Aluminium window
45 likes14,972 views
The document summarizes the key components used to construct an aluminum sliding window. It lists the materials needed including base channels, E-sections, angles, bearings, rubber strips, and glass. It then describes how these pieces fit together, with the bearing fitting into the channel section to allow the glass pane to slide horizontally. L-angles are used to join the bottom, sides, and top frame pieces together. Finally, holes are drilled to screw the completed window frame into the wall opening.
Aluminium window
- 1. METAL WINDOW CASE STUDY – ALUMINIUM SLIDING WINDOW ( 4x3 ft )
- 2. DETAILS Following things are used in making the aluminium sliding window : 1. Base ( channel section )– on which the window pane slides 2. E – sections , C- sections – market value : 200rs/kg and 12- 15 ft long 3. Angles 4. Bearings 5. Rubber channel sections – market value – 100rs/kg 6. Glass 7. Screws
- 4. BASE or BOTTOM where the glass pane frame slides
- 5. E- sections Used in making the frame of the window
- 6. L - angles Used to join the bottom to the sides ( e- sections ) when both are cut at 45 degrees
- 7. Plan, elevation and details of window frame
- 8. Parts making up the sash or sliding window 1. The bearing is fit in the channel section with the help of screws on one side 2. On the other side of the section fits the glass pane with the help of the rubber section
- 10. The image shows how the bearing slides on the bottom section
- 11. The window frame is fixed in the wall by making holes on both the surfaces and then screwing it
- 12. L- angle is used to join the head and bottom to the posts
- 14. Prepared by – Neha Rampuria Kakshak Shah