Compressor ISO VG 100 (Material Safety Data Sheet)
0 likes1,997 views
This document provides a material safety data sheet for Liqtro Compressor 100 ISO VG 100 lubricant. It identifies the product as an ashless lubricant for compressors that does not contain any hazardous ingredients according to European regulations. The document lists the product identification and company details, summarizes that there are minimal health and environmental hazards, and provides guidance on handling, storage, exposure controls, and disposal of the product.
Compressor ISO VG 100 (Material Safety Data Sheet)
- 1. MATERIAL SAFETY DATA SHEET PRODUCT NAME : LIQTRO COMPRESSOR 100 ISO VG 100 REV. 01ST AUGUST 2005 ----------------------------------------------------------------------------- 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION --------------------------------------------------------------------------------------------- PRODUCT DESCRIPTION: Ash less Lubricant for Screw and Reciprocating Compressor, which has been developed specifically for the preparation of Premium Hydraulic Lubricants used in Industrial Power Transmission Applications. COMPANY IDENTIFICATION: Smessindo Sakti Mandraguna BLENDING PLANT and LABORATORY DIVISION Jln. Diponegoro KM 40 No. 62 Tambun-Bekasi 17510 Phone. 62-21 8808620 Fax. 62-21- 88354786 OFFICE Menara Era Building # 10-03 Jl. Raya Senen Kav. 135-137 Jakarta 10410 Phone. 62-21-3862426, Fax: 62-21-3863448 ------------------------------------------------------------------------------- 2. HAZARDS IDENTIFICATION ------------------------------------------------------------------------------- HEALTH HAZARDS • No significant effects expected ENVIRONMENTAL HAZARDS • This preparation does not require classification on the basis of environmental hazard. PHYSICAL AND CHEMICAL HAZARDS / FIRE AND EXPLOSION HAZARDS • Low hazard. Material can form flammable mixtures or can burn only upon heating to temperatures at or above the flash point. This product does not contain any hazardous ingredient as the regulation from European Union Dangerous Substance / Preparation Directive. ------------------------------------------------------------------------------ 3. FIRST AID MEASURES ------------------------------------------------------------------------------- INHALATION : • Not expected to be a problem in well-ventilated area. Using proper respiratory protection, immediately remove the affected from overexposure victim. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention. SKIN CONTACT : • In case of frequent or prolonged contact, flush with large amounts of water; use soap if available. EYE CONTACT : • Immediately flush eyes with large amounts of water for at least 15 minutes. Get prompt medical attention. INGESTION : • If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical attention. If greater than 0.5 liter ingested, immediately give 1 or 2 glasses of water and call physician and hospital for assistance. Page 1 of 4
- 2. MATERIAL SAFETY DATA SHEET PRODUCT NAME : LIQTRO COMPRESSOR 100 ISO VG 100 REV. 01ST AUGUST 2005 ------------------------------------------------------------------------------- 4. FIRE-FIGHTING MEASURES ------------------------------------------------------------------------------- Fire Extinguisher : Carbon Dioxide, foam, dry chemical and water fog Fire Fighting Procedure : • Use water spray to cool fire exposed surfaces and to protect personnel. • Use foam, dry chemical, or water spray to extinguish fire source. SPECIAL FIRE PRECAUTIONS: • Respiratory and eye protection required for fire fighting personnel. • Avoid spraying water directly into storage containers due to danger of boil over. • Prevent runoff from fire or dilution from entering streams, sewers, or drinking water supply. Special Protector Equipment : The fireman have to wear Self Contained Breathing Apparatus (SCBA) Explosion and another fire danger : Toxic Fumes Flash Point, o C : 231 (ASTM D-92) Flammable limits –LEL : none UEL : none NFPA Hazard ID : Health : 2, flammability : 1, Reactivity : 0 Hazardous Material Decomposition : Carbon Monoxide, Another Oxide ------------------------------------------------------------------------------- 5. SPILL AND LEAKAGE HANDLING ------------------------------------------------------------------------------- Procedure note : Report the spill happened according to system and procedure decided. If the spill could be enter the aqueduct or river, please report to authority officer as soon as possible. Leakage and Spill Procedure : Absorb the spill by saw-dust, clay, and another fire resistant material. Clean up and discard to the location that have been decided. Prevention on Environment : Prevent the spill entering the gutter, waste canal, and into the