CCNAv5 - S4: Chapter 5: Network Address Translation for ipv4

© 2008 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialPresentation_ID 1
Chapter 5: Network
Address Translation for
IPv4
Connecting Networks

Presentation_ID 2© 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential
Chapter 5
5.1 NAT Operation
5.2 Configuring NAT
5.3 Troubleshooting NAT
5.4 Summary

Chapter 5: Objectives
 Describe NAT characteristics.
 Describe the benefits and drawbacks of NAT.
 Configure static NAT using the CLI.
 Configure dynamic NAT using the CLI.
 Configure PAT using the CLI.
 Configure port forwarding using the CLI.
 Configure NAT64.
 Use show commands to verify NAT operation.

5.1 NAT Operation

NAT Characteristics
IPv4 Private Address Space
 IPv4 address space is not big enough to uniquely address all the
devices that must be connected to the Internet.
 Network private addresses are described in RFC 1918 and are to
designed to be used within an organization or site only.
 Private addresses are not routed by Internet routers while public
addresses are.
 Private addresses can alleviate IPv4 scarcity, but because they aren’t
routed by Internet devices, they first need to be translated.
 NAT is process used to perform such translation.

NAT Characteristics
IPv4 Private Address Space

NAT Characteristics
What is NAT?
 NAT is a process used to translate network addresses.
 NAT’s primary use is to conserve public IPv4 addresses.
 NAT is usually implemented at border network devices, such as
firewalls or routers.
 NAT allows the networks to use private addresses internally, only
translating to public addresses when needed.
 Devices within the organization can be assigned private addresses
and operate with locally unique addresses.
 When traffic must be sent or received to or from other organizations
or the Internet, the border router translates the addresses to a public
and globally unique address.

NAT Characteristics
What is NAT? (cont.)

NAT Characteristics
NAT Terminology
 Inside network is the set of
devices using private
addresses
 Outside network refers to all
other networks
 NAT includes four types of
addresses:
• Inside local address
• Inside global address
• Outside local address
• Outside global address

NAT Characteristics
NAT Terminology (cont.)

Types of NAT
Static NAT
 Static NAT uses a one-to-one mapping of local and global addresses.
 These mappings are configured by the network administrator and
remain constant.
 Static NAT is particularly useful when servers hosted in the inside
network must be accessible from the outside network.
 A network administrator can SSH to a server in the inside network by
pointing the SSH client to the proper inside global address.

Types of NAT
Static NAT (cont.)

Types of NAT
Dynamic NAT
 Dynamic NAT uses a pool of public addresses and assigns them on a
first-come, first-served basis.
 When an inside device requests access to an outside network,
dynamic NAT assigns an available public IPv4 address from the pool.
 Dynamic NAT requires that enough public addresses are available to
satisfy the total number of simultaneous user sessions.

Types of NAT
Dynamic NAT (cont.)

Types of NAT
Port Address Translation
 Port Address Translation (PAT) maps multiple private IPv4
addresses to a single public IPv4 address or a few addresses.
 PAT uses the pair source port and source IP address to keep track
of what traffic belongs to what internal client.
 PAT is also known as NAT overload.
 By also using the port number, PAT forwards the response packets
to the correct internal device.
 The PAT process also validates that the incoming packets were
requested, thus adding a degree of security to the session.

Types of NAT
Comparing NAT and PAT
 NAT translates IPv4 addresses on a 1:1 basis between private IPv4
addresses and public IPv4 addresses.
 PAT modifies both the address and the port number.
 NAT forwards incoming packets to their inside destination by referring
to the incoming source IPv4 address provided by the host on the
public network.
 With PAT, there is generally only one or a very few publicly exposed
IPv4 addresses.
 PAT is able to translate protocols that do not use port numbers, such
as ICMP; each one of these protocols is supported differently by
PAT.

