Automated material handling

Dinbandhu Singh
Assistant Professor
Department of Mechanical Engineering
G. Pulla Reddy Engineering College(Autonomous), Kurnool, A.P.

 Vehicle Guidance
 Imbedded Guide Wires
 Paint Strips
 Self-guided Vehicles
 Vehicle Routing
 Frequency Select Method
 Path Switch Select Method
 Traffic Control
 On-board Vehicle Sensing
 Zone Control
 Benefits of AGV
 Applications of AGV
 Introduction
 Types of Material Handling
Equipment
 Material Transport Equipment
 Storage Systems
 Unitizing Equipment
 Identification and Tracking Systems
 Principles of Material Handling
 Automated Guided Vehicles (AGVs)
 Components of AGVS
 Types of AGVs
 Driverless Trains
 Automated Guided Pallet Trucks
 AGV Unit Load Carriers

 Material handling is defined as "the movement, storage, protection and
control of materials throughout the manufacturing and distribution
process including their consumption and disposal".
 The purpose of material handling in a factory is to move raw materials,
workpiece-in process, finished parts, tools, and supplies from one location
to another to facilitate the overall operations of manufacturing.
 The handling of materials must be performed safely, efficiently, at low cost,
in a timely manner, accurately (the right materials in the right quantities to
the right locations), and without damage to the materials. Material handling
is an important yet often overlooked issue in production.
 The material handling function is also concerned with material storage and
material control.

 A great variety of material handling equipment is available commercially. Material
handling equipment includes:
 Material Transport Equipment
 Storage systems
 Unitizing equipment, and
 Identification and tracking systems

 Material transport includes equipment that is used to move materials inside a
factory, warehouse. or other facility. This equipment can be divided into the
following five categories:
 Industrial Trucks: Industrial trucks divide into two types: non-powered and powered.
Non-powered trucks are platforms or containers with wheels that are pushed or pulled by
human workers to move materials. Powered industrial trucks are steered by human
workers. They provide mechanized movement of materials.
 Automated Guided Vehicles (AGVs): AGVs are battery-powered, automatically steered
vehicles that follow defined pathways in the floor. The pathways are unobtrusive. AGVs are
used to move unit loads between load and unload stations in the facility. Routing
variations are possible, meaning that different loads move between different stations. They
are usually interfaced with other systems to achieve the full benefits of integrated
automation.

 Monorails & 0ther Rail-Guided Vehicles: These are self-propelled vehicles that ride on
a fixed rail system that is either on the floor or suspended from the ceiling. The vehicles
operate independently and are usually driven by electric motors that pick up power from
an electrified rail. Like AGVs, routing variations are possible in rail-guided vehicle systems.
 Conveyors: Conveyors constitute a large family of material transport equipment that are
designed to move materials over fixed paths, generally in large quantities or volumes.
Examples include-roller, belt, and tow-line conveyors. Conveyors can be either powered or
non-powered. Powered conveyors are distinguished from other types of powered material
transport equipment in that the mechanical drive system is built into the fixed path. Non-
powered conveyors are activated either by human workers or by gravity.
 Cranes & Hoists: These are handling devices for lifting, lowering, and transporting
materials, often as very heavy loads. Hoists accomplish vertical lifting; both manually
operated and powered types are available. Cranes provide horizontal travel and generally
include one or more hoists.
In addition to the equipment types listed here, there are many kinds of transport equipment that
move materials outside the factory or warehouse, including highway tractor-trailer trucks, railway
trains, cargo aircraft, ships and barges.

 Although it is generally desirable to reduce the storage of materials in
manufacturing, it seems unavoidable that raw materials and workpart-in-process
will spend some time being stored, even if only temporarily. And finished products
are likely to spend some time in a warehouse or distribution center before being
delivered to the final customer. Accordingly, companies must give consideration to
the most appropriate methods for storing materials and products prior to, during,
and after manufacture. Storage methods and equipment can be classified as follows:
 Bulk storage: This consists of simply storing materials in an open floor area, generally in
pallet loads or other containers. It requires little or no storage equipment.
 Rack systems: Rack systems are structural frames designed to stack unit loads vertically,
thus increasing the vertical storage efficiency compared to bulk storage.

 Shelving and bins: Steel shelving comes in standard widths, depths, and heights to serve
a variety of storage requirements, Shelves can include bins, which are containers for loose
items.
 Drawer storage: This storage medium is more costly than shelves, but it is more
convenient. Finding items stored in shelves can be difficult if the shelf level is too high or
too low or too deep. Drawers compensate for this by pulling out to reveal their entire
contents. Drawer storage is generally used for tools, hardware, and other small items.
 Automated storage systems: Automated and semi-automated systems are available to
deposit and withdraw items into and from the storage compartments. There are two basic
types: (1) automated storage/retrieval systems, consisting of rack and shelf systems that are
accessed by an automated or mechanized crane, and (2) carousel systems that rotate
storage bins past a stationary load/unload station.

 The term unitizing equipment refers to (1) containers used to keep individual items
during handling and (2) equipment used to load and package the containers.
 Containers for holding individual items: Containers include pallets, boxes, baskets,
drums, buckets, and barrels. Although seemingly mundane, this type of equipment is
very important for moving materials efficiently as a unit load, rather than as individual
items. A given facility must often standardize on a specific type and size of the container if
it utilizes automatic transport and/or storage equipment to handle the loads.
 Loading and packing equipment: The second category of unitizing equipment, loading
and packaging equipment, includes Palletizer, designed to automatically load cartons
onto pallets and shrink-wrap plastic film around them for shipping. Other wrapping and
packaging machines are also included in this equipment category, as are Depalletizers,
designed to unload cartons from pallets.

 Material handling must include a means of keeping track of the materials being
moved or stored. This is normally done by appending some kind of label to the item,
carton, or unit load that uniquely distinguishes it.
 The most common label used today consists of bar codes that can be read quickly
and automatically by bar code readers. This is the same basic technology employed
by grocery stores and retail merchandisers.
 Other types of labels include magnetic stripes and radio frequency tags that are
broadly capable of encoding more data than bar codes.

 Over time certain principles have been found to be applicable in the analysis, design,
and operation of material handling systems. Implementing these principles will
result in safer operating conditions, lower costs, and better utilization and execution
of material handling systems. The 10 principles of material handling are listed and
explained as follows:
 Planning Principle: All material handling should be the result of a deliberate plan where
the needs, performance objectives, and functional specification of the proposed methods
are completely defined at the outset.
 Standardization Principle: Material handling methods, equipment, controls, and
software should be standardized within the limits of achieving overall performance
objectives and without sacrificing needed flexibility, modularity, and throughput.
 Work Principle: Material handling work should be minimized without sacrificing
productivity or the level of service required of the operation.

 Ergonomic Principle: Human capabilities and limitations must be recognized and respected
in the design of material handling tasks and equipment to ensure safe and effective operations.
 Unit Load Principle: Unit loads shall be appropriately sized and configured in a way which
achieves the material flow and inventory objectives at each stage in the supply chain.
 Space Utilization Principle: Effective and efficient use must be made of all available space.
 System Principle: Material movement and storage activities should be fully integrated to form
a coordinated, operational system that spans receiving, inspection, storage, production,
assembly, packaging, unitizing, order selection, shipping, transportation, and the handling of
returns.
 Automation Principle: Material handling operations should be mechanized and/or
automated where feasible to improve operational efficiency, increase responsiveness, improve
consistency and predictability. decrease operating costs, and eliminate repetitive or potentially
unsafe manual labor.

 Environmental Principle: Environmental impact and energy consumption should be
considered as criteria when designing or selecting alternative equipment and material handling
systems.
 Life Cycle Cost Principle: A thorough economic analysis should account for the entire life
cycle of all material handling equipment and resulting systems.
 The unit load principle stands as one of the most important and widely applied
principles in material handling. In material handling, a unit load is simply the mass
that is to be moved or otherwise handled at one time. The unit load may consist of
only one part, it may consist of a container loaded with multiple parts, or it may
consist of a pallet loaded with multiple containers of parts. In general, the unit load
should be designed to be as large as is practical for the material handling system that
will move or store it. subject to considerations of safety, convenience, and access to
the materials making up the unit load. This principle is widely applied in the truck,
rail, and ship industries.

 Automated guided vehicle systems (AGVs), usually known as driverless vehicles, are
turning out to be an important component of the automated manufacturing system.
 An automated guided vehicle system (AGVS) is a material handling system that uses
independently operated, self-propelled vehicles guided along defined pathways. The
vehicles are powered by on-board batteries that allow many hours of operation (8-16
hr. is typical) between recharging.
 The Automated Guided Vehicle belongs to a class of highly flexible, intelligent, and
versatile material-handling systems used to transfer materials from various loading
locations to various unloading locations throughout the facility.
 The capability related to collision avoidance is nicely inbuilt in AGVS. Therefore, the
vehicle comes to a dead stop before any damage is done to the personnel, materials,
or structures. They are becoming an integral component of flexible manufacturing
system installations.

 There are four main components of an automated guided vehicle system. They are
summarized as follows:
 The Vehicle: It is used to move the material within the system without a human operator.
 The Guide Path: It guides the vehicle to move along the path.
 The Control Unit: It monitors and directs system operations, including feedback on
moves, inventory, and vehicles.
 The Computer Interface: It is connected with other computers and systems such as
mainframe host computer, the Automated Storage and Retrieval System (AS/RS), and the
Flexible Manufacturing System.

 Automated
guided
vehicles can
be divided
into the
following
three
categories:
 Driverless
trains
 Pallet
trucks
 Unit load
carriers

 A driverless train consists of a towing vehicle (which is the AGV) that pulls one or more trailers
to form a train as in Figure. It was the first type of AGVS to be introduced and is still widely
used today.
 A common application is moving heavy payloads over large distances in warehouses or factories
with or without intermediate pickup and drop-off points along the route. For trains consisting
of five to ten trailers, this is an efficient transport system.

 These are used to move palletized loads along predetermined routes. In the typical application the vehicle is
backed into the loaded pallet by a human worker who steers the truck and uses its forks to elevate the load
slightly. Then the worker drives the pallet truck to the guide-path, programs its destination, and the vehicle
proceeds automatically to the destination for unloading.
 The capacity of an AGVS pallet truck ranges up to several thousand kilograms, and some trucks are capable
of handling two pallets rather than one. A more recent introduction related to the pallet truck is the fork lift
AGV. This vehicle can achieve significant vertical movement of its forks to reach loads on racks and shelves.

 AGV unit load carriers are used to move unit loads from one station to another. They are often
equipped for automatic loading and unloading of pallets or tote pans by means of powered
rollers, moving belts, mechanized lift platforms, or other devices built into the vehicle deck. A
typical unit load AGV is illustrated in Figure.
 Variations of unit load carriers include light load AGVs and assembly line AGVs. The light load
AGV is a relatively small vehicle with corresponding light load capacity (typically 250 kg or
less). An assembly line AGV is designed to carry a partially completed subassembly through a
sequence of assembly workstations to build the product.

 The guidance system is the method by which AGVS pathways are defined and
vehicles are controlled to follow the pathways.
 The primary objective of a guidance system is to keep the vehicle in the pre-
designated path.
 The main advantage of AGVS guidance is that the guide path can be changed easily
at low cost compared with the high cost of modifying fixed path equipment such as
conveyors, chains, and low lines. The selection will depend on need, application, and
environmental constraints. There are three widely used methods to set the path for
AVGS:
 Imbedded Guide Wires
 Paint Strips
 Self-guided Vehicles

 In the imbedded guide wire method, electrical wires are placed in a small channel cut into the
surface of the floor. The channel is typically 3-12 mm wide and 13-26 mm deep. After the guide
wire is installed, the channel is filled with cement to eliminate the discontinuity in the floor
surface. The guide wire is connected to a frequency generator, which emits a low-voltage, low-
current signal with a frequency in the range 1-15 kHz. This induces a magnetic field along the
pathway that can be followed by sensors on-board each vehicle. The operation of a typical
system is illustrated in the figure shown below.

 When paint strips are used to define the pathway, the vehicle uses an optical sensor
system capable of tracking the paint. The strips can be taped, sprayed, or painted on
the floor. One system uses a 1-in-wide paint strip containing fluorescent particles
that reflect an ultraviolet (UV) light source from the vehicle. An on-board sensor
detects the reflected light in the strip and controls the steering mechanism to follow
it.
 Paint strip guidance is useful in environments where electrical noise renders the
guide wire system unreliable or when the installation of guide wires in the floor
surface is not practical.
 One problem with this guidance method is that the paint strip deteriorates with
time. It must be kept clean and periodically repainted.

 Self-guided vehicles (SGVs) represent the latest AGVS guidance technology. Unlike
the previous two guidance methods, SGVs operate without continuously defined
pathways. Instead, they use a combination of dead reckoning and beacons located
throughout the plant, which can be identified by on-board sensors.
 Dead reckoning refers to the capability of a vehicle to follow a given route in the
absence of a defined pathway in the floor, whereas beacons means a fire or light set
up in a high or prominent position as a warning or signal.
 The advantage of self-guided vehicle technology over fixed pathways (guide wires
and paint strips) is its flexibility. The SGV pathways are defined in software. The
path network can be changed by inserting the required data into the navigation
computer. New docking points can be set. The pathway network can be expanded by
installing new beacons. These modifications can be created rapidly and without
major alterations to the plant facility.

 In a factory the path followed by AVGs may be complex. These paths may contain
multiple loops, branches, side tracks along with loading and unloading points.
 Routing refers to the ability of the vehicle to select one among the several potential
pathways to move to the destination point.
 Whenever AGV approaches at a junction of two paths, a decision has to be made by
the vehicle to decide the path to be followed. This particular point is called as a
decision point of the vehicle.
 Two important techniques are used to achieve this function:
 The frequency select method, and
 The path switch select method

 In the frequency select method, the guide wires leading into the two separate paths
at the switch have different frequencies. As the vehicle enters the switch, it reads an
identification code on the floor to determine its location.
 Depending on its programmed destination, the vehicle chooses the correct
guidepath by following only one of the frequencies.
 This method requires a separate frequency generator for each different frequency
used in the guidepath layout.

 The path switch select method operates with a single frequency throughout the
guidepath layout.
 To control the path of a vehicle at a switch, the power is turned off in all other
branches except the one that the vehicle is to travel on.
 To accomplish routing by the path switch select method, the guidepath layout is
divided into blocks that are electrically insulated from each other. The blocks can be
turned on and off either by the vehicles themselves or by a central control computer.

 The purpose of traffic control in an automated guided vehicle system is to minimize
interference between vehicles and to prevent collisions.
 Two methods of traffic control used in commercial AGV systems are:
 On-board vehicle sensing, and
 Zone control

 On-board vehicle sensing, also called forward sensing, involves the use of one or
more sensors on each vehicle to detect the presence of other vehicles and obstacles
ahead on the guide path. Sensor technologies include optical and ultrasonic devices.
 When the on-board sensor detects an obstacle in front of it, the vehicle stops. When
the obstacle is removed, the vehicle proceeds. If the sensor system is 100% effective,
collisions between vehicles are avoided.
 The effectiveness of forward sensing is limited by the capability of the sensor to
detect obstacles that are in front of it on the guide path.
 These systems are most effective on straight pathways. They are less effective at turns
and convergence points where forward vehicles may not be directly in front of the
sensor.

 In zone control, the AGVS layout is divided into separate zones, and the operating
rule is that no vehicle is permitted to enter a zone if that zone is already occupied by
another vehicle.
 The length of a zone is at least sufficient to hold one vehicle plus allowances for
safety and other considerations. Other considerations include number of vehicles in
the system, size and complexity of the layout, and the objective of minimizing the
number of separate zone controls.
 For these reasons, the zones are normally much longer than a vehicle length. By
controlling the forward movement of vehicles in the separate zones, collisions are
prevented, and traffic in the overall system is controlled.

 Some of the advantages of Automated Guided Vehicles are:
 Reduction in direct labour
 Utilization of less floor space during material handling
 Reduced product damage from material handling
 Better control of material flow and inventory
 Improvements in safety records

 Some of the applications areas of Automated Guided Vehicles include:
 Driverless train operations
 Assembly line operation
 Flexible manufacturing system
 Raw material handling
 Pallet handling
 Finished product handling
 Trailer loading

 CAD/CAM- Mikell P. Groover
 CAD/CAM- Chennakesava R. Alavala
 CAD/CAM-K. LALIT NARAYAN
 Computer Aided Manufacturing- G. Shanmuga Sundar
 CAD CAM CIM- P. Radhakrishnan,S. Subramanyan,V. Raju
 Automation, Productions systems, and computer Integrated
manufacturing – Mikell P. Groover
 American Society of Mechanical Engineers
 http://www.toolingu.com/

Automated material handling

More Related Content

What's hot (20)

Similar to Automated material handling (20)

Recently uploaded (20)

Automated material handling