![Modeling of BCC Systems
Erlang B formula is given by
Pr[blocking]= (AC/C ! )
where C is the number of trunked channels offered by a
trunked radio system and A is the total offered traffic.
53](https://image.slidesharecdn.com/chap3cellularconcepts-131217025114-phpapp01/85/cellular-concepts-in-wireless-communication-53-320.jpg)
![BCC System Example
Assuming that each user in a system generates a traffic
intensity of 0.2 Erlangs, how many users can be supported for
0.1% probability of blocking in an Erlang B system for a
number of trunked channels equal to 60.
Solution 1:
System is an Erlang B
Au = 0.2 Erlangs
Pr [Blocking] = 0.001
C = 60 Channels
From the Erlang B figure, we see that
A ≈ 40 Erlangs
Therefore U=A/Au=40/0.02=2000users.
57](https://image.slidesharecdn.com/chap3cellularconcepts-131217025114-phpapp01/85/cellular-concepts-in-wireless-communication-57-320.jpg)
![Modeling of BCD Systems
Probability that any caller is delayed in queue for a wait time
greater than t seconds is given as GOS of a BCD System
The probability of a call getting delayed for any period of time
greater than zero is
P[delayed call is forced to wait > t sec]=P[delayed] x Conditional
P[delay is >t sec]
Mathematically;
Pr[delay>t] = Pr [delay>0] Pr [delay>t| delay>0]
Where
P[delay>t| delay>0]= e(-(C-A)t/H)
Pr[delay>t] = Pr [delay>0] e(-(C-A)t/H)
where C = total number of channels, t =delay time of interest, H=average
duration of call
61](https://image.slidesharecdn.com/chap3cellularconcepts-131217025114-phpapp01/85/cellular-concepts-in-wireless-communication-61-320.jpg)
![Cell Splitting-Power Issues
Suppose the cell radius of new cells is reduced by half
What is the required transmit power for these new cells??
Pr[at old cell boundary]=Pt1R-n
Pr[at new cell boundary]= Pt2(R/2) –n
where Pt1and Pt2are the transmit powers of the larger and
smaller cell base stations respectively, and n is the path loss
exponent.
So,
Pt2= Pt1/2n
If we take n=3 and the received powers equal to each other, then
Pt2=Pt1/8
In other words, the transmit power must be reduced by 9dB in order
to fill in the original coverage area while maintaining the S/I
requirement
68](https://image.slidesharecdn.com/chap3cellularconcepts-131217025114-phpapp01/85/cellular-concepts-in-wireless-communication-68-320.jpg)
cellular concepts in wireless communication
- 1. The Cellular Concept 3rd Chapter Wireless Communication By Theodore S. Rappaport 2nd Edition 1
- 2. Cellular Systems-Basic Concepts Cellular system solves the problem of spectral congestion. Offers high capacity in limited spectrum. High capacity is achieved by limiting the coverage area of each BS to a small geographical area called cell. Replaces high powered transmitter with several low power transmitters. Each BS is allocated a portion of total channels and nearby cells are allocated completely different channels. All available channels are allocated to small no of neighboring BS. Interference between neighboring BSs is minimized by allocating different channels. 2
- 3. Cellular Systems-Basic Concepts Same frequencies are reused by spatially separated BSs. Interference between co-channels stations is kept below acceptable level. Additional radio capacity is achieved. Frequency Reuse-Fix no of channels serve an arbitrarily large no of subscribers 3
- 4. Frequency Reuse used by service providers to improve the efficiency of a cellular network and to serve millions of subscribers using a limited radio spectrum After covering a certain distance a radio wave gets attenuated and the signal falls below a point where it can no longer be used or cause any interference A transmitter transmitting in a specific frequency range will have only a limited coverage area Beyond this coverage area, that frequency can be reused by another transmitter. The entire network coverage area is divided into cells based on the principle of frequency reuse 4
- 5. Frequency Reuse A cell = basic geographical unit of a cellular network; is the area around an antenna where a specific frequency range is used. when a subscriber moves to another cell, the antenna of the new cell takes over the signal transmission a cluster is a group of adjacent cells, usually 7 cells; no frequency reuse is done within a cluster the frequency spectrum is divided into sub-bands and each sub-band is used within one cell of the cluster in heavy traffic zones cells are smaller, while in isolated zones cells are larger 5
- 6. Frequency Reuse The design process of selecting and allocating channel groups for all of the cellular base stations within a system is called frequency reuse or frequency planning. Cell labeled with same letter use the same set of frequencies. Cell Shapes: Circle, Square, Triangle and Hexagon. Hexagonal cell shape is conceptual , in reality it is irregular in shape 6
- 8. Frequency Reuse In hexagonal cell model, BS transmitter can be in centre of cell or on its 3 vertices. Centered excited cells use omni directional whereas edge excited cells use directional antennas. A cellular system having „S‟ duplex channels, each cell is allocated „k‟ channels(k<S). If S channels are allocated to N cells into unique and disjoint channels, the total no of available channel is S=kN. 8
- 9. Frequency Reuse N cells collectively using all the channels is called a cluster, is a group of adjacent cells. If cluster if repeated M times, the capacity C of system is given as C=MkN=MS Capacity of system is directly proportional to the no of times cluster is repeated. Reducing the cluster size N while keeping the cell size constant, more clusters are required to cover the given area and hence more capacity. Co-channel interference is dependent on cluster size, large cluster size less interference and vice versa. 9
- 10. Frequency Reuse The Frequency Reuse factor is given as 1/N, each cell is assigned 1/N of total channels. Lines joining a cell and each of its neighbor are separated by multiple of 600,certain cluster sizes and cell layout possible Geometery of hexagon is such that no of cells per cluster i.e N, can only have values which satisfy the equation N=i2+ij+j2 N, the cluster size is typically 4, 7 or 12. In GSM normally N =7 is used. i and j are integers, for i=3 and j=2 N=19. Example from Book 10
- 12. Channel Assignment Strategies A scheme for increasing capacity and minimizing interference is required. CAS can be classified as either fixed or dynamic Choice of CAS impacts the performance of system. In Fixed CA each cell is assigned a predetermined set of voice channels Any call attempt within the cell can only be served by the unused channel in that particular cell If all the channels in the cell are occupied, the call is blocked. The user does not get service. In variation of FCA, a cell can borrow channels from its neighboring cell if its own channels are full. 12
- 13. Dynamic Channel Assignment Voice channels are not allocated to different cells permanently. Each time a call request is made, the BS request a channel from the MSC. MSC allocates a channel to the requesting cell using an algorithm that takes into account likelihood of future blocking The reuse distance of the channel ( should not cause interference) Other parameters like cost To ensure min QoS, MSC only allocates a given frequency if that frequency is not currently in use in the cell or any other cell which falls within the limiting reuse distance. DCA reduce the likelihood of blocking and increases capacity Requires the MSC to collect realtime data on channel occupancy and traffic distribution on continous basis. 13
- 14. Hand-off Mobile moves into a different cell during a conversation, MSC transfers the call to new channel belonging to new BS Handoff operation involves identifying the new BS and allocation of voice and control signal to channels associated with new BS Must be performed successfully, infrequently and impercitble to user To meet these requirements an optimum signal level must be defined to initiate a handoff. Min usuable signal for acceptable voice qualtiy -90 to -100 dBm A slight higher value is used as threshold 14
- 15. Handoff By looking at the variations of signal strength from either BS it is possible to decide on the optimum area where handoff can take place 15
- 16. 16
- 17. Hand-off strategies Handoff is made when received signal at the BS falls below a certain threshold During handoff: to avoid call termination, safety margin should exist and should not be too large or small =Power_handoff – Power_min usable Large results in unecesarry handoff and for small unsufficient time to complete handoff, so carefully chosen to meet the requirements. Fig a, handoff not made and signal falls below min acceptable level to keep the channel active. Can happen due to excessive delay by MSC in assigning handoff, or when threshold is set to small. Excessive delay may occur during high traffic conditions due to computional loading or non avialablilty of channels in nearby cells 17
- 18. Hand-off In deciding when to handoff , it is important to ensure that the drop in signal level is not due to momentary fading. In order to ensure this the BS monitors the signal for a certain period of time before initiating a handoff The length of time needed to decide if handoff is necessary depends on the speed at which the mobile is moving 18
- 19. Hand-off strategies In 1st generation analog cellular systems, the signal strength measurements are made by the BS and are supervised by the MSC. A spare Rx in base station (locator Rx) monitors RSS of RVC's in neighboring cells Tells Mobile Switching Center about these mobiles and their channels Locator Rx can see if signal to this base station is significantly better than to the host base station MSC monitors RSS from all base stations & decides on handoff 19
- 20. Hand-off strategies In 2nd generation systems Mobile Assisted Handoffs (MAHO)are used In MAHO, every MS measures the received power from the surrounding BS and continually reports these values to the corresponding BS. Handoff is initiated if the signal strength of a neighboring BS exceeds that of current BS MSC no longer monitors RSS of all channels reduces computational load considerably enables much more rapid and efficient handoffs imperceptible to user 20
- 21. Soft Handoff CDMA spread spectrum cellular systems provides a unique handoff capability Unlike channelized wireless systems that assigns different radio channel during handoff (called hard handoff), the spread spectrum MS share the same channel in every cell The term handoff here implies that a different BS handles the radio communication task The ability to select between the instantaneous received signals from different BSs is called soft handoff 21
- 22. Inter system Handoff If a mobile moves from one cellular system to a different system controlled by a different MSC, an inter-system handoff is necessary MSC engages in intersystem handoff when signal becomes weak in a given cell and MSC cannot find another cell within its system to transfer the on-going call Many issues must be resolved Local call may become long distance call Compatibility between the two MSCs 22
- 23. Prioritizing Handoffs Issue: Perceived Grade of Service (GOS) – service quality as viewed by users “quality” in terms of dropped or blocked calls (not voice quality) assign higher priority to handoff vs. new call request a dropped call is more aggravating than an occasional blocked call Guard Channels % of total available cell channels exclusively set aside for handoff requests makes fewer channels available for new call requests a good strategy is dynamic channel allocation (not fixed) adjust number of guard channels as needed by demand so channels are not wasted in cells with low traffic 23
- 24. Prioritizing Handoffs Queuing of Handoff Requests use time delay between handoff threshold and minimum useable signal level to place a blocked handoff request in queue a handoff request can "keep trying" during that time period, instead of having a single block/no block decision prioritize requests (based on mobile speed) and handoff as needed calls will still be dropped if time period expires 24
- 25. Practical Handoff Considerations Problems occur because of a large range of mobile velocities pedestrian vs. vehicle user Small cell sizes and/or micro-cells → larger # handoffs MSC load is heavy when high speed users are passed between very small cells Umbrella Cells use different antenna heights and Tx power levels to provide large and small cell coverage multiple antennas & Tx can be co-located at single location if necessary (saves on obtaining new tower licenses) large cell → high speed traffic → fewer handoffs small cell → low speed traffic example areas: interstate highway passing through urban center, office park, or nearby shopping mall 25
- 27. Typical handoff parameters Analog cellular (1st generation) threshold margin △ ≈ 6 to 12 dB total time to complete handoff ≈ 8 to 10 sec Digital cellular (2nd generation) total time to complete handoff ≈ 1 to 2 sec lower necessary threshold margin △ ≈ 0 to 6 dB enabled by mobile assisted handoff 27
- 28. Reuse Ratio: For hexagonal cell reuse distance is given by D=R(√3N) Where R is cell size or cell radius and N is cluster size D increases as we increase N Reuse factor is given by Q=D/R=(√3N) 28
- 29. Interference Goals for this section Co-Channel Adjacent Channel How to calculate signal to interference ratio 29
