CCNA 1 Routing and Switching v5.0 Chapter 10

Chapter 10:
Application Layer
Introduction to Networks
© 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 1

Chapter 10: Objectives
By the end of this chapter, you will be able to:
 Explain how the functions of the application layer, session layer,
and presentation layer work together to provide network services to
end user applications.
 Describe how common application layer protocols interact with end
user applications.
 Describe, at a high level, common application layer protocols that
provide Internet services to end-users, including WWW services
and email.
 Describe application layer protocols that provide IP addressing
services, including DNS and DHCP.
 Describe the features and operation of well-known application layer
protocols that allow for file sharing services, including: FTP, File
Sharing Services, SMB protocol.
 Explain how data is moved across the network, from opening an
application to receiving data.
Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 2

Chapter 10
10.0 Introduction
10.1 Application Layer Protocols
10.2 Well-Known Application Layer Protocols and Service
10.3 The Message Heard Around the World
10.4 Summary

10.1 Application Layer
Protocols

Application, Session and Presentation
OSI and TCP/IP Models Revisited
The key parallels are in the transport and network layer.

Application Session and Presentation
Application Layer

Presentation and Session Layers
 Presentation layer
 Coding and conversion of application layer data
 Data compression
 Data encryption for the transmission and decryption of
data upon receipt by the destination
 Session layer
 Functions, creates, and maintains dialogs between source
and destination applications
 Handles the exchange of information to initiate dialogs,
keep them active, and to restart sessions

Presentation and Session Layers (cont.)

TCP/IP Application Layer Protocols
 Domain Name Service Protocol (DNS) – used to resolve Internet
names to IP addresses
 Telnet – a terminal emulation protocol used to provide remote access
to servers and networking devices
 Bootstrap Protocol (BOOTP) – a precursor to the DHCP protocol, a
network protocol used to obtain IP address information during bootup
 Dynamic Host Control Protocol (DHCP) – used to assign an IP
address, subnet mask, default gateway and DNS server to a host
 Hypertext Transfer Protocol (HTTP) – used to transfer files that
make up the Web pages of the World Wide Web

TCP/IP Application Layer Protocols (cont.)
 File Transfer Protocol (FTP) - used for interactive file transfer
between systems
 Trivial File Transfer Protocol (TFTP) - used for connectionless
active file transfer
 Simple Mail Transfer Protocol (SMTP) - used for the transfer of
mail messages and attachments
 Post Office Protocol (POP) - used by email clients to retrieve email
from a remote server
 Internet Message Access Protocol (IMAP) – another protocol for
email retrieval

How Application Protocols Interact with End-User Applications
Peer-to-Peer Networks
Both devices are considered equal in the communication.
The roles of client and server are set on a per request basis.

Peer-to-Peer Applications
Client and server in the same communication.
Both can initiate a communication and are considered
equal in the communication process.

Common P2P Applications
 With P2P applications, each computer in the network running the
application can act as a client or a server for the other computers in
the network running the application.
 Common P2P applications include:
 eDonkey
 eMule
 Shareaza
 BitTorrent
 Bitcoin
 LionShare
 Some P2P applications are based on the Gnutella protocol which
enables people to share files on their hard disks with others

Client-Server Model

10.2 Well-Known
Application Layer
Protocols and Services

Common Application Layer Protocols
Application Layer Protocols Revisited
Three application layer protocols involved in everyday work or play
include:
 HTTP to browse the web.
 Simple Mail Transfer Protocol (SMTP) to enable users to send email.
 Post Office Protocol (POP) to enable users to receive email.

Hypertext Transfer Protocol and Hypertext
Markup Language
Example URL: http://www.cisco.com/index.html
1. First, the browser interprets the three parts of the URL:
 http (the protocol or scheme)
 www.cisco.com (the server name)
 index.html (the specific file name requested)
2. Browser checks with a name server to convert www.cisco.com into
a numeric address
3. Using the HTTP protocol requirements sends a GET request to the
server and asks for the file index.html
4. Server sends the HTML code for this web page
5. Browser deciphers the HTML code and formats the page

HTTP and HTTPS
 Developed to publish and retrieve HTML pages
 Used for data transfer
 Specifies a request/response protocol
 Three common message types are GET, POST, and PUT
 GET is a client request for data
 POST and PUT are used to send messages that upload data to the
web server

SMTP, POP, and IMAP
 Typically use an application
called a Mail User Agent
(email client)
 Allows messages to be sent
 Places received messages
into the client's mailbox
 SMTP - Send email from
either a client or a server
 POP - Receive email
messages from an email
server
 IMAP - Internet Message
Access Protocol
 Email client provides the
functionality of both
protocols within one
application

SMTP, POP, and IMAP (cont.)

