Bogen Technical IKS8
0 likes80 views
The IKS8 is an incremental magnetic sensing head that can be used for linear and rotary position measurement applications. It has high accuracy and modularity, with configurable resolutions, output frequencies, connectors, and cable lengths. The IKS8 works with custom magnetic scales to provide non-contact measurement solutions for various industrial positioning needs.
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
IKS8-Rev1.0(2016/07/20)
Features
Resolution
61 nm to 625 μm, depending on
the pole length
Max. Movement Speed
up to 75 m/s, depending on the
pole length and resolution
Energy consumption
(without Load)
<65 mA (UB = 5 V)
Operating temperature -20 to +70 °C
Storage temperature -20 to +80 °C
Protection class IP67
LED
Error displayed when distance or
speed too high
Adjustable parameters
Resolution, maximum output frequency and
counting (with optional programming device
and the appropriate software)
Weight
Resolution and Speed
Default Values at Output Frequency F = 1000 kHz
Pole Pitch
P [mm]
Resolution
R [μm]
Max. Movement Speed
Vmax [m/s]
0.5 0.25 1
1 0.5 2
2 1 4
2.54 1.27 5.08
5 2.5 10
Complete range of adjustable resolutions after evalutation of four
edges can be calculated as follows:
[Resolution (mm)] = [Pole Pitch (mm)] / [Resolution Factor]
Existing resolution factors:
8, 16, 25, 32, 40, 50, 64, 80, 100, 125, 128, 160, 200, 250, 256, 320, 400,
500, 512, 800, 1000, 1024, 1600, 2000, 2048, 4096, 8192
Sensing Head Variants
Pole pitch 0.5 mm; 1 mm; 2 mm; 2.54mm; 5 mm
Reference Reference chip for 2nd track (except for 0.5 mm pole pitch) or periodically from the pole pitch
Voltage
V5 = 5 V ± 5 %
V732 = 7 - 32 V
Interface (without load)
D1 = RS422 (0 to 5 V)
D2 = Push-Pull HTL (0 to supply voltage)
D3 = Push-Pull TTL (0 to 5 V)
Cable length of sensing head
Standard 2 m, optional variable
length from 10 cm up to 6 m
Connector open cable end, optional plug according to order code, other specifications on request
2/5
RS 422 Z0
Signal
Inverted
Signal
Sensor Subsequent Electronics
Differential
Line
Receiver
Load
Signal
Sensor
I
LR
Push-Pull
Output Circuit
Push-Pull (HTL, TTL)
B
A
Z
B
/B
/A
A
/Z
Z
RS422
Push-Pull
Output Signals
Signals A, /A, B, /B, Z, /Z (1) Phase shift A and B 90° ±10° electrical
(2) Signal period depending on the reference track pattern
or as a periodic reference depending on the pole pitch
Z Length default is 1 count
B
A
Z
B
/B
/A
A
/Z
Z
RS422
Push-Pull
Load resistor Z0 = 120 Ω at the receiving end
RS 422 Z0
Signal
Inverted
Signal
Sensor Subsequent Electronics
Differential
Line
Receiver
Load
Signal
Sensor
I
LR
Push-Pull
maximum of 250 mA per channel
RS422
(1)
(2)
(1)
(2)
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetiks8rev10-170428191723/85/Bogen-Technical-IKS8-2-320.jpg)
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
IKS8-Rev1.0(2016/07/20)
F
G
A
H
B
Pole Pitch
0.5 mm
Pole Pitch
1 mm
Pole Pitch
2 mm
Pole Pitch
2.54 mm
Pole Pitch
5 mm
A [mm] 0.1 to 0.25 0.1 to 0.5 0.1 to 1.0 0.1 to 1.27 0.1 to 2.5
B (3)
[mm] 2.5 2.5 2.5 2.5 2.5
B (4)
[mm] 0.5 0.5 0.5 0.5 0.5
G 0.5° 1° 1° 1° 1°
H 1° 3° 3° 3° 3°
F 3° 3° 3° 3° 3°
(3)
relative to 10 mm scale width (1-track)
(4)
relative to 10 mm scale width (2-track)
Installation Tolerances
Dimensions
3/5
35
25,5
6 74,5 17
4,5
17,5
4,5
10
10
6
3
3,5
2,5
7,5
REF
INKR
5
17,5
35
25,5
6 74,5 17
4,5
17,5
4,5
10
10
6
3
3,5
2,5
7,5
REF
INKR
5
17,5
INKR
Pin Assignment
Signal (5)
Color
Pin No.
C1
RJ45 (8P8C)
C2
M12 plug (male)
C3
D-SUB 9 (male)
C4
D-SUB 15 (male)
C5
D-SUB 25 (female)
C6
D-SUB 15 HD (male)
V - blue 1 1 9 2 2 + 16 (6)
2
V+ red 2 2 5 7 1 + 14 (6)
7
A brown 3 3 4 14 3 14
/A green 4 4 8 6 4 6
B gray 5 5 3 13 6 13
/B yellow 6 6 7 5 7 5
Z pink 7 7 2 12 17 12
/Z white 8 8 6 4 18 4
Shield - - 1 Case Case Case Case + 15
(5) PIN 1 with Pin 14 and Pin 2 with Pin 16 connected through solder bridge
1
5
6
2
7
4
3
8
6
5
1
9
91
8 15
14 1
1325
11
5
1
15
6
10
C1: RJ45 (8P8C) C2: M12 plug, (male) C3: D-SUB 9 (male) C4: D-SUB 15 (male) C5: D-SUB 25 (female) C6: D-SUB 15 HD (male)
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetiks8rev10-170428191723/85/Bogen-Technical-IKS8-3-320.jpg)
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
IKS8-Rev1.0(2016/07/20)
Order Code
- Z P V D R F C L
Parameter
IKS8
Code (7)
Explanation (7)
Z Reference Signal
Z1 periodic index signal from the pole pitch (standard)
Z2 from reference marks (requires 2-track magnetic tape with incremental track and reference track)
P
Pole Pitch
[mm]
P0.5 0.5 mm (not interoperable with Z2)
P1 1 mm
P2 2 mm
P2.54 2.54 mm
P5 5 mm
V
Supply Voltage
[V]
V5 5 V
V732 7...32 V
D Interface
D1 RS422
D2 Push-Pull HTL
D3 Push-Pull TTL
R
Resolution(9)
[μm]
R0.25 Standard for pole pitch 0.5 mm
R0.5 Standard for pole pitch 1 mm
R1 Standard for pole pitch 2 mm
R1.27 Standard for pole pitch 2.54 mm
R2.5 Standard for pole pitch 5 mm
R… Other non-standard resolutions, see section "Resolution and Speed" page 2
F
Maximum Output
Frequency [kHz]
F3500 3500 kHz
F1500 1500 kHz
F1000 1000 kHz
F500 500 kHz
F50 50 kHz
F10 10 kHz
C Connector
C1 RJ45 Plug
C2 M12 plug (male)
C3 D-SUB 9 (male)
C4 D-SUB 15 (male)
C5 D-SUB 25 (female)
C6 D-SUB 15 HD (male)
C99 Customer specific connector.
L
Cable Length
[m]
L1 1 m
L2 2 m
L3 3 m
L… … m
L6 6 m
(7)
standard parameters are bold
5/5
Ordering Example
IKS8-Z1P2V5D1R1F1000C1L2
IKS8 Magnetic Sensing Head with periodic index signal, 2 mm pole pitch, voltage 5 V, interface
RS422, 1 μm resolution, max. output frequency 1000 kHz, RJ45 conncetor, cable length 2 m
IKS8-Z2P5V732D3R125F50C2L5
IKS8 Magnetic Sensing Head with reference signal from reference marks (2-track magnetic tape),
2 mm pole pitch, voltage 7 – 32 V (broad-range), interface Push-Pull TTL, 125 μm resolution, max.
