![L1000
Log TiteTM
Foam
Designed to meet the extreme demands of the log home industry, Log TiteTM Foam
makes a permanent weather-tight seal while eliminating concern over "log float"
during construction. Available in thicknesses of .375" (9.5mm) and .500" (12.7mm).
•
Economical
•
Closed-cell PVC provides air and water tight weather seal
•
Soft and easy to compress
•
Exceptional resiliency
•
Near 100% recovery after extended compression
Heavy density foam which has many general industrial applications. It is highly
conformable, exhibits excellent elongation properties and can be used as a
component part of medical devices. Available in thicknesses from .031" to .250"
(.8mm to 6.4mm) and widths from .500" to 57" (12.7mm to 1448mm). Other densities
available.
MC2000
EP900
C1000
CP1000
Cling Foam™
Spacer
Materials
PASSES MEDICAL USE TESTING:
•
Acute dermal toxicity—Foam rated as non-toxic
•
Primary skin irritation—Foam tested as non-irritating
•
Pyrogen test—Foam tested non-reactive
•
Moisture vapor transmission (MVTR) 300 grams/M2
•
Homolysis—Non-reactive
Closed-cell polyvinyl chloride foam. Typical benefits and features include:
•
Slow recovery foam
•
Flexes to protect irregular surfaces
•
Can be made in a variety of colors
•
Previous testing of a high quality, die cut part resulted in an average
NRR rating of 31.3 when measured from .125 to 8000 Hertz (five
subjects, average of nine hertz readings [Mean–2 ti2 ti2 times Standard
Deviation])
The Gaska Tape line of spacer materials offers a choice of materials depending upon
the requirements of the application. All incorporate our Cling Foam which sticks to
non-porous surfaces without adhesive. Tell us your load and temperature parameters
and we will recommend the right spacer for you.
Produced in .063" (1.6mm) thickness. Available in overall .125", .188" and .250" (3.2,
4.8 and 6.4mm) thickness laminations with polyethylene, VK and cork.
CP1000 is a plastics compatible formulation which, when laminated to VK, E4 or cork
will not crack, craze or mar synthetic plastic surfaces.
GaskeTech
105-190 Mills Road - Kelowna, BC V1X 4G7 Canada
Phone: 1 877 762 7325 Fax: (250) 762 9656
info@gasketech.com
© 2004 All Rights Reserved](https://image.slidesharecdn.com/gasketech-131130041805-phpapp02/85/Gaske-tech-6-320.jpg)
Gaske tech
- 1. GaskeTech - Sealing Tomorrow’s Technology 2004 Catalogue GaskeTech © 2004 All Rights Reserved
- 2. G A S K A T A P E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 THE POLYMERIC SERIES.............................................................................................................................................. 3 THE VINYL SERIES FOAM ............................................................................................................................................. 4 A U T O M O T I V E M O U L D I N G S . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ACCESSORIES ............................................................................................................................................................... 8 DRIP RAIL MOLDING...................................................................................................................................................... 8 TRUCK RAIL GUARD ..................................................................................................................................................... 8 GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 3. G A S K A T A P E THE POLYMERIC SERIES Product line comprises an all new, patented line of closed cell foam and tapes for Gaska Tape Inc. This series can be considered for more sophisticated industrial, automotive and construction applications. Revolutionary in composition, these products compete favorably with high end rubbers such as EPDM, Nitrile, SBR Blends, ECH, EPT and (depending upon the application) heavy density urethane. A few key features include: no out gassing at ambient temperature, temperature limits from –40 degrees F. up to 250 degrees F. continuous, does not become brittle or exhibit loss of properties over time, is chemical, UV, and oxidation resistant. For details on the properties of this product series and available adhesive packages go to Properties and Adhesives. Series Specification/Description PS800 This special formulation is a light density Polymeric Series foam that is easily flexed and compressed and exhibits excellent conformability. Test results demonstrate that PS800 can be classified to SAEJ182CO (SCE 40) as specified by ASTM 1056. Available thickness range from .079" to .750" (2.0mm to 19.0mm) and widths from .250" to 57" (6.4mm to 1448mm). PS1100 This moderate density foam exhibits good conformability with excellent dimensional stability. Test results demonstrate that PS1100 can be classified to SAEJ182C1 (SCE 41) as specified by ASTM 1056. Available thickness range from .063" to .500" (1.6mm to 12.7mm) and widths from .250" to 57" (6.4mm to 1448mm). PS1500 This heavier density foam exhibits greater dimensional stability, cushioning properties and vibration dampening qualities. Test results demonstrate that PS1500 can be classified to SAEJ182C2 (SCE 42) as specified by ASTM 1056. This series competes with heavy density urethane in some applications. Available thickness range from .063" to .375" (1.6mm to 9.5mm) and widths from .250" to 57" (6.4mm to 1448mm). PS2500 This heavy density Polymeric Series exhibits superior physical properties, abrasion resistance, as well as vibration reduction. Sound deadening and cushioning characteristics are also enhanced. This series competes with heavy density urethane. Test results demonstrate that PS2500 can be classified to SAEJ182C3/B3 (SCE/SBE 43) as specified by ASTM 1056. Available thickness range from .031" to .250" (.8mm to 6.4mm) and widths from .250" to 57" (6.4mm to 1448mm). GaskeTech 105-190 Mills Road Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 4. THE VINYL SERIES FOAM Gaska Tape's V Series foam tapes are closed cell in structure and completely seal out air, moisture, light and dust when compressed at least 30%. Formulated from durable Polyvinyl Chloride (PVC) for a long service life, these products cushion against shock and vibration, and insulate against temperature and sound. This product line is not only ultraviolet resistant, but also resists most chemicals, acids and bases making this series the optimum choice for long-term durability. Series SO500 Specification/Description Ultrasoft, semi-open cell Polyvinyl Chloride foam that can be produced with or without adhesive on one side. SO500 is formulated for applications which require a product with a very low force to compress. Available in thicknesses of .118" to 1.00" (3.0mm to 25.4mm) and widths of 1.0" to 57" (25.4mm to 1448mm). This product meets the Federal Motor Vehicle Safety Standard (FMVSS) 302A. • Excellent for filling large voids and variable gaps • Seals out air, condensation, light and dust when compressed V610/615 CAP TAPE Cap Tape Developed initially to provide an economical seal between pickup truck caps and body side rails. Today, Cap Tape is used effectively for a variety of noncritical sealing applications. Available in thicknesses of .188" to .250" (4.8mm to 6.4mm) and widths of 1.0" to 57" (25.4mm to 1448mm). V612 Vyn-Alum Produced by manufacturing a layer of vinyl foam on heavy duty aluminum foil. Vyn-Alum acts as an effective insulator and prevents condensation or moisture buildup on surfaces to which it is applied. Available in .125" to .250" (3.2mm to 6.4mm) thickness and widths of 1" to 57" (25.4mm to 1448mm). • Conforms to fit tight bends and corners • Flexes to fill-in and seal irregular surfaces • Reduces vibration and deadens sound in HVAC applications • Available in a special formulation (V612–FR) FR) FR) that meets • Building Materials Specification FHC 25/50 flame and smoke spread index (UL 723) LC700 Low Compression An excellent alternative to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress. Available in thicknesses of .079" to .787" (2.0mm to 20mm) (LC715 .125" to .500") (3.2mm to 12.7mm) and widths of .250" to 57" (6.4mm to 1448mm). • Available with G3 adhesive, specifically designed to adhere to galvanized metals • Can be die or kiss cut. Available with foam laminated to polyester film with adhesive and release board • LC715 is cast on polyester film • Conforms to Chrysler MS AY510–A, BA, BA, B and C and Ford WSB– M3G–102B GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 5. V700/800 Light Density Vinyl These economical, general purpose foam tapes are manufactured for use in applications requiring positive seals on irregular surfaces or when flex and conformability to seal tight radius curves are critical considerations. Available in thicknesses of .079" to .787" (2mm to 20mm) (V715 & V815 .125" to 500" (3.2mm to 12.7mm) and widths of .250" to 57" (6.4mm to 1448mm). • Low density foam is easy to compress and conformable but is still strong and resilient • Available with a tough polyester film on the exposed surface • V710 is specifically formulated to meet automotive industry specifications: General Motors 6086M–1A, 1A, 1A, Ford ESB M3G 102– A, Chrysler MSAY 511–A, B and C • V710 displaces neoprene in many applications • V710 is a self-extinguishing formulation and meets FMVSS 302A V1100/1500 Medium Density Vinyl Excellent combination of flexibility and conformability with strength and wear resistance. Performs in those "tough duty" applications where a tape must still flex to fit and seal. Available in thicknesses of .063" to .500" (1.6mm to 12.7mm) and widths of .250" to 57" (6.4mm to 1448mm). • Excellent dimensional stability and a cushion against heavier loads • Foam density permits clean die cuts and fastener penetration • Withstands wear and abrasion • Available on polyester film V2500 Heavy Density Vinyl Designed for use in the most demanding of foam sealing or cushioning applications. High internal strength resists pressure from outside forces and high hardness resists deterioration. Available in thicknesses of .031" to .250" (.8mm to 6.4mm) and widths of .250" to 57" (6.4mm to 1448mm). V1520 Double Faced Vinyl Glazing Tape VK 1800 and VK 2500 Series Spacer Tape Fire Retardant F Series Aggressive, pressure-sensitive adhesive on both sides of medium density foam. These tapes provide an excellent combination of light density flexibility with heavy density strength. Available with a clear easy-release polyethylene film liner (V1526). Tested and approved to AAMA 810.1–92 e92 e92 expanded cellular glazing tapes. Available in thicknesses of .063" to .500" (1.6mm to 12.7mm) and widths of .250" 57" (6.4mm to 1448mm). • Excellent in glazing applications • Maintains a seal in high movement joints • Effectively functions as a thermal break and insulator • Available with high performance S3 adhesive for temporary load bearing assembly requirements Perfect option for window installations and curtain wall structural silicone applications. • Resilient weather seal • Compatible with most chemical cured silicone sealants • Gaska VK Series Spacer has a six-month shelf life on Solvent Adhesives. • A patented heavy density vinyl foam coated with S3 solvent-based acrylic pressure sensitive adhesive on two-sides • Used as a spacer in curtain wall structural silicone applications and a wide variety of other uses that previously relied on costly high density urethane gasketing for spacing, vibration dampening or cushioning Available on a quotation basis only. This self-extinguishing formulation conforms to UL 94 requirements. Gray is the standard recognized component color. • Available in a range of densities of 6 to 40 pounds per cubic foot. • Available in a variety of colors • UL material designation code is FRXXPV (where the XX is replaced by the foam density) file #58620 GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 6. L1000 Log TiteTM Foam Designed to meet the extreme demands of the log home industry, Log TiteTM Foam makes a permanent weather-tight seal while eliminating concern over "log float" during construction. Available in thicknesses of .375" (9.5mm) and .500" (12.7mm). • Economical • Closed-cell PVC provides air and water tight weather seal • Soft and easy to compress • Exceptional resiliency • Near 100% recovery after extended compression Heavy density foam which has many general industrial applications. It is highly conformable, exhibits excellent elongation properties and can be used as a component part of medical devices. Available in thicknesses from .031" to .250" (.8mm to 6.4mm) and widths from .500" to 57" (12.7mm to 1448mm). Other densities available. MC2000 EP900 C1000 CP1000 Cling Foam™ Spacer Materials PASSES MEDICAL USE TESTING: • Acute dermal toxicity—Foam rated as non-toxic • Primary skin irritation—Foam tested as non-irritating • Pyrogen test—Foam tested non-reactive • Moisture vapor transmission (MVTR) 300 grams/M2 • Homolysis—Non-reactive Closed-cell polyvinyl chloride foam. Typical benefits and features include: • Slow recovery foam • Flexes to protect irregular surfaces • Can be made in a variety of colors • Previous testing of a high quality, die cut part resulted in an average NRR rating of 31.3 when measured from .125 to 8000 Hertz (five subjects, average of nine hertz readings [Mean–2 ti2 ti2 times Standard Deviation]) The Gaska Tape line of spacer materials offers a choice of materials depending upon the requirements of the application. All incorporate our Cling Foam which sticks to non-porous surfaces without adhesive. Tell us your load and temperature parameters and we will recommend the right spacer for you. Produced in .063" (1.6mm) thickness. Available in overall .125", .188" and .250" (3.2, 4.8 and 6.4mm) thickness laminations with polyethylene, VK and cork. CP1000 is a plastics compatible formulation which, when laminated to VK, E4 or cork will not crack, craze or mar synthetic plastic surfaces. GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 7. Polyethylene These tapes are produced from tough 2# (32 kg/m3) density, cross linked polyethylene foams. The fine, closed cell composition provides high strength, a smooth surface and excellent compression recovery properties. Available in thicknesses from .125" to .250" (3.2mm to 6.4mm) and widths of .250" to 54" (6.4mm to 1372mm). E200 Series: • Completely seals out air, moisture, light and dust when compressed at least 30% • Fine cell structure permits easy fastener penetration E200/U210 Release Liners Brown Industrial Grade U210 Series: Produced from open cell, 1.5# (24kg/m3) density ether formulation polyurethane foam. The foam is permanently laminated to a 3/4 mil (.02mm) polypropylene film which acts as the carrier for an aggressive pressure sensitive adhesive. Available in thicknesses of .125" to .750" (3.2mm to 19mm) and widths of .250" to 56" (6.4mm to 1422mm). • Acts as a cost effective dust and insect filter • An excellent choice for light duty cushioning or vibration dampening applications • Compresses easily with outstanding recovery properties • Available with 1 mil polyester film carrier Gaska Tape Brown Industrial Grade Papers are manufactured using 84# polycoated Kraft paper. The polycoating process gives this paper excellent dimensional stability (the paper won't curl when exposed to moisture). Silicone release is coated on top of the plastic coating. Three choices of this release are available to fit your specific application and/or equipment needs: • Big8410: Standard release on gloss side • Big8410ER: Easy release on gloss side • Big8420: Differential release (standard on gloss side, easy on the matte side which allows for a clean unwind of the finished roll) These papers are available in widths ranging from 1 inch to 58 inches. Rolls are produced in maximum lengths of 5,000 feet. Three inch core size (ID) is standard. PressureSensitive Adhesive S3 Adhesive: Used for specialty applications needing good weathering and creep resistance. Its properties are as follows • Adhesive Type: Solvent-based Acrylic • Adhesive Thickness: 2.0 mil minimum • Adhesion to Steel: 2.0 lbs/inch width minimum • Temperature Range: –40 d40 d40 degrees F. to 180 degrees F. Color Matching Available in most formulations. • We are capable of producing custom colors and color matches utilizing state-of-the-art technology • Computerized laboratory equipment facilitates batch-to-batch reproducibility. Laminations Permanent laminations double the available thickness ranges of our product line. • Specialty and customer supplied materials can be incorporated to add value and make use of our advanced adhesive technology • Capable of laminating films, foils and non woven GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved
- 8. AUTOMOTIVE MOULDINGS ACCESSORIES Product Profile 4" Blade 4" Replacement Cutter Blade And Anvil Cutter 4" Blades 4" DRIP RAIL MOLDING Product Profile Width DR02 All Black Length 5/8" 50' 150' TRUCK RAIL GUARD Product Profile Width TRG02 All Black GaskeTech 105-190 Mills Road - Kelowna, BC V1X 4G7 Canada Phone: 1 877 762 7325 Fax: (250) 762 9656 info@gasketech.com © 2004 All Rights Reserved Length 3 5/8" 68" 22'