Advanced motion controls srst80
0 likes161 views
The SRST series shunt regulators are designed to work with regenerative servo drives to dissipate excess energy during braking, preventing the drive from shutting off due to overvoltage. They connect a power resistor across the DC bus to dissipate energy when the bus voltage reaches the shunt voltage setting. Models are available with different shunt voltage ratings and capacitor sizes to accommodate drives up to 400 volts.
![SHUNT REGULATORS
MOUNTING DIMENSIONS
AIDA 01/06/92
(0.13 [3.18])
MOUNTING DIMENSIONS
SHUNT REGULATOR
MDSHREG
E
NTS 1
4.25 [107.95]
3. HIGHEST POINT IN REFERENCE FROM
BASE PLATE SURFACE.
2. HIGHEST POINT IS 2.30 [58.47]
FOR UNITS UNDER A 200V TRIP VOLTAGE, AND
1.90 [48.31] FOR UNITS OVER A 200V TRIP VOLTAGE
NOTES
C UPDATE DWG. FORMAT 02/25/97 RB
8.00 [203.20]
SRST SERIES
1. DIMENSIONS IN [ ] ARE IN MM.
D CHG. ADDRESS ON TITLE BLOCK 02/19/02 RB
2X 0.22 [5.54]
SYM
7.50 [190.50]
2X FULL R.
0.17 [4.37]
7.66 [194.46]
0.25 [6.35]
0.81 [20.62]
0.17 [4.37]
2.13 [53.98]
2X
0.22 [5.54]
SYM
(0.81 [20.65])
SEE NOTE 2
(1.58 [40.01])
E UPDATED BASE PLATE TO CURRENT MOUNTING CONFIGURATION 04/27/05 RB
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com](https://image.slidesharecdn.com/advancedmotioncontrolssrst80-140929212651-phpapp01/85/Advanced-motion-controls-srst80-3-320.jpg)
Advanced motion controls srst80
- 1. SHUNT REGULATORS Shunt Regulators The SRST Series shunt regulator assemblies are designed to work with ADVANCED Motion Controls’ four quadrant regenerative servo drives. During braking most of the stored mechanical energy is fed back into the power supply, which charges the output capacitor to a higher voltage. If the charge reaches the drive’s over-voltage shutdown point, motor control and braking will cease. To ensure smooth braking of large inertial loads the use of a shunt-regulator is recommended. Verify the need for a shunt regulator by operating the drive under the worst case braking condition. If the drive shuts off due to over-voltage (blinking red LED) a shunt regulator is necessary (typically during downward move or deceleration). Model Number Rated Dissipation Capability Clamping Voltage SRST50 95 W 50 VDC SRST70 95 W 70 VDC SRST80 95 W 80 VDC SRST90 95 W 90 VDC SRST175 95 W 175 VDC SRST185 95 W 185 VDC SRST380 190 W 380 VDC SRST400 190 W 400 VDC SRST50, 70, 80, 90, 175, 185 SRST380, 400 Operation Features When the DC Bus reaches the shunt voltage of the shunt regulator assembly, the voltage comparator unit turns on the electronic switch, which connects the R1 power resistor across the DC Bus. This power resistor dissipates the energy from the DC Bus. After the bus voltage is reduced to less than the shunt voltage setting the resistor is disconnected from the bus. A small hysterisis loop allows time between switching. The SRST assemblies are available with standard shunt voltages of 50, 70, 80, 90, 175, 185, 380, and 400 volts. Models SRST50, 70, 80, 90, 175, 185 are designed for use with servo drives up to 200 volts. These models have a 200 VDC, 1200 μF filter capacitor in them. Models SRST380 and SRST400 are designed for use with servo drives up to 400 volts. These models have a 450 VDC, 330 μF filter capacitor in them. Contact factory for custom trip voltages. Dissipates Excess Kinetic or Potential Energy to Prevent Drive Over-Voltage Shut Down Small Size, Low Cost, Ease of Use Agency Approvals US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E140173. Note that machine components compliant with UL are considered UL registered as opposed to UL listed, as would be the case for commercial products. Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6- 2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock. RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. SHUNT REGULATORS SPECIFICATIONS Power Specifications Description Units For Shunt Voltages Under 200 V For Shunt Voltages Over 200 V Fuse - 3 A Motor Delay rated @ 250 VAC Filter Capacitance (C1) 1 μF 1200 330 Dissipation Capabilities W 95 190 Resistance (R1) Ω 5 20 Mechanical Specifications Description Units For Shunt Voltages Under 200 V For Shunt Voltages Over 200 V Size (H x W x D)2 mm (in) 203.2 x 108.0 x 66.70 (8.00 x 4.25 x 2.63) 203.2 x 108.0 x 54.0 (8.00 x 4.25 x 2.13) Weight kg (lbs) 0.14 (0.32) 0.21 (0.46) Notes 1. Filter capacitance will add to existing DC Bus capacitance. Increased inrush current may occur as a result. 2. Worst-case depth dimension. See mounting dimensions for additional details. BLOCK DIAGRAM SHUNT REGULATOR Voltage Comparator + RED WIRE TO SERVO DRIVE DC BUS GND, BLACK WIRE **Resistor Value Depends on Model C1 R1** SWITCH Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 3. SHUNT REGULATORS MOUNTING DIMENSIONS AIDA 01/06/92 (0.13 [3.18]) MOUNTING DIMENSIONS SHUNT REGULATOR MDSHREG E NTS 1 4.25 [107.95] 3. HIGHEST POINT IN REFERENCE FROM BASE PLATE SURFACE. 2. HIGHEST POINT IS 2.30 [58.47] FOR UNITS UNDER A 200V TRIP VOLTAGE, AND 1.90 [48.31] FOR UNITS OVER A 200V TRIP VOLTAGE NOTES C UPDATE DWG. FORMAT 02/25/97 RB 8.00 [203.20] SRST SERIES 1. DIMENSIONS IN [ ] ARE IN MM. D CHG. ADDRESS ON TITLE BLOCK 02/19/02 RB 2X 0.22 [5.54] SYM 7.50 [190.50] 2X FULL R. 0.17 [4.37] 7.66 [194.46] 0.25 [6.35] 0.81 [20.62] 0.17 [4.37] 2.13 [53.98] 2X 0.22 [5.54] SYM (0.81 [20.65]) SEE NOTE 2 (1.58 [40.01]) E UPDATED BASE PLATE TO CURRENT MOUNTING CONFIGURATION 04/27/05 RB Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 4. SHUNT REGULATORS CUSTOMIZATION INFORMATION ADVANCED Motion Controls’ products are available in many configurations. All models listed in the selection tables of the website are readily available, standard product offerings. ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick-turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for further information and details. Examples of Customized Products Optimized Footprint Tailored Project File Private Label Software Silkscreen Branding OEM Specified Connectors Optimized Base Plate No Outer Case Increased Current Limits Increased Current Resolution Increased Voltage Range Increased Temperature Range Conformal Coating Custom Control Interface Multi-Axis Configurations Integrated System I/O Reduced Profile Size and Weight Available Accessories ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system. Visit www.a-m-c.com to see which accessories will assist with your application design and implementation. Power Supplies Shunt Regulators Drive(s) Filter Cards To Motor Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.