Azbil AX Series Vortex Flow Meters

The readings you
need, right where
you need them.
AX Series
Vortex Meters
PSI Controls / Piping Specialties, Inc. | 800-223-1468 | www.psi-team.com

2
Vortex multivariable meters from Azbil North America
employ three sensing elements in a single meter: a vortex
shedding velocity sensor, an RTD temperature sensor,
and a solid-state pressure transducer. Within this single
instrument, you can measure the mass flow rates of gasses,
liquids, and steam with far more accuracy than with
external measurement techniques which may not adequately
compensate for dynamic process conditions. With the
flexibility to install in almost any location—including hot
tapping—you can get precise measurements from nearly any
location when you need it.
Multivariable capability within this single housing can also
simplify systems, reduce equipment cost, and
ease installation and maintnence hassles. The
wide variety of options and configurations available ensures
that there is a meter for any application requirement.
• Inline install in pipes from 1/2” to 8”
• Hot-tap without process shutdown in any pipe
larger than 2”
• Field configurable
• Remote electronics option for harsh environments
or diﬃcult locations
• 4-20mA - loop-powered technology saves on
energy costs
• HART protocol - Standard
• Modbus and BACnet communications available
• FM, FMC, ATEX, IECEx Approved
• Volumetric or mass flow monitoring of most liquids,
gasses, and steam
• Delivers multiple readings from a single installed
location, reducing cost and complexity
• Compensated mass flow readings
• Energy Monitoring in real time
• Simple and reliable - no moving parts, easy
installation, no fluid to sensor contact
• Rangeability up to 100:1
• Temperature up to 750ºF
• Pressure up to 1500 psig
Multivariable function from a single meterMultivariable function from a single meterMultivariable function from a single meter
Right Where You Need ThemRight Where You Need ThemRight Where You Need ThemThe Readings You WantThe Readings You WantThe Readings You Want
AX 2200

3
The AX Series of Vortex inline flowmeters measure flows of liquid, gas,
and steam by measuring the rate at which vortices are alternately shed
from a bluff body; this rate has been shown to be directly proportional
to the flow velocity.
As flow passes a bluff body in the stream, vortices create pressure
differentials which are measured by a piezoelectric crystal sensor, which
converts these pulses into electrical signals. The meter uses an all welded
sensor design to create a strong unit and minimize potential leakage.
The AX Series can be configured to measure anything from simple
volumetric flow of liquids and saturated steam up through multivariable
measurements, including mass flow rate, pressure, temperature and
density of liquids and steam.
Insertion style vortex meters measure flow by detecting the local velocity
at a strategically located position within the pipe. Using local velocity,
calculated by measuring the rate at which vortices are alternately shed
from a bluff body within the sensor, the AX2300 uses parameters such
as fluid type, pipe size, and Reynolds number to calculate accurate
measurements.
The AX2300 offers flow computer functionality in a compact, hot-
tappable field device. It can be configured to deliver up to three analog
4-20mA outputs of five process measurements, including volumetric flow
rate, mass flow rate, pressure, temperature and density. With the Energy
Monitoring option, the AX2200 and AX 2300 can also be configured to
measure energy consumption within a process or plant.
Principles of OperationPrinciples of OperationPrinciples of Operation
Many ConfigurationsMany ConfigurationsMany Configurations
AX2200/2300 - Delivers direct readings of volumetric
flow rate in applications ranging from general water flows to
hudrocarbon fuel flow measurement.
AX2211/2311 - Integrates a precision 1000 Ω platinum
RTD temperature sensor for output of a compensated mass
reading, typically for flow rates of saturated steam.
AX2222/2322 - Flow computing functionality in a compact
field device. This multivariable instrument features both
temperature and pressure sensors to provide instantaneous
reading of compensated mass flow rates of gasses, liquids
and steam. Offers basic output and alarm as well as up to
three 4-20 mA outputs of live process measurements. These
output selections are field configurable. The AX2233/2333
offers the same functionality using an external pressure input.
AX2244/2344 - Allows for real-time measurement of
energy consumption for a facility or process in steam, hot
water, or chilled water. Uses the input from a second sensor
on the opposite leg of the process to calculate the change
in energy. Can be configured to read in Btu, joules, calories,
Watt-hours, Megawatt- hours, and horsepower hours. Local
or remote electronics indicate two temperatures, delta T,
mass total and energy total.
Depending on your needs, these meters are available in the following configurations:

