Camden CI-WPSH Instruction Manual
1 like128 views
The document provides installation instructions for two types of ceiling pull switches, ci-wps1 and ci-scp1, designed for industrial use in wet/outdoor environments. It outlines specifications, including UL/CSA listing, NEMA 4 rating, and electrical ratings, as well as installation guidelines for proper wiring and mounting. Warnings are given regarding power connection and installation clearance to ensure safe operation.
Camden CI-WPSH Instruction Manual
- 1. CI-WPS1, CI-SCP1 Ceiling Pull Switches Installation Instructions These pull switches are designed for use in factories, warehouses, and other industrial applications. These units are UL/CSA listed, and NEMA 4 rated for use in wet/outdoor environments. They provide SPST momentary (CI-WPS1) and SPDT momentary (CI-SCP1) operation. Switch contacts are rated 3 Amps @ 240 VAC. INSTALLATION The electrician installing the unit should provide a UL listed watertight hub or fitting for UL type “4” rating. The CI-WPS1 may be mounted to a wall or a ceiling, while the CI-SCP1 is meant to be ceiling mounted. CAUTION should be taken when connecting wires in conduit housing to be sure there is ample clearance inside the box so as not to interfere with the insertion of the switches when the front cover plate is installed. WARNING: Do NOT apply power to the unit until all wiring is complete. Figure 1 - CI-WPS1 Wall Mount Switch Figure 2 - CI-SCP1 Ceiling Mount Switch Figure 4 -CI-SCP1 Schematic Figure 3 -CI-WPS1 Schematic
- 2. CI-WPS1 and CI-SCP1 Installation Instructions www.camdencontrols.com Toll Free: 1.877.226.3369 File:CI_SCP1_WSP1_NF_Man_Rev1.doc Revised: November 26, 2010 Part No.: 40-82B081 5502 Timberlea Blvd., Mississauga, ON Canada L4W 2T7 Figure 5 - CI-WPS1 Mechanical Figure 6 - CI-SCP1 Mechanical