Simple Mail Transfer Protocol (SMTP)
 transfers mail
 message must be formatted properly
 SMTP processes must be running on both the client and server
 message header must have a properly formatted recipient email
address and a sender
 uses port 25
Post Office Protocol (POP)
 enables a workstation to retrieve mail from a mail server
 mail is downloaded from the server to the client and then deleted on
the server
 uses port 110
 POP does not store messages
 POP3 is desirable for an ISP, because it alleviates their responsibility
for managing large amounts of storage for their email servers

Everyday Application Layer Protocols
 MDA accepts a piece of email from MTA and performs the actual
delivery.
 MDA receives all the inbound mail from the MTA and places it into
mailboxes.
 MDA can also resolve final delivery issues, such as virus scanning,
spam filtering, and return-receipt handling.

Simple Mail Transfer Protocol (SMTP)
 Transfers mail reliably and efficiently
Post Office Protocol (POP)
 Enables a workstation to retrieve mail from a mail server
 With POP, mail is downloaded from the server to the client and then
deleted on the server
Internet Message Access Protocol (IMAP)
 Another protocol that to retrieves email messages
 Unlike POP, when the user connects to an IMAP-capable server,
copies of the messages are downloaded to the client application
 Original messages are kept on the server until manually deleted

Providing IP Addressing Services
Domain Name Service
A human legible
name is resolved
to its numeric
network device
address by the
DNS protocol.

Domain Name Service (cont.)
A human legible
name is resolved
to its numeric
network device
address by the
DNS protocol.

Domain Name Service (cont.)

DNS Message Format
 DNS server stores different types of resource records used to resolve
names
 Contains the name, address, and type of record.
 Record types are:
 A – An end device address
 NS – An authoritative name server
 CNAME – The canonical name for an alias; used when multiple
services have the single network address, but each service has its
own entry in DNS
 MX – Mail exchange record; maps a domain name to a list of mail
exchange servers
 Unable to resolve the name using its stored records, contacts other
servers.
 Server temporarily stores the numbered address that matches the name
in cache memory.
 Windows ipconfig /displaydns displays all cached DNS.

DNS Hierarchy
Examples top-level
domains:
.au - Australia
.co - Colombia
.com - business
or industry
.jp - Japan
.org - non-profit
organization

nslookup
 Operating system utility called nslookup allows the user to manually
query the name servers to resolve a given host name
 Utility can be used to troubleshoot name resolution issues and to verify
the current status of the name servers

Dynamic Host Configuration Protocol
 DHCP allows a host to obtain an IP address dynamically.
 DHCP server is contacted and address requested - chooses address
from a configured range of addresses called a pool and “leases” it to
the host for a set period.
 DHCP used for general purpose hosts such as end user devices,
and static addressing is used for network devices such as gateways,
switches, servers and printers.

Dynamic Host Configuration Protocol (cont.)

DHCP Operation

Providing File Sharing Services
File Transfer Protocol
 FTP allow data transfers between a client and a server.
 FTP client is an application that runs on a computer that is used to
push and pull data from a server running an FTP daemon.
 To successfully transfer data, FTP requires two connections between
the client and the server, one for commands and replies, the other for
the actual file transfer.

File Transfer Protocol (cont.)

Server Message Block
 Clients establish
a long term
connection to
servers.
 After the
connection is
established, the
user can access
the resources on
the server as if
the resource is
local to the client
host.
SMB is a client-server, request-response protocol. Servers
can make their resources available to clients on the network.

Server Message Block (cont.)
A file may be copied from PC to PC with Windows
Explorer using the SMB protocol.

10.3 The Message Heard
Around the World

Move It!
The Internet of Things

Move It!
Message Travels Through a Network

Move It!
Message Travels Through a Network (cont.)

Move It!
Getting the Data to the End Device

Move It!
Getting the Data through the Internetwork

Move It!
Getting the Data to the Right Application
At the end device, the service port number directs the data to
the correct conversation.

Application Layer
Summary
 Applications are computer programs with which the user interacts and
which initiate the data transfer process at the user’s request.
 Services are background programs that provide the connection
between the application layer and the lower layers of the networking
model.
 Protocols provide a structure of agreed-upon rules and processes that
ensure services running on one particular device can send and receive
data from a range of different network devices.
 HTTP supports the delivery of web pages to end devices.
 SMTP, POP, and IMAP support sending and receiving email.

Application Layer
Summary
 SMB and FTP enable users to share files.
 P2P applications make it easier for consumers to seamlessly share
media.
 DNS resolves the human legible names used to refer to network
resources into numeric addresses usable by the network
 All of these elements work together, at the application layer.
 The application layer enables users to work and play over the
Internet.

CCNA 1 Routing and Switching v5.0 Chapter 10

More Related Content

What's hot (20)

Viewers also liked (13)

Similar to CCNA 1 Routing and Switching v5.0 Chapter 10 (20)

Recently uploaded (20)

CCNA 1 Routing and Switching v5.0 Chapter 10