4
Repeatability
Mass Flow Rate ±0.2% of rate
Volumetric Flow Rate ±0.1% of rate
Temperature ±0.2°F (±0.1°C)
Pressure ±0.05% of full scale
Density ±0.1% of reading
Stability Over 12 Months
Mass Flow Rate ±0.2% of rate
Volumetric Flow Rate ± negligible
Temperature ±0.9°F (±0.5°C)
Pressure ±0.1% of full scale
Density ±0.1% of reading
Response Time
Adjustable from 1 to 100 seconds.
Operating Specifications
Any gas, liquid or steam compatible with 316L stainless steel. Consult
factory for other materials or construction.
Not recommended for multi-phase fluids.
Process and Ambient Temperature
Process Standard Temperature: -330 to 500°F (-200 to 260°C)
Process High Temperature: to 750°F (400°C)
Ambient Operating: -40 to 185°F (-40 to 85°C)
Ambient Storage: -40 to 185°F (-40 to 85°C)
Pressure Transducer Ratings
Full Scale Operating Pressure Max. Over-Range Pressure
psia bara psia bara
30 2 60 4
100 7 200 14
300 20 600 40
500 35 1000 70
1500 100 2500 175
AX 2200 Accuracy
Process Variables Liquids Gas & Steam
Volumetric Flow Rate ±0.7% of Rate ±1% of Rate
Mass Flow Rate ±1% of Rate ±1.5% of Rate
Temperature ±2°F (±1°C) ±2°F (±1°C)
Pressure ±0.3% of Full Scale ±0.3% of Full Scale
Density ±0.3% of Reading ±0.5% of Reading
Mass flow rate accuracy for gas and steam based on 50-100% of
pressure range.
AX 2300 Accuracy
Process Variables Liquids Gas & Steam
Volumetric Flow Rate ±1.2% of Rate ±1.5% of Rate
Mass Flow Rate ±1.5% of Rate ±2.0% of Rate
Temperature ±2°F (±1°C) ±2°F (±1°C)
Pressure ±1.5% of Full Scale ±0.3% of Full Scale
Density ±0.3% of Reading ±0.5% of Reading
Mass flow rate accuracy for gas and steam based on 50-100% of
pressure range.
Excellent field performanceExcellent field performanceExcellent field performance
Remote Electronics OptionRemote Electronics OptionRemote Electronics Option
Available on all models

