ComNet C1-US Data Sheet
0 likes204 views
The document outlines specifications for the Comnet C1 rack mount card cage and modular power supply, highlighting features such as automatic electronic current limiting, voltage transient protection, and hot-swappable modules. With fourteen 1-inch rack slots and a design that prevents system failure from a single module fault, the product is engineered for reliability and ease of use in various environments. Additionally, it provides detailed ordering information and compliance standards.
ComNet C1-US Data Sheet
- 1. 3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET SPECIFICATIONS ORDERING INFORMATION Features › Automatic electronic current limiting feature › Voltage transient protection on all power and signal input/ output lines provides unconditional protection from power surges and other voltage transient events. › (14) Fourteen 1-inch rack slots available › All modules located within the chassis rack are hot- swappable › Lifetime Warranty The design approach employed by ComNet™ for equipment mounted within the card cage rack unit (C1-CH) with modular power supply (C1PS), provides for the elimination of a single-point failure in the event of a major fault within any module located within the chassis rack. This is accomplished through the use of automatic electronic current limiting within each rack-mountable module, rather than providing the current limiting within the power supply unit which supports the power requirements for equipment located within the rack. In nearly all competing designs,a major fault within a module, located within the chassis rack, results in the power supply unit going into a current limiting condition, and as a result, all of the modules within the rack shut down. The rack design employed by ComNet eliminates this possibility, as only the faulty module shuts down, and the operation of the other modules within the rack continue unimpaired. This automatic current limiting feature is also self-resetting, should the fault or overload be of a temporary or intermittent condition. Furthermore, all modules located within the chassis rack are hot-swappable, so that it is not necessary to power-down the rack when removing or replacing modules. C1 Rack Mount Card Cage With Power Supply Electrical Input Voltage 90-264 VAC @ 70 W Maximum Output Voltage 9 VDC +/- 5% @ 6.5 Amps @ 75˚C Fusing 1.25 A slow blow (rack power supply) Plug-in modules individually electronically fused. Each power supply unit is individually fused. Power Indicator Red LED AC Line Cord Detachable, IEC-connected. Allows easy field replacement or exchange for various worldwide AC power plug configurations. Mechanical Size (L × W × H) Rack Mount: 19.0 × 7.5 × 6.9 in. (48.2 × 19 × 17.5 cm) Rack Slots: (14) 1-inch slots available Shipping Weight: 5 lbs./2.15 kg Environmental MTBF 100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Heat Generation 240 BTU AGENCY COMPLIANCE* *Power Supply Only In a continuing effort to improve and advance technology, product specifications are subject to change without notice. Part Number Description C1-US 19” Rack (US AC Power Cord) C1-EU 19” Rack (EU UK Power Cord) C1-IN 19” Rack (US, EU, UK AU Power Cord) C1-CH 19” Rack (no power supply) C1PS Spare 90-264 VAC Input Power Supply (order power cords separately) Included Accessories 90-264 VAC Input (includes power supply and power cord) Included with C1-US, C1-EU and C1-IN only Options C1-BP – Blank Panel (1”) C1-BP2 – Blank Panel (2”) C1-BP3 – Blank Panel (3”) C1-SA – South African Power Cord C1-AU – Australian Power Cord