- 30. Interference Interference is major limiting factor in the performance of cellular radio. It limits the capacity and increases the no of dropped calls. Sources of interference include Another mobile in same cell A call in progress in a neighboring cell Other BSs operating in the same frequency band 30
- 31. Effects of Interference Interference in voice channels causes Crosstalk Noise in background Interference in control channels causes Error in digital signaling, which causes Missed calls Blocked calls Dropped calls 31
- 32. Interference Two major types of Interferences Co-channel Interference (CCI) Adjacent channel Interference (ACI) CCI is caused due to the cells that reuse the same frequency set. These cells using the same frequency set are called Cochannel cells ACI is caused due to the signals that are adjacent in frequency 32
- 33. Co-channel Interference Increase base station Tx power to improve radio signal reception? will also increase interference into other co-channel cells by the same amount no net improvement Separate co-channel cells by some minimum distance to provide sufficient isolation from propagation of radio signals? if all cell sizes, transmit powers, and coverage patterns ≈ same → co-channel interference is independent of Tx power 33
- 34. Co-channel Interference co-channel interference depends on: if D/R ↑ then spatial separation relative to cell coverage area ↑ improved isolation from co-channel RF energy Q = D / R : co-channel reuse ratio R : cell radius D : distance to base station of nearest co-channel cell where D=R(√3N) hexagonal cells → Q = D/R = √3N Smaller value of Q provides larger capacity, but higher CCI Hence there is tradeoff between capacity and interference. small Q → small cluster size → more frequency reuse → larger system capacity small Q → small cell separation → increased CCI 34
- 35. Signal to Interference ratio S/I The Signal-to-Interference (S/I) for a mobile is S is desired signal power ,Ii : interference power from ith co-channel cell The average received power at distance d is Pr=Po (d/do)-n The RSS decays as a power law of the distance of separation between transmitter and receiver Where Po is received power at reference distance do and n is the path loss exponent and ranges between 2-4 If Di is the distance of ith interferer, the received power is proportional to (Di)-n 35
- 36. Signal to Interference ratio S/I The S/I for mobile is given by S I R i0 (D / R) 6 ( Di ) i n n 6 n ( 3N ) 6 n Q 4 6 1 With only the first tier(layer of) equidistant interferers. For a hexagonal cluster size, which always have 6 CC cell in first tier 36
- 37. Signal to Interference ratio S/I The MS is at cell boundary The aproximate S/I is given by, both in terms of R and D, along with channel reuse ratio Q 37
- 38. Example S/I Examples for Problem 2.3 TDMA can tolerate S/I = 15 dB What is the optimal value of N for omni-directional antennas? Path loss = 4. Co-channel Interference cluster size N =7 (choices 4,7,12) path loss exponent (means)n=4 co-channel reuse ratio Q=sqrt(3N)=4.582576 Ratio of distance to radius Q=D/R=4.582576 number of neighboring cells io=6 # of sides of hexagon signal to interference ratio S/I= (D/R)^n / io =73.5 convert to dB, S/I=10log(S/I) =18.66287dB S/I is greater than required, it will work. 38
- 39. Example S/I cluster size N=4 (choices 4,7,12) path loss exponent (means) n=4 co-channel reuse ratio Q= sqrt(3N)=3.464102 Ratio of distance to radius Q=D/R=3.464102 number of neighboring cells io=6 ,# of sides of hexagon signal to interference ratio S/I= (D/R)^n / io =24 convert to dB, S/I= 10log(S/I)=13.80211dB S/I is less than required, it will not work! cluster size N=7 path loss exponent n=3 Q=sqrt(3N)=4.582576 number of neighboring cells io= 6, # of sides of hexagon signal to interference ratio=S/I= (D/R)^n / io =16.03901 convert to dB, S/I=10log(S/I)=12.05178dB S/I is less than required, it will not work! 39
- 40. Adjacent Channel Interference Results from imperfect receiver filters, allowing nearby frequencies to leak into pass-band. Can be minimized by careful filtering and channel assignments. Channels are assigned such that frequency separations between channels are maximized. For example, by sequentially assigning adjacent bands to different cells Total 832 channels, divided into two groups with 416 channels each. Out of 416, 395 are voice and 21 are control channels. 395 channels are divided into 21 subsets, each containing almost 19 channels, with closet channel 21 channels away If N=7 is used, each cell uses 3 subsets, assigned in such a way that each channel in a cell is 7 channels away. 40
- 41. 1 2 3 4 5 6 7 8 9 1011 121314 freq 4 G 11 2 B9 1 A8 6 F 13 5 C 12 7 D14 3 E10 Frequency Planning/Channel Assignment 41
- 42. 42
- 43. Learning Objectives Concept of Trunking Key definitions in Trunking /Traffic Theory Erlang-(unit of traffic) Grade of Service Two Types of Trunked Systems Trunking Efficiency 43
- 44. Trunking & Grade of Service Cellular radio systems rely on trunking to accommodate a large number of users in a limited radio spectrum. Trunking allows a large no of users to share a relatively small number of channels in a cell by providing access to each user, on demand, from a pool of available channels. In a trunked radio system (TRS) each user is allocated a channel on a per call basis, upon termination of the call, the previously occupied channel is immediately returned to the pool of available channels. 44
- 45. Key Definitions Setup Time: Time required to allocate a radio channel to a requesting user Blocked Call: Call which cannot be completed at the time of request, due to congestion(lost call) Holding Time: Average duration of a typical call. Denoted by H(in seconds) Request Rate: The average number of calls requests per unit time( λ) Traffic Intensity: Measure of channel time utilization or the average channel occupancy measured in Erlangs. Dimensionless quantity. Denoted by A Load: Traffic intensity across the entire TRS (Erlangs) 45
- 46. Erlang-a unit of traffic The fundamentals of trunking theory were developed by Erlang, a Danish mathematician, the unit bears his name. An Erlang is a unit of telecommunications traffic measurement. Erlang represents the continuous use of one voice path. It is used to describe the total traffic volume of one hour A channel kept busy for one hour is defined as having a load of one Erlang For example, a radio channel that is occupied for thirty minutes during an hour carries 0.5 Erlangs of traffic For 1 channel Min load=0 Erlang (0% time utilization) Max load=1 Erlang (100% time utilization) 46
- 47. Erlang-a unit of traffic For example, if a group of 100 users made 30 calls in one hour, and each call had an average call duration(holding time) of 5 minutes, then the number of Erlangs this represents is worked out as follows: Minutes of traffic in the hour = number of calls x duration Minutes of traffic in the hour = 30 x 5 = 150 Hours of traffic in the hour = 150 / 60 = 2.5 Traffic Intensity= 2.5 Erlangs 47
- 48. Traffic Concepts Traffic Intensity offered by each user(Au): Equals average call arrival rate multiplied by the holding time(service time) Au=λH(Erlangs) Total Offered Traffic Intensity for a system of U users (A): A =U*Au(Erlangs) Traffic Intensity per channel, in a C channel trunked system Ac=U*Au/C(Erlangs) 48
- 49. Trunking & Grade of Service In a TRS, when a particular user requests service and all the available radio channels are already in use , the user is blocked or denied access to the system. In some systems a queue may be used to hold the requesting users until a channel becomes available. Trunking systems must be designed carefully in order to ensure that there is a low likelihood that a user will be blocked or denied access. The likelihood that a call is blocked, or the likelihood that a call experiences a delay greater than a certain queuing time is called “Grade of Service” (GOS)’’. 49
- 50. Trunking & Grade of Service Grade of Service (GOS): Measure of ability of a user to access a trunked system during the busiest hour. Measure of the congestion which is specified as a probability. The probability of a call being blocked Blocked calls cleared(BCC) or Lost Call Cleared(LCC) or Erlang B systems The probability of a call being delayed beyond a certain amount of time before being granted access Blocked call delayed or Lost Call Delayed(LCD) or Erlang C systems 50
- 51. Blocked Call Cleared Systems When a user requests service, there is a minimal call set-up time and the user is given immediate access to a channel if one is available If channels are already in use and no new channels are available, call is blocked without access to the system The user does not receive service, but is free to try again later All blocked calls are instantly returned to the user pool 51