Benefits of NAT
Benefits of NAT
 Conserves the legally registered addressing scheme
 Increases the flexibility of connections to the public network
 Provides consistency for internal network addressing schemes
 Provides network security

Benefits of NAT
Disadvantages of NAT
 Performance is degraded
 End-to-end functionality is degraded
 End-to-end IP traceability is lost
 Tunneling is more complicated
 Initiating TCP connections can be disrupted

5.2 Configuring NAT

Configuring Static NAT
There are two basic tasks to perform when configuring
static NAT translations:
 Create the mapping between the inside local and
outside local addresses.
 Define which interfaces belong to the inside network
and which belong to the outside network.

Analyzing Static NAT

Verifying Static NAT

Verifying Static NAT (cont.)

Configuring Dynamic NAT
Dynamic NAT Operation
 The pool of public IPv4 addresses (inside global address pool) is
available to any device on the inside network on a first-come, first-
served basis.
 With dynamic NAT, a single inside address is translated to a single
outside address.
 The pool must be large enough to accommodate all inside devices.
 A device is unable to communicate to any external networks if no
addresses are available in the pool.

Analyzing Dynamic NAT

Verifying Dynamic NAT

Configuring PAT
Configuring PAT: Address Pool

Configuring PAT
Configuring PAT: Single Address

Configuring PAT
Analyzing PAT

Configuring PAT
Verifying PAT Translations

Port Forwarding
Port Forwarding
 Port forwarding is the act of forwarding a network port from one
network node to another.
 A packet sent to the public IP address and port of a router can be
forwarded to a private IP address and port in inside network.
 Port forwarding is helpful in situations where servers have private
addresses, not reachable from the outside networks.

Port Forwarding
SOHO Example

Port Forwarding
Configuring Port Forwarding with IOS
In IOS, Port forwarding is essentially a static NAT translation with a
specified TCP or UDP port number.

Configuring NAT and IPv6
NAT for IPv6?
 NAT is a workaround for IPv4 address scarcity.
 IPv6 with a 128-bit address provides 340 undecillion addresses.
 Address space is not an issue for IPv6.
 IPv6 makes IPv4 public-private NAT unnecessary by design;
however, IPv6 does implement a form of private addresses, and it
is implemented differently than they are for IPv4.

IPv6 Unique Local Addresses
 IPv6 unique local addresses (ULAs) are designed to allow IPv6
communications within a local site.
 ULAs are not meant to provide additional IPv6 address space.
 ULAs have the prefix FC00::/7, which results in a first hextet range
of FC00 to FDFF.
 ULAs are also known as local IPv6 addresses (not to be confused
with IPv6 link-local addresses).

NAT for IPv6
 IPv6 also uses NAT, but in a much different context.
 In IPv6, NAT is used to provide transparent communication
between IPv6 and IPv4.
 NAT64 is not intended to be a permanent solution; it is meant to be
a transition mechanism.
 Network Address Translation-Protocol Translation (NAT-PT) was
another NAT-based transition mechanism for IPv6, but is now
deprecated by IETF.
 NAT64 is now recommended.

NAT for IPv6

5.3 Troubleshooting NAT

Troubleshooting NAT: show commands

Troubleshooting NAT: debug command

Chapter 5: Summary
This chapter has outlined:
 How NAT is used to help alleviate the depletion of the IPv4 address
space.
 NAT conserves public address space and saves considerable
administrative overhead in managing adds, moves, and changes.
 NAT for IPv4, including:
• NAT characteristics, terminology, and general operations
• Different types of NAT, including static NAT, dynamic NAT, and
NAT with overloading
• Benefits and disadvantages of NAT
 The configuration, verification, and analysis of static NAT, dynamic
NAT, and NAT with overloading.

Chapter 5: Summary (cont.)
 How port forwarding can be used to access an internal devices from
the Internet.
 Troubleshooting NAT using show and debug commands.
 How NAT for IPv6 is used to translate between IPv6 addresses and
IPv4 addresses.

CCNAv5 - S4: Chapter 5: Network Address Translation for ipv4

More Related Content

What's hot (20)

Similar to CCNAv5 - S4: Chapter 5: Network Address Translation for ipv4 (20)

More from Vuz Dở Hơi (20)

Recently uploaded (20)

CCNAv5 - S4: Chapter 5: Network Address Translation for ipv4