion Controls’ family of Analog Servo Drives provide unparalleled benefits in both simplicity and performance. Drive setup
and operation is more straightforward than digital drives, while acheiving higher bandwidth and faster response times at a lower cost.
Analog drive technology has been a staple of servo system solutions since day one, and our years of experience in building the highest
quality products has created a solid and continuously improving selection of analog drives. A variety of command options, including ±10V
analog, PWM and Direction, dual Sine wave, and specialized electric vehicle commands make the ADVANCED Motion Controls’ family of
analog drives your best choice for proven servo solutions.
• Built-in hardware protection - Over
Current, Over Voltage, Over Temperature,
Short Circuit
• DIP Switches and Potentiometers for loop
tuning, current limit adjustments, and
drive configuration
• Standard models for both brushed and
brushless motor varieties
• Velocity feedback provided by
incremental encoder, Hall Sensors, or
tachometer
• Analog Position Loop control available
• Optical Isolation between high and low
power signals standard on most models
• Current, Velocity, and Fault Monitor
analog output signals
• Status LEDs for power and drive status
• Standard models in both Panel Mount,
PCB Mount (Z-Drives), and Vehicle Mount
(M/V™ Series Motor Controllers)
• Four quadrant regenerative operation
• Extended Environment versions available
(AZX series Z-Drives)
Sold Serviced By:
ELECTROMATE
www.electromate.com

14
Input Command Signals
»»Single-ended or differential ±10V analog input
command used to adjust the motor current, voltage
or speed.
Controller
Output
Servo
Drive
Input
PWM
Direction
PWM
Direction
+Ref
-Ref
+10V
-10V
+Ref
-Ref
±10 V Analog
PWM Direction
Dual Sine Wave
+Ref B
-Ref B
+Ref B
-Ref B
+Ref A
-Ref A
+Ref A
-Ref A
»»Direct PWM - PWM Direction signals translate
directly to the output, providing direct control of the
output duty-cycle and switching frequency. Direct
PWM has the fastest response of all our products as
there are no gain stages or integrators.
»»Torque Mode PWM - The PWM signal is converted
to an analog voltage in the drive used as the
command signal into the current loop (similar to
current mode in other products). The input duty-cycle
controls the drive's output current.
»»Two sinusoidal command signals that correspond
to the motor phase current that control the
commutation and torque to the motor.
Controller
Output
Servo
Drive
Input
Controller
Output
Servo
Drive
Input
ANALOG SERVO DRIVES
ANALOG SERVO DRIVES
Simplicity
Proven Track Record
Performance
Sold Serviced By:
ELECTROMATE
www.electromate.com

Sold Serviced By:
15
B, BD, BE, and BX series - Brushless panel mount
Command Types
◦◦ ±10V Analog
◦◦ Direct PWM and Direction (‘BD’ Drives)
◦◦ Torque Mode PWM and Direction (‘BDC’ Drives)
Potentiometers
◦◦ Loop Gain
◦◦ Current Limit
◦◦ Reference Gain
◦◦ Offset/Test Signal
Primary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
Modes of Operation
◦◦ ‘B’ Drives - Current, Hall Velocity, Encoder
Velocity
◦◦ ‘BE’ Drives - Encoder Velocity
◦◦ ‘BX’ Drives - Current, Hall Velocity, Encoder
Velocity
◦◦ ‘BD’ and ‘BDC’ Drives - Torque Mode PWM,
Direct PWM
Power Range
To select a model number, choose a series based on the mode of operation, then find a model that matches your system’s power
requirements. Note that not all listed modes of operation are included on every drive in the series. Additional ordering options
are also available. Consult the drive datasheet for specific modes and ordering options.
‘B’ Series Models - Current, Hall Velocity, Encoder Velocity
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
B15A8 - 20-80 15 7.5 129 x 76 x 25
BE15A8-H - 20-80 15 7.5 129 x 76 x 25
B30A8 - 20-80 30 15 187 x 112 x 25
B25A20AC 30-125 40-190 25 12.5 187 x 107 x 62
B25A20I - 40-190 25 12.5 187 x 112 x 25
B40A20I - 40-190 40 20 187 x 112 x 25
B30A40 - 60-400 30 15 203 x 143 x 41
B30A40AC 45-265 60-400 30 15 203 x 166 x 103
B40A40AC 45-265 60-400 40 20 235 x 164 x 114
B40A40 - 60-400 40 20 235 x 159 x 64
B060A400AC 200-240 255-373 60 30 257 x 183 x 84
B100A400AC 200-240 255-373 100 50 257 x 183 x 135
‘BE’ Series Models - Encoder Velocity
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
BE15A8 - 20-80 15 7.5 129 x 76 x 25
BE30A8 - 20-80 30 15 187 x 112 x 25
BE25A20AC 30-125 40-190 25 12.5 187 x 107 x 62
BE25A20I - 40-190 25 12.5 187 x 112 x 25
BE40A20I - 40-190 40 20 187 x 112 x 25
‘BX’ Series Models - Current, Hall Velocity, Encoder Velocity
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
BX30A8 - 20-80 30 15 187 x 112 x 37
BX25A20AC 45-125 60-200 25 12.5 187 x 107 x 62
BX25A20 - 60-200 25 12.5 187 x 112 x 37
‘BD’ Series Models - Direct PWM
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
BD15A8 - 20-80 15 7.5 129 x 76 x 25
BD30A8 - 20-80 30 15 187 x 112 x 25
BD25A20AC 30-125 40-190 25 12.5 187 x 107 x 62
BD25A20I - 40-190 25 12.5 187 x 112 x 25
‘BDC’ Series Models - Torque Mode PWM
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
BDC30A8 - 20-80 30 15 187 x 112 x 37
BDC40A20 - 60-190 40 20 187 x 112 x 37
Panel Mount Drives
These analog brushless drives are enclosed by
a metal cover and can be mounted on their
spine or flat against the base.
ELECTROMATE
www.electromate.com

16
AZ series - Brushless/Brushed pcb mount
AZ drives are packaged in a lightweight and
prototyping.
Command Types
◦◦ ±10V Analog
◦◦ PWM and Direction (Torque Mode)
Modes of Operation
◦◦ Current
◦◦ Encoder Velocity
◦◦ Hall Velocity
◦◦ Duty Cycle (Open Loop)
◦◦ Torque Mode PWM
Power Range
Primary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
Potentiometers
◦◦ Loop Gain
◦◦ Offset
To build a model number, select a control module based on the desired mode of operation, then combine with a power
module to meet your system’s requirements.
AZ Control Modules
AZB... AZBE... AZBH... AZBDC...
Operating Mode Current Encoder Velocity
Duty Cycle
Hall Velocity
Duty Cycle Torque Mode PWM
DC Power Modules
10A4 6A8 12A8 20A8 40A8 60A8 10A20 25A20
Supply (VDC) 10-36 20-80 20-80 10-80 10-80 10-80 40-175 40-175
Peak Current (A) 10 6 12 20 40 60 10 25
Cont. Current (A) 5 3 6 12 20 30 6 12.5
Dimensions (mm) 38 x 38 x 7 64 x 51 x 17 64 x 51 x 17 64 x 51 x 23 76 x 51 x 23 76 x 51 x 23 64 x 51 x 23 76 x 51 x 23
Examples:
AZB20A8
AZBE40A8
AZBDC6A8
ADVANCED Motion Controls offers mounting cards to simplify the connections between AZ drives and external system
hardware (motors, feedback devices, controllers). These mounting cards are ideal for the prototyping and development
stages as well as implementation into the final system design.
Mounting Cards
Voltage
Max Peak
Current
MC1XAZ01 1 Vertical-entry quick-disconnect 175 25
MC1XAZ01-HR 1 Side-entry screw terminal 175 60
Combine to
form model
number
Sold Serviced By:
ELECTROMATE
www.electromate.com

