Chapter_5_CN Link Layer.ppt

Chapter 5
Link Layer
Computer
Networking: A
Top Down
Approach
6th edition
Jim Kurose, Keith Ross
Addison-Wesley
March 2012
A note on the use of these ppt slides:
We’re making these slides freely available to all (faculty, students, readers).
They’re in PowerPoint form so you see the animations; and can add, modify,
and delete slides (including this one) and slide content to suit your needs.
They obviously represent a lot of work on our part. In return for use, we only
ask the following:
 If you use these slides (e.g., in a class) that you mention their source
(after all, we’d like people to use our book!)
 If you post any slides on a www site, that you note that they are adapted
from (or perhaps identical to) our slides, and note our copyright of this
material.
Thanks and enjoy! JFK/KWR
All material copyright 1996-2012
J.F Kurose and K.W. Ross, All Rights Reserved
Link Layer 5-1

Link Layer 5-2
Chapter 5: Link layer
our goals:
 understand principles behind link layer
services:
 error detection, correction
 sharing a broadcast channel: multiple access
 link layer addressing
 local area networks: Ethernet, VLANs
 instantiation, implementation of various
link layer technologies

Link Layer 5-3
Link layer, LANs: outline
5.1 introduction,
services
5.2 error detection,
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
5.5 link virtualization:
MPLS
5.6 data center
networking
5.7 a day in the life of a
web request

Link Layer 5-4
Link layer: introduction
terminology:
 hosts and routers: nodes
 communication channels
that connect adjacent
nodes along
communication path: links
 wired links
 wireless links
 LANs
 layer-2 packet: frame,
encapsulates datagram
data-link layer has responsibility of
transferring datagram from one node
to physically adjacent node over a link
global ISP

Link Layer 5-5
Link layer: context
 datagram transferred by
different link protocols
over different links:
 e.g., Ethernet on first
link, frame relay on
intermediate links,
802.11 on last link
 each link protocol
provides different services
 e.g., may or may not
provide rdt over link
transportation analogy:
 trip from Princeton to Lausanne
 limo: Princeton to JFK
 plane: JFK to Geneva
 train: Geneva to Lausanne
 tourist = datagram
 transport segment =
communication link
 transportation mode = link
layer protocol
 travel agent = routing
algorithm

Link Layer 5-6
Link layer services
 framing, link access:
 encapsulate datagram into frame, adding header,
trailer
 channel access if shared medium
 “MAC” addresses used in frame headers to
identify source, dest
• different from IP address!
 reliable delivery between adjacent nodes
 we learned how to do this already (chapter 3)!
 seldom used on low bit-error link (fiber, some
twisted pair)
 wireless links: high error rates
• Q: why both link-level and end-end reliability?

Link Layer 5-7
 flow control:
 pacing between adjacent sending and receiving nodes
 error detection:
 errors caused by signal attenuation, noise.
 receiver detects presence of errors:
• signals sender for retransmission or drops frame
 error correction:
 receiver identifies and corrects bit error(s) without resorting
to retransmission
 half-duplex and full-duplex
 with half duplex, nodes at both ends of link can transmit, but
not at same time
Link layer services
(more)

Link Layer 5-8
Where is the link layer
implemented?
 in each and every host
 link layer implemented in
“adaptor” (aka network
interface card NIC) or on
a chip
 Ethernet card, 802.11
card; Ethernet chipset
 implements link,
physical layer
 attaches into host’s
system buses
 combination of hardware,
software, firmware
controller
physical
transmission
cpu memory
host
bus
(e.g., PCI)
network adapter
card
application
transport
network
link
link
physical

Link Layer 5-9
Adaptors communicating
 sending side:
 encapsulates
datagram in frame
 adds error checking
bits, rdt, flow control,
etc.
 receiving side
 looks for errors, rdt,
flow control, etc
 extracts datagram,
passes to upper layer
at receiving side
controller controller
sending host receiving host
datagram datagram
datagram
frame

Link Layer 5-10
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-11
Error detection
EDC= Error Detection and Correction bits (redundancy)
D = Data protected by error checking, may include header fields
• Error detection not 100% reliable!
• protocol may miss some errors, but rarely
• larger EDC field yields better detection and correction
otherwise

Link Layer 5-12
Parity checking
single bit parity:
 detect single bit
errors
two-dimensional bit parity:
 detect and correct single bit errors
0 0

Link Layer 5-13
Internet checksum (review)
sender:
 treat segment contents
as sequence of 16-bit
integers
 checksum: addition
(1’s complement sum)
of segment contents
 sender puts checksum
value into UDP
checksum field
receiver:
 compute checksum of
received segment
 check if computed
checksum equals
checksum field value:
 NO - error detected
 YES - no error
detected. But maybe
errors nonetheless?
goal: detect “errors” (e.g., flipped bits) in transmitted
packet (note: used at transport layer only)

Link Layer 5-14
Cyclic redundancy check
 more powerful error-detection coding
 view data bits, D, as a binary number
 choose r+1 bit pattern (generator), G
 goal: choose r CRC bits, R, such that
 <D,R> exactly divisible by G (modulo 2)
 receiver knows G, divides <D,R> by G. If non-zero
remainder: error detected!
 can detect all burst errors less than r+1 bits
 widely used in practice (Ethernet, 802.11 WiFi, ATM)

Link Layer 5-15
CRC example
want:
D.2r XOR R = nG
equivalently:
D.2r = nG XOR R
equivalently:
if we divide D.2r by
G, want remainder
R to satisfy:
R = remainder[ ]
D.2r
G

Link Layer 5-16
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-17
Multiple access links, protocols
two types of “links”:
 point-to-point
 PPP for dial-up access
 point-to-point link between Ethernet switch, host
 broadcast (shared wire or medium)
 old-fashioned Ethernet
 upstream HFC
 802.11 wireless LAN
shared wire (e.g.,
cabled Ethernet)
shared RF
(e.g., 802.11 WiFi)
shared RF
(satellite)
humans at a
cocktail party
(shared air, acoustical)

Link Layer 5-18
Multiple access protocols
 single shared broadcast channel
 two or more simultaneous transmissions by nodes:
interference
 collision if node receives two or more signals at the
same time
multiple access protocol
 distributed algorithm that determines how nodes share
channel, i.e., determine when node can transmit
 communication about channel sharing must use channel
itself!
 no out-of-band channel for coordination

Link Layer 5-19
An ideal multiple access protocol
given: broadcast channel of rate R bps
desiderata:
1. when one node wants to transmit, it can send at rate
R.
2. when M nodes want to transmit, each can send at
average rate R/M
3. fully decentralized:
• no special node to coordinate transmissions
• no synchronization of clocks, slots
4. simple

Link Layer 5-20
MAC protocols: taxonomy
three broad classes:
 channel partitioning
 divide channel into smaller “pieces” (time slots, frequency,
code)
 allocate piece to node for exclusive use
 random access
 channel not divided, allow collisions
 “recover” from collisions
 “taking turns”
 nodes take turns, but nodes with more to send can take
longer turns

Link Layer 5-21
Channel partitioning MAC protocols:
TDMA
TDMA: time division multiple access
 access to channel in "rounds"
 each station gets fixed length slot (length =
pkt trans time) in each round
 unused slots go idle
 example: 6-station LAN, 1,3,4 have pkt, slots
2,5,6 idle
1 3 4 1 3 4
6-slot
frame
6-slot
frame

Link Layer 5-22
FDMA: frequency division multiple access
 channel spectrum divided into frequency bands
 each station assigned fixed frequency band
 unused transmission time in frequency bands go idle
 example: 6-station LAN, 1,3,4 have pkt, frequency bands
2,5,6 idle
frequency
bands
FDM cable
Channel partitioning MAC protocols:
FDMA

Link Layer 5-23
Random access protocols
 when node has packet to send
 transmit at full channel data rate R.
 no a priori coordination among nodes
 two or more transmitting nodes ➜ “collision”,
 random access MAC protocol specifies:
 how to detect collisions
 how to recover from collisions (e.g., via delayed
retransmissions)
 examples of random access MAC protocols:
 slotted ALOHA
 ALOHA
 CSMA, CSMA/CD, CSMA/CA

Link Layer 5-24
Slotted ALOHA
assumptions:
 all frames same size
 time divided into equal
size slots (time to
transmit 1 frame)
 nodes start to transmit
only slot beginning
 nodes are synchronized
 if 2 or more nodes
transmit in slot, all nodes
detect collision
operation:
 when node obtains fresh
frame, transmits in next slot
 if no collision: node can
send new frame in next
slot
 if collision: node
retransmits frame in
each subsequent slot
with prob. p until
success

Link Layer 5-25
Pros:
 single active node can
continuously transmit at
full rate of channel
 highly decentralized:
only slots in nodes need
to be in sync
 simple
Cons:
 collisions, wasting slots
 idle slots
 nodes may be able to
detect collision in less
than time to transmit
packet
 clock synchronization
Slotted ALOHA
1 1 1 1
2
3
2 2
3 3
node 1
node 2
node 3
C C C
S S S
E E E

Link Layer 5-26
 suppose: N nodes with
many frames to send,
each transmits in slot
with probability p
 prob that given node
has success in a slot =
p(1-p)N-1
 prob that any node has
a success = Np(1-p)N-1
 max efficiency: find p*
that maximizes
Np(1-p)N-1
 for many nodes, take
limit of Np*(1-p*)N-1 as N
goes to infinity, gives:
max efficiency = 1/e =
.37
efficiency: long-run
fraction of successful
slots
(many nodes, all with
many frames to send)
at best: channel
used for useful
transmissions
37%
of time!
!
Slotted ALOHA: efficiency

Link Layer 5-27
Pure (unslotted) ALOHA
 unslotted Aloha: simpler, no synchronization
 when frame first arrives
 transmit immediately
 collision probability increases:
 frame sent at t0 collides with other frames sent in [t0-
1,t0+1]

Link Layer 5-28
Pure ALOHA efficiency
P(success by given node) = P(node transmits) .
P(no other node transmits in [t0-1,t0] .
P(no other node transmits in [t0-1,t0]
= p . (1-p)N-1 . (1-p)N-1
= p . (1-p)2(N-1)
… choosing optimum p and then letting n
= 1/(2e) = .18
even worse than slotted Aloha!

Link Layer 5-29
CSMA (carrier sense multiple
access)
CSMA: listen before transmit:
if channel sensed idle: transmit entire frame
 if channel sensed busy, defer transmission
 human analogy: don’t interrupt others!

Link Layer 5-30
CSMA collisions
 collisions can still
occur: propagation
delay means two
nodes may not hear
each other’s
transmission
 collision: entire packet
transmission time
wasted
 distance & propagation
delay play role in in
determining collision
probability
spatial layout of nodes

Link Layer 5-31
CSMA/CD (collision detection)
CSMA/CD: carrier sensing, deferral as in CSMA
 collisions detected within short time
 colliding transmissions aborted, reducing channel
wastage
 collision detection:
 easy in wired LANs: measure signal strengths,
compare transmitted, received signals
 difficult in wireless LANs: received signal strength
overwhelmed by local transmission strength
 human analogy: the polite conversationalist

Link Layer 5-32
CSMA/CD (collision detection)
spatial layout of nodes

Link Layer 5-33
Ethernet CSMA/CD algorithm
1. NIC receives datagram
from network layer,
creates frame
2. If NIC senses channel
idle, starts frame
transmission. If NIC
senses channel busy,
waits until channel idle,
then transmits.
3. If NIC transmits entire
frame without detecting
another transmission,
NIC is done with frame
!
4. If NIC detects another
transmission while
transmitting, aborts
and sends jam signal
5. After aborting, NIC
enters binary
(exponential) backoff:
 after mth collision,
NIC chooses K at
random from {0,1,2,
…, 2m-1}. NIC waits
K·512 bit times,
returns to Step 2
 longer backoff interval
with more collisions

Link Layer 5-34
CSMA/CD efficiency
 Tprop = max prop delay between 2 nodes in LAN
 ttrans = time to transmit max-size frame
 efficiency goes to 1
 as tprop goes to 0
 as ttrans goes to infinity
 better performance than ALOHA: and simple, cheap,
decentralized!
trans
prop /t
t
efficiency
5
1
1



Link Layer 5-35
“Taking turns” MAC protocols
channel partitioning MAC protocols:
 share channel efficiently and fairly at high load
 inefficient at low load: delay in channel access,
1/N bandwidth allocated even if only 1 active
node!
random access MAC protocols
 efficient at low load: single node can fully utilize
channel
 high load: collision overhead
“taking turns” protocols
look for best of both worlds!

Link Layer 5-36
polling:
 master node
“invites” slave nodes
to transmit in turn
 typically used with
“dumb” slave
devices
 concerns:
 polling overhead
 latency
 single point of
failure (master)
master
slaves
poll
data
data

Link Layer 5-37
token passing:
 control token passed
from one node to next
sequentially.
 token message
 concerns:
 token overhead
 latency
 single point of failure
(token)
T
data
(nothing
to send)
T

cable headend
CMTS
ISP
cable modem
termination system
 multiple 40Mbps downstream (broadcast) channels
 single CMTS transmits into channels
 multiple 30 Mbps upstream channels
 multiple access: all users contend for certain upstream
channel time slots (others assigned)
Cable access network
cable
modem
splitter
…
…
Internet frames,TV channels, control transmitted
downstream at different frequencies
upstream Internet frames, TV control, transmitted
upstream at different frequencies in time slots

Link Layer 5-39
DOCSIS: data over cable service interface spec
 FDM over upstream, downstream frequency channels
 TDM upstream: some slots assigned, some have
contention
 downstream MAP frame: assigns upstream slots
 request for upstream slots (and data) transmitted
random access (binary backoff) in selected slots
MAP frame for
Interval [t1, t2]
Residences with cable modems
Downstream channel i
Upstream channel j
t1 t2
Assigned minislots containing cable modem
upstream data frames
Minislots containing
minislots request frames
cable headend
CMTS
Cable access network

Link Layer 5-40
Summary of MAC protocols
 channel partitioning, by time, frequency or code
 Time Division, Frequency Division
 random access (dynamic),
 ALOHA, S-ALOHA, CSMA, CSMA/CD
 carrier sensing: easy in some technologies (wire),
hard in others (wireless)
 CSMA/CD used in Ethernet
 CSMA/CA used in 802.11
 taking turns
 polling from central site, token passing
 bluetooth, FDDI, token ring

Link Layer 5-41
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-42
MAC addresses and ARP
 32-bit IP address:
 network-layer address for interface
 used for layer 3 (network layer) forwarding
 MAC (or LAN or physical or Ethernet) address:
 function: used ‘locally” to get frame from one interface
to another physically-connected interface (same
network, in IP-addressing sense)
 48 bit MAC address (for most LANs) burned in NIC
ROM, also sometimes software settable
 e.g.: 1A-2F-BB-76-09-AD
hexadecimal (base 16) notation
(each “number” represents 4 bits)

Link Layer 5-43
LAN addresses and ARP
each adapter on LAN has unique LAN address
adapter
1A-2F-BB-76-09-AD
58-23-D7-FA-20-B0
0C-C4-11-6F-E3-98
71-65-F7-2B-08-53
LAN
(wired or
wireless)

Link Layer 5-44
LAN addresses (more)
 MAC address allocation administered by
IEEE
 manufacturer buys portion of MAC address
space (to assure uniqueness)
 analogy:
 MAC address: like Social Security Number
 IP address: like postal address
 MAC flat address ➜ portability
 can move LAN card from one LAN to another
 IP hierarchical address not portable
 address depends on IP subnet to which node is
attached

Link Layer 5-45
ARP: address resolution protocol
ARP table: each IP node
(host, router) on LAN has
table
 IP/MAC address
mappings for some
LAN nodes:
< IP address; MAC address;
TTL>
 TTL (Time To Live):
time after which
address mapping will
be forgotten (typically
20 min)
Question: how to determine
interface’s MAC address,
knowing its IP address?
1A-2F-BB-76-09-AD
58-23-D7-FA-20-B0
0C-C4-11-6F-E3-98
71-65-F7-2B-08-53
LAN
137.196.7.23
137.196.7.78
137.196.7.14
137.196.7.88

Link Layer 5-46
ARP protocol: same LAN
 A wants to send
datagram to B
 B’s MAC address not in
A’s ARP table.
 A broadcasts ARP
query packet,
containing B's IP
address
 dest MAC address = FF-
FF-FF-FF-FF-FF
 all nodes on LAN receive
ARP query
 B receives ARP packet,
replies to A with its (B's)
MAC address
 frame sent to A’s MAC
address (unicast)
 A caches (saves) IP-to-
MAC address pair in its
ARP table until
information becomes
old (times out)
 soft state: information
that times out (goes
away) unless refreshed
 ARP is “plug-and-play”:
 nodes create their ARP
tables without
intervention from net
administrator

Link Layer 5-47
walkthrough: send datagram from A to B via R
 focus on addressing – at IP (datagram) and MAC layer
(frame)
 assume A knows B’s IP address
 assume A knows IP address of first hop router, R (how?)
 assume A knows R’s MAC address (how?)
Addressing: routing to another
LAN
R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B

R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B
Link Layer 5-48
LAN
IP
Eth
Phy
IP src: 111.111.111.111
IP dest: 222.222.222.222
 A creates IP datagram with IP source A, destination B
 A creates link-layer frame with R's MAC address as dest, frame
contains A-to-B IP datagram
MAC src: 74-29-9C-E8-FF-55
MAC dest: E6-E9-00-17-BB-4B

R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B
Link Layer 5-49
LAN
IP
Eth
Phy
 frame sent from A to R
IP
Eth
Phy
 frame received at R, datagram removed, passed up to IP
MAC src: 74-29-9C-E8-FF-55
MAC dest: E6-E9-00-17-BB-4B
IP src: 111.111.111.111
IP dest: 222.222.222.222
IP src: 111.111.111.111
IP dest: 222.222.222.222

R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B
Link Layer 5-50
LAN
IP src: 111.111.111.111
IP dest: 222.222.222.222
 R forwards datagram with IP source A, destination B
 R creates link-layer frame with B's MAC address as dest, frame
MAC src: 1A-23-F9-CD-06-9B
MAC dest: 49-BD-D2-C7-56-2A
IP
Eth
Phy
IP
Eth
Phy

R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B
Link Layer 5-51
LAN
IP src: 111.111.111.111
IP dest: 222.222.222.222
IP
Eth
Phy
IP
Eth
Phy

R
1A-23-F9-CD-06-9B
222.222.222.220
111.111.111.110
E6-E9-00-17-BB-4B
CC-49-DE-D0-AB-7D
111.111.111.112
111.111.111.111
74-29-9C-E8-FF-55
A
222.222.222.222
49-BD-D2-C7-56-2A
222.222.222.221
88-B2-2F-54-1A-0F
B
Link Layer 5-52
LAN
IP src: 111.111.111.111
IP dest: 222.222.222.222
IP
Eth
Phy

Link Layer 5-53
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-54
Ethernet
“dominant” wired LAN technology:
 cheap $20 for NIC
 first widely used LAN technology
 simpler, cheaper than token LANs and ATM
 kept up with speed race: 10 Mbps – 10 Gbps
Metcalfe’s Ethernet sketch

Link Layer 5-55
Ethernet: physical topology
 bus: popular through mid 90s
 all nodes in same collision domain (can collide with
each other)
 star: prevails today
 active switch in center
 each “spoke” runs a (separate) Ethernet protocol
(nodes do not collide with each other)
switch
bus: coaxial cable
star

Link Layer 5-56
Ethernet frame structure
sending adapter encapsulates IP datagram (or
other network layer protocol packet) in
Ethernet frame
preamble:
 7 bytes with pattern 10101010 followed by
one byte with pattern 10101011
 used to synchronize receiver, sender clock
rates
dest.
address
source
address
data
(payload) CRC
preamble
type

Link Layer 5-57
Ethernet frame structure (more)
 addresses: 6 byte source, destination MAC
addresses
 if adapter receives frame with matching destination
address, or with broadcast address (e.g. ARP packet),
it passes data in frame to network layer protocol
 otherwise, adapter discards frame
 type: indicates higher layer protocol (mostly IP
but others possible, e.g., Novell IPX, AppleTalk)
 CRC: cyclic redundancy check at receiver
 error detected: frame is dropped
dest.
address
source
address
data
(payload) CRC
preamble
type

Link Layer 5-58
Ethernet: unreliable, connectionless
 connectionless: no handshaking between
sending and receiving NICs
 unreliable: receiving NIC doesnt send acks or
nacks to sending NIC
 data in dropped frames recovered only if initial
sender uses higher layer rdt (e.g., TCP),
otherwise dropped data lost
 Ethernet’s MAC protocol: unslotted CSMA/CD
wth binary backoff

Link Layer 5-59
802.3 Ethernet standards: link & physical
layers
 many different Ethernet standards
 common MAC protocol and frame format
 different speeds: 2 Mbps, 10 Mbps, 100 Mbps,
1Gbps, 10G bps
 different physical layer media: fiber, cable
application
transport
network
link
physical
MAC protocol
and frame format
100BASE-TX
100BASE-T4
100BASE-FX
100BASE-T2
100BASE-SX 100BASE-BX
fiber physical layer
copper (twister
pair) physical layer

Link Layer 5-60
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-61
Ethernet switch
 link-layer device: takes an active role
 store, forward Ethernet frames
 examine incoming frame’s MAC address,
selectively forward frame to one-or-more
outgoing links when frame is to be forwarded
on segment, uses CSMA/CD to access
segment
 transparent
 hosts are unaware of presence of switches
 plug-and-play, self-learning
 switches do not need to be configured

Link Layer 5-62
Switch: multiple simultaneous
transmissions
 hosts have dedicated, direct
connection to switch
 switches buffer packets
 Ethernet protocol used on
each incoming link, but no
collisions; full duplex
 each link is its own
collision domain
 switching: A-to-A’ and B-to-
B’ can transmit
simultaneously, without
collisions
switch with six interfaces
(1,2,3,4,5,6)
A
A’
B
B’ C
C’
1 2
3
4
5
6

Link Layer 5-63
Switch forwarding table
Q: how does switch know A’
reachable via interface 4, B’
reachable via interface 5?
switch with six interfaces
(1,2,3,4,5,6)
A
A’
B
B’ C
C’
1 2
3
4
5
6
 A: each switch has a
switch table, each entry:
 (MAC address of host,
interface to reach host, time
stamp)
 looks like a routing table!
Q: how are entries created,
maintained in switch table?
 something like a routing
protocol?

A
A’
B
B’ C
C’
1 2
3
4
5
6
Link Layer 5-64
Switch: self-learning
 switch learns which
hosts can be reached
through which interfaces
 when frame received,
switch “learns”
location of sender:
incoming LAN
segment
 records
sender/location pair in
switch table
A A’
Source: A
Dest: A’
MAC addr interface TTL
Switch table
(initially empty)
A 1 60

Link Layer 5-65
Switch: frame filtering/forwarding
when frame received at switch:
1. record incoming link, MAC address of sending host
2. index switch table using MAC destination address
3. if entry found for destination
then {
if destination on segment from which frame arrived
then drop frame
else forward frame on interface indicated by
entry
}
else flood /* forward on all interfaces except
arriving
interface */

A
A’
B
B’ C
C’
1 2
3
4
5
6
Link Layer 5-66
Self-learning, forwarding: example
A A’
Source: A
Dest: A’
MAC addr interface TTL
switch table
(initially empty)
A 1 60
A A’
A A’
A A’
A A’
A A’
 frame destination, A’,
locaton unknown:flood
A’ A
 destination A location
known:
A’ 4 60
selectively
send
on just one link

Link Layer 5-67
Interconnecting switches
 switches can be connected together
Q: sending from A to G - how does S1 know to
forward frame destined to F via S4 and S3?
 A: self learning! (works exactly the same as in
single-switch case!)
A
B
S1
C D
E
F
S2
S4
S3
H
I
G

Link Layer 5-68
Self-learning multi-switch
example
Suppose C sends frame to I, I responds to C
 Q: show switch tables and packet forwarding in S1,
S2, S3, S4
A
B
S1
C D
E
F
S2
S4
S3
H
I
G

Link Layer 5-69
Institutional network
to external
network
router
IP subnet
mail server
web server

Link Layer 5-70
Switches vs. routers
both are store-and-forward:
 routers: network-layer
devices (examine
network-layer headers)
 switches: link-layer
devices (examine link-
layer headers)
both have forwarding
tables:
 routers: compute tables
using routing algorithms,
IP addresses
 switches: learn
forwarding table using
flooding, learning, MAC
addresses
application
transport
network
link
physical
network
link
physical
link
physical
switch
datagram
application
transport
network
link
physical
frame
frame
frame
datagram

Link Layer 5-71
VLANs: motivation
consider:
 CS user moves office to
EE, but wants connect to
CS switch?
 single broadcast
domain:
 all layer-2 broadcast
traffic (ARP, DHCP,
unknown location of
destination MAC
address) must cross
entire LAN
 security/privacy,
efficiency issues
Computer
Science Electrical
Engineering
Computer
Engineering

Link Layer 5-72
VLANs
port-based VLAN: switch ports
grouped (by switch
management software) so that
single physical switch ……
switch(es) supporting
VLAN capabilities can
be configured to
define multiple virtual
LANS over single
physical LAN
infrastructure.
Virtual Local
Area Network
1
8
9
16
10
2
7
…
Electrical Engineering
(VLAN ports 1-8)
Computer Science
(VLAN ports 9-15)
15
…
(VLAN ports 1-8)
…
1
8
2
7 9
16
10
15
…
Computer Science
(VLAN ports 9-16)
… operates as multiple virtual
switches

Link Layer 5-73
Port-based VLAN
1
8
9
16
10
2
7
…
(VLAN ports 1-8)
Computer Science
(VLAN ports 9-15)
15
…
 traffic isolation: frames
to/from ports 1-8 can only
reach ports 1-8
 can also define VLAN based on
MAC addresses of endpoints,
rather than switch port
 dynamic membership:
ports can be dynamically
assigned among VLANs
router
 forwarding between VLANS:
done via routing (just as with
separate switches)
 in practice vendors sell combined
switches plus routers

Link Layer 5-74
VLANS spanning multiple
switches
 trunk port: carries frames between VLANS defined over
multiple physical switches
 frames forwarded within VLAN between switches can’t be vanilla
802.1 frames (must carry VLAN ID info)
 802.1q protocol adds/removed additional header fields for frames
forwarded between trunk ports
1
8
9
10
2
7
…
(VLAN ports 1-8)
Computer Science
(VLAN ports 9-15)
15
…
2
7
3
Ports 2,3,5 belong to EE VLAN
Ports 4,6,7,8 belong to CS VLAN
5
4 6 8
16
1

