applayerslides.ppt

Application Layer 2-1
Application Layer
Adapted from:
Computer Networking:
A Top Down Approach
6th edition
Jim Kurose, Keith Ross
Addison-Wesley
March 2012
All material copyright 1996-2012
J.F Kurose and K.W. Ross, All Rights Reserved

Application Layer
Chapter outline
- Principles of network applications
- Web and HTTP
- FTP
- Electronic mail
 SMTP, POP3, IMAP
- DNS
- DHCP

Internet apps: application, transport protocols
application
e-mail
remote terminal access
Web
file transfer
streaming multimedia
Internet telephony
application
layer protocol
SMTP [RFC 2821]
Telnet [RFC 854]
HTTP [RFC 2616]
FTP [RFC 959]
HTTP (e.g., YouTube),
RTP [RFC 1889]
SIP, RTP, proprietary
(e.g., Skype)
underlying
transport protocol
TCP
TCP
TCP
TCP
TCP or UDP
TCP or UDP

Application architectures
possible structure of applications:
 client-server
 peer-to-peer (P2P)

Client-server architecture
server:
 always-on host
 permanent IP address
 data centers for scaling
clients:
 communicate with server
 may be intermittently
connected
 may have dynamic IP
addresses
 do not communicate
directly with each other
client/server

P2P architecture
 no always-on server
 arbitrary end systems
directly communicate
 peers request service
from other peers, provide
service in return to other
peers
 self scalability – new
peers bring new
service capacity, as
well as new service
demands
 peers are intermittently
connected and change IP
addresses
 complex management
peer-peer

Processes communicating
process: program
running within a host
 within same host, two
processes communicate
using inter-process
communication (defined
by OS)
 processes in different
hosts communicate by
exchanging messages
client process: process
that initiates
communication
server process: process
that waits to be
contacted
 aside: applications with
P2P architectures have
client processes & server
processes
clients, servers

Sockets
 process sends/receives messages to/from its socket
 socket analogous to door
 sending process shoves message out door
 sending process relies on transport infrastructure on
other side of door to deliver message to socket at
receiving process
Internet
controlled
by OS
controlled by
app developer
transport
application
physical
link
network
process
transport
application
physical
link
network
process
socket

Addressing processes
 to receive messages,
process must have
identifier
 host device has unique
32-bit IP address
 Q: does IP address of
host on which process
runs suffice for identifying
the process?
 identifier includes both IP
address and port numbers
associated with process
on host.
 example port numbers:
 HTTP server: 80
 mail server: 25
 to send HTTP message to
gaia.cs.umass.edu web
server:
 IP address: 128.119.245.12
 port number: 80
 A: no, many
processes can be
running on same host

App-layer protocol defines
 types of messages
exchanged,
 e.g., request,
response
 message syntax:
 what fields in
messages & how
fields are delineated
 message semantics
 meaning of
information in fields
 rules for when and how
processes send &
respond to messages
open protocols:
 defined in RFCs
 allows for
interoperability
 e.g., HTTP, SMTP
proprietary protocols:
 e.g., Skype

Chapter 2: outline
2.1 principles of
network
applications
 app architectures
 app requirements
2.2 Web and HTTP
2.3 FTP
2.4 electronic mail
 SMTP, POP3,
IMAP
2.5 DNS
- DHCP

Web and HTTP
First, a review…
 web page consists of objects
 object can be HTML file, JPEG image, Java
applet, audio file,…
 web page consists of base HTML-file which
includes several referenced objects
 each object is addressable by a URL, e.g.,
www.someschool.edu/someDept/pic.gif
host name path name

HTTP overview
HTTP: hypertext
transfer protocol
 Web’s application layer
protocol
 client/server model
 client: browser that
requests, receives,
(using HTTP
protocol) and
“displays” Web
objects
 server: Web server
sends (using HTTP
protocol) objects in
response to requests
PC running
Firefox browser
server
running
Apache Web
server
iphone running
Safari browser

HTTP overview (continued)
uses TCP:
 client initiates TCP
connection (creates
socket) to server, port
80
 server accepts TCP
connection from client
 HTTP messages
(application-layer
protocol messages)
exchanged between
browser (HTTP client)
and Web server (HTTP
server)
 TCP connection closed
HTTP is
“stateless”
 server maintains no
information about
past client requests
protocols that maintain
“state” are complex!
 past history (state) must be
maintained
 if server/client crashes, their
views of “state” may be
inconsistent, must be
reconciled
aside

HTTP connections
non-persistent HTTP
 at most one object
sent over TCP
connection
 connection then
closed
 downloading
multiple objects
required multiple
connections
persistent HTTP
 multiple objects can
be sent over single
TCP connection
between client,
server

Non-persistent HTTP
suppose user enters URL:
1a. HTTP client initiates TCP
connection to HTTP server
(process) at
www.someSchool.edu on port
80
2. HTTP client sends HTTP
request message (containing
URL) into TCP connection
socket. Message indicates
that client wants object
someDepartment/home.inde
x
1b. HTTP server at host
www.someSchool.edu
waiting for TCP connection
at port 80. “accepts”
connection, notifying client
3. HTTP server receives
request message, forms
response message
containing requested object,
and sends message into its
socket
time
(contains text,
references to 10
jpeg images)
www.someSchool.edu/someDepartment/home.index

Non-persistent HTTP (cont.)
5. HTTP client receives response
message containing html file,
displays html. Parsing html file,
finds 10 referenced jpeg
objects
6. Steps 1-5 repeated for each
of 10 jpeg objects
4. HTTP server closes TCP
connection.
time

Non-persistent HTTP: response time
RTT (definition): time for a
small packet to travel from
client to server and back
HTTP response time:
 one RTT to initiate TCP
connection
 one RTT for HTTP
request and first few bytes
of HTTP response to
return
 file transmission time
 non-persistent HTTP
response time =
2RTT+ file
transmission time
time to
transmit
file
initiate TCP
connection
RTT
request
file
RTT
file
received
time time

Persistent HTTP
non-persistent HTTP
issues:
 requires 2 RTTs per
object
 OS overhead for each
TCP connection
 browsers often open
parallel TCP connections
to fetch referenced
objects
persistent HTTP:
 server leaves
connection open after
sending response
 subsequent HTTP
messages between
same client/server sent
over open connection
 client sends requests as
soon as it encounters a
referenced object
 as little as one RTT for
all the referenced
objects

HTTP request message
 two types of HTTP messages: request, response
 HTTP request message:
 ASCII (human-readable format)
request line
(GET, POST,
HEAD commands)
header
lines
carriage return,
line feed at start
of line indicates
end of header lines
GET /index.html HTTP/1.1rn
Host: www-net.cs.umass.edurn
User-Agent: Firefox/3.6.10rn
Accept: text/html,application/xhtml+xmlrn
Accept-Language: en-us,en;q=0.5rn
Accept-Encoding: gzip,deflatern
Accept-Charset: ISO-8859-1,utf-8;q=0.7rn
Keep-Alive: 115rn
Connection: keep-alivern
rn
carriage return character
line-feed character

HTTP response message
status line
(protocol
status code
status phrase)
header
lines
data, e.g.,
requested
HTML file
HTTP/1.1 200 OKrn
Date: Sun, 26 Sep 2010 20:09:20 GMTrn
Server: Apache/2.0.52 (CentOS)rn
Last-Modified: Tue, 30 Oct 2007 17:00:02
GMTrn
ETag: "17dc6-a5c-bf716880"rn
Accept-Ranges: bytesrn
Content-Length: 2652rn
Keep-Alive: timeout=10, max=100rn
Connection: Keep-Alivern
Content-Type: text/html; charset=ISO-8859-
1rn
rn
data data data data data ...

HTTP response status codes
200 OK
 request succeeded, requested object later in this msg
301 Moved Permanently
 requested object moved, new location specified later in this
msg (Location:)
400 Bad Request
 request msg not understood by server
404 Not Found
 requested document not found on this server
505 HTTP Version Not Supported
 status code appears in 1st line in server-to-
client response message.
 some sample codes:

FTP: the file transfer protocol
file transfer
FTP
server
FTP
user
interface
FTP
client
local file
system
remote file
system
user
at host
 transfer file to/from remote host
 client/server model
 client: side that initiates transfer (either to/from
remote)
 server: remote host
 ftp: RFC 959
 ftp server: port 21

FTP: separate control, data
connections
 FTP client contacts FTP
server at port 21, using
TCP
 client authorized over
control connection
 client browses remote
directory, sends commands
over control connection
 when server receives file
transfer command, server
opens 2nd TCP data
connection (for file) to client
 after transferring one file,
server closes data
connection
FTP
client
FTP
server
TCP control connection,
server port 21
TCP data connection,
server port 20
 server opens another
TCP data connection to
transfer another file
 control connection: “out
of band”
 FTP server maintains
“state”: current directory,
earlier authentication

FTP commands, responses
sample commands:
 sent as ASCII text over
control channel
 USER username
 PASS password
 LIST return list of file in
current directory
 RETR filename
retrieves (gets) file
 STOR filename
stores (puts) file onto
remote host
sample return codes
 status code and phrase
(as in HTTP)
 331 Username OK,
password required
 125 data
connection
already open;
transfer starting
 425 Can’t open
data connection
 452 Error writing
file

Electronic mail
Three major
components:
 user agents
 mail servers
 simple mail transfer
protocol: SMTP
User Agent
 a.k.a. “mail reader”
 composing, editing,
reading mail messages
 e.g., Outlook,
Thunderbird, iPhone
mail client
 outgoing, incoming
user mailbox
outgoing
message queue
mail
server
mail
server
mail
server
SMTP
SMTP
SMTP
user
agent
user
agent
user
agent
user
agent
user
agent
user
agent

Electronic mail: mail servers
mail servers:
 mailbox contains
incoming messages for
user
 message queue of
outgoing (to be sent)
mail messages
 SMTP protocol between
mail servers to send
email messages
 client: sending mail
server
 “server”: receiving
mail server
mail
server
mail
server
mail
server
SMTP
SMTP
SMTP
user
agent
user
agent
user
agent
user
agent
user
agent
user
agent

Electronic Mail: SMTP [RFC 2821]
 uses TCP to reliably transfer email message
from client to server, port 25
 direct transfer: sending server to receiving
server
 three phases of transfer
 handshaking (greeting)
 transfer of messages
 closure
 command/response interaction (like HTTP,
FTP)
 commands: ASCII text
 response: status code and phrase
 messages must be in 7-bit ASCI

user
agent
Scenario: Alice sends message to
Bob
1) Alice uses UA to compose
message “to”
bob@someschool.edu
2) Alice’s UA sends
message to her mail
server; message placed in
message queue
3) client side of SMTP opens
TCP connection with
Bob’s mail server
4) SMTP client sends Alice’s
message over the TCP
connection
5) Bob’s mail server places
the message in Bob’s
mailbox
6) Bob invokes his user
agent to read message
mail
server
mail
server
1
2 3 4
5
6
Alice’s mail server Bob’s mail server
user
agent

Sample SMTP interaction
S: 220 hamburger.edu
C: HELO crepes.fr
S: 250 Hello crepes.fr, pleased to meet you
C: MAIL FROM: <alice@crepes.fr>
S: 250 alice@crepes.fr... Sender ok
C: RCPT TO: <bob@hamburger.edu>
S: 250 bob@hamburger.edu ... Recipient ok
C: DATA
S: 354 Enter mail, end with "." on a line by itself
C: Do you like ketchup?
C: How about pickles?
C: .
S: 250 Message accepted for delivery
C: QUIT
S: 221 hamburger.edu closing connection

SMTP: final words
 SMTP uses persistent
connections
 SMTP requires
message (header &
body) to be in 7-bit
ASCII
 SMTP server uses
CRLF.CRLF to
determine end of
message
comparison with
HTTP:
 HTTP: pull
 SMTP: push
 both have ASCII
command/response
interaction, status
codes
 HTTP: each object
encapsulated in its own
response msg
 SMTP: multiple objects
sent in multipart msg

Mail message format
SMTP: protocol for
exchanging email msgs
RFC 822: standard for text
message format:
 header lines, e.g.,
 To:
 From:
 Subject:
different from SMTP
MAIL FROM, RCPT
TO: commands!
 Body: the “message”
 ASCII characters only
header
body
blank
line

Mail access protocols
 SMTP: delivery/storage to receiver’s server
 mail access protocol: retrieval from server
 POP: Post Office Protocol [RFC 1939]:
authorization, download
 IMAP: Internet Mail Access Protocol [RFC 1730]:
more features, including manipulation of stored
msgs on server
 HTTP: gmail, Hotmail, Yahoo! Mail, etc.
sender’s mail
server
SMTP SMTP
mail access
protocol
receiver’s mail
server
(e.g., POP,
IMAP)
user
agent
user
agent

POP3 (more) and IMAP
more about POP3
 previous example uses
POP3 “download and
delete” mode
 Bob cannot re-read
e-mail if he changes
client
 POP3 “download-and-
keep”: copies of
messages on different
clients
 POP3 is stateless
across sessions
IMAP
 keeps all messages in
one place: at server
 allows user to organize
messages in folders
 keeps user state across
sessions:
 names of folders and
mappings between
message IDs and
folder name

DNS: services, structure
why not centralize DNS?
 single point of failure
 traffic volume
 distant centralized
database
 maintenance
DNS services
 hostname to IP address
translation
 host aliasing
 canonical, alias names
 mail server aliasing
 load distribution
 replicated Web
servers: many IP
addresses
correspond to one
name
A: doesn’t scale!