- 52. Modeling of BCC Systems The Erlang B model is based on following assumptions : Calls are assumed to arrive with a Poisson distribution There are nearly an infinite number of users Call requests are memory less ,implying that all users, including blocked users, may request a channel at any time All free channels are fully available for servicing calls until all channels are occupied The probability of a user occupying a channel(called service time) is exponentially distributed. Longer calls are less likely to happen There are a finite number of channels available in the trunking pool. Inter-arrival times of call requests are independent of each other 52
- 53. Modeling of BCC Systems Erlang B formula is given by Pr[blocking]= (AC/C ! ) where C is the number of trunked channels offered by a trunked radio system and A is the total offered traffic. 53
- 54. Erlang B 54
- 55. Example 3.4 How many users can be supported for 0.5% blocking probability for the following number of trunked channels in a BCC system? (a) 5, (b) 10,(c)=20. Assumed that each user generates 0.1 Erlangs of traffic. Solution Given C=5, GOS=0.005, Au=0.1, From graph/Table using C=5 and GOS=0.005,A=1.13 Total Number of users U=A/Au=1.13/0.1=11 users Given C=10, GOS=0.005, Au=0.1, From graph/Table using C=5 and GOS=0.005,A=3.96 Total Number of users U=A/Au=3.96/0.1=39 users Given C=20, GOS=0.005, Au=0.1, From graph/Table using C=20 and GOS=0.005,A=11.10 Total Number of users U=A/Au=11.10/0.1=110 users 55
- 56. Erlang B Trunking GOS 56
- 57. BCC System Example Assuming that each user in a system generates a traffic intensity of 0.2 Erlangs, how many users can be supported for 0.1% probability of blocking in an Erlang B system for a number of trunked channels equal to 60. Solution 1: System is an Erlang B Au = 0.2 Erlangs Pr [Blocking] = 0.001 C = 60 Channels From the Erlang B figure, we see that A ≈ 40 Erlangs Therefore U=A/Au=40/0.02=2000users. 57
- 58. Blocked Call Delayed(BCD) Systems Queues are used to hold call requests that are initially blocked When a user attempts a call and a channel is not immediately available, the call request may be delayed until a channel becomes available Mathematical modeling of such systems is done by Erlang C formula The Erlang C model is based on following assumptions : Similar to those of Erlang B Additionally, if offered call cannot be assigned a channel, it is placed in a queue of infinite length Each call is then serviced in the order of its arrival 58
- 59. Blocked Call Delayed Systems Erlang C formula which gives likelihood of a call not having immediate access to a channel (all channels are already in use) 59
- 60. Erlang C = 60
- 61. Modeling of BCD Systems Probability that any caller is delayed in queue for a wait time greater than t seconds is given as GOS of a BCD System The probability of a call getting delayed for any period of time greater than zero is P[delayed call is forced to wait > t sec]=P[delayed] x Conditional P[delay is >t sec] Mathematically; Pr[delay>t] = Pr [delay>0] Pr [delay>t| delay>0] Where P[delay>t| delay>0]= e(-(C-A)t/H) Pr[delay>t] = Pr [delay>0] e(-(C-A)t/H) where C = total number of channels, t =delay time of interest, H=average duration of call 61
- 62. Trunking Efficiency Trunking efficiency is a measure of the number of users which can be offered a particular GOS with a particular configuration of fixed channels. The way in which channels are grouped can substantially alter the number of users handled by a trunked system. Example: 10 trunked channels at a GOS of 0.01 can support 4.46 Erlangs, where as two groups of 5 trunked channels can support 2x1.36=2.72 Erlangs of traffic 10 trunked channels can offer 60% more traffic at a specific GOS than two 5 channel trunks. Therefore, if in a certain situation we sub-divide the total channels in a cell into smaller channel groups then the total carried traffic will reduce with increasing number of groups 62
- 63. Erlang B Trunking GOS 63
- 64. Improving Capacity As demand for service increases, system designers have to provide more channel per unit coverage area Common Techniques are: Cell Splitting, Sectoring and Microcell Zoning Cell Splitting increases the number of BS deployed and allows an orderly growth of the cellular system Sectoring uses directional antennas to further control interference Micro cell Zoning distributes the coverage of cell and extends the cell boundary to hard-to-reach areas 64
- 65. Cell Splitting Cell splitting is the process of subdividing a congested cell into smaller cells with their own BS a corresponding reduction in antenna height a corresponding reduction in transmit power Splitting the cell reduces the cell size and thus more number of cells have to be used For the new cells to be smaller in size the transmit power of these cells must be reduced. Idea is to keep Q=D/R constant while decreasing R More number of cells ► more number of clusters ► more channels ►high capacity 65
- 66. Cells are split to add channels with no new spectrum usage
- 67. Example S/I cluster size N=4 (choices 4,7,12) path loss exponent (means) n=4 co-channel reuse ratio Q= sqrt(3N)=3.464102 Ratio of distance to radius Q=D/R=3.464102 number of neighboring cells io=6 ,# of sides of hexagon signal to interference ratio S/I= (D/R)^n / io =24 convert to dB, S/I= 10log(S/I)=13.80211dB S/I is less than required, it will not work! cluster size N=7 path loss exponent n=3 Q=sqrt(3N)=4.582576 number of neighboring cells io= 6, # of sides of hexagon signal to interference ratio=S/I= (D/R)^n / io =73.334 convert to dB, S/I=10log(S/I)=18.65dB S/I is less than required, it will work! 67
- 68. Cell Splitting-Power Issues Suppose the cell radius of new cells is reduced by half What is the required transmit power for these new cells?? Pr[at old cell boundary]=Pt1R-n Pr[at new cell boundary]= Pt2(R/2) –n where Pt1and Pt2are the transmit powers of the larger and smaller cell base stations respectively, and n is the path loss exponent. So, Pt2= Pt1/2n If we take n=3 and the received powers equal to each other, then Pt2=Pt1/8 In other words, the transmit power must be reduced by 9dB in order to fill in the original coverage area while maintaining the S/I requirement 68
- 69. Illustration of cell splitting in 3x3 square centered around base station A 69
- 70. Cell Splitting In practice not all the cells are split at the same time hence different size cells will exist simultaneously. In such situations, special care needs to be taken to keep the distance between co-channel cells at the required minimum, and hence channel assignments become more complicated. To overcome handoff problem: Channels in the old cell must be broken down into two channel groups, one for smaller cell and other for larger cell The larger cell is usually dedicated to high speed traffic so that handoffs occur less frequently At start small power group has less channels and large power group has large no of channels, at maturity of the system large power group does not have any channel 70
- 72. 72
- 73. Sectoring In this approach first SIR is improved using directional antennas, capacity improvement is achieved by reducing the number of cells in a cluster thus increasing frequency reuse The CCI decreased by replacing the single omni-directional antenna by several directional antennas, each radiating within a specified sector 73
- 74. Sectoring A directional antenna transmits to and receives from only a fraction of total of the co-channel cells. Thus CCI is reduced 74
- 75. Problems with Sectoring Increases the number of antennas at each BS Decrease in trunking efficiency due to sectoring(dividing the bigger pool of channels into smaller groups) Increase number of handoffs(sector-to sector) Good news:Many modern BS support sectoring and related handoff without help of MSC 75
- 76. Microcell Zone Concept The Problems of sectoring can be addressed by Microcell Zone Concept A cell is conceptually divided into microcells or zones Each microcell(zone) is connected to the same base station(fiber/microwave link) Doing something in middle of cell splitting and sectoring by extracting good points of both Each zone uses a directional antenna Each zone radiates power into the cell. MS is served by strongest zone As mobile travels from one zone to another, it retains the same channel, i.e. no hand off The BS simply switches the channel to the next zone site 76
- 77. Micro Zone Cell Concept 77
- 78. Microcell Zone Concept Reduced Interference (Zone radius is small so small and directional antennas are used). Decrease in CCI improves the signal quality and capacity. No loss in trunking efficiency (all channels are used by all cells). No extra handoffs. Increase in capacity (since smaller cluster size can be used). 78
- 79. Repeaters for Range Extension Useful for hard to reach areas Buildings Tunnels Valleys Radio transmitters called Repeaters can be used to provide coverage in these area Repeaters are bi-directional Rx signals from BS Amplify the signals Re-radiate the signals Received noise and interference is also re-radiated 79