soil. ------------------------------------------------------------------------------- 6. HANDLING AND STORAGE ------------------------------------------------------------------------------- STORAGE TEMPERATURE (Deg C) : 60.0 Maximum TRANSPORT TEMPERATURE (Deg C) : 60.0 Maximum LOADING/UNLOADING TEMPERATURE (Deg C) : 60.0 Maximum STORAGE/TRANSPORT PRESSURE (k Pa) : Atmospheric STORAGE / HANDLING, GENERAL NOTES : • Keep container closed. Handle containers with care. Open slowly in order to control possible pressure release. Store in a cool, well-ventilated place away from incompatible materials. • DO NOT handle, store or open near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight. • DO NOT pressurize, cut, heat, or weld containers. Empty product containers may contain product residue. DO NOT reuse empty containers without commercial cleaning or reconditioning. ------------------------------------------------------------------------------- 7. EXPOSURE CONTROL / SELF PROTECTION ------------------------------------------------------------------------------- Ventilation : Commonly there is no special regulation for ventilation on normal condition Breath Protection : There is no special regulation on normal condition. Eye Protection : Use eye protection equipment. Skin Protection : Regulation for personnel hygiene still have to give a notice. Use the nitrile gloves, long arm shirt, boots. Don’t use ring or watch because it can make skin reaction. Exposure limit : This product doesn’t contain any material that have been known have exposure limit value. But we can use exposure limit value (OSHA PEL) from the vapor, i.e 5.00 mg/m3 and ACGIH STEL, i.e. 10 mg/m3. Page 2 of 4
- 3. MATERIAL SAFETY DATA SHEET PRODUCT NAME : LIQTRO COMPRESSOR 100 ISO VG 100 REV. 01ST AUGUST 2005 ------------------------------------------------------------------------------- 8. PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------------- These are indicative values only. Please refer also to the product specification sheet. Property LIQTRO COMPRESSOR 100 Physical State Liquid Color (ASTM D 1500) 2.0 Odor Mild hydrocarbon Boiling Point > 316 Deg C Typical Flash Point (COC, ASTM D 92) > 200 Deg C Minimum Material Hygroscopic No 3 Density (15 Deg C, ASTM D 4052) 0.8814 g/cm 0 Viscosity at 40 C (ASTM D 445) 98.82 cSt 0 Viscosity at 100 C (ASTM D 445) 11.30 cSt Viscosity Index (ASTM D 2270) 100 Foaming Tendency/stability (ASTM D 892) Seq. I 35/0 ml Seq. II 10/0 ml Seq. III 25/0 ml ------------------------------------------------------------------------------- 9. STABILITY AND REACTIVITY ------------------------------------------------------------------------------- HAZARDOUS POLYMERIZATION : No STABILITY (THERMAL, LIGHT, ETC) : Stable CONDITION TO AVOID : Extreme Heat MATERIALS AND CONDITIONS TO AVOID (INCOMPATIBILITY) : Strong oxidizing agents. ------------------------------------------------------------------------------- 10. TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------------- INHALATION : • Negligible hazard at ambient (-20 to 60 Deg C) or recommended blending temperature. WARNING : • Repeated and prolonged overexposure to oil mists may result in droplet deposition, oil granuloma formation, inflammation and increased incidence of infection. SKIN CONTACT : • Low order of toxicity. • Frequent or prolonged contact may cause mild skin discomfort. EYE CONTACT : • mild irritation. If not removed promptly, will injure eye tissue, which may result in permanent damage. INGESTION : • Minimal toxicity. ------------------------------------------------------------------------------ 11. ECOLOGY INFORMATION ------------------------------------------------------------------------------- Impact and damage on environment : Non-toxic---- based on testing of similar material and component. Page 3 of 4
- 4. MATERIAL SAFETY DATA SHEET PRODUCT NAME : LIQTRO COMPRESSOR 100 ISO VG 100 REV. 01ST AUGUST 2005 ------------------------------------------------------------------------------- 12. DISPOSAL CONSIDERATIONS ------------------------------------------------------------------------------- • This product is NOT suitable for disposal by either landfill or via municipal sewers, drains, natural streams or rivers. • This product will generate an ash if burned. • It can be burned directly in appropriate equipment. ------------------------------------------------------------------------------ 13. REGULATION INFORMATION ------------------------------------------------------------------------------- based on U.S. Superfund Amendment and Reauthorization Act (SARA) this product doesn’t contain EXTREMLY HAZARDOUS more than 1% Additional information is available on special request --------------------------------------------------------------- Page 4 of 4