Class 11 Chapter 6 Thermodynamics.pptx h

Class XI Chemistry
Unit 6
THERMODYNAMICS
Topic:-THERMODYNAMIC TERMS
• Sub topics:-
• The System and the Surroundings
• Types of the System
• State of the System
• State Functions
• Adiabatic System
By Vijay Kumar Sethi

Thermodynamics
• The branch of science which deals with the quantitative relationship between heat and
other forms of energies is called thermodynamics
• For example,
• Chemical energy stored by molecules can be released as heat during chemical
reactions when a fuel like methane, cooking gas or coal burns in air.
• The chemical energy used to do mechanical work when a fuel burns in an engine
• The chemical energy used to provide electrical energy through a galvanic cell like
dry cell.
• The study of these energy transformations forms the subject matter of thermodynamics

The System and the Surroundings
• The part of universe in which observations are made or which is under investigation
is called system
• Surroundings is the part of universe other than system . The surroundings include
everything other than the system.
• System and the surroundings together constitute the universe .
• The universe = The system + The surroundings

• For example, if we are studying the reaction
between two substances A and B kept in a
beaker, the beaker containing the reaction
mixture is the system and the room where the
beaker is kept is the surroundings
• System and surroundings are separated by a
boundary.
• This boundary may be real or imaginary.
Continue…
The System and the Surroundings

Types of the System
Open System
• There is exchange of energy and matter between system and surroundings.
• For example. the presence of reactants in an open beaker.
• Here the boundary is an imaginary
Closed System
• There is no exchange of matter, but exchange of energy is possible between system and
the surroundings.
• For example, the presence of reactants in a closed vessel made of conducting material.
Isolated System
• There is no exchange of energy and matter between the system and the surroundings
• For example, the presence of reactants in a thermos flask or any other closed insulated
vessel

Continue…
Types of the System

The State of the System
• The state of a thermodynamic system is described by its measurable or
macroscopic (bulk) properties.
• We can describe the state of a gas by quoting its pressure (p), volume (V),
temperature (T ), amount (n) etc.

State Functions
• The macroscopic properties whose values depend only on the state of the
system(initial and final) and not on how it is reached are called state functions.
• For example, P, T, V, Internal energy, Enthalpy, Entropy
• Path functions depend on
the path taken to reach one
state from another.

Adiabatic System
• The system which will not allow exchange of heat
between the system and surroundings through its
boundary but energy of the system may change by
work.
• Adiabatic process is a process in which there is no
transfer of heat between the system and
surroundings.
• The wall separating the system and the
surroundings is called the adiabatic wall.
• Bursting of tyre is an example of adiabatic process.
• it happens so fast, there is not enough time to
exchange heat with surroundings

Adiabatic System Isolated System
It has no exchange of energy and matter
with the surrounding environment
It has no transfer of energy and matter
through its boundaries .
It has a surrounding environment It doesn’t have a surrounding
environment
It does not gain or loss energy but
internal energy can be changed due to
work done by the system
Energy is conserved
Internal energy can be changed Internal energy can not be changed

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Internal Energy (U)
• Mathematical statement of the first law of thermodynamics

Internal Energy (U)
• Total energy of the system is called internal energy of the system.
• It is the sum of kinetic(translational , vibrational and rotational) potential , chemical,
electrical, mechanical energies etc.
• Internal energy is a state function-depends on initial and final states of the system
• Absolute value of U can not be determined.
• Change in internal energy (ΔU) is determined. ΔU = U2-U1
• It may change, when
• heat passes into or out of the system,
• work is done on or by the system,
• matter enters or leaves the system.

Ways of Changing Internal Energy
Work: Consider an adiabatic system
• Initial state of the system = A and its temperature =TA.
• Internal energy of the system in state A = UA.
• We can change the state of the system in two different ways.
One way: By mechanical work (1 kJ):- by rotating a set of small
paddles
• Final State =B state and its temperature=TB.
• if TB > TA and the change in temperature, DT = TB–TA.
• The internal energy of the system in state B = UB and
• The change in internal energy, DU =UB– UA =Wad.

Continue…
Ways of Changing Internal Energy Work
• Second way: We now do an equal amount (i.e., 1kJ) electrical work with the help of
an immersion rod and note down the temperature change.
• We find that the change in temperature is same as in the earlier case, TB – TA
• The change in internal energy, DU =UB– UA =Wad.
• Therefore, internal energy, U, of the system is a state function.
• J. P. Joule showed that a given amount of work done on the system, no matter how
it was done (irrespective of path) produced the same change of state, as measured
by the change in the temperature of the system. By conventions:-
• Work done on the system = positive work (+W) internal energy of system
increases.
• Work done by the system = negative work (-W) internal energy of the system
decreases.

Continue…
Heat(q) :
• If system and surroundings are at different temperatures , internal energy of the system is
changed by transfer of heat through thermally conducting walls
• If temperature of System = TA and Temperature of surroundings = TB
• TB < TA heat is transferred from system to surroundings till TB=TA
• TB > TA heat is transferred from surroundings to system till TB=TA
• In this case change in internal energy, DU= q, when no work is
done at constant volume.

Heat(q) :
• By conventions
• The q is positive (+q)= heat is transferred from the surroundings to the
system and the internal energy of the system increases and
• q is negative (-q) = heat is transferred from system to the surroundings
resulting in decrease of the internal energy of the system..
Continue…

Mathematical statement of the first law of thermodynamics
• DU = U2 – U1 = q + w
• DU = q + w mathematical statement of the first law of thermodynamics,
• which states that The energy of an isolated system is constant.
• It is commonly stated as the law of conservation of energy i.e., energy can neither be
created nor be destroyed.

Continue…
Mathematical statement of the first law of thermodynamics
• q and w are path functions but q +w = DU will depend only on
initial and final state therefore (q + w) is state function
• It will be independent of the way the change is carried out.
• If there is no transfer of energy as heat or as work (isolated
system) i.e., if w = 0 and q = 0, then D U = 0.

Problem 6.1
Express the change in internal energy of a system when
(i) No heat is absorbed by the system from the surroundings, but work (w) is done
on the system. What type of wall does the system have ?
Solution:- D U = wad, wall is adiabatic
(ii) No work is done on the system, but q amount of heat is taken out from the system
and given to the surroundings. What type of wall does the system have?
Solution:- D U = – q, thermally conducting walls
(iii) w amount of work is done by the system and q amount of heat is supplied to the
system. What type of system would it be?
Solution:- D U = q – w, closed system.

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Pressure-Volume Work
• Reversible and Irreversible process

Pressure-Volume Work
• A cylinder contains one mole of an ideal gas fitted
with a frictionless piston.
• Initial volume the gas is Vi and pressure of the gas
inside is p.
• pex = external pressure , pex > p
• piston is moved inward till pex= p
• Final volume = Vf .
• During this compression, piston moves a distance,
l and is cross-sectional area of the piston is A

then, volume change = l × A = DV = (Vf – Vi)
pressure =
force
area
Therefore, force on the piston = pex . A
If w is the work done on the system by movement of the piston then
w = force x distance = pex . A .l w = pex . (Vf – Vi )= – pex DV w = – pDV
• The negative sign of this expression is required to
obtain conventional sign for w, which will be positive.
• compression work is done on the system.
• (Vf – Vi ) will be negative and negative multiplied by
negative will be positive.
• This formula is also applicable for
expansion work which is done by the
system so it will be negative.
• In expansion (Vf – Vi ) will be positive

Reversible process
• A process or change is said to be reversible, if a change is brought out in such a
way that the process could, at any moment, be reversed by an infinitesimal
(इन्फ़िफनˈटे̮फिम्ल् extremely small )change.
• A reversible process proceeds infinitely slowly by a series of equilibrium states
such that system and the surroundings are always in near equilibrium with each
other.
Irreversible processes
• Processes other than reversible processes are known as irreversible processes.
• All natural processes are irreversible.

Reversible process Irreversible process
The process is carried out infinitesimally
slowly.
It is carried out rapidly
At any stage, the equilibrium is not
disturbed
Equilibrium may exit only after the
completion of the process.
It takes infinite time for completion. It takes a finite time for completion.
Work obtained in this process is
maximum
Work obtained in this process is not
maximum`
It is an imaginary process. It is a natural process
Differences between Reversible and Irreversible process

Continue…
• If the compression of gas is carried out in number of finite steps, work
done on the gas will be summed over all the steps and will be equal to Ʃ
pDV
Fig :-
• pV-plot when pressure is not constant and
changes in finite steps during compression from
initial volume, Vi to final volume, Vf
• Work done on the gas is represented by the
shaded area.

Continue…
Pressure-Volume Work in Reversible
process
• If the compression of gas is carried out in infinite steps through reversible process,
at each stage of compression, the volume decreases by an infinitesimal amount, dV.
• In this case, the work done on the gas is calculated by the following relation
• Here, pex at each stage is equal to (pin + dp) in case of
compression.
• In an expansion process, pex = (pin– dp).
• In general, pex = (pin ± dp).

Continue…
Pressure-Volume Work in Reversible
process
pV =nRT
p =
nRT
V
Fig. pV-plot when pressure is not constant and changes in
infinite steps (reversible conditions) during compression
from initial volume, Vi to final volume, Vf .
• Work done on the gas is represented by the shaded
area.

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Free expansion
• Problem 6.2, 6.3, 6.4

Free expansion:
• Expansion of a gas in vacuum (pex = 0) is called free expansion.
• No work is done during free expansion of an ideal gas whether the
process is reversible or irreversible.
w = – pex DV if pex =0 w = 0
• mathematical statement of the first law of thermodynamics DU = q + w
DU = q – pex DV
• If a process is carried out at constant volume (DV = 0), then
DU = qv
• Change in internal energy is the heat supplied at constant volume.

• For isothermal (T = constant) expansion of an ideal gas into
vacuum ; w = 0 since pex = 0.
• Also, Joule determined experimentally that q = 0; therefore, DU
= 0
Isothermal and free expansion of an ideal
gas
DU = q + w can be expressed for isothermal irreversible and reversible changes as
follows:
1. For isothermal irreversible change
2. For isothermal reversible change
3. For adiabatic change, q = 0

Problem 6.2
Two litres of an ideal gas at a pressure of 10 atm expands isothermally at 25 °C into a
vacuum until its total volume is 10 litres. How much heat is absorbed and how much work
is done in the expansion ?
Solution
For isothermal process
w = -pex (Vf- Vi) = 0(10 – 2) = 0(8) = 0 No work is done; no heat is absorbed.
Problem 6.3
Consider the same expansion, but this time against a constant external pressure of 1 atm.
Solution
We have q = – w = pex (8) = 8 litre-atm

Problem 6.4
Consider the expansion given in problem 6.2, for 1 mol of an ideal gas conducted
reversibly.
Solution
= 2.303 × 1 × 0.0821 × 298 log
10
2
= 2.303 × 1 × 0.0821 × 298 × 0.6990 = 39.38 L atm

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Enthalpy
• Relation between DU And DH

Enthalpy, H
• The heat absorbed at constant volume is equal to change in the Internal Energy i.e.,
DU = qv
• But most of chemical reactions are carried out not at constant volume, but in flasks or
test tubes under constant atmospheric pressure.
• Another thermodynamic function, the enthalpy H [Greek word enthalpien, to warm or
heat content] as : H = U + pV
• Enthalpy is the sum of internal energy and product of pressure-volume.
• Enthalpy is a state function-depends on initial and final states of the system
• Absolute value of H can not be determined.
• Change in enthalpy (ΔH) is determined. ΔH = H2-H1

Continue… Enthalpy, H
mathematical statement of the first law of thermodynamics DU = q + w, w = – pDV
At constant pressure, DU = qp – pDV,
where qp is heat absorbed by the system and –pDV = expansion work done by the
system.
Let us consider two state state 1 state 2
Internal energy U1 U2
Volume V1 V2
Change in internal energy U2–U1 = qp – p (V2 – V1)
On rearranging, qp = (U2 + pV2) – (U1 + pV1)
From H = U + pV H2=U2 + pV2
H1=U1 + pV1
qp= H2 – H1 = DH

Continue… Enthalpy, H
• For finite changes at constant pressure the equation H = U + pV can be written as
• DH = DU + DpV Since p is constant, we can write
• DH = DU + pDV
• DH = qp, heat absorbed by the system at constant pressure
• DH is negative for exothermic reactions which evolve heat during the reaction and
• DH is positive for endothermic reactions which absorb heat from the surroundings.
• At constant volume (DV = 0), DU = qV,
• DH = DU + pDV DH = qp = DU = qV
• The difference between DH and DU is not usually significant for systems consisting of
only solids and / or liquids. Solids and liquids do not suffer any significant volume
changes upon heating.

Relation between ΔH and ΔU for the system having Gases
• Let us consider a reaction involving gases.
• If VA = total volume of the gaseous reactants, VB = total volume of the gaseous
products,
• nA = No. of moles of gaseous reactants , and nB = No. of moles of gaseous
products,
• At constant T and P, pVA = nART and pVB = nBRT
• Thus, pVB – pVA = nBRT – nART = (nB–nA)RT
p (VB – VA) = (nB – nA) RT
or p DV = DngRT
DH = DU + pDV
DH = DU + DngRT
Dng refers to the number of moles of
gaseous products minus the number of
moles of gaseous reactants.

Problem 6.5
If water vapour is assumed to be a perfect gas, molar enthalpy change for vapourisation of 1
mol of water at 1bar and 100°C is 41kJ mol–1. Calculate the internal energy change, when 1
mol of water is vapourised at 1 bar pressure and 100°C.
Solution
The change 𝐻2𝑂(𝑙) → 𝐻2𝑂(𝑔) DH = DU + DngRT
or DU = DH – DngRT ,
DH = 41 kJ mol–1 Dng = 1 R = 8.3 JK-1mol-1 = 8.3 x 10-3 kJK-1mol-1 T =
100°C = 373 K
DU = 41 kJ mol–1 – 1 x 8.3 x 10-3kJK-1mol-1 x 373 K = 41 kJ mol-1 – 3.096 kJ mol-1
DU = 37.904 kJ mol–1

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Extensive and Intensive Properties
• Measurement Of DU And DH

• An extensive property is a property whose value depends on the quantity or size
of matter present in the system.
• For example, mass, volume, internal energy, enthalpy, heat capacity, etc.
are extensive properties.
• Those properties which do not depend on the quantity or size of matter present
are known as intensive properties.
• For example temperature, density, pressure, molar heat capacity etc. are
intensive properties.
Extensive and Intensive Properties

Continue…
Extensive and Intensive Properties
• considering a gas enclosed in a container of
volume V and at temperature T .
• Let us make a partition such that volume is
halved, each part now has one half of the original
volume,V/2 , but the temperature will still remain
the same i.e., T.
• It is clear that volume is an extensive property and
temperature is an intensive property.

MEASUREMENT OF DU AND DH:
CALORIMETRY:-
• Experimental technique used to measure energy changes associated with chemical or
physical processes is called calorimetry
• A calorimeter is a device used to measure the amount of heat changed in a chemical or
physical process by measuring temperature changes.
• Measurements are made under two different conditions:
• i) at constant volume, qV
• ii) at constant pressure, qp

DU Measurements
• For chemical reactions, heat absorbed at
constant volume, is measured in a bomb
calorimeter .
• Here, a steel vessel (the bomb) is immersed in a
water bath. The whole device is called
calorimeter.
• The steel vessel is immersed in water bath to
ensure that no heat is lost to the surroundings.
• A combustible substance is burnt in pure
dioxygen supplied in the steel bomb

• Heat evolved during the reaction is transferred to the water around the bomb and
its temperature is monitored.
• Since the bomb calorimeter is sealed, its volume does not change i.e., the energy
changes associated with reactions are measured at constant volume.
• Under these conditions, no work is done as the reaction is carried out at constant
volume in the bomb calorimeter
• Temperature change of the calorimeter produced by the completed reaction is
then converted to qV
Continue…
DU Measurements

DH Measurements
• Measurement of heat change at constant pressure
(generally under atmospheric pressure) can be done in a
simple calorimeter. DH = qp (at constant p)
• Heat absorbed or evolved, qp at constant pressure is also
called the heat of reaction or enthalpy of reaction, DrH.
• In an exothermic reaction, heat is evolved, and system
loses heat to the surroundings. Therefore, qp will be
negative and DrH will also be negative.
• Similarly in an endothermic reaction, heat is absorbed, qp
is positive and DrH will be positive.

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
• Standard Enthalpy of Reactions
• Enthalpy Changes during Phase
Transformations
• Standard Enthalpy of Formation

Enthalpy Change, DrH Of A Reaction – Reaction Enthalpy
• The enthalpy change accompanying a reaction is called the reaction enthalpy
(DrH) or Enthalpy of a Reaction.
Standard Enthalpy of Reactions, DrHƟ
• The standard enthalpy of reaction is the enthalpy change for a reaction when all the
participating substances are in their standard states.
• The standard state of a substance at a specified temperature is its pure form at 1
bar. For example, the standard state of liquid ethanol at 298 K is pure liquid ethanol
at 1 bar; standard state of solid iron at 500 K is pure iron at 1 bar. Usually data are
taken at 298 K.
• Standard conditions are denoted by adding the superscript Ɵ to the symbol DH,
e.g., DHƟ

Enthalpy Changes during Phase Transformations
Standard enthalpy of fusion
• The enthalpy change that accompanies melting of one mole of a solid substance
in standard state is called standard enthalpy of fusion or molar enthalpy of fusion,
DfusHƟ.
• Melting of a solid is endothermic, so all enthalpies of fusion are positive
Standard enthalpy of vaporization
• Amount of heat required to vaporize one mole of a liquid at constant temperature
and under standard pressure (1bar) is called its standard enthalpy of vaporization
or molar enthalpy of vaporization, DvapHƟ.

Standard enthalpy of sublimation
• Sublimation is direct conversion of a solid into its vapour.
• DsubHƟ is the change in enthalpy when one mole of a solid substance sublimes
at a constant temperature and under standard pressure (1bar).
• Solid CO2 or ‘dry ice’ sublimes at 195K with DsubHƟ=25.2 kJ mol–1;
• Naphthalene sublimes slowly and for this DsubHƟ = 73.0 kJ mol–1
• The magnitude of the enthalpy change depends on the strength of the
intermolecular interactions in the substance undergoing the phase
transformations.
Continue…
Enthalpy Changes during Phase Transformations

Problem 6.7
A swimmer coming out from a pool is covered with a film of water weighing about 18g. How
much heat must be supplied to evaporate this water at 298 K ? Calculate the internal energy
of vaporisation at 298K. Dvap HƟfor water at 298K= 44.01kJ mol–1
Solution:- process of evaporation 𝐻2𝑂 𝑙 → 𝐻2𝑂 𝑔 18 g of water = 1 mole of water
Heat supplied to evaporate18g water at 298 K = n × DvapHƟ = (1 mol) × (44.01 kJ mol–1) =
44.01 kJ
DH = DU + DngRT
or DU = DH – DngRT ,
DH = 44.01 kJ mol–1 Dng = 1 R = 8.314 JK-1mol-1 = 8.314 x 10-3kJK-1mol-1
T = 298K
DU = 44.01 kJ mol–1 – 1 x 8.314 x 10-3kJK-1mol-1 x 298 K = 44.01kJ mol-1 – 2.48 kJ mol-1
DU = 41.53 kJ mol–1

Standard Enthalpy of Formation
• The standard enthalpy change for the formation of one mole of a compound
from its elements in their most stable states of aggregation (also known as
reference states) is called Standard Molar Enthalpy of Formation. Its symbol
is DfHƟ
• The reference state of an element is its most stable state of aggregation at
25°C and 1 bar pressure.
• For example, the reference state of dihydrogen is H2 gas and those of
dioxygen, carbon and sulphur are O2 gas, Cgraphite and Srhombic respectively.

Continue…
• standard molar enthalpy of formation, DfHƟ, is just a special case of DrHƟ,
where one mole of a compound is formed from its constituent elements.
• It is not an enthalpy of formation of calcium carbonate, since calcium carbonate has
been formed from other compounds, and not from its constituent elements.

Continue…
• for the reaction given below, enthalpy change is not standard enthalpy of
formation, DfHƟfor HBr(g)
• Here two moles, instead of one mole of the product is formed from the elements,
i.e., .
Dr HƟ = 2Df HƟ
• expression for enthalpy of formation of HBr (g) is written as

Continue…
• By convention, standard enthalpy for formation, DfHƟ, of an element in
reference state, i.e., its most stable state of aggregation is taken as zero.
• How much heat is required to decompose calcium carbonate?
decomposition of CaCO3 (s) is an endothermic
process

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Thermochemical Equations
 Hess’s Law of Constant Heat Summation

Thermochemical Equations
• A balanced chemical equation together with the value of its DrH is called a
thermochemical equation.
• We specify the physical state (along with allotropic state) of the substance in
an equation.
• The above equation describes the combustion of liquid ethanol at constant
temperature and pressure.
• The negative sign of enthalpy change indicates that this is an exothermic
reaction.

Continue…
remember the following conventions regarding thermochemical equations.
1) The coefficients in a balanced thermochemical equation refer to the number of
moles (never molecules) of reactants and products involved in the reaction.
2) The numerical value of DrHƟ refers to the number of moles of substances
specified by an equation. Standard enthalpy change DrHƟ will have units as kJ
mol–1.
• The unit for DrHƟ is kJ mol–1, which means per mole of reaction.
• Once we balance the chemical equation in a particular way, this
defines the mole of reaction.

Continue…

Continue…
3) When a chemical equation is reversed, the value of DrHƟ is reversed
in sign. For example

Hess’s Law of Constant Heat Summation
• Enthalpy is a state function
• Enthalpy change for a reaction is the same whether it occurs in one step or in a series
of steps.
• Statement:
• If a reaction takes place in several steps then its standard reaction enthalpy is the
sum of the standard enthalpies of the intermediate reactions into which the overall
reaction may be divided at the same temperature.

Continue…
Hess’s Law of Constant Heat Summation

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Standard Enthalpy of Combustion
 Enthalpy of Atomization
 Bond Enthalpy

Standard Enthalpy of Combustion (symbol : DCHƟ)
• Combustion reactions are exothermic in nature.
• Standard enthalpy of combustion is defined as the enthalpy change per mole (or
per unit amount) of a substance, when it undergoes combustion and all the
reactants and products being in their standard states at the specified
temperature.
• Cooking gas in cylinders contains mostly (C4H10).

Problem 6.9
The combustion of one mole of benzene takes place at 298 K and 1 atm. After
combustion, CO2(g) and H2O (l) are produced and 3267.0 kJ of heat is liberated.
Calculate the standard enthalpy of formation, Df HƟ of benzene.
Standard enthalpies of formation of CO2(g) and H2O(l) are –393.5 kJ mol–1 and – 285.83
kJ mol–1 respectively.
Solution
The formation reaction of benzene is given by :
6C graphite + 3H2 g → C6H6 l ∆fHƟ =? … … … (i)

Continue.. Solution of Problem 6.9
The enthalpy of combustion of 1 mol of benzene is
C6H6 l +
15
2
O2 → 6CO2 g + 3H2O l ; ∆cHƟ = −3267kJmol−1 … … … . . (ii)
The enthalpy of formation of 1 mol of CO2(g) :
C graphite + O2 g → CO2 g ; ∆fHƟ = −393.5 kJmol−1 … … … . . (iii)
The enthalpy of formation of 1 mol of H2O(l) is :
H2 g +
1
2
O2 g → H2O l ; ∆fHƟ = −285.83 kJmol−1 … … … . . (iv)
Using equation (ii), (iii) and (iv) we have to bring the following equation (i)
6C graphite + 3H2 g → C6H6 l ∆fHƟ =? … … … (i)
So multiply equation (iii) by 6 and (iv) by 3 and reverse equation (ii)

6C graphite + 6O2 g → 6CO2 g ; ∆rHƟ = 6 × −393.5 = −2361 kJmol−1 … … … . . (v)
3H2 g +
3
2
O2 g → 3H2O l ; ∆rHƟ
= 3 × −285.83 = −857.49 kJmol−1
… … … . . (vi)
6CO2 g + 3H2O l → C6H6 l +
15
2
O2; ∆rHƟ = +3267 kJmol−1 … … … . . (vii)
Now add equation (v), (vi) and (vii)
6C graphite + 6O2 g + 3H2 g +
3
2
O2 g + 6CO2 g + 3H2O l
→ 6CO2 g + 3H2O l + C6H6 l +
15
2
O2; ∆rHƟ = (−2361 − 857.49 + 3267) kJmol−1
6C graphite + 3H2 g → C6H6 l ; ∆fHƟ = 48.51 kJmol−1

Alternate method
Given DfHƟ CO2(g) = –393.5 kJ mol–1 and DfHƟ H2O(l) = – 285.83 kJ mol–1 , DfHƟ
O2 g = 0
∆rH
Ɵ
= 6 × ∆fH
Ɵ
CO2 + 3 × ∆fH
Ɵ
H2O − [∆fH
Ɵ
C6H6 +
15
2
× ∆f H
Ɵ
O2 ]
−3267 = 6 × −393.5 + 3 × −285.83 − ∆fH
Ɵ
C6H6 + 0
−3267 = −2361 + −857.49 − ∆fH
Ɵ
C6H6 + 0
∆fH
Ɵ
C6H6 = −3218.49 + 3267 = 48.51k Jmol−1

Enthalpy of Atomization (symbol: DaHƟ)
• It is the enthalpy change on breaking one mole of bonds completely to obtain atoms in
the gas phase.
• In case of diatomic molecules, like dihydrogen , the enthalpy of atomization is also the
bond dissociation enthalpy.
• Other examples
In this case, the enthalpy of atomization is
same as the enthalpy of sublimation

Bond Enthalpy (symbol: DbondHƟ)
(i) Bond dissociation enthalpy
(ii) Mean bond enthalpy
(i) Bond dissociation enthalpy
• For diatomic molecules the bond dissociation enthalpy is the change in enthalpy
when one mole of covalent bonds of a gaseous covalent compound is broken to
form products in the gas phase.
it is the same as the
enthalpy of atomization

(ii) Mean bond enthalpy
• Used for Polyatomic Molecules
• In methane, all the four C – H bonds are identical in bond length and energy.
However, the energies required to break the individual C – H bonds in each
successive step differ :

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Lattice Enthalpy
 Born-Haber Cycle
 Enthalpy of Solution
 Enthalpy of Dilution

Lattice Enthalpy
• The lattice enthalpy of an ionic compound is the enthalpy change which
occurs when one mole of an ionic compound dissociates into its ions in
gaseous state.
• Since it is impossible to determine lattice enthalpies directly by
experiment, we use an indirect method where we construct an enthalpy
diagram called a Born-Haber Cycle

The importance of the cycle is that, the
sum of the enthalpy changes round a
cycle is zero.

Enthalpy of Solution (symbol : DsolHƟ )
• Enthalpy of solution of a substance is the enthalpy change when one mole of
it dissolves in a specified amount of solvent.
• The enthalpy of solution at infinite dilution is the enthalpy change observed
on dissolving the substance in an infinite amount of solvent when the
interactions between the ions (or solute molecules) are negligible.

• For most of the ionic compounds, Dsol HƟ is positive and the dissolution
process is endothermic.
• Therefore the solubility of most salts in water increases with rise of
temperature.
• If the lattice enthalpy is very high, the dissolution of the compound may
not take place at all.
Continue…
Enthalpy of Solution (symbol : DsolHƟ )

Enthalpy of Dilution
• It is the heat change when additional solvent is added to the solution.
• The enthalpy of dilution of a solution is dependent on the original
concentration of the solution and the amount of solvent added.
• Enthalpy change for dissolving one mole of gaseous hydrogen chloride in
10 mol of water (10 aq.)
• The values of enthalpy of solution depend on amount of solvent.
• Enthalpy of solution approaches a limiting value, i.e, the value in infinitely dilute
solution(S-3)

Subtract equation S-1 from the equation S-2 we
obtain–
Continue…
Enthalpy of Dilution
• This value (–0.76kJ/mol) of DH is enthalpy of dilution.

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Spontaneous Process
 Criterion for Spontaneity-Driving force for
spontaneous process
 Entropy

Spontaneous Process
• A spontaneous process is one that occurs on its own or once started
proceeds, without the external input of energy.
• It cannot be reversed on its own. It is unidirectional
• All natural processes are spontaneous.
• For example,
• a gas expanding to fill the available volume,
• burning carbon in dioxygen giving carbon dioxide
• Rolling of ball downhill
• Rusting of iron
• Freezing of water at temperatures below 0oC
• Melting of ice

Criterion for Spontaneity-Driving force for spontaneous
process
Decrease in Enthalpy
• Spontaneous physical process
• flow of water down hill
• fall of a stone on to the ground
• there is a net decrease in potential energy in the direction of
change.
• Exothermic chemical reactions are
spontaneous because decrease in energy
has taken place
• Driving force for a spontaneous process is
‘decrease in energy (enthalpy)’ i.e. - ΔH

• Now examine the following reactions:
• The reaction between solid barium hydroxide octahydrate and solid ammonium
thiocyanate is endothermic and spontaneous.
• While most acid-base reactions are exothermic, the reaction of baking soda with
vinegar is endothermic.
• Dissolution of Common salt into water is endothermic and spontaneous
Continue…
Criterion for Spontaneity-Driving force for spontaneous
process
Decrease in Enthalpy
• These reactions though endothermic (ΔH is positive), are spontaneous.
• Therefore, it is concluded that decrease in enthalpy may be a contributory factor for
spontaneity, but it is not true for all cases.

Continue…
Criterion for Spontaneity-Driving force for spontaneous process
Another criteria
• examine such a case in which DH = 0 i.e., there is no change in enthalpy, but still
the process is spontaneous.
• Consider diffusion of two gases into each other in a closed container which is
isolated from the surroundings

Continue…
Criterion for Spontaneity-Driving force for spontaneous process
Another criteria
• We may now formulate another postulate:
• in an isolated system, there is always a tendency for the systems’ energy to
become more disordered or chaotic and this could be a criterion for
spontaneous change !
• To express this disorder of system, another thermodynamic term is used
which is called Entropy

Entropy (S)
• Entropy is a measure of the degree of randomness or disorder in the system.
• The greater the disorder in an isolated system, the higher is the entropy.
• Qualitatively, Order of entropy :-Solid(lowest entropy) < Liquid < gas (highest entropy)
• Entropy is a state function and DS is independent of path.
• Whenever heat is added to the system, it increases molecular motions causing increased
randomness in the system.
• A system at higher temperature has greater randomness in it than one at lower temperature.
• Heat added to a system at lower temperature causes greater randomness than when the
same quantity of heat is added to it at higher temperature.
• This suggests that the entropy change is inversely proportional to the temperature.

• DS is related with q and T for a reversible reaction as
• The total entropy change ( DStotal) for the system and surroundings of a spontaneous
process is given by
• When a system is in equilibrium, the entropy is maximum, and the change in entropy,
DS = 0.
• Entropy for a spontaneous process increases till it reaches maximum and at equilibrium
the change in entropy is zero.
• Since entropy is a state property, we can calculate the change in entropy of a reversible
process by
Continue…
Entropy (S)

Continue…
Entropy (S)
• Both for reversible and irreversible expansion for an ideal gas, under isothermal
conditions, DU = 0, but DStotal i.e., DSsys + DSsurr is not zero for irreversible process.
• Thus, DU does not discriminate between reversible and irreversible process, whereas DS
does.
• DStotal > 0 Process is spontaneous
• DStotal < 0 Process is Non-spontaneous
• DStotal = 0 System is in equilibrium
• DSsys alone can not decide the spontaneity of the process for closed and open system.
• Conclusion:-neither decrease in enthalpy nor increase in entropy of the system alone
can determine the direction of spontaneous change for closed and open systems

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Gibbs Energy
 Gibbs Energy and Spontaneity
 Effect of Temperature on Spontaneity of
Reactions

Gibbs Energy or Gibbs Function, G
• G = H – TS Gibbs function, G is an extensive property and a state
function.
• Its absolute value also can not be determined.
• The change in Gibbs energy for the system, DGsys can be written as
DG has units of energy i.e J
• DH is the enthalpy change of a reaction, TDS is the energy which is not available to do useful
work.
• So DG is the net energy available to do useful work and is thus a measure of the ‘free
energy’.
• For this reason, it is also known as the free energy of the reaction.

Gibbs Energy and Spontaneity
• If the system is in thermal equilibrium with the surrounding, then the temperature of the
surrounding is same as that of the system.
• Also, increase in enthalpy of the surrounding is equal to decrease in the enthalpy of the
system.
• Therefore, entropy change of surroundings,

Continue…
Gibbs Energy and Spontaneity
• DStotal > 0 Process is spontaneous DG < 0
(Negative)
• DStotal < 0 Process is Non-spontaneous DG > 0
(Positive)
• DStotal = 0 System is in equilibrium DG = 0
(Equilibrium)

Effect of Temperature on Spontaneity of Reactions

Class XI Chemistry
Unit 6
THERMODYNAMICS
• Topic:-
 Second Law of Thermodynamics
 Third Law of Thermodynamics
 Gibbs Energy Change And Equilibrium

Entropy and Second Law of
Thermodynamics
• Entropy is the loss of energy available to do work.
• Another form of the second law of thermodynamics states that the
total entropy of a system either increases or remains constant; it never decreases.
• Entropy is zero in a reversible process; it increases in an irreversible process.
• Entropy of any isolated system always increases.
• In exothermic reactions heat released by the reaction increases the disorder of the
surroundings and overall entropy change is positive which makes the reaction
spontaneous.

Absolute Entropy and Third Law of Thermodynamics
• The entropy of any pure crystalline substance approaches zero as the
temperature approaches absolute zero. This is called third law of
thermodynamics.
• The importance of the third law is that absolute values of entropy of pure
substance can be determined.

GIBBS ENERGY CHANGE AND
EQUILIBRIUM
• Reversible chemical reaction is the reaction which can proceed in either
direction simultaneously that is reactants convert into products and products
convert in to reactants at the same rate, so that a dynamic equilibrium is set up.
• This means that the reactions in both the directions should proceed with a
decrease in free energy, which seems impossible.
• It is possible only if at equilibrium the free energy of the system is minimum.
• So, the criterion for equilibrium
A + B ⇌ C + D ; is DrG = 0

Continue…
GIBBS ENERGY CHANGE AND
EQUILIBRIUM
• Gibbs energy change for a reaction in which all reactants and products are in standard
state, is known as Standard Gibbs energy change DrGƟ
• It is related to the equilibrium constant of the reaction as follows:
DrG = DrGƟ + RT ln K at equilibrium DrG =0 so, DrGƟ= – RT ln K
or DrGƟ = – 2.303 RT log K where K = equilibrium constant
DrGƟ = DrHƟ - T DrSƟ = – 2.303 RT log K
• For strongly endothermic reactions, the DrHƟ large and positive, value of K << 1 and the
reaction is unlikely to form much product.
• In case of exothermic reactions, DrHƟ large and negative, and DrGƟ large and negative, K
>> 1 hence can go to near completion.

Problem 6.12
Calculate DrGƟ for conversion of oxygen to ozone, 3/2 O2(g)  O3(g) at 298
K. if Kpfor this conversion is 2.47 × 10−29.
Solution
We know DrGƟ = – 2.303 RT log Kp and R = 8.314 J K−1
mol−1
Therefore, DrGƟ = – 2.303 (8.314 J K−1mol−1)× (298 K) (log 2.47 × 10−29)
= 163000 J mol−1
= 163 k J mol−1

Problem 6.13
Find out the value of equilibrium constant for the following reaction at 298 K.
Standard Gibbs energy change, DrGƟ at the given temperature is –13.6
k J mol−1
.
Solution
DrGƟ = – 2.303 RT log K
log K = −
DrGƟ
2.303 RT
= −
−13.6×103Jmol−1
2.303×8.314 JK−1mol−1×298 K
= 2.38
K = antilog 2.38 = 2.4 × 102

How to
Solve log
and antilog
By Vijay
Kumar Sethi

𝑙𝑜𝑔
𝑛
𝑚
= log 𝑛 − log 𝑚
log 𝑛 × 𝑚 = log 𝑛 + log 𝑚
log 𝑥𝑛
= 𝑛 log 𝑥
log 2467= 3.3909 +0.0012=3.3921
log 382.4 = 2.5821 + 0.0005=2.5826
log 55.2 =1.7419
log 2.03=0.3075
log 0.02453=log(2.453 × 10−2) = log 2.453 + log10−2
= log 2.453 + −2 log 10
= 0.3892 + 0.0005 − 2 1.0000
= 0.3897 − 2 = −1.6103
log 5 = log 5.000 = 0.6990
log 0.2 = log (2 × 10−1) = log 2 + −1 log 10 = 0.3010 − 1 = −0.699

Anti-log table
antilog 5.2345 =1.716 × 105
antilog 15.5933 = 3.92 × 1015
antilog 15 =antilog 15.000=1.000× 1015
𝑎𝑛𝑡𝑖𝑙𝑜𝑔 −4.42 =?
−4.42 = −4.00 − 0.42
−1 + 1
−4.42 = −5.00 + 0.58 = 5. 58
𝑎𝑛𝑡𝑖𝑙𝑜𝑔 −4.42 = 𝑎𝑛𝑡𝑖𝑙𝑜𝑔(5. 58)
= 3.802 × 10−5

Class 11 Chapter 6 Thermodynamics.pptx h

More Related Content

Similar to Class 11 Chapter 6 Thermodynamics.pptx h (20)

Recently uploaded (20)

Class 11 Chapter 6 Thermodynamics.pptx h