5
Dimensional Outline - AX 2200Dimensional Outline - AX 2200Dimensional Outline - AX 2200
AX 2200 Flange Installation
Weight
Flow Meter
Nominal Size
L H ANSI 150
(PN 16)
ANSI 300
(PN 40)
ANSI 600
(PN 64)
0.5 in
(15 mm)
4.56 in
(116mm)
14.8 in
(376mm)
12 lb
(5.5 kg)
12.5 lb
(5.7 kg)
13 lb
(5.9 kg)
0.75 in
(20 mm)
4.8 in
(122 mm)
15 in
(381 mm)
13 lb
(5.9 kg)
14 lb
(6.4 kg)
14.5 lb
(6.6 kg)
1 in
(25 mm)
4.94 in
(126 mm)
15 in
(381 mm)
13.4 lb
(6.1 kg)
16.3 lb
(7.4 kg)
16.3 lb
(7.4 kg)
1.5 in
(40 mm)
5.5 in
(140mm)
15 in
(384 mm)
14.5 lb
(6.6 kg)
22.7 lb
(10.3 kg)
24.6 lb
(11.2 kg)
2 in
(50 mm)
6.0 in
(153 mm)
15.3 in
(389 mm)
19.4 lb
(8.8 kg)
26.8 lb
(12.2 kg)
33.2 lb
(15.1 kg)
3 in
(80 mm)
6.9 in
(175 mm)
15.8 in
(401 mm)
27.5 lb
(12.5 kg)
39.4 lb
(17.9 kg)
56.1 lb
(25.5 kg)
4 in
(100 mm)
8.0 in
(203 mm)
16.2 in
(411 mm)
43.3 lb
(19.7 kg)
60.3 lb
(27.4 kg)
96 lb
(43.6 kg)
6 in
(150 mm)
9 in
(229 mm)
17.3 in
(439 mm)
48.4 lb
(22 kg)
96 lb
(43.6 kg)
178 lb
(80.8 kg)
8 in
(200 mm)
10.5 in
(267 mm)
18.2 in
(462 mm)
71 lb
(32.2 kg)
148 lb
(67.4 kg)
299 lb
(136 kg)
AX 2200 Wafer Installation
L H Weight
4.56 in
(116mm)
14.8 in
(376mm)
9.8 lb
(4.4 kg)
4.8 in
(122 mm)
15 in
(381 mm)
10 lb
(4.6 kg)
2.8 in
(71 mm)
14.8 in
(376 mm)
10.1 lb
(4.6 kg)
2.8 in
(71 mm)
15.1 in
(384 mm)
11.9 lb
(5.4 kg)
3.0 in
(76 mm)
15.3 in
(389 mm)
14.1 lb
(6.4 kg)
4 in
(102 mm)
15.8 in
(401 mm)
22.7 lb
(10.3 kg)
4.7 in
(119 mm)
16.2 in
(411 mm)
33 lb
(15 kg)
Add 11 lb (5 kg) for remote electronics.
Flange Install Wafer Install

6
Dimensional Outline - AX 2300Dimensional Outline - AX 2300Dimensional Outline - AX 2300
AX 2300 Compression Installation
CL/Compact Length SL/Standard Length EL/Extended Length
A B A B A B
Male NPT 21.6 in
(549 mm)
9.8 in
(249 mm)
38 in
(965 mm)
26.2 in
(665 mm)
50 in
(1270 mm)
38.2 in
(970 mm)
150 lb Flange 21.6 in
(549 mm)
10.9 in
(277 mm)
38 in
(965 mm)
27.3 in
693 (mm)
50 in
(1270 mm)
38.3 in
(998 mm)
(549 mm)
10.8 in
(274 mm)
38 in
(965 mm)
27.2 in
(601 mm)
50 in
(1270 mm)
39.2 in
(996 mm)
(549 mm)
10.4 in
(264 mm)
38 in
(965 mm)
26.8 in
(681 mm)
50 in
(1270 mm)
38.8 in
(986 mm)
AX 2322 Compression Installation
CL/Compact Length SL/Standard Length EL/Extended Length
A B A B A B
Male NPT 24.6 in
(625 mm)
9.8 in
(249 mm)
41 in
(1041 mm)
26.2 in
(665 mm)
53 in
(1346 mm)
38.2 in
(970 mm)
(625 mm)
10.9 in
(277 mm)
41 in
(1041 mm)
27.3 in
693 (mm)
53 in
(1346 mm)
38.3 in
(998 mm)
(625 mm)
10.8 in
(274 mm)
41 in
(1041 mm)
27.2 in
(601 mm)
53 in
(1346 mm)
39.2 in
(996 mm)
(625 mm)
10.4 in
(264 mm)
41 in
(1041 mm)
26.8 in
(681 mm)
53 in
(1346 mm)
38.8 in
(986 mm)
Approximate Weight*
Compression Fitting
CL SL EL
13 lb
(5.7 kg)
14 lb
(6.2 kg)
15 lb
(6.7 kg)
15 lb
(6.8 kg)
16 in
(7.3 kg)
17 lb
(7.8 kg)
17 lb
(7.8 kg)
18 lb
(8.3 kg)
19 lb
(8.8 kg)
18 lb
(8.2 kg)
19 lb
(8.7 kg)
20 lb
(9.2 kg)
*Add 11 lb (5 kg) for remote electronics.
Compression Installation Packing Gl

