Connecting your mac book to your smart board interactive1
2 likes15,322 views
The document provides instructions for connecting a MacBook to a Smart Board interactive whiteboard. It lists the ports on a MacBook and the cables needed including a VGA cable, mini DVI adapter, audio cable, and USB cable. It provides steps to connect the cables from the MacBook to the Smart Board, power on both devices, and ensures the Ready Light is solid green when setup is complete.
Connecting your mac book to your smart board interactive1
- 1. Connecting your Mac book to a Smart Board interactive White board Prepared by Noemi Szoychen 2011
- 3. Additional components of your MacBook Mini-DVI port Power adapter Sound/Headphone out port port/jack 2 USB 2.0 Ports Ethernet port Security slot
- 4. Powering on your MacBook Press the power button briefly to turn on your MacBook. Connect the Ac Power adapter cord to the Power port AC power adapter charger AC power cord Power button
- 5. Interactive White board connectivity cables VGA cable Audio cable Mini DVI These cables are used to adapter carry the signal and sound connects from the PC or MacBook to Macbook to the Projector or SmartBoard Projector Captive USB cable VGA cable and Mini DVI Audio Cable
- 6. Connecting Important: Before you start make sure that your MacBook should be power off Sound cable to sound port Mini DVI cable to USB cable to USB port Mini DVI port Step 1 Step 2 Step 3
- 7. Connecting cont... If the Ready Light is a solid green your system is functioning properly. If the Ready Light is flashing or is a color other than green for an extended period of time Power on MacBook Power on SmartBoard by You hear a tone when you turn on the NOTE: It is normal for the Ready pressing red button on computer. Don’t press the power button Light to turn red during initial remote control after power up because the SMART the startup tone or you might cause the Board interactive whiteboard computer to shut down again. and the computer are establishing It takes the computer a few moments to communication. start up Step 4 Step 5 Step 6