Agv with robotic system
- 1. 6/12/2015FMS 1 By: Chirra Kumara Swamy Under: Prof. N.Selvaraj Roll No. 143503 PROFESSOR, NITW
- 2. Automated guided vehicle (AGV) is one type of versatile- mobile vehicle designed primarily to move the material from one place to another place. Various predominant sensors were also using in the AGV’s; for example, optical sensor, laser sensor, magnetic sensor and camera. Logistics management is that part of the supply chain that plans, implements, and controls the efficient, effective forward and reverse flow and storage of goods, services, and related information between the point of origin and the point of consumption in order to meet customer requirements. 6/12/2015FMS 2
- 4. The control device controls the vehicle movement and the speed of the vehicle up to a greater accuracy through some set of specially integrated equipment’s. PLC operated brushless DC motor Proximity sensor Photo sensor 6/12/2015FMS 4
- 6. 1. Detection of object nearby the vehicle 2. Detection of AGV at the stations Inductive proximity switches consist of a coil driven by an oscillator. The oscillator develops an electromagnetic field which will appear at the active face of the switch It is mounted on the lower bottom of the. 6/12/2015FMS 6 Proximity sensor
- 7. AGV‘s use tape for guide path this sensor decides the path of AGV which guides the vehicle in a confined Direction The magnetic tape method is used here where the vehicle follow the magnetic tape which is affixed or adhered on the floor. 6/12/2015FMS 7
- 8. Material transfer system consisted electronic components, PLC, motor controller, voltage regulator ect. Material transfer device is responsible for Robotic arm movements. PLC Digital computer that has an input and an output interface, controlled by a simulated program designed in a computer and it is used for automation for electromechanical process. 6/12/2015FMS 8
- 10. Motor controller: motion for arm is given by this motor, it gets commands from PLC. Potentiometer: is attached to thee shoulder or elbow joint. Robotic arm movements changes the resistance in potentiometer. 6/12/2015FMS 10
- 11. This mechanical grippers use the linear actuator which can be easily controlled by the DC motor The main aim to use the DC motor in gripper is to make all the functions controlled by electrically 6/12/2015FMS 11
- 12. 6/12/2015FMS 12 It uses the linear actuator as a driver. Large opening and closing. The parallel hand movements help effective gripping. Designed with high quality steel. Expensive design and manufacturing cost Smooth movement. Moderate weight. Using pneumatic or hydraulic system for gripper adds more complication and expenses.
- 13. 6/12/2015FMS 13 closed position of the Mechanical Gripper open position of the Mechanical Gripper
- 14. 6/12/2015FMS 14
- 15. The charging process is done by a constant interaction between the track supply and the onboard battery management system 6/12/2015FMS 15
- 16. The design is very modern and advanced, achieved through the help of PLC. Robotic arm on the top for easy transaction of material. This will give higher efficiency than the existing vehicles More flexible because each and every component in the vehicle is operated with the help of PLC Battery frees AGV 6/12/2015FMS 16
- 17. 6/12/2015FMS 17