Chap003
- 1. Describing Data: Numerical Measures Chapter 3 McGraw-Hill/Irwin Copyright © 2012 by The McGraw-Hill Companies, Inc. All rights reserved.
- 2. Learning Objectives LO1 Explain the concept of central tendency. LO2 Identify and compute the arithmetic mean. LO3 Compute and interpret the weighted mean. LO4 Determine the median. LO5 Identify the mode. LO6 Calculate the geometric mean. LO7 Explain and apply measures of dispersion. LO8 Compute and interpret the standard deviation. LO9 Explain Chebyshev’s Theorem and the Empirical Rule. L10 Compute the mean and standard deviation of grouped data. 3-2
- 3. LO1 Explain the concept of central tendency Central Tendency - Measures of Location The purpose of a measure of location is to pinpoint the center of a distribution of data. There are many measures of location. We will consider five: 1. The arithmetic mean, 2. The weighted mean, 3. The median, 4. The mode, and 5. The geometric mean 3-3
- 4. LO2 Identify and compute the arithmetic mean. Characteristics of the Mean The arithmetic mean is the most widely used measure of location. Requires the interval scale. Major characteristics: All values are used. It is unique. The sum of the deviations from the mean is 0. It is calculated by summing the values and dividing by the number of values. 3-4
- 5. LO2 Population Mean For ungrouped data, the population mean is the sum of all the population values divided by the total number of population values: 3-5
- 6. LO2 EXAMPLE – Population Mean There are 42 exits on I-75 through the state of Kentucky. Listed below are the distances between exits (in miles). Why is this information a population? What is the mean number of miles between exits? 3-6
- 7. LO2 EXAMPLE – Population Mean There are 42 exits on I-75 through the state of Kentucky. Listed below are the distances between exits (in miles). Why is this information a population? This is a population because we are considering all the exits in Kentucky. What is the mean number of miles between exits? 3-7
- 8. LO2 Parameter Versus Statistics PARAMETER A measurable characteristic of a population. STATISTIC A measurable characteristic of a sample. 3-8
- 9. LO2 Properties of the Arithmetic Mean 1. Every set of interval-level and ratio-level data has a mean. 2. All the values are included in computing the mean. 3. The mean is unique. 4. The sum of the deviations of each value from the mean is zero. 3-9
- 10. LO2 Sample Mean For ungrouped data, the sample mean is the sum of all the sample values divided by the number of sample values: 3-10
- 11. LO2 EXAMPLE – Sample Mean 3-11
- 12. LO3 Compute and interpret the weighted mean Weighted Mean The weighted mean of a set of numbers X1, X2, ..., Xn, with corresponding weights w1, w2, ...,wn, is computed from the following formula: 3-12
- 13. LO3 EXAMPLE – Weighted Mean The Carter Construction Company pays its hourly employees $16.50, $19.00, or $25.00 per hour. There are 26 hourly employees, 14 of which are paid at the $16.50 rate, 10 at the $19.00 rate, and 2 at the $25.00 rate. What is the mean hourly rate paid the 26 employees? 3-13
- 14. LO4 Determine the median. The Median MEDIAN The midpoint of the values after they have been ordered from the smallest to the largest, or the largest to the smallest. PROPERTIES OF THE MEDIAN 1. There is a unique median for each data set. 2. It is not affected by extremely large or small values and is therefore a valuable measure of central tendency when such values occur. 3. It can be computed for ratio-level, interval-level, and ordinal- level data. 4. It can be computed for an open-ended frequency distribution if the median does not lie in an open-ended class. 3-14
- 15. LO4 EXAMPLES - Median The ages for a sample The heights of four of five college students basketball players, in are: inches, are: 21, 25, 19, 20, 22 76, 73, 80, 75 Arranging the data in Arranging the data in ascending order gives: ascending order gives: 19, 20, 21, 22, 25. 73, 75, 76, 80. Thus the median is 21. Thus the median is 75.5 3-15
- 16. LO5 Identify the mode. The Mode MODE The value of the observation that appears most frequently. 3-16
- 17. LO5 Example - Mode Using the data regarding the distance in miles between exits on I-75 through Kentucky. The information is repeated below. What is the modal distance? Organize the distances into a frequency table. 3-17
- 18. LO2,4,5 The Relative Positions of the Mean, Median and the Mode 3-18
- 19. LO6 Calculate the geometric mean. The Geometric Mean Useful in finding the average change of percentages, ratios, indexes, or growth rates over time. It has a wide application in business and economics because we are often interested in finding the percentage changes in sales, salaries, or economic figures, such as the GDP, which compound or build on each other. The geometric mean will always be less than or equal to the arithmetic mean. The formula for the geometric mean is written: EXAMPLE: The return on investment earned by Atkins Construction Company for four successive years was: 30 percent, 20 percent, -40 percent, and 200 percent. What is the geometric mean rate of return on investment? 3-19
- 20. LO6 The Geometric Mean – Finding an Average Percent Change Over Time EXAMPLE During the decade of the 1990s, and into the 2000s, Las Vegas, Nevada, was the fastest-growing city in the United States. The population increased from 258,295 in 1990 to 607,876 in 2009. This is an increase of 349,581 people, or a 135.3 percent increase over the period. The population has more than doubled. What is the average annual increase? 3-20