Root DNS Servers
com DNS servers org DNS servers edu DNS servers
poly.edu
DNS servers
umass.edu
DNS servers
yahoo.com
DNS servers
amazon.com
DNS servers
pbs.org
DNS servers
DNS: a distributed, hierarchical
database
client wants IP for www.amazon.com; 1st approx:
 client queries root server to find com DNS server
 client queries .com DNS server to get amazon.com DNS
server
 client queries amazon.com DNS server to get IP address for
www.amazon.com
… …

DNS: root name servers
 contacted by local name server that can not resolve name
 root name server:
 contacts authoritative name server if name mapping not
known
 gets mapping
 returns mapping to local name server
13 root name
“servers”
worldwide
a. Verisign, Los Angeles CA
(5 other sites)
b. USC-ISI Marina del Rey, CA
l. ICANN Los Angeles, CA
(41 other sites)
e. NASA Mt View, CA
f. Internet Software C.
Palo Alto, CA (and 48 other
sites)
i. Netnod, Stockholm (37 other sites)
k. RIPE London (17 other sites)
m. WIDE Tokyo
(5 other sites)
c. Cogent, Herndon, VA (5 other sites)
d. U Maryland College Park, MD
h. ARL Aberdeen, MD
j. Verisign, Dulles VA (69 other sites )
g. US DoD Columbus,
OH (5 other sites)

TLD, authoritative servers
top-level domain (TLD) servers:
 responsible for com, org, net, edu, aero, jobs,
museums, and all top-level country domains, e.g.: uk,
fr, ca, jp
 Network Solutions maintains servers for .com TLD
 Educause for .edu TLD
authoritative DNS servers:
 organization’s own DNS server(s), providing
authoritative hostname to IP mappings for
organization’s named hosts
 can be maintained by organization or service
provider

Local DNS name server
 does not strictly belong to hierarchy
 each ISP (residential ISP, company,
university) has one
 also called “default name server”
 when host makes DNS query, query is sent to
its local DNS server
 has local cache of recent name-to-address
translation pairs (but may be out of date!)
 acts as proxy, forwards query into hierarchy

requesting host
cis.poly.edu
gaia.cs.umass.edu
root DNS server
local DNS server
dns.poly.edu
1
2
3
4
5
6
authoritative DNS server
dns.cs.umass.edu
7
8
TLD DNS server
DNS name
resolution example
 host at cis.poly.edu
wants IP address for
gaia.cs.umass.edu
iterated query:
 contacted server
replies with name of
server to contact
 “I don’t know this
name, but ask this
server”

4
5
6
3
recursive query:
 puts burden of
name resolution on
contacted name
server
 heavy load at
upper levels of
hierarchy?
requesting host
cis.poly.edu
gaia.cs.umass.edu
root DNS server
local DNS server
dns.poly.edu
1
2
7
authoritative DNS server
dns.cs.umass.edu
8
DNS name
resolution example
TLD DNS
server

DNS: caching, updating records
 once (any) name server learns mapping, it
caches mapping
 cache entries timeout (disappear) after some time
(TTL)
 TLD servers typically cached in local name servers
• thus root name servers not often visited
 cached entries may be out-of-date (best effort
name-to-address translation!)
 if name host changes IP address, may not be
known Internet-wide until all TTLs expire
 update/notify mechanisms proposed IETF
standard
 RFC 2136

43
DHCP: Dynamic Host Configuration
Protocol
 dynamically allocates IP addresses and
configuration options to hosts on a network
 Based on BOOTP protocol
 3 methods of allocation:
 Manual allocation
 Automatic allocation
 Dynamic allocation
 In dynamic allocation addresses are “leased” to
hosts temporarily. (The duration of lease can vary
depending on traffic and number of addresses
available for a certain number of clients)
 Non-routable, requires relay agents to route across
subnets

44
DHCP client-server scenario

45
DHCP client-server interaction

applayerslides.ppt

More Related Content

Similar to applayerslides.ppt (20)

Recently uploaded (20)

applayerslides.ppt