17
Brushed panel mount
To select a model number, choose a series based on the command type, then find a model that matches your system’s power
requirements.
Brushed ±10V Analog Command Models
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
12A8 - 20-80 12 6 129 x 76 x 25
25A8 - 20-80 25 12.5 129 x 76 x 25
30A8 - 20-80 30 15 187 x 112 x 25
50A8 - 20-80 50 25 187 x 112 x 25
120A10 - 20-80 120 60 254 x 130 x 49
16A20AC 30-125 40-190 16 8 187 x 107 x 62
20A20 - 40-190 20 10 129 x 76 x 25
25A20I - 40-190 25 12.5 187 x 112 x 25
30A20AC 30-125 40-190 30 15 187 x 107 x 62
50A20I - 40-190 50 25 187 x 112 x 25
100A40 - 80-400 100 50 235 x 183 x 92
Brushed PWM and Direction Command Models
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
30A8DD - 20-80 30 15 187 x 112 x 25
50A8DD - 20-80 50 25 187 x 112 x 25
25A20DD - 40-190 25 12.5 187 x 112 x 25
50A20DD - 40-190 50 25 187 x 112 x 25
Command Types
◦◦ ±10V Analog
◦◦ Direct PWM and Direction
Potentiometers
◦◦ Loop Gain
Power Range
◦◦ 0.6 - 38kW Peak Power Output
◦◦ 0.3 - 19kW Cont. Power Output
Primary Feedback
◦◦ Tachometer
Modes of Operation (±10V Analog)
◦◦ Current
◦◦ Voltage
◦◦ IR Compensation
◦◦ Velocity
Modes of Operation (PWM and Dir)
◦◦ Direct PWM Current Mode
Panel Mount Drives
These analog brushed drives are enclosed by a
metal cover and can be mounted on their spine
or flat against the base.

Sold Serviced By:
ELECTROMATE
www.electromate.com

18
S series - Sinusoidal commutation drives
Panel Mount Drives
These sinusoidal drives are enclosed by a metal
cover and can be mounted on their spine or
flat against the base.
Command Types
◦◦ 120º Sine
Power Range
◦◦ 0.6 - 19kW Cont. Power Output
Mode of Operation
◦◦ Current
S series drives are the only analog drives offered by ADVANCED Motion Controls with sinusoidal commutation (all digital DigiFlex®
Performance™ models use sinusoidal commutation). S series drives require two specialized sinusoidal command signals from an external
controller that correspond to the motor phase currents and control the commutation and torque to the motor.
To select a model number, choose a model that matches your system’s power requirements.
‘S’ Series Models
Supply
(VAC)
Supply
(VDC)
Peak
Current
(A)
Cont.
Current
(A)
Dimensions
(mm)
S16A8 - 20-80 16 8 129 x 78 x 39
SX25A20 - 60-190 25 12.5 187 x 112 x 37
S30A40 - 60-400 30 15 203 x 143 x 41
S30A40AC 45-270 60-380 30 15 203 x 166 x 103
S60A40 - 60-400 60 30 235 x 160 x 89
S60A40AC 45-270 60-380 60 30 235 x 162 x 155
S100A40 - 60-400 100 50 271 x 234 x 92
All motor feedback is returned to the controller,
which tracks the motor rotor position and outputs
the correct signals to the drive in order to maintain
the proper phase angle.
Sold Serviced By:
ELECTROMATE
www.electromate.com

19
Extended Environment Servo Drives
ADVANCED Motion Controls’ Extended Environment products are designed to operate under harsh thermal and mechanical
extremes. An expanded thermal operating range allows these drives to function in both hot and cold ambient environments,
and enhanced protection against shock and vibration provides additional system ruggedness. Extended Environment drives
also afford benefits for applications in more docile conditions. The superior thermal capabilities reduce or eliminate the need
for cooling systems such as external heat sinks and fans, enabling system designs to be more compact and to improve overall
reliability.
• Ambient operating temperatures
ranging from -40°C to 85°C (-45°F to
185°F)
• Over Temperature heat sink
protection up to 105°C (221°F)
• Thermal rise cycling in about 2
minutes
• Shock up to 15g’s at 11ms
• Vibration up to 30grms on all 3 axes
• Standard models in PCB Mount
(Z-Drives) form factor - Panel
Mount models available as custom
designs
• Designed to assist system
compliance toward:
»»MIL-STD-810F: temperature,
thermal shock, humidity, altitude,
shock vibration
»»MIL-STD-1275D:
characterization of 28VDC
systems
»»MIL-STD-461E: control of
electromagnetic interference
»»MIL-STD-704F: aircraft power
characteristics
»»MIL-HDBK-217: reliability
predictions
• Tested to meet above standards
upon customer request
Sold Serviced By:
ELECTROMATE
www.electromate.com

20
»»User selected I/O and Event Handling
»»Configurable limits gains
»»Distributed network control
»»Comprehensive diagnostics
»»Highest bandwidth possible
»»Dedicated operating modes
»»Highest operating temperature
»»Simplest installed platform
-40°C
AZX/DZX Series
+75°C
DZX Series
+85°C
AZX Series
+100°C and higher!
Custom Drives
Sold Serviced By:
ELECTROMATE
www.electromate.com

Sold Serviced By:
21
DZX series - Extended Environment digital pcb mount
RS-485/232
Serial
DZX drives are packaged in a lightweight and
prototyping.
Communication
◦◦ CANopen or RS485/232 Networking
◦◦ RS232 Drive Commissioning
Command Types
◦◦ ±10V Analog
◦◦ 5V Step and Direction
◦◦ Indexing
◦◦ Jogging
Power Range
Extended Environment
◦◦ -40ºC to +75ºC Ambient Operating Range
◦◦ Shock up to 15g’s
◦◦ Designed to Environmental Engineering
Considerations as defined in MIL-STD-810F
Primary Feedback
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
To build a model number, select a control module based on network communication type, then combine with a power module
to meet your system’s requirements.
DZX Control Modules
DZXCANTE- DZXRALTE-Network
CANopen RS485/232
DC Power Modules
008L080 015L080 040L080
Supply (VDC) 10-80 10-80 10-80
Cont. Current (A) 4 7.5 20
Combine to
form model
number
Example:
DZXCANTE-040L080
ADVANCED Motion Controls offers mounting cards to simplify the connections between DZX drives and external system hardware (motors,
feedback devices, controllers). These mounting cards are ideal for the prototyping and development stages as well as implementation into
the final system design.
Mounting Cards*
Voltage
Max Peak
Current
MC1XDZx02 1 Side-entry screw terminal 175 40
MC1XDZx02-QD 1 Vertical-entry quick-disconnect 175 25
MC1XDZx02-HP1 1 Side-entry screw terminal 80 60
*Replace “x” in the model number with “C” for DZXCANTE drives or “R” for DZXRALTE drives
Mating connector housing and
socket contacts can be ordered
as a kit using ADVANCED
Motion Controls’ part number
KC-MC1XDZ02.
ELECTROMATE
www.electromate.com

22
AZX series - Extended Environment analog pcb mount
AZX drives are packaged in a lightweight and
prototyping.
Command Types
◦◦ ±10V Analog
◦◦ PWM and Direction (Torque Mode)
Modes of Operation
◦◦ Current
◦◦ Encoder Velocity
◦◦ Torque Mode PWM
Extended Environment
◦◦ -40ºC to +85ºC Ambient Operating Range
◦◦ Shock up to 15g’s
◦◦ Designed to Environmental Engineering
Considerations as defined in MIL-STD-810F
Primary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
Potentiometers
◦◦ Loop Gain
◦◦ Offset
Power Range
To build a model number, select a control module based on the desired mode of operation, then combine with a power module
to meet your system’s requirements.
AZX Control Modules
AZXB... AZXBE... AZXBH... AZXBDC...
Operating Mode Current Encoder Velocity
Duty Cycle
Hall Velocity
Duty Cycle Torque Mode PWM
DC Power Modules
8A8 15A8 25A8
Supply (VDC) 10-80 10-80 10-80
Cont. Current (A) 4 7.5 12.5
Combine to
form model
number
Examples:
AZXB8A8
AZXBDC15A8
ADVANCED Motion Controls offers mounting cards to simplify the connections between AZX drives and external system
hardware (motors, feedback devices, controllers). These mounting cards are ideal for the prototyping and development
stages as well as implementation into the final system design.
Mounting Cards
Voltage
Max Peak
Current
MC1XAZ01 1 Vertical-entry quick-disconnect 175 25
MC1XAZ01-HR 1 Side-entry screw terminal 175 60
Sold Serviced By:
ELECTROMATE
www.electromate.com

Sold Serviced By:
23
M/V™ Series Vehicle Mount Motor Controllers
ADVANCED Motion Controls’ family of M/V™ series vehicle mount motor controllers are fully functional, four-quadrant servo
drives purpose designed and built to operate today's modern mobile electric vehicular platforms. Available in both analog and
digital versions and packaged in a compact and rugged IP65 case, M/V series motor controllers provide high power from battery
supplies for either permanent magnet brushed or brushless motors. Whether for traction / propulsion, steering, lifting, or any
other electrically driven actuation, the unmatched power density, high efficiency, low weight, built-in regen, and cool thermal
operation of M/V series motor controllers provide optimum performance for mobile electric vehicular applications.
• Analog (AVB, AB) and Digital (DVC)
models provide solutions for a wide range
of command, configuration, and network
options
• Selectable throttle command inputs: 0-5V
or 0-5kW
• Standard and vehicle-specific I/O for over
60 events and signals
• Compact, Rugged, Vehicle Mount Design -
IP65 Rating
• Watertight I/O, signal, and feedback
connector
• Watertight access panel for drive
configuration and setup
• Selectable modes of operation
• DVC models configurable through
DriveWare® 7, offering the same
capabilities range of DigiFlex®
Performance™ digital servo drives
• AVB and AB models configurable through
DIP Switches and potentiometers
20-54 VDC
250 A. peak
150 A. cont
ELECTROMATE
40-175 VDC
100 A. peak
100 A. cont
40-175 VDC
125 A. peak
80 A. cont
20-80 VDC
200 A. peak
125 A. cont
www.electromate.com

On DVC and AVB models, an external 5kW potentiometer can
be used in either a 3-wire or 2-wire configuration to provide
the command source.
24
M/V™ SERIES MOTOR CONTROLLERS
M/V™ SERIES MOTOR CONTROLLERS
Vehicle Specific I/O
On DVC and AVB models, an external 0 - 5 volt supply
provides the command input source.
0-5kW Potentiometer
M/V series motor controllers feature unique programmable
and dedicated inputs and outputs designed with mobile
electric vehicular applications in mind.
◦◦ Key Switch / Main Contactor Operation
◦◦ Electromagnetic Holding Brake Output
◦◦ Speed Limit Input
◦◦ Reduced Speed Reverse
◦◦ Forward / Reverse Inputs
◦◦ Push (Neutral) Input
◦◦ Horn / Reverse Alarm
Throttle Command Inputs
M/V series motor controllers are configurable for a variety
of different throttle command types common in electric
vehicular applications. Each command type is user-selectable
as standard single-ended, inverse single-ended, wigwag, or
inverse wigwag.
0-5V Analog Voltage
±10V Analog
On DVC and AB models, an external or on-board ±10 volt
supply provides the command input source.
Sold Serviced By:
ELECTROMATE
www.electromate.com

25
DVC series - vehicle mount digital motor controllers
Vehicle Mount Drives
M/V™ drives are packaged in an IP65
ruggedized enclosure designed for mounting
in electric vehicles.
To build a model number combine the DVC control module with a power module to meet your system’s requirements.
M/V™ Digital Control Module
DVC...
Network CANopen
DC Power Modules
250A060 200A100 125A200 100C200
Supply (VDC) 20-54 20-80 40-175 40-175
Peak Current (A) 250 200 125 100
Cont. Current (A) 150 125 80 100
Dimensions (mm) 203 x 140 x 60 203 x 140 x 60 203 x 140 x 60 203 x 140 x 60
Combine to
form model
number
Examples:
DVC250A060
Vehicle Throttle Commands
On DVC models, the command
input type is selected through
DriveWare:
Sold Serviced By:
Mating connector housing, socket contacts, and
seal plugs can be ordered as a kit using ADVANCED
Motion Controls’ part number KC-35AMPSEAL01.
◦◦ Wigwag/Single-Ended Command
Input
◦◦ 3-Wire / 2-Wire External
Potentiometer Command Source
◦◦ Standard / Inverted Inputs
◦◦ Reduced Speed Reverse
M/V™ series
Electric Vehicle Motor Controls
Communication
Power Range
Command Types
◦◦ ±10V Analog
◦◦ Indexing
◦◦ Jogging
Electric Mobility and Vehicle I/O
◦◦ Foward and Reverse Inputs
◦◦ Push Brake Release Input
◦◦ Speed Limit Pot Input
◦◦ Reduced Speed Reverse Input
◦◦ Safe Torque Off Inputs
Primary Feedback
Auxiliary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
Safe Torque Off
DVC models feature dedicated Safe Torque
Off (STO) inputs that prevent any current-generating
energy from reaching the
motor. Functional Safety STO meets SIL 3
per IEC 61800-5-2; tested by NRTL.
ELECTROMATE
www.electromate.com

M/V™ series
Electric Vehicle Motor Controls
26
AVB/AB series - vehicle mount analog motor controllers
Vehicle Mount Drives
M/V™ drives are packaged in an IP65
ruggedized enclosure designed for mounting
in electric vehicles.
Command Types
◦◦ ±10V Analog
◦◦ 0-5kW Potentiometer
◦◦ 0-5V Analog
Power Range
Potentiometers
◦◦ Loop Gain
◦◦ Ramp Time
◦◦ Deadband
Electric Mobility and Vehicle I/O
◦◦ Forward and Reverse Inputs
◦◦ Push Brake Release Inputs
◦◦ Speed Limit Pot Input
◦◦ KeySwitch Master Input
Primary Feedback
◦◦ Hall Sensors
◦◦ Tachometer
Modes of Operation
◦◦ Current
◦◦ Voltage
◦◦ IR Compensation
◦◦ Velocity
To build a model number, select a control module based on the application category, then combine with a power module to meet
your system’s requirements.

