C 9104
0 likes440 views
The C-9104 conventional ultraviolet flame detector is designed for high hazard environments such as petrochemical plants, utilizing highly sensitive technology to detect UV rays from flames. It features an IP32 protection rating, operates within a temperature range of -10°C to +50°C, and ensures reliable detection by resisting dust, humidity, and corrosion. Installation must comply with local codes and it is compatible with GST conventional fire alarm panels.
C 9104
- 1. Conventional Ultraviolet Flame C-9104 Features: 1. 2. 3. 4. 5. 6. 7. Technical Specifications • • • Protection rating: IP 32 Operating voltage: 24Vdc Operating Current: Standby current 1.5mA Alarm Current 10mA Operating temp:-10°C to +50°C Relative humidity: 95% Application: Indoor use Detection angle: 80 degree Visual Indicator: LED, Red ( lit steady when alarm Material and colour: ABS, off-white Wiring: 1 pair polarized Dimensions: diameter 10cm; height 5cm EMBEDDED BOX CONCRETE PAD OR HOLDING PAD MARK−LINE 2ND MARK−LINE LED INDICATOR ROTATE CLOCKWISE Wiring and Connection Connect the wires to the required terminal according to the wire diagram with matching active end of line (P-9907).and (DZ-03D) required base is The cable must be fire rated type and the size depends on the distance and application. Minimum size gauge 1.0mm²(18 AWG) CONVENTIONAL PANEL OR + The C-9104 Conventional Ultraviolet Flames Detector is fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored. The C-9104 sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dustresistant, corrosion-proof and moistureresistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. • • • • • Detector Installation The combination of fire detection should be installed complied with all local codes and / or NFPA 72 National Fire Alarm Code, NFPA 70 National Electrical Code. Verify the proper wiring and base is firmly mounted to prevent detector damage before the installation. Point the detector in the base by the mark-line and secure the detector in that position by rotates it clockwise until it reaches the next mark line. Not sensitive by sunlight Dust /corrosion/humidity resistance Secure and speedy communication Standard calibration set to detect a 3cm flame at 6metres Effective range 12 metres 110º effective detection dispersion angle Twin LED for 360º vision Description: • • • Selection of compatible Control Panels Compatible with all GST Conventional panel and GST Intelligent Fire Alarm Panels using Zone monitor module: ZONE MONITOR MODULE − 1 2 1 2 1 4 3 4 3 4 2 3 P−9907 ACTIVE END OF LINE C−9102 SMOKE DETECTOR C−9101 SMOKE/HEAT DETECTOR Ordering Information: Part No C-9104 DZ-03 DZ-03D Description Weight /Kg Conventional Ultraviolet Flame Detector Detector Base -EOLR Base with Diode AOL 0.123 Pack Qty per Box 120 0.05 0.05 360 360 MANUFACTURED IN ACCORDANCE WITH Note: Specifications are subject to change without notice.