Link Layer 5-75
type
2-byte Tag Protocol Identifier
(value: 81-00)
Tag Control Information (12 bit VLAN ID field,
3 bit priority field like IP TOS)
Recomputed
CRC
802.1Q VLAN frame format
802.1 frame
802.1Q frame
dest.
address
source
address
data (payload) CRC
preamble
dest.
address
source
address
preamble data (payload) CRC
type

Link Layer 5-76
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-77
Multiprotocol label switching (MPLS)
 initial goal: high-speed IP forwarding using
fixed length label (instead of IP address)
 fast lookup using fixed length identifier (rather than
shortest prefix matching)
 borrowing ideas from Virtual Circuit (VC) approach
 but IP datagram still keeps IP address!
PPP or Ethernet
header
IP header remainder of link-layer frame
MPLS header
label Exp S TTL
20 3 1 5

Link Layer 5-78
MPLS capable routers
 a.k.a. label-switched router
 forward packets to outgoing interface based only
on label value (don’t inspect IP address)
 MPLS forwarding table distinct from IP forwarding
tables
 flexibility: MPLS forwarding decisions can differ
from those of IP
 use destination and source addresses to route flows to
same destination differently (traffic engineering)
 re-route flows quickly if link fails: pre-computed backup
paths (useful for VoIP)

Link Layer 5-79
R2
D
R3
R5
A
R6
MPLS versus IP paths
IP router
 IP routing: path to destination
determined by destination address
alone
R4

Link Layer 5-80
R2
D
R3
R4
R5
A
R6
MPLS versus IP paths
IP-only
router
 IP routing: path to destination
determined by destination address
alone MPLS and
IP router
 MPLS routing: path to destination
can be based on source and dest.
address
 fast reroute: precompute backup
routes in case of link failure
entry router (R4) can use different MPLS
routes to A based, e.g., on source address

Link Layer 5-81
MPLS signaling
 modify OSPF, IS-IS link-state flooding protocols
to carry info used by MPLS routing,
 e.g., link bandwidth, amount of “reserved” link
bandwidth
D
R4
R5
A
R6
 entry MPLS router uses RSVP-TE signaling
protocol to set up MPLS forwarding at
downstream routers
modified
link state
flooding
RSVP-TE

Link Layer 5-82
R1
R2
D
R3
R4
R5
0
1
0
0
A
R6
in out out
label label dest interface
6 - A 0
in out out
10 6 A 1
12 9 D 0
in out out
10 A 0
12 D 0
1
in out out
8 6 A 0
0
8 A 1
MPLS forwarding tables

Link Layer 5-83
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-84
Data center networks
 10’s to 100’s of thousands of hosts, often closely
coupled, in close proximity:
 e-business (e.g. Amazon)
 content-servers (e.g., YouTube, Akamai, Apple,
Microsoft)
 search engines, data mining (e.g., Google)
 challenges:
 multiple applications, each
serving massive numbers
of clients
 managing/balancing load,
avoiding processing,
networking, data
bottlenecks Inside a 40-ft Microsoft container,
Chicago data center

Link Layer 5-85
Server racks
TOR switches
Tier-1 switches
Tier-2 switches
Load
balancer
Load
balancer
B
1 2 3 4 5 6 7 8
A C
Border router
Access router
Internet
load balancer: application-layer
routing
 receives external client requests
 directs workload within data center
 returns results to external client (hiding
data center internals from client)

Server racks
TOR switches
Tier-1 switches
Tier-2 switches
1 2 3 4 5 6 7 8
 rich interconnection among switches, racks:
 increased throughput between racks (multiple routing
paths possible)
 increased reliability via redundancy

Link Layer 5-87
5.1 introduction,
services
correction
5.3 multiple access
protocols
5.4 LANs
 addressing, ARP
 Ethernet
 switches
 VLANS
MPLS
5.6 data center
networking
web request

Link Layer 5-88
Synthesis: a day in the life of a web request
 journey down protocol stack complete!
 application, transport, network, link
 putting-it-all-together: synthesis!
 goal: identify, review, understand protocols (at all
layers) involved in seemingly simple scenario:
requesting www page
 scenario: student attaches laptop to campus
network, requests/receives www.google.com

Link Layer 5-89
A day in the life: scenario
Comcast network
68.80.0.0/13
Google’s network
64.233.160.0/19
64.233.169.105
web server
DNS server
school network
68.80.2.0/24
web page
browser

router
(runs DHCP)
Link Layer 5-90
A day in the life… connecting to the
Internet
 connecting laptop needs
to get its own IP address,
addr of first-hop router,
addr of DNS server: use
DHCP
DHCP
UDP
IP
Eth
Phy
DHCP
DHCP
DHCP
DHCP
DHCP
DHCP
UDP
IP
Eth
Phy
DHCP
DHCP
DHCP
DHCP
DHCP
 DHCP request
encapsulated in UDP,
encapsulated in IP,
encapsulated in 802.3
Ethernet
 Ethernet frame broadcast
(dest: FFFFFFFFFFFF) on
LAN, received at router
running DHCP server
 Ethernet demuxed to IP
demuxed, UDP demuxed
to DHCP

router
(runs DHCP)
Link Layer 5-91
 DHCP server formulates
DHCP ACK containing
client’s IP address, IP
address of first-hop router
for client, name & IP
address of DNS server
DHCP
UDP
IP
Eth
Phy
DHCP
DHCP
DHCP
DHCP
DHCP
UDP
IP
Eth
Phy
DHCP
DHCP
DHCP
DHCP
DHCP
 encapsulation at DHCP
server, frame forwarded
(switch learning) through
LAN, demultiplexing at
client
Client now has IP address, knows name & addr of DNS
server, IP address of its first-hop router
 DHCP client receives
DHCP ACK reply
A day in the life… connecting to the
Internet

router
(runs DHCP)
Link Layer 5-92
A day in the life… ARP (before DNS, before
HTTP)
 before sending HTTP request,
need IP address of
www.google.com: DNS
DNS
UDP
IP
Eth
Phy
DNS
DNS
DNS
 DNS query created,
encapsulated in UDP,
encapsulated in IP,
encapsulated in Eth. To send
frame to router, need MAC
address of router interface: ARP
 ARP query broadcast,
received by router, which
replies with ARP reply giving
MAC address of router
interface
 client now knows MAC
address of first hop router, so
can now send frame
containing DNS query
ARP query
Eth
Phy
ARP
ARP
ARP reply

router
(runs DHCP)
Link Layer 5-93
DNS
UDP
IP
Eth
Phy
DNS
DNS
DNS
DNS
DNS
 IP datagram containing
DNS query forwarded via
LAN switch from client to
1st hop router
 IP datagram forwarded from
campus network into comcast
network, routed (tables created
by RIP, OSPF, IS-IS and/or
BGP routing protocols) to DNS
server
 demux’ed to DNS server
 DNS server replies to
client with IP address of
www.google.com
Comcast network
68.80.0.0/13
DNS server
DNS
UDP
IP
Eth
Phy
DNS
DNS
DNS
DNS
A day in the life… using DNS

router
(runs DHCP)
Link Layer 5-94
A day in the life…TCP connection carrying
HTTP
HTTP
TCP
IP
Eth
Phy
HTTP
 to send HTTP request,
client first opens TCP
socket to web server
 TCP SYN segment (step 1
in 3-way handshake) inter-
domain routed to web server
 TCP connection established!
64.233.169.105
web server
SYN
SYN
SYN
SYN
TCP
IP
Eth
Phy
SYN
SYN
SYN
SYNACK
SYNACK
SYNACK
SYNACK
SYNACK
SYNACK
SYNACK
 web server responds with
TCP SYNACK (step 2 in 3-
way handshake)

router
(runs DHCP)
Link Layer 5-95
A day in the life… HTTP request/reply
HTTP
TCP
IP
Eth
Phy
HTTP
 HTTP request sent into
TCP socket
 IP datagram containing
HTTP request routed to
www.google.com
 IP datagram containing HTTP
reply routed back to client
64.233.169.105
web server
HTTP
TCP
IP
Eth
Phy
 web server responds with
HTTP reply (containing web
page)
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
HTTP
 web page finally (!!!)
displayed

Link Layer 5-96
Chapter 5: Summary
 principles behind data link layer services:
 error detection, correction
 sharing a broadcast channel: multiple access
 link layer addressing
 instantiation and implementation of various link
layer technologies
 Ethernet
 switched LANS, VLANs
 virtualized networks as a link layer: MPLS
 synthesis: a day in the life of a web request

Link Layer 5-97
Chapter 5: let’s take a breath
 journey down protocol stack complete (except
PHY)
 solid understanding of networking principles,
practice
 ….. could stop here …. but lots of interesting
topics!
 wireless
 multimedia
 security
 network management

Chapter_5_CN Link Layer.ppt

More Related Content

What's hot (20)

Similar to Chapter_5_CN Link Layer.ppt (20)

Recently uploaded (20)

Chapter_5_CN Link Layer.ppt