Camera specifications pq_criteria
- 1. 1 Camera Specifications Table of Contents 1. Camera and VMS Specifications....................................................................................................... 2-6 2. Pre-Qualification Criteria for Bidder............................................................................................................................................... 7 3. Pre-Qualification Criteria for OEM................................................................................................................................................. 8
- 2. CCTV Camera Specifications 2 1. Camera Specifications S.no Feature Parameter 1 Indoor DOME Camera a Features 5 MP Indoor Dome Camera b Sensor type 5 MP, 1/3" CMOS c Lens 2.8-13.5 mm Remote Zoom –Remote Focus motorized Varifocal d Light sensitivity-colour 0.1 Lux-Day/Night: 0.01 Lux, IR Sensitive e Dynamic range 120 dB f Backlight compensation Yes g Privacy masking Yes h Video Compression H.265,H.264, M-JPEG i Resolution 2592 H x 1944 V j Frame Rate 30fps k Network Interface Ethernet 10/100 Mbps, RJ-45 l Power Supply PoE 803 m Illumination Integrated IR of 20 meters range n Operating Conditions 0 to 50°C at up to 90% RH o Supported protocols SNMP, IPv6, IPv4, HTTP, HTTPS, SSL, TCP/IP, UPnP, UDP, RTCP, RTSP, RTP, SMTP, NTP, DHCP, FTP, 802.1x p Certifications CE-FCC, Onvif S and G r Enclosure Type Dome; Indoor
- 3. CCTV Camera Specifications 3 S.no Feature Parameter 2 Fixed Bullet Camera a Features 5 MP All in One Bullet Camera b Sensor type 5 MP,1/2.9" CMOS c Lens 3.6 mm Fixed Iris Camera d Light sensitivity-colour 0.1 Lux-Day/Night: 0.01 Lux, IR Sensitive e Dynamic range 120 dB f Backlight compensation Yes g Privacy masking Yes h Video Compression H.265,H.264, M-JPEG i Resolution 2592 H x 1944 V j Frame Rate 30fps k Network Interface Ethernet 10/100 Mbps, RJ-45 l Power Supply PoE 803 m Illumination Integrated IR of 20 meters range n Operating Conditions 0 to 50°C at up to 90% RH o Supported protocols SNMP, IPv6, IPv4, HTTP, HTTPS, SSL, TCP/IP, UPnP, UDP, RTCP, RTSP, RTP, SMTP, NTP, DHCP, FTP, 802.1x p Certifications CE-FCC, Onvif S and G q Streams Up to 8 Individual Streams of at least 3 different types r Enclosure Type Bullet; IP 66/IK 10
- 4. CCTV Camera Specifications 4 S.no Feature Parameter 3 360 degree Surveillance Multi Sensor Panoramic Camera ( Omni Directional ) a Sensor type 4 x 3MP, 1/3.2" true wdr CMOS - 12MP b Lens Megapixel Fixed Focal Lens 2.8/4/6/8/12/16mm c Light sensitivity Colour (Non-Binning): 0.5 Lux @ F2.0 d Light Sensitivity Monochrome 0 Lux, IR sensitive e WDR 100 DB f White Balance Auto g Backlight compensation Required h AGC, Auto IRIS Required i Compression MPEG-4 / H.264 j Max Resolution PAL / NTSC 2048 x 1536 (each sensor) 8192 x 1536 (Total) k Max. frame rate 5/6 Fps l Network Interface Ethernet 10/100 Mbps m Operating Temperature 32 to 122˚F / 0 to 50˚C n Operating Relative humidity 8 - 90% non-condensing o Environment Indoor/Outdoor IP 66/IK 10
- 5. CCTV Camera Specifications 5 S.no Feature Parameter 4 Video Recording Server Solution on Type School a Server Form Factor Appliance Form Factor b Concurrent Users 5 concurrent users for camera access c Channels 16 channels with 16 Port Built in POE d IPs for each camera supports 30 No. of ips from each camera e Recording Rate Up to 100Mbps f Display Resolution up to 4K (HDMI) and 1080P (VGA) g USB ports Front: 2 x USB 2.0 Rear: 2 x USB 2.0 / 2 x USB 3.0 h Audio over IP Supported i Storage Minimum 2 Drive Bays per Appliance ; 20 TB Storage j OS Drive Solid State OS Drive (SDD) k NIC Dual Gigabit Ethernet NIC l Other Features Application to support Automatic and Manual Camera Discovery Application to support Video Signal Loss Detection Application to support 16 Channels Live View Application should support ability to assign User friendly names to Cameras Application should support manual configuration of recording / viewing modes and streams Ability to set and change camera image and exposure settings from the application Should support RTSP mode of adding cameras
- 6. CCTV Camera Specifications 6 S.no Feature Parameter 5 Video Recording Server Solution on (Central Site) a Server Form Factor 2U Rack Mount Form Factor b Concurrent Users 5 concurrent users for camera access c Operating System Microsoft Windows 10 d Channels 64 channels set up on a single server unit e IPs for each camera supports 30 No. of ips from each camera f CPU Equipped with i7 CPU and Intel Gigabyte Q170 Mainboard which supports 7th/8th Gen. Intel Core processors and Intel’s vPro technology g RAM and Graphics Card 8GB DDR4 RAM and Intel HD Graphic 630 card h Recording Resolution Up to 4K i Display Resolution up to 4K with 1 x DVI-D / 1 x DVI-I / 2 x HDMI ports j USB ports USB 2.0 and 3.0 ports - Front: 2 x USB 2.0 Rear: 2 x USB 2.0 / 4 x USB 3.0 k Audio over IP Supported l Storage Minimum 8 Drive Bays per server ; 80 TB storage per server with RAID 5 m OS Drive Solid State OS Drive (SDD) n NIC Dual Gigabit Ethernet NIC o Recording Rate Up to 500bps with RAID p Other Features Supports VM setup and architecture Application to support Automatic and Manual Camera Discovery Application to support Video Signal Loss Detection Application to support 64 channel client side live view salvos Application should support ability to assign User friendly names to Cameras Application should support manual configuration of recording / viewing modes and streams Ability to set and change camera image and exposure settings from the application Should support RTSP mode of adding cameras
- 7. CCTV Camera Specifications 7 2. Pre-Qualification Criteria for Bidder PQ# Qualification Criteria Documents to be submitted PQ1 The bidder should be a company registered under Indian Companies Act, 1956 or a Partnership Firm registered under Indian Partnership Act, 1932 or a Proprietorship firm or Limited Liability Partnership Firm under Limited Liability Partnership Firm Act 2008. For companies incorporated in India, Certificate of Incorporation/ Registration under Companies Act, 1956/2013. PQ2 The bidder should have average turnover of Rs. 100 Crores in last 3 financial years (i.e. 2014-15, 2015-16 and 2016-17). Copy of the audited Profit & Loss Statements for each of the last 3 financial years. PQ3 The bidder should have a positive net-worth in the financial year ending on 31/03/2017. Certificate from the Chartered Accountant. PQ4 The bidder should have experience of supply of 500 number of cameras for surveillance projects Copy of work order / purchase order / contract clearly showing the number of cameras. PQ5 Experience of implementing at least 1 Number of large IT System Integration project (April 2014 – Till Bid Submission Date) (with project value of Rs 25 Crore or more). Copy of work order and completion certificate should be attached. PQ6 The bidder should submit valid documentary proof of GST registration number and the details of income tax registration (PAN). • Copy of PAN Card • Copy of GST registration PQ7 The bidder should be ISO 9001:2015, ISO 27001:2013, CMMi3 certified company. Copies of the ISO and CMMi3 certificates PQ8 The bidder should not be debarred / black-listed by Government in India or State Government, at the time of submission of the bid. Self-certification by the bidder
- 8. CCTV Camera Specifications 8 3. Pre-Qualification Criteria for OEM PQ# Qualification Criteria Documents to be submitted PQ1 Camera OEM should have 10 years of Global presence Company Registration Certificate PQ2 Camera OEM should have sold 50,000 number of cameras each year, for last 5 years Self-attested declaration from OEM PQ3 Cameras and Video Recording should be from the same OEM Self-attested declaration from OEM