BS607_BITS_BROCHURE_V4
- 1. Welding Training Inspection Boost your welding capabilities with our inspection and welding expertise.
- 2. Welding inspection and training services We take a holistic attitude to the welded product and offer a complete range of services in fabrication, supervision, training, and all activities associated with welding, covering development of welding procedures, testing and inspection. Our highly specialised services also include technical and specialist advice on supervision of steel fabrication and welding, The Welding Procedure Qualification Record (WPQR) is the development and documentation of the welding procedure for a desired product. A weld is produced and is thoroughly tested to requirements of standards/ codes to ensure a sound weld is produced. Welding Procedure Specification (WPS) is documented after a successful WPQR is completed and provides directions for the welder, specifying the range of conditions for producing good quality welds as per the standard/code requirements. These steps are undertaken in compliance with international and Australian standards and codes, such as AS/NZS 3992, AS/NZS 1554, AS 2885.2, AS 1210, AS 1228, AS/ NZS 1665, AS 4041, ASME IX, API 620/650 and AWS D1.1/D1.1M, EN ISO 15614-1, ISO 15609-1, and others. Welder Performance Qualification (WPQ). Tests for welders and operators are performed to demonstrate their ability to work within the specified WPS. The WPQ is undertaken according to AS/NZS 2980, as well as all the above standards/codes. Our personnel are highly qualified in conducting both training and inspection. We are qualified and certificated as: • Workplace Trainers and Assessors from Australian Registered Training Organisations (RTO’S) – with Certificate IV in Training and Assessment - (TAE 40110) • Certificates in Welding Technology and Industrial Supervision • Australian (NSW) Certificate III Fabrication Trade and Diploma of Engineering— Advanced Trade Levels (MEM50105) • Australian (NSW) Advanced Diploma of Management • AS/NZS 2214- Certification of Welding Supervisors—Structural Steel Welding • AS 1796-Certification of Welders, Welding Supervisors Certificate 10 • AS 1796-Certification of Welders in 1/1E, 2, 3/3E, 4, 5, 6, 7, 8G, 8F and 9 (Pressure Welding) • Welding Inspection qualifications to International Institute of Welding levels IWI-B and IWI-S • Welding Technology Institute of Australia (WTIA)— Welding Inspection certifications to CWI, CSWI levels • WTIA Certified Pressure Equipment Welding Supervisors (CPEWS) Certified Structural steel Welding Supervisors(CSSWS) • Responsible Welding Coordinator to International Institute Welding–IWS (Specialist) level. We train and test welders to Australian Standards, such as AS/NZS 1554, AS 1796, AS/NZS 1665, AS/ NZS 2980, AS/NZS 3992, and other relevant codes. Training/Testing can be held at your company premises or at our Kingsgrove Training and Testing Facility. Products that require 3rd party visual inspection can be referred to Busicom Inspections and Training Solutions (BITS) Inspectors. The Quality Assurance (QA) system may include an Inspection and Test Plan (ITP). The ITP is aimed at showing that the product meets expectations through a series of steps to follow throughout the manufacturing process, from receipt of the job specifications to the final inspection. Our services cover the ITP and its implementation. We also provide: • On-site specialist welding assessments, • Supervision and welding inspections, and • Third party visual Inspection of fabrication and welding and reports as per AS 3978 standard and other inspection standards/codes/specifications. We also provide third party inspection/witnessing and pressure test reports as per AS 4037. • NATA-approved testing facilities can be arranged for Non- Destructive (NDT) or Mechanical/Destructive (DT) testing of welds and metals to various standards/codes/ specifications. “Seven welding bays fully equipped for gas tungsten arc welding (GTAW), manual metal arc welding (MMAW), gas metal arc welding/ flux-cored arc welding (GMAW/FCAW) processes”.
- 3. www.busicomsolutions.com.au P 02 9503 2666 or 1800 BUSICOM (287 426) F 02 9503 2611 E info@busicomsolutions.com.au A Unit 18, 20-22 St Albans Rd, Kingsgrove NSW 2208