M/V™ Analog Control Modules
AVB... AB...
Applications Electric Mobility and Vehicle General Industrial
DC Power Modules
250A060 200A100 125A200 100C200
Supply (VDC) 20-54 20-80 40-175 40-175
Peak Current (A) 250 200 125 100
Cont. Current (A) 150 125 80 100
Dimensions (mm) 203 x 140 x 60 203 x 140 x 60 203 x 140 x 60 203 x 140 x 60
Combine to
form model
number
Examples:
AVB250A060
AB125A200
Mating connector housing, socket contacts, and
seal plugs can be ordered as a kit using ADVANCED
Motion Controls’ part number KC-23AMPSEAL01. ◦◦ Wigwag/Single-Ended Command Input
◦◦ 3-Wire / 2-Wire External Potentiometer Command Source
◦◦ Standard / Inverted Inputs
◦◦ Half Speed Reverse
Vehicle Throttle Commands
On AVB models, DIP switches are used to select the command
input type:
Sold Serviced By:
ELECTROMATE
www.electromate.com

Sold Serviced By:
27
Custom Servo Drive Capabilities
ADVANCED Motion Controls has the capability to promptly develop and
deliver specified products for OEMs with volume requests. Our Applications
and Engineering Departments will work closely with your design team through
all stages of development in order to provide the best servo drive solution for
your system.
Equipped with on-site engineering and manufacturing for quick-turn customs
capabilities, ADVANCED Motion Controls utilizes our years of expertise to
decrease your costs and time-to-market while increasing system quality and
reliability.
Two on-site full SMT production lines, and four on-site engineering labs will design and support OEM solutions as if they
were standard products!
ADVANCED Motion Controls has extensive experience in designing affordable
custom products optimized for OEM’s specific needs. Whether a simple
modification to a standard product or a completely custom design, we can
support and sell custom solutions as if they were standard products.
Examples of Customized Products and Options
◦◦ Optimized Footprint
◦◦ Private Label Software
◦◦ OEM Specified Connectors
◦◦ No Outer Case
◦◦ Increased Current Resolution
◦◦ Increased Temperature Range
◦◦ Custom Control Interface
◦◦ Integrated System I/O
◦◦ Tailored Project File
◦◦ Silkscreen Branding
◦◦ Optimized Base Plate
◦◦ Increased Current Limits
◦◦ Increased Voltage Range
◦◦ Conformal Coating
◦◦ Multi-Axis Configurations
◦◦ Reduced Profile Size and Weight
ELECTROMATE
www.electromate.com

28
Custom products are built on the same equipment and with the same people
as if they were production units, enabling rapid development and fast delivery,
as well as making it easy to make changes before the product is released to
production.
An ISO 9001:2008 certified online documentation workflow insures accuracy and consistency throughout design,
manufacturing, testing, and support of all products.
Advantages to a custom solution with
ADVANCED Motion Controls:
• Reduce project development time and cost
• Simplify integration of motor, controller, power supply,
feedback
• Precisely match sizing requirements
Feel free to contact our Applications Engineering
department for more information on custom solutions!
Sold Serviced By:
ELECTROMATE
www.electromate.com

Partnering with ADVANCED Motion Controls
»»Superior performance and product offering
»»Fast delivery to meet your needs
»»Worldwide factory trained technical and sales support
»»Engineering support available to you on-site
»»Close collaboration with, and an extension of, your engineering team
»»Diverse industrial experiences and knowledge allows us to improve your systems
»»Proud of providing you with the most optimized solutions
»»Passionate about your success
Providing motion control solutions to OEMs is our focus...
Sold Serviced By:
ELECTROMATE Everything’s possible
www.electromate.com

Advanced motion controls servo drive catalog

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Advanced motion controls servo drive catalog (20)

More from Electromate (20)

Recently uploaded (20)

Advanced motion controls servo drive catalog