Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT)

Nirmal K Thomas.et.al.Int. Journal of Engineering Research and Application www.ijera.com
ISSN: 2248-9622, Vol. 7, Issue 5, (Part -I) May 2017, pp.22-24
www.ijera.com DOI: 10.9790/9622-0705012224 22 | P a g e
Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT)
*Nirmal K Thomas,*Radhika S, **ShyamMohanan.C, *
*Sreelakshmi Rajan,
**Deepak S Koovackal, **Suvarna A
*(Asst.Prof. ,Dept. of Electronics and Communication Engineering, VISAT, Elanji ,Ernakulam ,Kerala ,India
**(Student, Dept. of Electronics and Communication Engineering, VISAT, Elanji ,Ernakulam ,Kerala, India
ABSTRACT
The robotic vehicle can be controlled by a PC or an android device. The GUI interface used to control the robot
is developed in MATLAB, and the android app is developed using MIT appinventor 2. The robotic vehicle is
equipped with an IP web camera for GUI interface and another wireless camera having night vision capability
for remote monitoring/spying purposes. This system can be used in sensitive areas where humans cannot enter
directly. The commands provided by android application/GUI interface are used to move the robot in front,
back and left right directions. The vehicle consists of a Bluetooth receiver interfaced to a PIC microcontroller.
On receiving command from the receiver, the PIC microcontroller operates on the movement of motor through
a driver IC. The android device or laptop can operate the vehicle at a good Bluetooth communication range.
The night vision camera mounted on robot allows for efficient spying even in darkest areas using infrared
lighting.
Keywords: Android, Bluetooth, GUI, IP webcamera, Night vision
I. INTRODUCTION
Spy robots operates very much like a
human Spy. This type of robots can move around in
their environment. Our system aims to build a
simple low cost spy robot. The main advantage of
our system is that its simplicity in circuit and user
interface to control it. The SPY-BOT moves in
required directions as per the commands obtained
from the host.
The host can be a Bluetooth enabled PC or
an android device. The camera used in this robot is
having the ability to produce video output even if it
is in a dark environment. The android app and GUI
interface are designed in a user friendly manner. The
simplicity of it makes easy to operate.
II. BLOCK DIAGRAM
The PIC16F877A [1]
microcontroller is the
main component used in this circuit. The controlling
device sends commands to the HC-05 Bluetooth
module. And it will send characters serially to the
serial communication pins[2]
of PIC microcontroller.
The serially obtained data is used for robot’s motion
in different directions. The output of the night vision
camera can be viewed on an android device.
Fig 1 : Block diagram of the SPY-BOT
III. PRINCIPLE OF OPERATION
AND USER INTERFACE
The PIC microcontroller is programmed in
such a way that it provides output for the motor
driver IC as per the character obtained from the host.
The movement will be as follows for each character.
Table 1 Robot Movement Directions
Character received Motion / operation
A Front
B Back
C Left
D Right
E Stop
1 Camera ON
2 Camera OFF
RESEARCH ARTICLE OPEN ACCESS

Fig3: Screen shot of SPY-BOT application
Fig3: Matlab Gui interface for controlling the robot
IV. CIRCUIT OPERATION
The Bluetooth module interfaced with the
PIC microcontroller will receives characters as data
from the host. TX[1]
and RX[1]
pins of PIC IC are
connected to the Bluetooth module. The PIC
microcontroller is programmed in such a way to
produce outputs for the motor driving IC so as to
make required motion by the motors. The L293D[3]
will produce output as per the input obtained from
the PIC microcontroller. And one of the output pins
of PIC microcontroller is connected to the relay for
the switching purpose of the night vision camera. If
we are using an android device for the controlling
purpose, we have to pair the HC-05 Bluetooth
module with our smart phone. After pairing we have
to open the SPY-BOT application in our smart
phone and wait for a second to establish connection
between the smart phone and HC-05 Bluetooth
module. Once connection is made successfully we
can start controlling the robot by touching on the
buttons on your Smartphone’s screen.
Fig3: Circuit diagram of SPY-BOT
The night vision camera in this project is
also having a wireless connectivity. By using a
Smartphone we can see the visuals in it. It is
connected to the android Smartphone by using wifi
as medium. Once the camera is turned on it produces
a wifi hotspot. We have to connect to this hotspot
using our phone’s wifi. An application obtained
from Google play store is used to interact with this
camera. The wireless camera also supports voice
transmission to smart phone and also it receives
voice from the Smart phone. When the camera is in
dark area the IR lights are turned on and produces
night vision visuals on our smart phone.
V. ALGORITHM FOR SPY-BOT
OPERATION
1. Start
2. Declare and define all functions and variables as
per our requirement and Initialize the ports.
3. Call stop function initially to stop the robot.
4. Initialize UART and set baud rate.
5. 5. Check if UART1_Data_Ready() is then
go to step 6 else continue in this step.
6. Copy the data obtained serially to a variable
uart_rd.
7. Check if the character obtained in the variable
uart_rd is A then call front function to move the
robot in front direction.

uart_rd is B then call back function to move the
robot in back direction.
uart_rd is C then call left function to move the
robot in left direction.
uart_rd is D then call right function to move the
robot in right direction.
uart_rd is E then call stop function to stop the
robot.
uart_rd is 1 then call camera on function to turn
on the camera.
uart_rd is 1 then call camera off function to turn
off the camera.
14. Go to step 6
15. stop
VI.CONCLUSION
The robotic vehicle is equipped with a
wireless camera having night vision capability for
remote monitoring/spying purposes. The system is a
simple one which makes it easy to design and
maintain. The same hardware can be used for both
GUI and android device to control the movement of
the robot. Which makes it small in size of PCB. It
can be used in environments like forests and other
places where humans cannot possibly enter during
the night. At the time of war where it can be used to
collect information from the enemy and monitor that
information at a far secure area, and safely make
plans for the counter attack. The range of controlling
is limited in Bluetooth range. By using a night vision
camera with IP address the number of cameras used
can be reduced to one.
REFERENCES
[1]. Muhammad Ali Mazidi, PIC microcontroller
and embedded systems using assembly and C
for PIC18(Pearson publications).
[2]. Ramesh S Gaonkar, Fundamentals of
Microcontrollers and applications in Embeded
systems with PIC microcontrollers(Thomson
publications)
[3]. Prerna Jain, Pallavi N. Firke, Kalyanee N.
Kapadnis, Trupti S. Patil, and Sonali S., RF
based Spy Robot, International Journal of
Engineering Research and Applications,
18(2),ISSN : 2248-9622, Vol. 4, Issue 4(
Version 2), April 2014, pp.06-09

Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT)

More Related Content

What's hot (20)

Similar to Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT) (20)

Recently uploaded (20)

Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT)