Bulk flow petchem container liners1
0 likes182 views
The document describes several types of bulk container liners produced by BARLESS. The BARLESS liners eliminate the need for costly steel bars, saving on logistical and safety costs. They are the safest liners that are strong enough to discharge without steel bars but bars can be added for redundancy. The liners do not reduce payload volume and install quickly. Woven liners eliminate risks from stitching or threads and have high lamination thickness for humidity protection. PE film liners have higher thickness, no external welded seams, and the option to use 4-5 steel bars. They also have a heavy duty bulkhead and proprietary fluidizing system to access discharge ports. All materials are food grade and facilities are clean
Bulk flow petchem container liners1
- 1. BARLESS High Performance Bulk Container Liners www.bulk-flow.com www.bulk-flow.com • Eliminates costly steel bars. • Saves on the Logistical operational costs of having to import the steel bars. • No risk of steel bar injury by coming out of the container under the load pressure. • Safest liner-bag in the industry: Liner strong enough to discharge without steel bars, but if desired, for safety redundancy purposes, Steel Bars can be added in the container channel slots at destination prior to tilting. • No loss of payload due to its proprietary design that does not reduce liner-bag volume. • Installs in 8-10 mins with no additional belts or straps to tie.
- 2. Woven High Performance Container Bulk Liners • Proprietary manufacturing system with these benefits: 1. Eliminates the risk of spills due tobroken seams with faulty stitching. 2. Eliminates the risk of contamination from loose threads due to stitching. 3. Humidity cannot penetrate through the seams • Highest lamination thickness in the industry for additional humidity protection (30 gsm/1oz per yd2) • Due to the strength of proprietary clips attached to the liner’s floor end, each liner comes with the possibility of using a rope or a steel bar on the front floor end. Potential saving of 1 steel bar. • Fast installation with elastic cords and metal carabine hooks. • Pull-up top steel bar in the bulkhead guarantees discharge ports fully accessible at all times. • High quality non-stretchable belts ensures bulkhead and steel bars position at all times. • Made of FDA food grade virgin HDPE resins at clean facility. www.bulk-flow.com www.bulk-flow.com
- 3. PE FILM High Performance Container Liners • HIGHER THICKNESS: BULK-FLOW standard Film thicknessis 140 microns.Due to the high tolerancesin films, 120 microns PE films pose the risk of weak spots beyond acceptablefilm strength tolerances. • NO EXTERNAL WELDED SEAMS: BULK-FLOW PE film Body Liner tube is made longer so it can be folded at the end and avoid any type of long external welded seams that are the weak point of the Liner. The only welded seam is a single point where all the folded tabsmeet and it is inside of the Liner. • OPTION TO USE 4 OR 5 STEEL BARS: Due to the strength of proprietary clips attached to the liner’s floor end, each liner comes with the possibility of using a rope or a steel bar on the front floor end. Potential saving of 1 steel bar. • HEAVY DUTY BULKHEAD: Unique design that uses a longer tube to be folded on the ends and avoid long welded seams. The outer Woven Bulkhead is also made of folded Woven HDPE with a total thickness of 280 gsm (9oz/yd2)Fast installation with elastic cords and metal carabinehooks. • PROPRIETARY FULL FLOOR FLUIDIZING SYSTEM (OPTIONAL): Built- in fluidizing system for hard-to-flowproducts • GUARANTEED FULL ACCESS TO DISCHARGE PORTS: • Pull-up top steel bar in the bulkhead guarantees discharge ports fully accessible at all times. • High quality non-stretchable belts ensures bulkhead and steel bars position at all times. • HIGH QUALITY MATERIALS: Made of virgin HDPE resin with extraordinaryelasticity and FDA compliant. www.bulk-flow.com www.bulk-flow.com