AMO Absolute Encoder Catalog

AMO GmbH
Absolute encoder based on the AMOSIN®
–
Inductive Measuring Principle
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:

2
This document was created very carefully. If there are any
technical changes, they will promptly updated in the docu-
ments on our website www.amo-gmbh.com
With the publication of this brochure all previous editions
become invalid.
The currently valid brochure is available on our website
www.amo-gmbh.com
SN: ABSOLUTE-P 20140331
ELECTROMATE
www.electromate.com
Sold & Serviced By:

3
Table of contents
General informations
General information............................................................................................... 4
Absolute angle measuring systems

Standard measuring flanges for outside scanning................................................. 6

Customer specific measuring flanges for outside scanning................................... 8

Measuring rings for outside scanning.................................................................... 10

Measuring rings for inside scanning...................................................................... 12

Scanning head for absolute angle measuring systems......................................... 14
Non guided Absolute length measuring systems

Scales for non-guided measuring systems, mounted with adhesive tape............. 18

Scales for non-guided measuring systems with steel carrier................................. 19

Scanning heads for non-guided measuring systems............................................. 22
Guided Absolute length measuring systems

Measuring rail for guided systems......................................................................... 24

Scanning head for guided systems........................................................................ 27
General technical data

Maximum speeds................................................................................................... 31

Cable..................................................................................................................... 32

Plug and connection assignments......................................................................... 33
ELECTROMATE
www.electromate.com
Sold & Serviced By:

4
Absolute Messsysteme
Absolute measuring systems
Allgemeine Informationen
General informations
General
AMO announces new absolute linear and angular encoders with
IP 67 rating.
We have recently introduced ABSYS, a broad range of absolute
measuring system products covered by several AMO patents,
based on our proven and successful AMOSIN®
pure inductive
measuring principle.
Our linear and rotary scales are produced incorporating two highly
accurate grating tracks - one incremental and the other a coded
absolute pattern, using a precision etched photo-lithographic
process. The encoder head incorporates a micro coil array sensor
along with analog and digital evaluation electronics.
For both the linear and rotary systems, the absolute position value
is acquired in real time. Several types of serial interfaces are
available, including SSI, BiSS/C, and CNC control protocols. As
an option, the system electronics can also deliver 1 Vpp SINE /
COSINE signals at 40µm pitch.
The basic pitch period of the incremental graduation is 1000μm.
The new ABSYS absolute encoders include all of the unique
inductive encoder features that our incremental encoders have for
harsh environments, such as very wide operating temperature en-
velope, ability to operate in high shock, vibration, and electroma-
gnetic environments, but yet offer high accuracy, high resolution,
and high speed. Additional data for our encoders can be found in
the AMOSIN®
brochures (see www.amo-gmbh.com).
Linear measuring lengths up to 32 meters, and standard ring scale size from 80 mm up to 652 mm diameter are available. Measuring rings with
other diameters up to 10m on request.
Abtastkopf
Measuring head
Inkrementale Teilung
Incremental grating
Absolut codierte Teilung
Absolut coded grating
Messflansch
Measuring flange
Absolut codierte Teilung
Absolut coded grating
Inkrementale Teilung
Incremental grating
Abtastkopf
Measuring head
Absolutmaßstab
Absolut scale
Absolut Angle Measuring System
Absolut Linear Measuring System
ELECTROMATE
www.electromate.com
Sold & Serviced By:

5
Outside or Inside Scanning■■
Resolution up to 25 bit■■
Available interfaces:■■
SSI, BiSS/C, Fanuc
Diameters up to 10 m■■
Protection class IP 67■■
ELECTROMATE
www.electromate.com
Sold & Serviced By:

6
Absolute Winkelmesssysteme
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Standard measuring flanges and rings for outside scanning
Measuring flanges WMFA-1010 with 1000µm grating pitch offered as
standard sizes as shown in the table below.
Customer specific designs for the measuring flange can be supplied
by AMO or the measuring flange will be supplied by the customer for
mounting the measuring ring at AMO (see page 8 for details).
The measurement scale of the absolute angle measuring systems with
external scan can be realized in the following models:
standard measuring flange■■
customer specific flange■■
measuring rings■■
Grating pitches / revolution (N)
Inner diameter ØI (see drawing)
0 .......... small
1 .......... large
Linearity error
0 ... ± 10 µm arc length
WMFA-1010. - -
Technical data
Ordering code: WMFA-1010
WMFA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024
Grating pitch [arc length]:
1000 µm
Grating accuracy [arc length]:
± 10 µm, ± 5 µm oder (or) ± 3 µm
Mechanical execution:
Stainless steel measuring flange in 2 versions:
massive: WMFA-1010.x-xxxx-0
thin: WMFA-1010.x-xxxx-1
Outer diameter ØA [mm]:
81,95 115,12 163,54 229,78 287,08 326,55
Incremetal grating pitches / rev:
256 360 512 720 900 1024
Absolute resolution / rev [increments] 1µm:
218
360 x 210
219
720 x 210
900 x 210
220
Absolute resolution / rev [increments] 0,25µm:
220
360 x 212
221
720 x 212
900 x 212
222
ELECTROMATE
www.electromate.com
Sold & Serviced By:

7
Dimensions standard measuring flanges
Type
WMFA-1010
Ø A
[mm]
Ø I
[mm]
Ø B
[mm]
β
Scale accuracy
WMFA-1010.0 WMFA-1010.1 WMFA-1010.2
0256-1 81,95 60 +0
-0,01 70 6 x 60° ±50” ±25” ±15“
0360-0 115,12 60 +0
-0,01 75
6 x 60° ±36” ±18” ±10“
0360-1 115,12 95 +0
-0,01 105
0512-0 163,54 105 +0
-0,01 120
6 x 60° ±24” ±12” ±7,5“
0512-1 1)
163,54 143 +0
-0,01 153
0720-0 229,78 180 +0
-0,01 195
6 x 60° ±18” ±9” ±5,4“
0720-1 1)
229,78 209 +0
-0,01 219
0900-0 287,08 180 +0
-0,01 195
12 x 30° ±14” ±7” ±4,3“
0900-1 1)
287,08 266 +0
-0,01 276
1024-0 326,55 220 +0
-0,01 235
12 x 30° ±12” ±6” ±3,8“
1024-1 1)
326,55 296 +0
-0,01 311
1)
Only for press-fitt assembly on the customers shaft (recommended shaft tolerance +0,02 / +0,01)
Dimensions WMFA-1010
ß
M
6
0,1
X
ØB
0,005
15 ±0,05
5,2
0,1
0,5x45°
0,5x45°
6,5 6,5
2 0
+0,5
DETAIL X
M 2:1
ØA
0,005A
0,005
A
ØI
0
-0,01
+0,1
0
ELECTROMATE
www.electromate.com
Sold & Serviced By:

8
Customer specific designs for the measuring flange can be supplied by
AMO (Type WMFA) or the measuring flange will be supplied by the cus-
tomer for mounting the measuring ring at AMO (Type WMBA). In this
case the diameter for mounting the measuring ring can be calculated
as shown in the table on the next page.
Special sizes with any number of pitches per revolution on request
Customer specific measuring flanges for outside scanning
The production drawing for the carrier flange can be released by
AMO.
For applications with large diameters or significant variations in tem-
perature during operation the system must be designed accordingly.
WMFA-1010 / WMBA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024
1000 µm
± 10 µm, ± 5 µm oder (or) ± 3 µm
Customer specific, recommended material 1.4104 (Aisi 430F) or 1.7225 (Aisi 4140)
81,95 115,12 163,54 229,78 287,08 326,55
256 360 512 720 900 1024
218
360 x 210
219
720 x 210
900 x 210
220
220
360 x 212
221
720 x 212
900 x 212
222
Technical data
ELECTROMATE
www.electromate.com
Sold & Serviced By:

9
Mechanical design for WMFA-1010 / WMBA-1010
WMFA-1010 / WMBA-1010
0,5-1 15°
>15
0,8
0,5
ØS=ØF+0,65±0,05
ØSLänge>7mm
FreiraumfürAbtastkopf
keepfreefor>7mm
Measuringheadwidth
Gratfrei
Burr free
0,005*
0,005*A
0,01 A
A
l
ØF
3,2
Recommended material: 1.4104 (Aisi 430F) or 1.7225 (Aisi 4140)
Please contact AMO if using other soft magnetic material.
Grating pitch [arc length]: 1000 µm
N ØF [mm]
256 81,25 ±0,01
360 114,42 ±0,01
512 162,84 ±0,02
720 229,08 ±0,02
900 286,38 ±0,02
1024 325,85 ±0,02
N: Integer number of grating pitches per revolution
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
Ordering code: customer specific designs for WMFA-1010 / WMBA-1010
Customer specific design
xx ......... number defined by AMO
Linearity error
WMFA-1010. S- -
WMBA-1010. S- -
ELECTROMATE
www.electromate.com
Sold & Serviced By:

10
Measuring rings for outside scanning
Thin, stainless steel measuring ring, consisting of a steel carrier ring,
a graduation ring and a protection ring. Easily pressfitted mounting to
the corresponding flange by the customer. (see mounting instruction at
www.amo-gmbh.com)
For special applications the measuring ring (circular segment also pos-
sible) can be mounted on a flange at the factory.
WMRA-1010
14
0,65
F
A
Innendurchmesser
Inner diameter
Außendurchmesser
Outer diameter
WMRA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024 1440 1800 2048
1000 µm
± 10 µm, ± 5 µm oder (or) ± 3 µm
Stainless steel measuring ring
Flange material:
No special material required
81,95 115,12 163,54 229,78 287,08 326,55 458,99 573,61 652,58
256 360 512 720 900 1024 1440 1800 2048
218 360 x
210 219 720 x
210
900 x
210 220 1440 x
210
1800 x
210 221
220 360 x
212 221 720 x
212
900 x
212 222 1440 x
212
1800 x
212 223
Technical data
ELECTROMATE
www.electromate.com
Sold & Serviced By:

11
Mechanical design for WMRA-1010
WMRA-1010
0,5-1
15°
>15
0,8
0,5
ØS=ØF+1,15±0,05
ØSLänge>7mm
keepfreefor>7mm
Measuringheadwidth
Gratfrei
Burr free
0,005*
0,005*A
0,01 A
A
l
ØF
3,2
N ØF [mm]
256 80,65 ±0,01
360 113,82 ±0,01
512 162,24 ±0,02
720 228,48 ±0,02
900 285,78 ±0,02
1024 325,25 ±0,02
1440 457,69 ±0,03
1800 572,31 ±0,06
2048 651,28 ±0,07
Linearity error
WMRA-1010. -
Ordering code: WMRA-1010
AMO.
perature during operation and when the carrier flanges are not made
of steel, the system must be designed accordingly.
ELECTROMATE
www.electromate.com
Sold & Serviced By:

12
Messringe - Innenabtastung
Measuring rings - inside scanning
Measuring rings for inside scanning
Thin, stainless steel measuring ring WMRA-1110 consisting of a steel
carrier ring and a graduation ring.
The ring can be mounted over a „snap-effect“ by the customer into a
corresponding groove or against a stop collar.
WMRA-1110
B
14
0,60
F
Außendurchmesser
Outer diameter
Innendurchmesser
Inner diameter
WMRA-1110
Standard sizes N
1024 1440 1800 2048
1000 µm
± 10 µm, ± 5 µm oder (or) ± 3 µm
Stainless steel measuring ring
Flange material:
No special material required
1024 1440 1800 2048
220
1440 x 210
1800 x 210
221
222
1440 x 212
1800 x 212
223
Technical data
ELECTROMATE
www.electromate.com
Sold & Serviced By:

13
Messringe - Innenabtastung
Measuring rings - inside scanning
Mechanical design for WMRA-1110
WMRA-1110
14,01 0
+0,1
0,5
0,8
0,8
ØB
ØS=ØB-1,15±0,05
Gratfrei
Burr free
Gratfrei
Burr free
3,2
0,02 A
0,005* A
0,02 A
A
ØSLänge>28mm
keepfreefor>28mm
Measuringheadwidth
N ØB [mm]
1024 326,62 ±0,02
1440 459,01 ±0,03
1800 573,56 ±0,06
2048 652,47 ±0,07
Linearity error
WMRA-1110. -
Ordering code: WMRA-1110
AMO.
perature during operation and when the carrier flanges are not made
of steel, the system must be designed accordingly.
ELECTROMATE
www.electromate.com
Sold & Serviced By:

14
Abtastkopf
Scanning head
Technical data
WMKA-2110x
inside scanning
WMKA-2010x
outside scanning
Operating temperature:
-10°C … 85°C
Storage temperature:
-20°C … 85°C
Protection class:
IP67
Vibration:
< 200 m/s² für (for) 55 – 2000 Hz
Shock:
< 2000 m/s² für (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Incremental grating pitch:
1000 µm
Max. input frequency: 39 kHz für alle absoluten Schnittstellen (2,4kHz bei 0,25µm) /for all absolute interfaces
60 kHz für 1Vss Ausgang / for 1Vpp output
System resolution: Absolutes interface:
Absolute interface:
bis zu 25 bit pro Umdrehung
up to 25 bit per revolution
Analogausgang 1Vss:
Analog output 1Vpp:
bis zu 31,25 µm
down to 31,25 µm
Absolute interfaces: SSI (200kHz ... 1MHz and Sine/Cosine)
BiSS/C (max. clock frequency: 2,5 MHz)
FANUC, DRIVE-CLiQ
Mitsubishi in preparation
Other interfaces on request
Suitable measuring scale: WMRA-1110
see page 12
WMFA-1010
WMBA-1010
WMRA-1010
see page 6
Scanning head for absolute angle measuring systems
The scanning heads WMKA-2010x with integrated electronics can
be combined with measuring flanges WMFA-1010, WMBA-1010 or
measuring rings WMRA-1010 (see page 6).
The systems are insensitive against environmental pollution like (like
oil, coolant, dust ...).
ELECTROMATE
www.electromate.com
Sold & Serviced By:

15
Abtastkopf
Scanning head
Possible resolutions for 1Vpp output (only for SSI-interface)
Output frequency fa (input frequency for
subsequent electronics) is limited to 300
kHz for 1Vpp-systems.
Output signal
Sine 1Vpp
Type
WMKA
Signal periods
Max. input
frequency(1)
f[khz]
Power
consumption
[mA] at 5V
Teilungsfaktor
Dividing factor
Perioden
[Bogenlänge]
Periods
[arc length]
[µm]
2x100.x00(1)
1 1000
9 (10 bit)
2,4 (12 bit)
max. 250
2x100.x10 1 1000
9 (10 bit)
2,4 (12 bit)
max. 250
2x100.x11 8 125
2x100.x12 10 100
2x100.x13 25 40
2x100.x14 32 31,25
2x100.x15 4 250
2x100.x16 16 62,5
2x100.x30 1 1000 60 (10 bit) max. 250
I
6xM6
A
25= = ~6
50
4
2x
4,5
5,2
B
6x60°
A/2+k
Luftspalt 0,15±0,1
mit Folie einstellen
Air gap0,15±0,1
set with spacer film
26
15
22,1
14
5 ±0,5
Messflansch
Measuring flange
A
0,1 A
A
A
14
26
0,65
6 ±0,5
A
Messring
Measuring ring
Messkopf
Measuring head
0,1 A
A
Zählrichtung +
Count direction +
Assembly drawing WMKA-2010x
Assembly drawing WMKA-2110x
(1)
Encoder for safety related applications
N
Pitches / rev
ØA/2 + k
[mm]
256 56,74
360 73,29
512 97,82
720 131,64
900 160,39
1024 180,33
1440 246,74
1800 304,25
2048 343,84
N
Pitches / rev
k [mm]
1024 1,93
1440 1,37
1800 1,09
2048 0,96
25
50
==
4
2x
4,5
5,2
18,1+k
26
14
0,15±0,1
6 ±0,5
Absolutspur
Absolut track
WMRA-1100
Zählrichtung
Count direction+
LuftspaltmitFolieeinstellen
Airgapsetwithspacerfilm
ELECTROMATE
www.electromate.com
Sold & Serviced By:

16
Abtastkopf
Scanning head
Ordering code: WMKA-2010x/2110x with SSI - Interface and DRIVE CLiQ
Ordering code: WMKA-2010x/2110x for interfaces other than SSI and DRIVE CLiQ
Cable length in meter
preferred cable length in steps of 0,5m
Interface
Type
1 ... BISS/C
3 ... FANUC
4(1)
... Mitsubishi
(1)
in preparation
Absolute - Interface
Resolution in bit per grating pitch
1 .......10 bit
2 .......12 bit
Max. input frequency
1 ... 9 kHz (10 bit) / 2,4kHz (12 bit)
2 ... 39 kHz (10 bit)
Connector type
0 ...... none
2 ...... 20 pin FANUC connector
5 ...... 15 pin Sub-D connector
7 ...... 17 pin CONNEI coupling (male)
Design
0 ...Outside scanning
1 ...Inside scanning
WMKA-2 10 N-. - , -
,
,
Resolution in bit per grating pitch
1 .......10 bit
2 .......12 bit
Analog dividing factor 1Vpp
0 ......1 (1000 µm)
1 ......8 (125 µm)
2 ... 10 (100 µm)
3 ... 25 (40 µm)
4 ... 32 (31,25 µm)
5 ..... 4 (250 µm)
6 ... 16 (62,5 µm)
0(1,3)
... 9 kHz (10 bit) / 2,4 kHz (12 bit)
1 ... 9 kHz (10 bit) / 2,4 kHz (12 bit)
3(2,3)
... 60 kHz (10 bit)
(1)
(2)
60 kHz for 1Vpp output / 39 kHz for SSI interface
(3)
only with analog dividing factor 1 possible
Connector type
0 ...... none
2 ...... 20 pin FANUC connector
5 ...... 15 pin Sub-D connector
7 ...... 17 pin CONNEI coupling (male)
8 ...... 8 pin M12 connector (just for DriveCLiQ)
Design
0 ... Outside scanning
1 ... Inside scanning
WMKA-2 100 -. - , -
WMKA-2 102 -. - -1 N 0,5 08 DRIVE CLiQ
SSI
ELECTROMATE
www.electromate.com
Sold & Serviced By:

17
Absolute length measuring systems
Resolution up to 25 bit■■
Available interfaces:■■
SSI, BiSS/C, Fanuc
Measuring lengths up to 32m■■
Protection class IP 67■■
ELECTROMATE
www.electromate.com
Sold & Serviced By:

18
Offene absolute Längenmesssysteme
Open absolute length measuring systems
Maßbänder
Scales
LMBA-1110/2110
Scale for non-guided measuring systems, mounted with adhesive tape
Technical data
Configuration
LMBA-1110 LMBA-2110
1000 µm
Accuracy after linear compensation:
± 10 µm/m, ± 5 µm/m oder (or) ± 3 µm/m
Coefficient of expansion:
~ 11 ppm/K
Overall length GL:
≤ 9200 mm > 9200 mm, bis (up to) 32000 mm
Meauring length ML:
ML = Gl - 50 mm
Stainless steel measuring tape with adhesive layer for mounting
At the open, non-guided systems a double sided adhesive foil is ap-
plied on the measuring scale for direct sticking on the machine bed. At
all of these versions the scanning still takes place without contact and
is therefore not subject to wear.
There are 2 different types of scales. Scale type LMBA-1110 for scale
length up to 9200 mm and scale type LMBA-2110 for scales with
more than 9200mm length.
Abdeckband
Cover tape
Maßband
Measuring tape
Trägerband
Carrier tape
Doppelseitiges Klebeband
Adhesive tape
Ordering code
Overall length in mmLinearity error
1 ... ± 10 µm/m
2 ... ± 5 µm/m
3 ... ± 3 µm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
LMBA- 110. -
ELECTROMATE
www.electromate.com
Sold & Serviced By:

19
Maßbänder
Scales
Mounting on the machine without any adhesive (ideal for■■
harsh environments, replacement or repairable mounting is
possible)
Stainless steel scale carrier■■
Measuring lengths up to 32 m■■
Standard one meter carrier length, can be butted together for■■
ease of installation, optional single carriers up to three meters
are available
Main features of the LMBA - 1410/2410 carrier
LMBA-1410/2410
Scale on stainless steel carrier, for non-guided measuring systems
The scale type LMBA-1410/2410 is designed for harsh applications
where adhesive backed scale tape is not appropriate. A slim stainless
steel carrier is attached to the machine with screws, with an interlocking
“snap cover” securing the scale tape in position.
There are 2 different types of scales. Scale type LMBA-1410 for scale
length up to 9200 mm and scale type LMBA-2410 for scales with
more than 9200mm length.
"Schnapp" Abdeckung
"Snap" cover
Maßband
Scale
Maßbandträger
Scale carrier
Maßbandklemme
Scale fixing bracket
Trägerband
Carrier tape
Configuration
Technical data
LMBA-1410 LMBA-2410
1000 µm
± 10 µm/m, ± 5 µm/m oder (or) ± 3 µm/m
~ 11 ppm/K
Overall length:
≤ 9200 mm 9200 mm bis (up to) 32000 mm
Mechanical execution: Stainless steel measuring tape mounted on stainless steel carrier
Single carrier up to 3 m, lengths up to 32 m with multiple carriers
ELECTROMATE
www.electromate.com
Sold & Serviced By:

20
Maßbänder
Scales
LMBA - 1410/2410
Multiple section carrier, type M2
50 -0,5
0
100
9x100 100
50 -0,5
0
50 -0,5
0
50 -0,5
0
9x100 100
A
A
Trägerprofil Stoßstelle
Carrier joint point
Maßbandträger
Scale carrier
Maßband
Scale
GL
KLML10 10
Abtastkopf
Scanning head
"Schnapp" Abdeckung
"Snap" cover
Maßbandklemme
Zählrichtung
Count direction
+
1000
50 100 100,50 (k-1) x 100 50
RL1000
GL
9 x 100
7,5
14
22
4,5
18
3
6,9
5,1
0,5x45°
A-A (2 : 1)
Flachkopfschraube
Flat head screw
M4x6 DIN 7984
Multiple carriers in 1000 mm modules■■
Overall length in steps of 200 mm■■
GL = (n x 1000) + RL [mm]
i.e.: 1200 mm, 1400 mm, 1600mm, ...
Scale loose mounted on the carrier and fixed with the cover■■
tape
Any measuring lengths up to 32 m■■
Can be combined with scanning head LMKA-1110x for overall■■
length ≤ 9200 mm
or scanning head LMKA-2110x for overall length >9200 mm
GL = (n x 1000) + RL [mm] n = 1, 2, 3, ... GL ... overall length
RL = (k x 100) [mm] k = 2, 4, 6 ,8 RL ... remaining length
ML = GL - 70 mm ML ... measuring length
ELECTROMATE
www.electromate.com
Sold & Serviced By:

21
Maßbänder
Scales
LMBA - 1410
Single section carrier, type E2
GL = (m +1) x 100 [mm] m = 1, 2, 3, ... , 29 GL ... Gesamtlänge / overall length
ML = GL - 70 mm ML ... Messlänge / measuring length
50 -0,5
0
mx100
50 -0,5
0
100
A
A
Maßbandträger
Scale carrier
Maßband
Scale
GL
10 10KLML
Maßbandklemme
Abtastkopf
Scanning head"Schnapp"- Abdeckung
"Snap"- cover
14
7,5
22
4,5
18 ±0,05
05x45°
5,1
6,9
A-A (2 : 1)
Flachkopfschraube
Flat head screw
4x6 DIN 7984
Zählrichtung
Count direction+
Single carrier up to 3000 mm in length■■
Overall length in steps of 100 mm■■
GL = (m + 1) x 100 [mm]
i.e.: 200 mm, 300 mm, ... , 3000 mm
Scale loose mounted on the carrier and fixed with the cover■■
tape
Can be combined with scanning head LMKA-1110x■■
Ordering code
Overall length in mm
Linearity error
1 ... ± 10 µm/m
2 ... ± 5 µm/m
3 ... ± 3 µm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Carrier type
E2 ... Single section carrier
M2 ... Multiple section carrier
LMBA- 410. - -
ELECTROMATE
www.electromate.com
Sold & Serviced By:

22
Abtastkopf
Scanning head
Technical data
LMKA-1110x LMKA-2110x
-10°C … 85°C
-20°C … 85°C
Protection class:
IP67
Vibration:
< 200 m/s² für (for) 55 – 2000 Hz
Shock:
< 2000 m/s² für (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
1000 µm
Max. scale length:
≤ 9200 mm > 9200 mm
Max. speed:
10 m/s for 1µm 2,5 m/s for 0,25µm
System resolution:
Absolute interface:
1 µm / 0,25 µm
Analog output 1Vpp: 1000 µm or 40 µm
FANUC, DRIVE-CLiQ
Mitsubishi & Yaskawa in preparation)
Suitable measuring scale: LMBA-1110
LMBA-1410
see page 18
LMBA-2110
LMBA-2410
see page 18
Bestellcode siehe Seite 29/30
Order codes see on page 29/30
LMKA-1110x/2110x
Scanning head for non-guided absolute length measuring systems
The open, non-guided scanning heads with integrated electronics can
be combined with measuring scale types LMBA-1110/2110 or LMBA-
1410/2410 (see page 18).
Scanning head LMKA-1110x can be used only with scale type LMBA-
1110 or LMBA-1410, scanning head LMKA-2110x can be used only
with scale type LMBA-2110 or LMBA-2410.
The systems are insensitive against environmental pollution like (like
oil, coolant, dust ...).
ELECTROMATE
www.electromate.com
Sold & Serviced By:

23
Abtastkopf
Scanning head
Output signal
Sine 1Vpp
Type
LMKA
Signal periods Maximum
speed
[m/s]
Power
consumption
[mA] at 5V
Dividing factor
Periods
[arc length]
[µm]
x1100.100(1)
1 1000 10 max. 250
x1100.110 1 1000
10 max. 250
x1100.113 25 40
x1100.200(1)
1 1000 2,5 max. 250
x1100.210 1 1000
2,5 max. 250
x1100.213 25 40
~6
5,2
25= =
50
2 x 4,5
0,8
19,1
23,1
Messkopf
Measuring head
0,10,1
14
GL
6±0,5
Maßband
Scale
Absolutspurseite
Absolut track side
0,10,1
0,1/1000
0,150,1
26
22,1
0,1
A
LuftspaltmitFolieeingestellt
+
Zählrichtung
Count direction
0,1
Scale type LMBA-1110/2110
Assembly drawings LMKA-1110x/2110x
(1)
50
nx100
5,2
25 ==
18,254
2x
4,5
Zylinderschrauben M4x6
5,1
Maßstab LMBA-400
Scale LMBA-400
0,10,1 0,05/1000
18
==
A
Absolutspurseite
Absolut track side
A
0,10,1
0,1/1000
26
0,15±0,1
4 ±0,5
22,1
27,4
0,10,1
+ Zählrichtung
Count direction
LuftspaltmitFolieeingestellt
DIN 7984
Scale type LMBA-1410/2410
ELECTROMATE
www.electromate.com
Sold & Serviced By:

24
Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
Maßbänder
Scales
LMFA-1310/2310
Measuring rail for guidedAMOSIN®
measuring systems
Technical data
Configuration
LMFA-1310 LMFA-2310
Grating pitch:
1000 µm
± 10 µm/m, ± 5 µm/m or ± 3 µm/m
~ 11 ppm/K
Overall length:
≤ 9200 mm > 9200mm (bis zu / up to 32 000 mm)
Standard guide rail with integrated measuring scale
At the guided measuring systems the scale is integrated in a guiderail.
The measuring rail LMFA-1310/2310 is available in single or multiple
sections.
There are 2 different types of scales. Scale type LMFA-1310 for scale
length up to 9200 mm and scale type LMFA-2310 for scales with more
than 9200mm length.
Montage Bohrungen
für die Messschiene
Mounting hole for
the measuring rail
Maßband mit
Trägerband
Measuring scale
with carrier tape
"Schnapp" Abdeckung
"Snap" Cover
Maßbandklemme
(an beiden Enden)
(on both ends)
Messschiene
Measuring rail
ELECTROMATE
www.electromate.com
Sold & Serviced By:

25
Maßbänder
Scales
60
mx60
60
30 30
GL-Gesamtlänge /
0,4
9,4
6
13,2±0,5
20
20,55
Achtung!
Am Schienenende mit dem
Spannelement muß
ausreichend Platz für die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
Equipment design
considers here free
space for slider
mounting.
Overall length
+0
-1,0
+0
-1,0
LMFA - 1310
Single section measuring rail
GL = ((m + 1) x 60) [mm] m = 2, 3, 4, ... , 65 GL ... overall length
ML = GL - 100 [mm] ML ... measuring length
Max. total length: 3960 mm
Max. measuring length: 3860 mm
Single section measuring rail for measuring lengths up to■■
3860 mm
Measuring length in steps of 60 mm■■
ML = (m x 60) - 40 [mm]; m ≥ 2
i.e.: 80 mm, 140 mm, ... , 3860 mm
Can be combined with scanning heads LMKA-1310x■■
ELECTROMATE
www.electromate.com
Sold & Serviced By:

26
Maßbänder
Scales
30 mx60 30 30 64x60=3840 30
RL-Schinenreststück / nx3900
GL-Gesamtlänge /
+0
-1,0
+0
-1,0
0,4
9,4
6
13,2±0,5
20
20,55
Achtung!
Am Schienenende mit dem
Spannelement muß
ausreichend Platz für die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
Equipment design
considers here free
space for slider
mounting.
Overall length
Rest length rail
LMFA - 1310/2310
Multiple section measuring rail
GL = (n x 3900) + RL [mm] n = 1, 2, 3, ... GL ... overall length
RL = ((m + 1) x 60) [mm] m = 1, 2, 3, ... 64 RL ... Remaining length
ML = GL - 100 [mm] ML ... measuring length
Multiple section measuring rail for measuring lengths greater■■
than 3860 mm
Measuring length in steps of 60 mm■■
ML = (n x 3900) + (m x 60) -40 [mm]
Can be combined with scanning heads LMK-1310x/2310x■■
Ordering code
Measuring length in mm
Linearity error
1 ... ± 10 µm/m
2 ... ± 5 µm/m
3 ... ± 3 µm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Coating
0 ... ohne / without
1 ... mit Cr / with Cr
LMFA- 310. -
ELECTROMATE
www.electromate.com
Sold & Serviced By:

27
Abtastkopf
Scanning head
Technical data
LMKA-1310x LMKA-2310x
0°C … 80°C
-20°C … 85°C
Protection class:
IP67
Vibration:
< 200 m/s² für (for) 55 – 2000 Hz
Shock:
< 2000 m/s² für (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
1000 µm
Max. scale length:
≤ 9200 mm > 9200 mm
Max. speed:
5 m/s für 1µm; 2,5 m/s für 0,25µm, limited by the mechanics
System resolution:
Absolute interface:
1 µm / 0,25µm
Analog output 1Vpp:
1000 µm or 40 µm
FANUC, DRIVE-CLiQ
Mitsubishi & Yaskawa in preparation
Suitable measuring scale: LMFA-1310
see page 25
LMFA-2310
see page 25
LMKA-1310x/2310x
Scanning head for guided absolute length measuring systems
The guided scanning heads LMKA-1310x/2310x with integrated eva-
luation electronics can be combined with the measuring rails LMFA-
1310/2310 (see page 25).
Scanning head LMKA-1310x can be used only with rail type LMFA-
1310 and scanning head LMKA-2310x can be used only with rail type
LMFA-2310.
The systems are insensitive against environmental pollution (i.e. oil,
coolant, ...). Because of the option to mount the scanning head using
the mounting spring high mounting tolerances, especially for longer
measuring length, can be realized.
ELECTROMATE
www.electromate.com
Sold & Serviced By:

28
Abtastkopf
Scanning head
Output signal
Sine 1Vpp
Type
LMKA
Signal periods Maximum
speed
[m/s]
Power
consumption
[mA] at 5V
Dividing factor
Periods
[arc length]
[µm]
x3100.100(1)
1 1000 5 max. 250
x3100.110 1 1000
5 max. 250
x3100.113 25 40
x3100.200(1)
1 1000 2,5 max. 250
x3100.210 1 1000
2,5 max. 250
x3100.213 25 40
24
2
54,75
40,75
49,75
27,7
20
5,2
2x
4,4
75
20 ==
2
2x<M4/6 tief
34,75
Federelement
Mounting spring
2xM4/6 deep
14
25,8
44
Maßbandklemme
Absolut Spur
Absolut track
Assembly drawings LMKA-1310x/2310x
(1)
ELECTROMATE
www.electromate.com
Sold & Serviced By:

29
Abtastkopf
Scanning head
Kabellänge in Meter
Bevorzugte Kabellänge in 0,5m Schritten
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Auflösung in bit/Teilungsperiode (1)
Resolution in bit per grating pitch (1)
1 .......1µm
2 .......0,25µm
4 .......1µm (2)
5........0,25 µm (2)
(1)
SSI Beschreibung auf Homepage www.amo-gmbh.com
SSI Description on our website www.amo-gmbh.com
(2)
für neue Projekte, siehe SSI Beschreibung
for new Projects, see SSI Description
Steckertyp
Connector type
0 ...... ohne / none
2 ...... 20 pol FANUC Stecker
20 pin FANUC connector
5 ...... 15 pol. Sub-D Stecker
15 pin Sub-D connector
7 ...... 17 pol. CONNEI Kupplung (Stift)
17 pin CONNEI coupling (male)
LMKA- 3100 -. , -
Max. Eingangsfrequenz
(nur für SSI / only for SSI)
0(1)
... 9 kHz (1µm) / 2,4 kHz (0,25µm)
1 ... 9 kHz (1µm) / 2,4 kHz (0,25µm)
(1)
Geber für sicherheitsgerichtete Anwendungen
Nur mit analogen Teilungsfaktor 1 möglich
only with analog dividing factor 1 possible
Analoger Teilungsfaktor 1Vss
Analog dividing factor 1Vpp
(nur für SSI / only for SSI)
0 ... 1 (1000 µm)
3 ... 25 (40 µm)
Bestellcode: LMKA-1310x/2310x/1110x/2110x mit SSI Interface
Ordering code: LMKA-1310x/2310x/1110x/2110x with SSI Interface
SSI geführt / guided
SSI
Bestellcode: LMKA-1310x/2310x/1110x/2110x
Ordering code: LMKA-1310x/2310x/1110x/2110x
Kabellänge in Meter
Bevorzugte Kabellänge in 0,5m Schritten
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Auflösung in µm
Resolution in µm
1 .......1µm
2 .......0,25µm
Steckertyp
Connector type
0 ...... ohne / none
2 ...... 20 pol FANUC Stecker
5 ...... 15 pol. Sub-D Stecker
15 pin Sub-D connector
7 ...... 17 pol. CONNEI Kupplung (Stift)
17 pin CONNEI coupling (male)
Interface
Type
1 ... BISS/C
3 ... FANUC
4 (1)
.. Mitsubishi
5 (1)
.. Yaskawa
(1)
In Vorbereitung
in preparation
LMKA- 310 -. , -NN
LMKA- 110 -. , -NN
LMKA- 1100 -. -,
geführt / guided
ELECTROMATE
www.electromate.com
Sold & Serviced By:

30
Abtastkopf
Scanning head
Bestellcode: LMKA-1310x/2310x/1110x/2110x mit DRIVE CLiQ - Interface
Ordering code: LMKA-1310x/2310x/1110x/2110x with DRIVE CLiQ - Interface
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Auflösung in µm
Resolution in µm
1 .......1µm
2 .......0,25µm
Max. Eingangsfrequenz
1 ... 9 kHz (1µm) / 2,4 kHz (0,25µm)
Steckertyp
Connector type
8 ...... 8 pol M12 Stecker (nur für DriveCLiQ)
8 pin M12 connector (just for DriveCLiQ)
LMKA- 3102 -. -1 N 0,5 08
Kabellänge 0,5 Meter
Cable length 0,5 meter
LMKA- 1102 -. -1 N 0,5 08
ELECTROMATE
www.electromate.com
Sold & Serviced By:

31
General information
Maximale Drehzahlen
Maximum speed
Maximum speed
a) Max. speed
The maximum speed nmax
of a measuring system can be calculated considering the max. input frequency f of the scanning head and the num-
ber of pitches per revolution N of the measuring flange as follows:
nmax
[U/min] = f[Hz] x 60 / N
nmax
[rpm] = f[Hz] x 60 / N
b) Output frequency
The max. output signal frequency fa
of the scanning head depends on the max. speed n used in the application, the number of grating pitches
per revolution N and the dividing factor D of a scanning head.
It’s important to not exceed the max. input frequency of the subsequent electronics.
fa
[Hz] = (n[rpm] / 60) x N x D for scanning head with 1Vpp output
Maximum rotary speeds for standard measuring flanges respectively measuring rings are shown below.
Type
Max. input
frequency
f[khz]
Rotary speed n [rev/min]
Standard measuring flange WMFA-210x or measuring ring WMRA-210x
0256 0360 0512 0720 0900 1024 1440 1800 2048
WMKA-2x100.100 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x10x.1xx 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x100.130 60 14000 10000 7000 5000 4000 3500 2500 2000 1750
WMKA-2x10x.2xx 2,4 560 400 280 200 160 140 100 80 70
ELECTROMATE
www.electromate.com
Sold & Serviced By:

32
Kabel
Cable
General information
Ordering code: extension cable
VK - 4 - - -
10A ... without connector
15A ... 15 pin SUB-D
18A ... 17 pin CONNEI connector CCW
19A ... Special connector or special pin assignments
00A ... without connector
02A 20 pin FANUC connector
05A ... 15 pin SUB-D
07A ... 17 pin CONNEI coupling CW
09A ... Special connector or special pin assignments
Cable length
in meter
Kabellänge /Cable length Stift
Pin
Verlängerungskabel
Extension cable
Buchse
Socket
Messsystem
Measuring system
Cable
Cable for measuring system Extension cable
Jacket: PUR, high flexible, suitable for energy chains
Diameter: 5,3mm ~ 8mm
Wires: 5 (2 x 0,05) + 1 ( 2 x 0,14) mm2
4 (2 x 0,14) + 2 ( 2 x 0,5) mm2
Bending radius:
Single bending: 5 x d = 25mm 5 x d = 40mm
Continuous bending: 10 x d = 50mm 10 x d = 80mm
Max. length: 9m 50m
Technical data
ELECTROMATE
www.electromate.com
Sold & Serviced By:

33
General information
Steckerbelegungen
Plug and pin assignments
Plug and connection assignments
15-pin SUB-D connector
Power supply Incremental signals Absolute interface
PIN 4 12 2 10 1 9 3 11 5 13 8 15
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Shield on housing
17 pin CONNEI - coupling (male) 58
26
M23x1
Power supply Incremental signals Absolute interface
PIN 7 1 10 4 15 16 12 13 14 17 8 9
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Shield on housing
No connection allowed on unused pins.
Power supply Absolute interface shield
PIN 18 20 14 12 1 2 5 6 16
Signal +5V +5V 0V 0V Data+ Data- Clock+ Clock- shield
Color red red-white blue blue-white violet black pink grey
Shield on housing
1 2 3 74 5 86 9 10
11 12 2013 14 15 16 17 18 19
ELECTROMATE
www.electromate.com
Sold & Serviced By:

34
Notes
ELECTROMATE
www.electromate.com
Sold & Serviced By:

Additional product brochures
Spindle encoder
Kompakte Bauform■
Compact desig
Höchste Drehzahlen bis zu■
26.000 U/min
High speeds up to
26,000 rpm
Hohe EMV-Festigkeit■
High EMC immunity
Keine magnetischen■
Komponenten oder Felder,
Hysterese oder Entmagneti-
sierungsgefahr
No magnetic components
No magnetic field hystere-
sis or demagnetisation risk
Schutzklasse IP67■
wasserdichte Impulsgeber
Protection class IP67
Fluid submersible encoders
Spindelgeber
nach dem AMOSIN®
– Messprinzip
Spindle encoder based on the AMOSIN®
–
AMO GmbH
Product overview
AMO GmbH
Inductive encoders comparable■
to optical encoders in both,
accuracy and resolution
No magnetic components, no■
magnetic fields, hysteresis or
demagnetisation risk
Protection class IP67■
Fluid submersible encoders
Product overview:
Incremental
LENGTH- AND ANGLE MEASURING
SYSTEMS based on the AMOSIN®
–
Length measuring systems
AMO GmbH
Inkrementelle LÄNGENMESSSYSTEME
nach dem
induktiven AMOSIN®
– Messprinzip
Incremental LENGTH MEASURING SYSTEMS
based on the
AMOSIN®
– Inductive Measuring Principle
Angle measuring systems
AMO GmbH
Inkrementelle WINKELMESSSYSTEME
nach dem
induktiven AMOSIN®
– Messprinzip
Incremental ANGLE MEASURING SYSTEMS
based on the
AMOSIN®
– Inductive Measuring Principle
ELECTROMATE
www.electromate.com
Sold & Serviced By:

AMO GmbH
ELECTROMATE
www.electromate.com
Sold & Serviced By:

AMO Absolute Encoder Catalog

More Related Content

What's hot (19)

Similar to AMO Absolute Encoder Catalog (20)

More from Electromate (20)

Recently uploaded (20)

AMO Absolute Encoder Catalog