- 21. LO7 Explain and apply measures of dispersion. Dispersion A measure of location, such as the mean or the median, only describes the center of the data. It is valuable from that standpoint, but it does not tell us anything about the spread of the data. For example, if your nature guide told you that the river ahead averaged 3 feet in depth, would you want to wade across on foot without additional information? Probably not. You would want to know something about the variation in the depth. A second reason for studying the dispersion in a set of data is to compare the spread in two or more distributions. 3-21
- 22. LO7 Measures of Dispersion Range Mean Deviation Variance and Standard Deviation 3-22
- 23. LO7 EXAMPLE – Range The number of cappuccinos sold at the Starbucks location in the Orange Country Airport between 4 and 7 p.m. for a sample of 5 days last year were 20, 40, 50, 60, and 80. Determine the range for the number of cappuccinos sold. Range = Largest – Smallest value = 80 – 20 = 60 3-23
- 24. LO7 Mean Deviation MEAN DEVIATION The arithmetic mean of the absolute values of the deviations from the arithmetic mean. A shortcoming of the range is that it is based on only two values, the highest and the lowest; it does not take into consideration all of the values. The mean deviation does. It measures the mean amount by which the values in a population, or sample, vary from their mean 3-24
- 25. LO7 EXAMPLE – Mean Deviation The number of cappuccinos sold at the Starbucks location in the Orange Country Airport between 4 and 7 p.m. for a sample of 5 days last year were 20, 40, 50, 60, and 80. Determine the mean deviation for the number of cappuccinos sold. Step 1: Compute the mean x 20 40 50 60 80 x 50 n 5 3-25
- 26. LO7 EXAMPLE – Mean Deviation Step 2: Subtract the mean (50) from each of the observations, convert to positive if difference is negative Step 3: Sum the absolute differences found in step 2 then divide by the number of observations 3-26
- 27. LO8 Compute and interpret the standard deviation. Variance and Standard Deviation VARIANCE The arithmetic mean of the squared deviations from the mean. STANDARD DEVIATION The square root of the variance. The variance and standard deviations are nonnegative and are zero only if all observations are the same. For populations whose values are near the mean, the variance and standard deviation will be small. For populations whose values are dispersed from the mean, the population variance and standard deviation will be large. The variance overcomes the weakness of the range by using all the values in the population 3-27
- 28. LO8 Variance – Formula and Computation Steps in Computing the Variance. Step 1: Find the mean. Step 2: Find the difference between each observation and the mean, and square that difference. Step 3: Sum all the squared differences found in step 2 Step 4: Divide the sum of the squared differences by the number of items in the population. 3-28
- 29. LO8 EXAMPLE – Variance and Standard Deviation The number of traffic citations issued during the last five months in Beaufort County, South Carolina, is reported below: What is the population variance? Step 1: Find the mean. x 19 17 ... 34 10 348 29 N 12 12 Step 2: Find the difference between each observation and the mean, and square that difference. Step 3: Sum all the squared differences found in step 3 Step 4: Divide the sum of the squared differences by the number of items in the population. 3-29
- 30. LO8 EXAMPLE – Variance and Standard Deviation The number of traffic citations issued during the last twelve months in Beaufort County, South Carolina, is reported below: What is the population variance? Step 2: Find the difference between each observation and the mean, and square that difference. Step 3: Sum all the squared differences found in step 3 Step 4: Divide the sum of the squared differences by the number of items in the population. 2 (X )2 1,488 124 N 12 3-30
- 31. LO8 Sample Variance Where : s 2 is the sample variance X is the value of each observation in the sample X is the mean of the sample n is the number of observations in the sample 3-31
- 32. LO8 EXAMPLE – Sample Variance The hourly wages for a sample of part-time employees at Home Depot are: $12, $20, $16, $18, and $19. What is the sample variance? 3-32
- 33. LO8 Sample Standard Deviation Where : s 2 is the sample variance X is the value of each observation in the sample X is the mean of the sample n is the number of observations in the sample 3-33
- 34. LO9 Explain Chebyshev’s Theorem and the Empirical Rule. Chebyshev’s Theorem The arithmetic mean biweekly amount contributed by the Dupree Paint employees to the company’s profit-sharing plan is $51.54, and the standard deviation is $7.51. At least what percent of the contributions lie within plus 3.5 standard deviations and minus 3.5 standard deviations of the mean? 3-34
- 35. LO9 The Empirical Rule 3-35
- 36. LO10 Compute the mean and standard deviation of grouped data. The Arithmetic Mean of Grouped Data 3-36
- 37. LO10 The Arithmetic Mean of Grouped Data - Example Recall in Chapter 2, we constructed a frequency distribution for Applewood Auto Group profit data for 180 vehicles sold. The information is repeated on the table. Determine the arithmetic mean profit per vehicle. 3-37
- 38. LO10 The Arithmetic Mean of Grouped Data - Example 3-38
- 39. LO10 Standard Deviation of Grouped Data - Example Refer to the frequency distribution for the Applewood Auto Group data used earlier. Compute the standard deviation of the vehicle profits. 3-39
Editor's Notes
- #9: .