7
AX 2300 Packing Gland Installation
SL/Standard Length EL/Extended Length
A B A B
Male NPT 40.5 in
(1029 mm)
21.5 in
(546 mm)
52.5 in
(1334 mm)
33.5 in
(851 mm)
(1029 mm)
21.5 in
(546 mm)
52.5 in
(1334 mm)
33.1 in
(841 mm)
(1029 mm)
21.5 in
(546 mm)
52.5 in
(1334 mm)
33.1 in
(841 mm)
600 lb Flange* 40.5 in
(1029 mm)
21.5 in
(546 mm)
52.5 in
(1334 mm)
33.1 in
(841 mm)
Approximate Weight*
Removable Retractor Permanent Retractor
SL EL SL EL
16 lb
(7.1 kg)
17 lb
(7.6 kg)
25 lb
(11.5 kg)
32 lb
(14.5 kg)
21 lb
(9.4 kg)
22 in
(9.9 kg)
30 lb
(13.7 kg)
37 lb
(16.7 kg)
25 lb
(11.3 kg)
26 lb
(11.8 kg)
34 lb
(15.5 kg)
41 lb
(18.5 kg)
n/a n/a 35 lb
(16.0 kg)
42 lb
(19.0 kg)
*Add 11 lb (5 kg) for remote electronics.
ing Gland Packing Gland - Permanent Retractor
AX 2300
shown with optional
permanent retractor

8
Specifications and RequirementsSpecifications and RequirementsSpecifications and Requirements
Power Requirements
DCL Option: 12-36 VDC loop powered (single output)
DCH Option: 12-36 VDC, 300 mA mx (multiple outputs)
AC Option: 85-240 VAC, 50.60Hz, 2 Watts (multiple outputs)
Display
Alphanumeric 2 line x 16 character LCD digital display
Six pushbuttons can be operated with magnetic wand without removal of
enclosure covers
Display can be mounted in 90° intervals for better viewing
Output Signals
Analog: 4-20 mA
Alarm: Solid state relay, 40 VDC
Totalizer Pulse: 50 millisecond pulse, 40 VDC
Volumetric or Loop Powered Mass: One analog, one totalizer pulse, HART
Multivariable option: Up to three analog signals, three alarms, one
totalizer pulse, HART
Multivariable option: Modbus process monitoring
Wetted Materials
Standard 316L Stainless Steel, plus
• Optional Carbon Steel or Hastelloy C
• DuPont Teflon® based thread sealant on models with pressure
transducer
Approvals
FM, FMC Class I, DIV. 1, Groups B,C,D
Class II/III, DIV. 1, Groups E,F,G
IP66, Type 4x, T6 Ta=60°
ATEX II 2 G Ex d IIB + H2 T6
II 2 D EX tD A21 IP66 T85°C Ta=60°C
IECEx Ex d IIB + H2 T6
Ext tD A21 IP66 T85°C Ta=60°C
Velocity Range
Maximum velocity, liquid: 30 ft/sec (9 m/sec)
Minimum velocity, liquid: 1 ft/sec (.3 m/sec)
Maximum velocity, gas or steam: 300 ft/sec (90 m/sec)
Minimum velocity, gas or steam:
5 6
density (lb/ft3
) density (kg/m3
)
Consult your Azbil representative for assistance with calculating flow
range.
Piping Conditions
Condition Pipe Diameters (D)
Upstream Downstream
One 90° elbow before meter 10D 5D
Two 90° elbows before meter 15D 5D
Two 90° elbows before meter, out of
plane
25D 5D
Reduction before meter 10D 5D
Expansion before meter 20D 5D
Partially open valve 25D 5D
Water Min and Max Flow Rates - AX 2200
Rate Nominal Pipe Size (in)
0.5 0.75 1 1.5 2 3 4 6 8
GPM min 0.9 1.4 2.2 5.5 9.2 21 36 81 142
GPM max 22 40 67 166 276 618 1076 2473 4270
Nominal Pipe Size (mm)
15 20 25 40 50 80 100 150 200
M3
/hr min 0.2 0.3 0.5 1.3 2.1 4.7 8.1 18 32
M3
/hr max 5 9 15 38 63 140 244 554 970
Water Min and Max Flow Rates - AX 2300
Rate Nominal Pipe Size (in)
3 6 8 12 16 24
GPM min 20.6 81.3 142 317 501 1138
GPM max 618 2473 4270 9501 15043 34144
Nominal Pipe Size (mm)
80 150 200 300 400 600
M3
/hr min 5.2 20.4 35.4 79.2 125 284
M3
/hr max 157 614 1062 2337 3753 8537

9
Typical Saturated Steam Minimum
and Maximum Flow Rates (lb/hr)
Pressure Nominal Pipe Size (in)
0.5 0.75 1 1.5 2 3 4 6 8
5 psig 6.5
52
12
122
20
265
49
650
82
1087
183
2431
318
4231
722
9594
1264
16806
100 psig 15
271
27
639
46
1386
112
3405
187
5690
419
12729
728
22156
1652
50233
2893
87998
200 psig 20
493
37
1163
62
2525
151
6203
253
10365
565
23184
983
40354
2229
91494
3905
160279
300 psig 24
716
45
1688
74
3664
182
9000
304
15040
680
33642
1184
58556
2685
132763
4704
232575
400 psig 28
941
51
2220
85
4816
209
11831
349
19770
780
44222
1358
76971
3079
174516
5393
305717
500 psig 31
1170
57
2760
95
5988
233
14711
389
24582
870
54987
1514
95710
3433
217001
6014
380148
and Maximum Flow Rates (kg/hr)
Pressure Nominal Pipe Size (mm)
15 20 25 40 50 80 100 150 200
0 barg 3
18
5
42
8
91
19
224
32
375
72
838
126
1459
286
3309
500
5797
5 barg 6
95
11
224
18
485
45
1192
75
1992
176
4455
290
7754
658
17581
1153
30799
10 barg 8
168
15
397
24
862
59
2118
99
3539
222
7915
387
13777
877
21327
1537
54270
15 barg 9
241
17
569
29
1236
71
3036
119
5073
266
11347
463
19750
1050
44779
1840
78444
20 barg 11
314
20
742
33
1610
81
3956
136
6611
304
14787
529
25738
1199
58355
2100
102226
30 barg 13
463
24
1092
40
2370
99
5822
165
9729
369
21763
642
37880
1455
85884
2548
150451
Typical Air Minimum and Maximum Flow Rates (lb/hr)
Pressure Nominal Pipe Size
0.5 0.75 1 1.5 2 3 4 6 8
5 psig 1.8
18
3
41
5
90
13
221
22
369
50
826
87
1437
198
3258
347
5708
100 psig 5
138
9
325
15
704
38
1730
63
2890
141
6466
245
11254
555
25515
972
44698
200 psig 7
258
13
609
21
1322
52
3248
86
5427
193
12140
335
21131
761
47911
1332
83931
300 psig 8
380
15
896
25
1944
63
4775
104
7978
234
17847
407
31064
922
70431
1615
123375
400 psig 10
502
18
1183
29
2568
72
6309
120
10542
269
23580
467
41043
1060
93057
1857
163000
500 psig 11
624
20
1472
33
3195
80
7849
134
13115
300
28034
521
51063
1182
115775
2071
203000
Typical Air Minimum and Maximum Flow Rates (kg/hr)
15 20 25 40 50 80 100 150 200
0 barg 3
28
5
66
9
142
21
250
36
584
79
1307
138
2275
313
5157
549
9034
5 barg 7
165
13
390
21
847
52
2080
87
3476
194
7775
337
13533
764
30682
1339
53749
10 barg 9
304
17
716
29
1554
70
3819
117
6381
262
14273
457
24844
1035
56329
1814
98676
15 barg 11
442
21
1044
34
2265
85
5565
142
9299
317
20801
551
36205
1250
82087
2190
143801
20 barg 13
582
24
1373
40
2979
97
7318
162
12229
363
27354
632
47612
1434
107949
2511
189105
30 barg 16
862
29
2034
48
4414
118
10843
198
18119
442
40529
770
70544
1745
159942
3057
280187
and Maximum Flow Rates (lb/hr)
Pressure Nominal Pipe Size (in)
3 6 8 12 16 24
5 psig 205
2721
800
10633
1385
18412
3099
41196
4893
65039
11132
147954
100 psig 468
14246
1831
55674
3170
96407
7092
215703
11197
340546
25472
774698
200 psig 632
25948
2471
101405
4278
175595
9572
392880
15111
620268
34377
1411029
300 psig 762
37652
2976
147145
5153
254799
11530
570093
18203
900047
41410
2047489
400 psig 873
49494
3412
193420
5908
334930
13219
749382
20870
1183103
47477
2691404
500 psig 974
61543
3805
240507
6588
416468
14741
931816
23272
1471125
52742
3346615
and Maximum Flow Rates (kg/hr)
80 150 200 300 400 600
0 barg 81
938
316
3667
548
6350
1226
14209
1936
22432
4404
51039
5 barg 187
4986
729
19486
1263
33742
2826
75495
4461
119189
10151
271187
10 barg 249
8859
972
34620
1683
59949
3767
134132
5947
211764
13530
481821
15 barg 298
12700
1164
49629
2016
85939
4510
192283
7120
303570
16200
690705
20 barg 340
16550
1329
64676
2301
111995
5148
250581
8128
395609
18493
900119
30 barg 413
24357
1612
95187
2791
164827
6246
368789
9860
582234
22435
1324739
Typical Air Minimum and Maximum Flow Rates (lb/hr)
Pressure Nominal Pipe Size
3 6 8 12 16 24
5 psig 56
924
220
3611
381
6253
852
13991
1345
22089
3059
50250
100 psig 157
7236
615
28279
1065
48969
2383
109564
3763
172977
8560
393500
200 psig 216
13588
843
53101
1460
91950
3266
205732
5156
324804
11729
738886
300 psig 262
19974
1022
78059
1770
135169
3960
302430
6251
477467
14221
1086176
400 psig 301
26391
1175
103136
2034
178593
4551
399588
7186
630859
16346
1435121
500 psig 335
32834
1310
128314
2269
222191
5077
497135
8015
784856
18233
1785464
Typical Air Minimum and Maximum Flow Rates (kg/hr)
80 150 200 300 400 600
0 barg 89
1463
347
5716
601
9897
1345
22145
2124
34962
4833
79547
5 barg 217
8702
847
34006
1467
58885
3282
131751
5181
208004
11788
473266
10 barg 294
15975
1148
62430
1987
108105
4446
241878
7020
381870
15972
868857
15 barg 355
23280
1385
90979
2399
157542
5386
352487
8474
556497
19282
1266162
20 barg 407
30615
1589
119642
2751
207175
6156
463539
9718
731823
22112
1665095
30 barg 495
45361
1934
177268
3349
306961
7493
686801
11829
1084302
26915
2467081
AX 2200 AX 2300

10
˗˗˗
Parent Mode Code
In-Line Multivariable Mass Vortex Flow Meter
AX2200 Volumetric Flow Meter for Liquid, Gas and Steam
AX2211 Velocity and Temperature Sensors
AX2222 Velocity, Temperature and Pressure Sensors
AX2233 Velocity, Temperature and External Pressure Input
AX2244 Energy Output Options
AX2255 Energy Options with Pressure Sensor
Feature 2: Flow Body Line Size
015 1/2-inch Nominal Bore (15mm)
020 3/4-inch Nominal Bore (20mm)
025 1-inch Nominal Bore (25mm)
040 1.5-inch Nominal Bore (40mm)
Feature 3: Meter Body Material
C Carbon Steel
S Stainless Steel
H Hastelloy
Feature 4: Process Connection
FA ANSI 150# Flange
FB ANSI 300# Flange
FC ANSI 600# Flange
D1 DIN PN 16 Flange
D2 DIN PN 40 Flange
D3 DIN PN 64 Flange
WC Wafer ANSI 600#
Feature 5: Electronics Enclosure
LE
R_
Feature 6: Display Option
D
X
Feature 7: Input Power
1 12-36 VDC, 25mA, 1W max, required on loop powered meters, Output Code "A" only
2
3
Feature 8: Output Options
A
B
C
D
E
F
G
Feature 9: Temperature Options
S
H
Feature 10: Pressure Options
X
A
B
C
D
E
Feature 11: Certification Documents
MC
PT
CC
NC
O2
PD
A1 25' Armored Cable with Glands(ATEX, IECEX) V meter only - Adder to Remote option
A3 25' Armored Cable with Glands(ATEX, IECEX) VT, VTP meter only - Adder to Remote option
XX
Three analog outputs (4-20mA), three alarms, one pulse, MODBUS Comm. (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
One analog output (4-20mA), one alarm, one pulse, BACnet Comm. (Input Power Option Code "2" or "3" only)
Three analog outputs (4-20mA), three alarms, one pulse, BACnet Comm. (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
1
NEMA 4X, IP66 Enclosure (Integral)
Remote NEMA 4X, IP66 Enclosure (Specify cable length as second character from Table A)
Digital Display and Programming Buttons
AX2200 015
Future Hazardous Location Approvals (two digit code for each)
No Display
Length (meters)
3
5
NACE Certification
Oxygen Cleaning
12-36 VDC, 300mA, 9W max. - use with Output Codes "B", "C", "D" and "E"
6
Y
PED certified bodies
Maximum 300 psia (20 bara), Proof 600 psia (41 bara)
Material Certificates - US Mill certs on all wetted parts
Pressure Test Certificate
Certificate of Conformance
High Temperature Preocess Temperature 750°F (400°C)
No Pressure Sensor
R3 D
10
15
20
Custom Length
S FA
Standard Temperature Process Temperature -330° to 500°F (-200° to 260°C)
Option Code
1
2
3
4
100-240 VAC, 50/60Hz line power, 5W max. - use with Output Codes "B", "C", "D" and "E"
Model Selection Guide - AX2200 In-Line Vortex Meter
Loop powered option - one analog output (4-20mA), one alarm, one pulse, HART (Input Power Option Code "1" only)
One analog output (4-20mA), one alarm, one pulse, HART Comm. (Input Power Option Code "2" or "3" only)
One analog output (4-20mA), one alarm, one pulse, MODBUS Comm. (Input Power Option Code "2" or "3" only)
Three analog outputs (4-20mA), three alarms, one pulse, HART (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
A S 2 MCPT

11
˗˗ ˗
Parent Mode Code
Insertion Multivariable Mass Vortex Flow Meter
AX2300 Volumetric Flow Meter for Liquid, Gas and Steam
AX2311 Velocity and Temperature Sensors
AX2322 Velocity, Temperature and Pressure Sensors
AX2333 Velocity, Temperature and External Pressure Input
AX2344 Energy Output Options
AX2355 Energy Options with Pressure Sensor
Feature 2: Probe Length
S Standard Length
C Compact Length
E Extended Length
Feature 3: Electronics Enclosure
LE
R_
Feature 4: Display Option
D
X
Feature 5: Input Power
1 12-36 VDC, 25mA, 1W max, required on loop powered meters, Output Code "A" only
2
3
Feature 6: Output Options
A
B
C
D
E
F
G
Feature 7: Temperature Options
S
H
Feature 8: Pressure Options
X
A
B
C
D
E
Feature 9: Process Connections
Code Code
003GPTPNFC
04PGP051FC
RPNGP61PFC
R51GP003FC
R1PGP04PFC
R03GP006FC
R4PGP46PFC
R06GPTPNGP
R6PGP051GP
PGP16
Feature 10: Certification Documents
MC
PT
CC
NC
O2
PD
XX
One analog output (4-20mA), one alarm, one pulse, BACnet Comm. (Input Power Option Code "2" or "3" only)
Model Selection Guide - AX2300 Insertion Vortex Meter
AX2300 S R3 D 1 A S 2 CF150 MCPT
Table A
Option Code Length (meters)
1 3
2 5
013)largetnI(erusolcnE66PI,X4AMEN
Remote NEMA 4X, IP66 Enclosure (Specify cable length as second character from Table A) 4 15
6 20
Y Custom Length
Digital Display and Programming Buttons
No Display
12-36 VDC, 300mA, 9W max. - use with Output Codes "B", "C", "D" and "E"
100-240 VAC, 50/60Hz line power, 5W max. - use with Output Codes "B", "C", "D" and "E"
Loop powered option - one analog output (4-20mA), one alarm, one pulse, HART (Input Power Option Code "1" only)
One analog output (4-20mA), one alarm, one pulse, HART Comm. (Input Power Option Code "2" or "3" only)
One analog output (4-20mA), one alarm, one pulse, MODBUS Comm. (Input Power Option Code "2" or "3" only)
Three analog outputs (4-20mA), three alarms, one pulse, HART (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
Three analog outputs (4-20mA), three alarms, one pulse, MODBUS Comm. (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
Three analog outputs (4-20mA), three alarms, one pulse, BACnet Comm. (AX2222 & AX2233 only), Input Power Option Code "2" or "3" only
Standard Temperature Process Temperature -330° to 500°F (-200° to 260°C)
High Temperature Preocess Temperature 750°F (400°C)
No Pressure Sensor
egnalF#003ISNAhcni2,dnalGgnikcaPTPNhcni2,noisserpmoC
Compression, 2 inch ANSI 150# Flange Packing Gland, DIN DN50 PN 40 Flange
Compression, DIN DN50 PN16 Flange Packing Gland, 2 inch NPT, Retractor
Compression, 2 inch ANSI 300# Flange Packing Gland, 2 inch ANSI 150# Flange, Retractor
Compression, DIN DN50 PN40 Flange Packing Gland, DIN DN50 PN16, Retractor
Compression, 2 inch ANSI 600# Flange Packing Gland, 2 inch ANSI 300# Flange, Retractor
Compression, DIN DN59 PN64 Flange Packing Gland, DIN DN50 PN 40 Flange, Retractor
rotcarteR,egnalF#006ISNAhcni2,dnalGgnikcaPTPNhcni2,dnalGgnikcaP
NACE Certification
Oxygen Cleaning
PED certified bodies
Future Hazardous Location Approvals (two digit code for each)
Packing Gland, 2 inch ANSI 150# Flange Packing Gland, DIN DN50 PN64 Flange, Retractor
Packing Gland, DIN DN50 PN16
Material Certificates - US Mill certs on all wetted parts
Pressure Test Certificate
Certificate of Conformance

us.azbil.com
888-262-4639
CA2-AX2000
AX 2200/2300

Azbil AX Series Vortex Flow Meters

More Related Content

What's hot (20)

Similar to Azbil AX Series Vortex Flow Meters (20)

Recently uploaded (20)

Azbil AX Series Vortex Flow Meters