output frequency 50 kHz, M12 plug conncetor, cable length 5 m
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetiks8rev10-170428191723/85/Bogen-Technical-IKS8-5-320.jpg)
Bogen Technical IKS8
- 1. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com IKS8-Rev1.0(2016/07/20) Measuring movements with the IKS8 – simple – precise – economic IKS8 Incremental Magnetic Sensing Head - Linear applications - Rotary applications - Non contact, quick position measurement Measuring Positioning 1/5 Features • Precise • Programmable with PC or App • Single piece unit • Programmable resolutions • Customisable output frequencies • A variety of connectors with adaptable cable lengths • No wear from usage • High measuring distance tolerance • Resistant to dust, cooling lubricant emulsion, oil, etc. • Unlimited measuring length The incremental magnetic sensing head IKS8 for linear and rotary applications impresses customers with an extremely high accuracy and a particularly high degree of modularity. BOGEN offers different variants of the IKS8 that can be configured to customer-specific requirements. In combination with an individual scale, measurement solutions for almost every application can be custom-tailored. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 2. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com IKS8-Rev1.0(2016/07/20) Features Resolution 61 nm to 625 μm, depending on the pole length Max. Movement Speed up to 75 m/s, depending on the pole length and resolution Energy consumption (without Load) <65 mA (UB = 5 V) Operating temperature -20 to +70 °C Storage temperature -20 to +80 °C Protection class IP67 LED Error displayed when distance or speed too high Adjustable parameters Resolution, maximum output frequency and counting (with optional programming device and the appropriate software) Weight Resolution and Speed Default Values at Output Frequency F = 1000 kHz Pole Pitch P [mm] Resolution R [μm] Max. Movement Speed Vmax [m/s] 0.5 0.25 1 1 0.5 2 2 1 4 2.54 1.27 5.08 5 2.5 10 Complete range of adjustable resolutions after evalutation of four edges can be calculated as follows: [Resolution (mm)] = [Pole Pitch (mm)] / [Resolution Factor] Existing resolution factors: 8, 16, 25, 32, 40, 50, 64, 80, 100, 125, 128, 160, 200, 250, 256, 320, 400, 500, 512, 800, 1000, 1024, 1600, 2000, 2048, 4096, 8192 Sensing Head Variants Pole pitch 0.5 mm; 1 mm; 2 mm; 2.54mm; 5 mm Reference Reference chip for 2nd track (except for 0.5 mm pole pitch) or periodically from the pole pitch Voltage V5 = 5 V ± 5 % V732 = 7 - 32 V Interface (without load) D1 = RS422 (0 to 5 V) D2 = Push-Pull HTL (0 to supply voltage) D3 = Push-Pull TTL (0 to 5 V) Cable length of sensing head Standard 2 m, optional variable length from 10 cm up to 6 m Connector open cable end, optional plug according to order code, other specifications on request 2/5 RS 422 Z0 Signal Inverted Signal Sensor Subsequent Electronics Differential Line Receiver Load Signal Sensor I LR Push-Pull Output Circuit Push-Pull (HTL, TTL) B A Z B /B /A A /Z Z RS422 Push-Pull Output Signals Signals A, /A, B, /B, Z, /Z (1) Phase shift A and B 90° ±10° electrical (2) Signal period depending on the reference track pattern or as a periodic reference depending on the pole pitch Z Length default is 1 count B A Z B /B /A A /Z Z RS422 Push-Pull Load resistor Z0 = 120 Ω at the receiving end RS 422 Z0 Signal Inverted Signal Sensor Subsequent Electronics Differential Line Receiver Load Signal Sensor I LR Push-Pull maximum of 250 mA per channel RS422 (1) (2) (1) (2) ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 3. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com IKS8-Rev1.0(2016/07/20) F G A H B Pole Pitch 0.5 mm Pole Pitch 1 mm Pole Pitch 2 mm Pole Pitch 2.54 mm Pole Pitch 5 mm A [mm] 0.1 to 0.25 0.1 to 0.5 0.1 to 1.0 0.1 to 1.27 0.1 to 2.5 B (3) [mm] 2.5 2.5 2.5 2.5 2.5 B (4) [mm] 0.5 0.5 0.5 0.5 0.5 G 0.5° 1° 1° 1° 1° H 1° 3° 3° 3° 3° F 3° 3° 3° 3° 3° (3) relative to 10 mm scale width (1-track) (4) relative to 10 mm scale width (2-track) Installation Tolerances Dimensions 3/5 35 25,5 6 74,5 17 4,5 17,5 4,5 10 10 6 3 3,5 2,5 7,5 REF INKR 5 17,5 35 25,5 6 74,5 17 4,5 17,5 4,5 10 10 6 3 3,5 2,5 7,5 REF INKR 5 17,5 INKR Pin Assignment Signal (5) Color Pin No. C1 RJ45 (8P8C) C2 M12 plug (male) C3 D-SUB 9 (male) C4 D-SUB 15 (male) C5 D-SUB 25 (female) C6 D-SUB 15 HD (male) V - blue 1 1 9 2 2 + 16 (6) 2 V+ red 2 2 5 7 1 + 14 (6) 7 A brown 3 3 4 14 3 14 /A green 4 4 8 6 4 6 B gray 5 5 3 13 6 13 /B yellow 6 6 7 5 7 5 Z pink 7 7 2 12 17 12 /Z white 8 8 6 4 18 4 Shield - - 1 Case Case Case Case + 15 (5) PIN 1 with Pin 14 and Pin 2 with Pin 16 connected through solder bridge 1 5 6 2 7 4 3 8 6 5 1 9 91 8 15 14 1 1325 11 5 1 15 6 10 C1: RJ45 (8P8C) C2: M12 plug, (male) C3: D-SUB 9 (male) C4: D-SUB 15 (male) C5: D-SUB 25 (female) C6: D-SUB 15 HD (male) ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 4. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com IKS8-Rev1.0(2016/07/20) Optional Accessory – Order Codes for Linear Scales, 10 mm Width(6) Pole Pitch Accuracy A3 Accuracy A10 Accuracy A20 Accuracy A40 (standard) 0.5 KBEE10-0.5-A3K KBEE10-0.5-A10K KBEE10-0.5-A20K KBEE10-0.5-K 1 KBEE10-1-A3K KBEE10-1-A10K KBEE10-1-A20K KBEE10-1-K 2 KBEE10-2-A3K KBEE10-2-A10K KBEE10-2-A20K KBEE10-2-K 2.54 KBEE10-2.54-A3K KBEE10-2.54-A10K KBEE10-2.54-A20K KBEE10-2.54-K 5 KBEE10-5-A3K KBEE10-5-A10K KBEE10-5-A20K KBEE10-5-K (6) Scale dimensions: 10 mm x 1.3 mm (w/o cover tape), length up to 50 m. Other accuracies, other pole pitches, other scale widths and scales with reference track on request. See separate data sheet for linear scales for further possibilities. Optional Accessory –Rotary Scales See separate data sheet for rotary scales for further possibilities. 4/5 ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 5. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com IKS8-Rev1.0(2016/07/20) Order Code - Z P V D R F C L Parameter IKS8 Code (7) Explanation (7) Z Reference Signal Z1 periodic index signal from the pole pitch (standard) Z2 from reference marks (requires 2-track magnetic tape with incremental track and reference track) P Pole Pitch [mm] P0.5 0.5 mm (not interoperable with Z2) P1 1 mm P2 2 mm P2.54 2.54 mm P5 5 mm V Supply Voltage [V] V5 5 V V732 7...32 V D Interface D1 RS422 D2 Push-Pull HTL D3 Push-Pull TTL R Resolution(9) [μm] R0.25 Standard for pole pitch 0.5 mm R0.5 Standard for pole pitch 1 mm R1 Standard for pole pitch 2 mm R1.27 Standard for pole pitch 2.54 mm R2.5 Standard for pole pitch 5 mm R… Other non-standard resolutions, see section "Resolution and Speed" page 2 F Maximum Output Frequency [kHz] F3500 3500 kHz F1500 1500 kHz F1000 1000 kHz F500 500 kHz F50 50 kHz F10 10 kHz C Connector C1 RJ45 Plug C2 M12 plug (male) C3 D-SUB 9 (male) C4 D-SUB 15 (male) C5 D-SUB 25 (female) C6 D-SUB 15 HD (male) C99 Customer specific connector. L Cable Length [m] L1 1 m L2 2 m L3 3 m L… … m L6 6 m (7) standard parameters are bold 5/5 Ordering Example IKS8-Z1P2V5D1R1F1000C1L2 IKS8 Magnetic Sensing Head with periodic index signal, 2 mm pole pitch, voltage 5 V, interface RS422, 1 μm resolution, max. output frequency 1000 kHz, RJ45 conncetor, cable length 2 m IKS8-Z2P5V732D3R125F50C2L5 IKS8 Magnetic Sensing Head with reference signal from reference marks (2-track magnetic tape), 2 mm pole pitch, voltage 7 – 32 V (broad-range), interface Push-Pull TTL, 125 μm resolution, max. output frequency 50 kHz, M12 plug conncetor, cable length 5 m ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: