Bogen Technical Rotary Magnetic Scale Incremental
1 like106 views
The document discusses rotary magnetic scales for incremental measurement. It describes the features of rotary magnetic scales including their accuracy, magnetization, scale geometries, and customizability for applications. It also lists the available dimensions, materials, and properties of different rotary magnetic scale models.
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
RMSIRev2.0(2016/03/11)
Available Rotary Magnetic Scale Incremental Dimensions of figure 5+6
Order-
No.
Matchcode Numbers of Poles
Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H)
[mm] [mm] [mm] [mm]
51565 RMSI19.75-64-F 64 1 19,75 14,7 4,1
50536 RMSI19.75-32-F 32 2 19,75 14,7 4,1
51566 RMSI19.75-26-F 26 2,5 19,75 14,7 4,1
51560 RMSI21.3-28-F 28 2,5 21,3 14,7 4,1
51561 RMSI21.3-16-F 16 5 21,3 14,7 4,1
51585 RMSI24-76-F 76 1 24 5 3
51586 RMSI24-40-F 40 2 24 5 3
51587 RMSI24-32-F 32 2,5 24 5 3
51588 RMSI24-16-F 16 5 24 5 3
51578 RMSI24.3-78-F 78 1 24,3 20 4
51579 RMSI24.3-40-F 40 2 24,3 20 4
51108 RMSI24.3-32-F 32 2,5 24,3 20 4
51580 RMSI24.3-16-F 16 5 24,3 20 4
51581 RMSI24.5-80-F 80 1 24,5 17 6
51582 RMSI24.5-40-F 40 2 24,5 17 6
51583 RMSI24.5-32-F 32 2,5 24,5 17 6
51584 RMSI24.5-16-F 16 5 24,5 17 6
51589 RMSI30-96-F 96 1 30 11,5 5
51590 RMSI30-50-F 50 2 30 11,5 5
51591 RMSI30-40-F 40 2,5 30 11,5 5
51592 RMSI30-20-F 20 5 30 11,5 5
51593 RMSI30-96-F 96 1 30 11,5 2,5
51594 RMSI30-50-F 50 2 30 11,5 2,5
51595 RMSI30-40-F 40 2,5 30 11,5 2,5
51596 RMSI30-20-F 20 5 30 11,5 2,5
51559 RMSI30.9-100-F 100 1 30,9 21,3 5
50954 RMSI30.9-50-F 50 2 30,9 21,3 5
50357 RMSI30.9-40-F 40 2,5 30,9 21,3 5
50182 RMSI30.9-20-F 20 5 30,9 21,3 5
51568 RMSI31-100-F 100 1 31 24 10
50887 RMSI31-50-F 50 2 31 24 10
51569 RMSI31-40-F 40 2,5 31 24 10
50466 RMSI31-20-F 20 5 31 24 10
51562 RMSI32.21-102-F 102 1 32,21 25,5 10
51563 RMSI32.21-22-F 22 5 32,21 25,5 10
50365 RMSI38-120-F 120 1 38 30 6,5
50239 RMSI38-50-F 50 2,5 38 30 6,5
50204 RMSI38-24-F 24 5 38 30 6,5
51567 RMSI41.2-130-F 130 1 41,2 25,05 10
50592 RMSI41.2-64-F 64 2 41,2 25,05 10
51570 RMSI45-144-F 144 1 45 34 10
50888 RMSI45-72-F 72 2 45 34 10
51571 RMSI48-152-F 152 1 48 40 10
50437 RMSI48-32-F 32 5 48 40 10
51572 RMSI48.3-154-F 154 1 48,3 36,6 10
51573 RMSI48.3-80-F 80 2 48,3 36,6 10
50828 RMSI48.3-36-F 32 5 48,3 36,6 10
51564 RMSI48.7-156-F 156 1 48,7 37,2 5
50666 RMSI48.7-64-F 64 2,5 48,7 37,2 5
50232 RMSI48.7-32-F 32 5 48,7 37,2 5
51574 RMSI54.7-172-F 172 1 54,7 41,6 10
50889 RMSI54.7-36-F 36 5 54,7 41,6 10
51575 RMSI62.6-198-F 198 1 62,6 52,6 10
50699 RMSI62.6-100-F 100 2 62,6 52,6 10
FerriteRings(Radial,fig.6)
4/6
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetrmsirev20-170428191721/85/Bogen-Technical-Rotary-Magnetic-Scale-Incremental-4-320.jpg)
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
RMSIRev2.0(2016/03/11)
Order-No. Matchcode
Numbers
of poles
Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H)
[mm] [mm] [mm] [mm]
51576 RMSI62.6-80-F 80 2,5 62,6 52,6 10
51577 RMSI62.6-40-F 40 5 62,6 52,6 10
50460 RMSI72-228-F 228 1 72 54 7
50240 RMSI72-88-F 88 2,5 72 54 7
Order-No. Matchcode
Numbers
of poles
Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H)
[mm] [mm] [mm] [mm]
51598 RMSI14-20A-F 20 2 14 8 1,5
51599 RMSI14-16A-F 16 2,5 14 8 1,5
51600 RMSI14-10A-F 10 5 14 8 1,5
51604 RMSI19.75-20A-F 20 2,5 19,75 14,7 4,1
51605 RMSI19.75-10A-F 10 5 19,75 14,7 4,1
51618 RMSI24-24A-F 24 2 24 5 3
51619 RMSI24-20A-F 20 2,5 24 5 3
51620 RMSI24-10A-F 10 5 24 5 3
51616 RMSI24.3-16A-F 16 5 24,3 20 4
51617 RMSI24.5-16A-F 16 5 24,5 17 6
51621 RMSI30-16A-F 16 5 30 11,5 5
51622 RMSI30-28A-F 28 1 30 11,5 2,5
51623 RMSI30-16A-F 16 1 30 11,5 2,5
51597 RMSI30.9-18A-F 18 5 30,9 21,3 5
51612 RMSI31-20A-F 20 5 31 24 10
51601 RMSI32.21-20A-F 20 5 32,21 25,5 10
51610 RMSI38-108A-F 108 1 38 30 6,5
50614 RMSI38-54A-F 54 2 38 30 6,5
51611 RMSI38-44A-F 44 2,5 38 30 6,5
51613 RMSI45-50A-F 50 2,5 45 34 10
51614 RMSI48-30A-F 30 5 48 40 10
51602 RMSI48.7-70A-F 70 2 48,7 37,2 5
51603 RMSI48.7-30A-F 30 5 48,7 37,2 5
51615 RMSI54.7-32A-F 32 5 54,7 41,6 10
51606 RMSI72-200A-F 200 1 72 54 7
51607 RMSI72-100A-F 100 2 72 54 7
51608 RMSI72-80A-F 80 2,5 72 54 7
51609 RMSI72-40A-F 40 5 72 54 7
50748 RMSI72-38A-F 38 5 72 54 7
FerriteRings(Axial,fig.5)
Customized Rotary Magnetic Scale Incremental
Customized rotary magnetic scales with different dimensions and pole numbers can be produced economically.
BOGEN scale production capabilities are designed for high flexibility at low cost. Please contact BOGEN to discuss your requirements.
5/6
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetrmsirev20-170428191721/85/Bogen-Technical-Rotary-Magnetic-Scale-Incremental-5-320.jpg)
![Magnetics that count
BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany
Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com
RMSIRev2.0(2016/03/11)
Ordering Example
RMSI50-64-F-A-G100
Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magne-
tization radial, magnetization material hard ferrite, hub material aluminum, accuracy class 100 arc
seconds
RMSI50-64A-E-S-G100-F-Z
Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magneti-
zation axial, magnetization material elastomer bonded ferrite, hub material steel, accuracy class 100
arc seconds, protection fibre, index north-south-north
Order Code
D - N S - M - H - G - P - I
Parameters
RMSI
Code Explanation*
D Outer Diameter [mm] Outer diameter of ring surface in millimeter
N Number of Poles Even positive integer number
S Surface of Magnetization
Radial (default)
A Axial
M Magnetization Material
F Hard ferrite (8/22)
E Elastomer bonded ferrite
V Vulcanized ferrite
P Plastoferrite
H Hub Material
A Aluminum
S Steel
M Sheet metal
G Accuracy Class
600 Arc seconds (default)
G... (Only necessary if deviates from default)
P Protection
Without protection (default)
S Stainless steel
F Fibre
P Plastic
I Index
Without reference mark (default)
Z North-south-north reference mark
Parammeters
6/6
(*)
standard parameters are bold
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/bogentechnicaldatasheetrmsirev20-170428191721/85/Bogen-Technical-Rotary-Magnetic-Scale-Incremental-6-320.jpg)
Bogen Technical Rotary Magnetic Scale Incremental
- 1. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Indicating movements with the RMSI – axial and rotary RMSI Rotary Magnetic Scale Incremental - Rotational applications - Different ring materials available - Different pattern configurations Counting Controlling 1/6 Features • From low to very high accuracy producible on demand • One or two track magnetization • Several pole pitches • Different scale geometries • Customizable for many applications • No wear from usage • Resistant to dust, cooling lubricant emulsion, oil, etc. • Wide range of selectable magnetic scale characteristics • A variety of magnetic materials for several applications Rotary scales can be adapted to many different requirements. The standard program covers many applications. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 2. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Features Magnetic Properties (elastomer bonded ferrite/isotropic) Residual induction (Br) mT 240-260 Coercive force (Hcb) kA/m 171-195 Intrinsic coercive force (Hcj) kA/m 223-279 Maximum energy product (Bhmax) MGOe 1.45-1.65 Reversing temperature modulus % / °C -0.18 Physical Properties Tensile strength N/mm²(MPa) >2.5 Hardness shore D 30-45 Density g/cm³ 3.55-3.7 Temperature range °C -40 to 100 Chemical Properties Hydraulic oil (23°C×72h) ++ Alcohol (23°C×72h) + Weak alkali (23°C×72h) ++ Detergent (23°C×72h) ++ Aromatic solvent (23°C×72h) - Organic, anorganic acid (23°C×72h) - Aliphatic solvent (23°C×72h) - Water (60°C×72h) + Magnetic Properties (Hard ferrite/Isotropic) Residual induction (Br) mT 200-220 Coercive force (Hcb) kA/m 135-140 Intrinsic coercive force (Hcj) kA/m 220-230 Maximum energy product (Bhmax) MGOe 1.45-1.65 Reversing temperature modulus % / °C -0.19 Physical Properties Tensile strength N/mm²(MPa) 50 Hardness HV 500-600 Density g/cm³ 4.8-4.9 Temperature range °C -40 °C to 250 °C Chemical Properties Hydraulic oil (23°C×72h) ++ Alcohol (23°C×72h) + Weak alkali (23°C×72h) ++ Detergent (23°C×72h) ++ Aromativ solvent (23°C×72h) Chemical resistance depends on temperature, concentration and time of exposure to the medium Organic, anorganic acid (23°C×72h) Aliphatic solvent (23°C×72h) Water (60°C×72h) ++ Magnetic Properties (Vulcanized ferrite/Isotropic) Residual induction (Br) mT 185 Coercive force (Hcb) kA/m 129 Intrinsic coercive force (Hcj) kA/m 257 Physical Properties Hardness shore A 85 ± 3 Density g/cm³ 4.13 Temperature range °C -40 to 160 Chemical Properties Hydraulic oil (23°C×72h) +++ Alcohol (23°C×72h) ++ Weak alkali (23°C×72h) +++ Detergent (23°C×72h) +++ Aromatic solvent (23°C×72h) - Organic, anorganic acid (23°C×72h) - Aliphatic solvent (23°C×72h) - Water (60°C×72h) +++ 2/6 - not suitabel + good ++ very good - not suitabel + good ++ very good - not suitabel + good ++ very good ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 3. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Technical Drawing 3/6 hard ferrite H ID ODhard ferrite on hub H H2 ID OD ID2 OD2 elastomer bonded ferrite on hub H H2 ID2 OD vulcanized ferrite on hub H ID2 OD hard ferrite on hub H H2 OD ID OD2 ID2 elastomer bonded ferrite on hub H2 OD ID OD2 ID2 Incremental Track hard ferrite H ID OD Incremental Track D1 (IncrementalTrack) D1 (IncrementalTrack) D1 (IncrementalTrack) Incremental Track Incremental Track H ID OD H H2 ID OD ID2 OD2 H H2 ID2 OD H ID2 OD hard ferrite on hub H H2 OD ID OD2 ID2 elastomer bonded ferrite on hub H2 OD ID OD2 ID2 Incremental Track hard ferrite H ID OD Incremental Track D1 (IncrementalTrack) D1 (IncrementalTrack) D1 (IncrementalTrack) Incremental Track Incremental Track ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 4. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Available Rotary Magnetic Scale Incremental Dimensions of figure 5+6 Order- No. Matchcode Numbers of Poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] 51565 RMSI19.75-64-F 64 1 19,75 14,7 4,1 50536 RMSI19.75-32-F 32 2 19,75 14,7 4,1 51566 RMSI19.75-26-F 26 2,5 19,75 14,7 4,1 51560 RMSI21.3-28-F 28 2,5 21,3 14,7 4,1 51561 RMSI21.3-16-F 16 5 21,3 14,7 4,1 51585 RMSI24-76-F 76 1 24 5 3 51586 RMSI24-40-F 40 2 24 5 3 51587 RMSI24-32-F 32 2,5 24 5 3 51588 RMSI24-16-F 16 5 24 5 3 51578 RMSI24.3-78-F 78 1 24,3 20 4 51579 RMSI24.3-40-F 40 2 24,3 20 4 51108 RMSI24.3-32-F 32 2,5 24,3 20 4 51580 RMSI24.3-16-F 16 5 24,3 20 4 51581 RMSI24.5-80-F 80 1 24,5 17 6 51582 RMSI24.5-40-F 40 2 24,5 17 6 51583 RMSI24.5-32-F 32 2,5 24,5 17 6 51584 RMSI24.5-16-F 16 5 24,5 17 6 51589 RMSI30-96-F 96 1 30 11,5 5 51590 RMSI30-50-F 50 2 30 11,5 5 51591 RMSI30-40-F 40 2,5 30 11,5 5 51592 RMSI30-20-F 20 5 30 11,5 5 51593 RMSI30-96-F 96 1 30 11,5 2,5 51594 RMSI30-50-F 50 2 30 11,5 2,5 51595 RMSI30-40-F 40 2,5 30 11,5 2,5 51596 RMSI30-20-F 20 5 30 11,5 2,5 51559 RMSI30.9-100-F 100 1 30,9 21,3 5 50954 RMSI30.9-50-F 50 2 30,9 21,3 5 50357 RMSI30.9-40-F 40 2,5 30,9 21,3 5 50182 RMSI30.9-20-F 20 5 30,9 21,3 5 51568 RMSI31-100-F 100 1 31 24 10 50887 RMSI31-50-F 50 2 31 24 10 51569 RMSI31-40-F 40 2,5 31 24 10 50466 RMSI31-20-F 20 5 31 24 10 51562 RMSI32.21-102-F 102 1 32,21 25,5 10 51563 RMSI32.21-22-F 22 5 32,21 25,5 10 50365 RMSI38-120-F 120 1 38 30 6,5 50239 RMSI38-50-F 50 2,5 38 30 6,5 50204 RMSI38-24-F 24 5 38 30 6,5 51567 RMSI41.2-130-F 130 1 41,2 25,05 10 50592 RMSI41.2-64-F 64 2 41,2 25,05 10 51570 RMSI45-144-F 144 1 45 34 10 50888 RMSI45-72-F 72 2 45 34 10 51571 RMSI48-152-F 152 1 48 40 10 50437 RMSI48-32-F 32 5 48 40 10 51572 RMSI48.3-154-F 154 1 48,3 36,6 10 51573 RMSI48.3-80-F 80 2 48,3 36,6 10 50828 RMSI48.3-36-F 32 5 48,3 36,6 10 51564 RMSI48.7-156-F 156 1 48,7 37,2 5 50666 RMSI48.7-64-F 64 2,5 48,7 37,2 5 50232 RMSI48.7-32-F 32 5 48,7 37,2 5 51574 RMSI54.7-172-F 172 1 54,7 41,6 10 50889 RMSI54.7-36-F 36 5 54,7 41,6 10 51575 RMSI62.6-198-F 198 1 62,6 52,6 10 50699 RMSI62.6-100-F 100 2 62,6 52,6 10 FerriteRings(Radial,fig.6) 4/6 ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 5. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Order-No. Matchcode Numbers of poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] 51576 RMSI62.6-80-F 80 2,5 62,6 52,6 10 51577 RMSI62.6-40-F 40 5 62,6 52,6 10 50460 RMSI72-228-F 228 1 72 54 7 50240 RMSI72-88-F 88 2,5 72 54 7 Order-No. Matchcode Numbers of poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] 51598 RMSI14-20A-F 20 2 14 8 1,5 51599 RMSI14-16A-F 16 2,5 14 8 1,5 51600 RMSI14-10A-F 10 5 14 8 1,5 51604 RMSI19.75-20A-F 20 2,5 19,75 14,7 4,1 51605 RMSI19.75-10A-F 10 5 19,75 14,7 4,1 51618 RMSI24-24A-F 24 2 24 5 3 51619 RMSI24-20A-F 20 2,5 24 5 3 51620 RMSI24-10A-F 10 5 24 5 3 51616 RMSI24.3-16A-F 16 5 24,3 20 4 51617 RMSI24.5-16A-F 16 5 24,5 17 6 51621 RMSI30-16A-F 16 5 30 11,5 5 51622 RMSI30-28A-F 28 1 30 11,5 2,5 51623 RMSI30-16A-F 16 1 30 11,5 2,5 51597 RMSI30.9-18A-F 18 5 30,9 21,3 5 51612 RMSI31-20A-F 20 5 31 24 10 51601 RMSI32.21-20A-F 20 5 32,21 25,5 10 51610 RMSI38-108A-F 108 1 38 30 6,5 50614 RMSI38-54A-F 54 2 38 30 6,5 51611 RMSI38-44A-F 44 2,5 38 30 6,5 51613 RMSI45-50A-F 50 2,5 45 34 10 51614 RMSI48-30A-F 30 5 48 40 10 51602 RMSI48.7-70A-F 70 2 48,7 37,2 5 51603 RMSI48.7-30A-F 30 5 48,7 37,2 5 51615 RMSI54.7-32A-F 32 5 54,7 41,6 10 51606 RMSI72-200A-F 200 1 72 54 7 51607 RMSI72-100A-F 100 2 72 54 7 51608 RMSI72-80A-F 80 2,5 72 54 7 51609 RMSI72-40A-F 40 5 72 54 7 50748 RMSI72-38A-F 38 5 72 54 7 FerriteRings(Axial,fig.5) Customized Rotary Magnetic Scale Incremental Customized rotary magnetic scales with different dimensions and pole numbers can be produced economically. BOGEN scale production capabilities are designed for high flexibility at low cost. Please contact BOGEN to discuss your requirements. 5/6 ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 6. Magnetics that count BOGEN Electronic GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0)30 81 00 02-0 · Fax +49 (0)30 81 00 02-60 · magnetics@bogen-electronic.com · www.bogen-electronic.com RMSIRev2.0(2016/03/11) Ordering Example RMSI50-64-F-A-G100 Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magne- tization radial, magnetization material hard ferrite, hub material aluminum, accuracy class 100 arc seconds RMSI50-64A-E-S-G100-F-Z Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magneti- zation axial, magnetization material elastomer bonded ferrite, hub material steel, accuracy class 100 arc seconds, protection fibre, index north-south-north Order Code D - N S - M - H - G - P - I Parameters RMSI Code Explanation* D Outer Diameter [mm] Outer diameter of ring surface in millimeter N Number of Poles Even positive integer number S Surface of Magnetization Radial (default) A Axial M Magnetization Material F Hard ferrite (8/22) E Elastomer bonded ferrite V Vulcanized ferrite P Plastoferrite H Hub Material A Aluminum S Steel M Sheet metal G Accuracy Class 600 Arc seconds (default) G... (Only necessary if deviates from default) P Protection Without protection (default) S Stainless steel F Fibre P Plastic I Index Without reference mark (default) Z North-south-north reference mark Parammeters 6/6 (*) standard parameters are bold ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: