Bench Top Muffle Furnaces with Temperature Controller by ACMAS Technologies Pvt Ltd.
0 likes191 views
This document summarizes a benchtop muffle furnace model. It features digital temperature control up to 1700°C, safety features like overtemperature protection and a door safety switch. It has adjustable racks and is suitable for ashing organic and inorganic samples for analysis.
Bench Top Muffle Furnaces with Temperature Controller by ACMAS Technologies Pvt Ltd.
- 1. R BENCHTOP MUFFLE FURNACES WITH TEMPERATURE CONTROLLER MODEL NO. - ACM- MF-72230
- 2. Benchtop muffle furnaces are excellent for quantitative analysis and organic and inorganic ashing applications. Single set point models feature digital temperature control. LED displays chamber temperature continuously; displays set point at the touch of a button. Bench Top Muffle furnaces are designed with multiple safeties features and includes a choice of two temperature control options. It reaches a 1700°C maximum temperature. Heavy-duty firebrick insulation surrounds the opening for added durability. The interior chamber features built-in racks that allow adjustable positioning of a ceramic shelf (included), which effectively doubles the working area. It comes with complete with on/off switch, thermocouple and grounded three-wire cord and plug. It has a Safety features for Door safety switch protects operator by removing power to the heating elements upon opening the door. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. It has an adjustable Alarm or over temperature Protection (OTP) setting that can be used to protect the furnace or loaded chamber from excessive heat. Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure BENCHTOP MUFFLE FURNACES WITH TEMPERATURE CONTROLLER R TECHNOCRACY PVT. LTD.
- 3. TECHNOCRACY PVT. LTD. R Ÿ It is ideal for ashing organic or inorganic samples, and ignition tests. Ÿ It Can be used for determination of volatile and suspended solids Ÿ Drop-down door convenient for loading and unloading, Analog controls, Display reads chamber temperature or set-point temperature Ÿ Safety switch removes power from heating elements when door is open. Ÿ Over temperature Protection Ÿ 1700°C maximum temperature SALIENT FEATURES runaway condition. Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber. Door safety switch protects operator by removing power to the heating elements upon opening the door. LED display simultaneously shows both set point and actual furnace temperatures in either °C or °F (programmable models only). It has unique features of Single ramp to set point and a dwell and Single display shows actual temperature or set point. Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes. Holdback feature holds program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance. All SSP and programmable models feature over temperature protection (not available on basic models). Temperature control accuracy is ±1 0C. Models with 31-segment controllers are equipped with a bi-directional, fully isolated RS-232 interface for connecting to prin. Open-coiled heating elements on both sides of chamber provides excellent temperature uniformity.
- 4. R TECHNOCRACY PVT. LTD. Furnace construction Inside Chamber Size Standard Working Temperature Maximum Working Temperature Temperature Control Double shell steel case with cooling fan to keep outside case cool High purity alumina fiber insulation for max. energy saving 160 x 150 x 150mm (6.3" x 5.9" x 5.9"), 3.6L 1600°C or 2912° F (continuous) 1700°C or 3092° F (< 3 hours) PID automatic control via SCR (Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 31 steps programmable. 0~20°C / min (suggestion =< 10°C) +/- 1 °C +/- 5°C over 120 mm (5") @ 1700°C +/- 2°C over 80 mm (3") @ 1700°C Super 1800 grade MoSi2 Heating Elements (30 x 300mm) TECHNICAL SPECIFICATIONS Temperature uniformity Heating Element Heating Rate Temperature Accuracy
- 5. TECHNOCRACY PVT. LTD. R TECHNICAL SPECIFICATIONS B Type (Pt-Rh to Pt-Rh) with Alumina tube AC 208V-240V single phase, 50/60 Hz (50A air breaker required) 3 KW 515 x 500 x 730 mm (20.28" x 20" x 28.75") 100 Kg (230 lbs) One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.) CE certified 45" x 45"x 45” 280 lbs Thermocouple Working Voltage Max. Power Outside Size Net Weight Warranty Certificate Shipping Dimension Shipping Weight
- 6. SALES OFFICE (HONG KONG) SHOWROOM SALES OFFICE (RUSSIA) Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East, Sheung Wan, Hong Kong (PRC) Tel.: 0086-13929598046 0086- 18922303099 E-mail.: hk@acmasindia.com J-284 Sector 1 Bawana Industrial Estate, Bawana, Delhi, INDIA-110039 Tel.: 0091-0-9312219738 (M) +91- 9717741167 E-mail.: info@acmasindia.com Inmed Trade Street Ozerkovsky Embankment, Unit No 50, Straine- 1, Off- 502, Moscow, Russia E-mail.: info@acmasindia.com Tel.: 0049- 79592345 | Email: russia@acmasindia.com TECHNOCRACY PVT. LTD. www.acmasindia.com | www.cleanroom-equipments.com | www.lab-furnaces.com An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products SALES OFFICE (INDIA) th Office no. 506 & 507, 5 Floor, Plot no.- C-9, Pearls Best Height-II, Netaji Subhash Place, Pitam Pura, Delhi- 110034 Land Line No.: +91 - 11- 47619688, Fax: +91-11-47619788 E-mail.: info@acmasindia.com