Conole connected june_2010

Learning design – making practice explicit
Gráinne Conole, The Open University, UK
g.c.conole@open.ac.uk

Paper to be presented at the ConnectEd conference in Sydney on 28th June 2010
Digital copy and Powerpoint presentation at http://cloudworks.ac.uk/cloud/view/4001

Abstract
New technologies have immense potential for learning, but the sheer variety possible also
creates challenges for learners in terms of navigating through an increasingly complex
digital landscape and for teachers in terms of how to design and support learning
interventions. How can learners and teachers make informed decisions about what
technologies to use in the design and support of learning activities? This presentation will
consider this question and present a new methodology for design – ‘learning design’,
which aims to shift the creation and support of learning from what has traditionally been
an implicit, belief-based practice to one that is explicit and design based. Learning design
research at the Open University, UK has included the development of a set of conceptual
design views, a tool for visualising designs (CompendiumLD) and a social networking
site, for sharing and discussing learning and teaching ideas and designs (Cloudworks). An
overview of this work will be provided, along with a discussion of the perceived benefits
of this new approach to educational design.

Introduction
This paper describes a new methodology (learning design) for designing and reusing
learning interventions. It contextualises this in terms of related research work,
particularly instructional design, learning sciences, learning objects/Open Educational
Resources and professional support networks. It provides a rationale for adopting a
learning design approach, which aims to provide a more holistic approach to the design
process, taking account of the perspectives and needs of all stakeholders involved in the
design lifecycle (the designer, the learner, those involved in facilitating and supporting
the learning process, assessment and accreditation of the learning).

The paper cuts across a number of the themes of the ConnectEd conference
(http://www.connected2010.com.au/). Firstly the theme e-learning and technology in
design education, in terms of exploration of how e-learning and technologies can act as a
trigger for fostering new and innovative approaches to educational design. Secondly, the
theme learning creativity and design and in particular how the learning design
methodology outlined specifically aims to help designers take a more creative and
holistic approach to design, which goes beyond a focus on content. Finally it touches on
the theme design and community development, in particular focusing on the work that we
have been doing to harness web 2.0 practices to support community interaction and
engagement and to encourage great discussing and sharing of design ideas and examples.

1

The context of modern education
Many are arguing that there is a need for a fundamental change in the way in which we
design and support learning interventions. That traditional outcomes-based, assessment
driven and standardised educational systems and processes do not meet the needs of
today’s learners (Borgeman, et al., 2008; Beetham and Sharpe, 2007; Sharpe and
Beetham. forthcoming). A number of triggers are evident. Firstly, there is the broader
societal context within which educational sits. Giddens (1999), Castells (2000) and others
describe the networked and globalised nature of modern society, and the impact of the
changing nature of society values (including the defragmentation of the family unit,
polarised perspectives on secular vs. religion-based beliefs, changing roles for individuals
and organisations).

Reigeluth (2009: 390) argues that we have seen a shift from the industrial to information
age, where knowledge work has replaced manual labour as the predominant form of
work. Within this context he argues that we need to place a greater emphasis on lifelong
and self-directed learning. The greater complexity of modern society (both in terms of
societal systems and technological tools) requires specific types of competences to make
sense of and interact within this context, such as higher order thinking skills, problem
solving, systems thinking and the ability to communicate, collaborate and interact
effectively with others. Within this broader societal context there are a number of specific
triggers influencing and shaping the context of modern education. Firstly, in terms of
approaches to learning there has been a general shift away from individual, behaviourist
approaches to those that are more authentic, contextual and social in nature.
Constructivist and dialogic approaches have become more prevalent, with a rich set of
empirically based case studies of applications of strategies such as problem-based
learning, case-based scenarios and inquiry-based learning. Secondly, over the past thirty
years or so technologies have had a steady, increasing impact on how learning is
designed and supported, from the early days of programme instruction and computer-
assisted learning packages through to the use of the Web and more recently Web 2.0 tools
and services, online gaming environments, mobile devices and 3D environments such as
SecondLife. As a consequence a body of research around the competences and skills
needed to effective use and interact these new technologies has emerged. Terms such as
digital literacies, information literacies, 21st Century literacies have been used, each with
subtle nuances and different foci. However fundamentally the central issue is about the
literacies needed to communicate with others and make sense of information (and more
specifically how to do this in a digital context). Of particular note within this broader
discourse, Jenkins et al. (2008: 4) have identified twelve skills which they argue are
necessary to interact in what they term this new participatory culture, namely – play,
performance, simulation, appropriation, multitasking, distributed cognition, collective
intelligence, judgment, transmedia navigation, networking and negotiation. The executive
summary to the report states that ‘fostering such social skills and cultural competences
requires a more systemic approach to media education (pg 4). This is at the heart of the
learning design methodology approach outlined here. The aim is to present a more
systematic approach to the educational design taking account of all the stakeholders
involved in the process.

2

To sum up, because the context of modern education is rapidly changing, traditional
approaches to the design and delivery of learning interventions are being challenged and
may no longer be appropriate to meet the needs and expectations of modern learners.
New pedagogies and innovative use of technologies seem to offer much promise in terms
of providing new, exciting educational experiences for learners. However in reality there
is little evidence of this happening. Educational innovations in both pedagogical
approaches and innovative use of technologies remain the remit of educational innovators
or early adopters, there is little evidence of mainstream adoption and indeed depressingly
taken as a whole the majority of educational offerings are still based on fairly traditional
approaches, with a primary focus on content and assessment of outcomes, delivered via
traditional didactic approaches (See for example a recent review of the use of Web 2.0
tools in Higher Education, Conole and Alevizou, 2010).

The broader design perspective
The central argument of this paper is that adopting a more principled, design-based
approach to teaching and learning processes might offer a solution to enabling
practitioners to make more informed choices about their creation of learning
interventions and better use of good pedagogy and new technologies. Before outlining
our learning design methodology, it is important first to consider the broader definition of
what is meant by design practice and examples of how it is used in other disciplines.

Design theory refers to identifying methods (or models, techniques, strategies and
heuristics) and when to use them. Reiguluth (2009: 7) argues that design theory is
different from descriptive theory, in that it is goal oriented and normative. It identifies
good methods for accomplishing goals, whereas descriptive theory describes cause-effect
relationships. Arguably teachers need to develop both – design expertise through
application of a design-based approach to the creation of learning interventions and
descriptive expertise in terms of interpreting and understanding the learning that takes
place. The learning design methodology described in this paper aims to facilitate the
development of both approaches.

In this paper I want to argue that we need a more formal design language for education,
to make more explicit and sharable design intentions and to enable designers and users of
designs to understand their context of use, their origins, and their intentions. This section
provides a definition for the term design language and provides examples of how it is
used in other professional domains.

Design is a key feature of many professions and in terms of specifically exploring the
design aspects in an educational context. I would like to first consider design practices in
related fields. I focus here in particular on three disciplines: Music, Architecture and
Chemistry and describe how design approaches have been developed in each of these. I
then summarise some of the key characteristics of design practice that emerge and
explore the implications of these in terms of the application of design principles to an
educational context.

3

It is worth beginning by comparing general language use with design language. Language
is what people use for communicating information and ideas, design language is what
designers use to communicate design plans, and intentions to each other. Cole,
Engestrom and Vasques argue that ‘the Languages used to a great extent shapes what can
and cannot be thought and said’ (cited in Gibbons and Brewer, 2005: 113)
Design Languages can be used to both generate designs and as a mechanism for
interpreting and discussing them. They are used in a range of professions, where there is
a focus on developing a specific artefact of some kind. Examples include architecture,
music composition, writing, choreography, mathematics and computer programming.
With reference to the design of software systems, Winograd (1996) argues that design is
not a static noun but about the activity of design. He identifies a number of important
aspects: design as a conscious process, design as dialogue with materials, design as a
creative process, design as a communicative process and design as social activity. He
describes design languages as ‘visual and functional languages of communication with
the people who use an artefact. A design language is like a natural language, both in its
communicative function and in its structure as an evolving system of elements and
relationships among those elements’ (Winograd, 1996: 64).

I now want to turn to some examples of how design languages are used in other
professions. I will consider three examples – the development of musical notation,
architectural designs and design in chemistry.

Musical notation captures abstract musical designs in the form of graphical, textual and
symbolic representations. It is precise enough that a piece of music written by a composer
from 300 or 400 hundred years ago can be accurately replayed. Early musical notations
can be traced back to 2000 BC, but the standard notation used today is a relatively recent
phenomenon, before its development, music had to be sung from memory. This severely
limited the extend and reach of music, as well as resulting in a loss of fidelity of the
original music as they changed from person to person memorising them. Musical notation
went through a range of forms before settling on the notations we use today. The notation
includes a complex set of instructions about not just the notes to be played and their
sequence, but the timing, intonation and even some of the emotion embodied in the
music.

Architectural notation helps articulate and share an Architect’s origin vision behind the
development of a building and make that explicit and sharable with others involved in the
design and development of the building. Buildings are complex and 3-dimensional.
Design decisions have to cover a range of factors, such as the layout of the building, the
relationship between the different components, the types of materials, the nature of the
surrounding situation of the site. Different designs are therefore needed to relate certain
elements of the design to each other while ignoring others, and these allow the designer
to see their creation from different perspectives. 3-D visual representations are often
annotated with text and supplemented by tables of data. In recent years design
representations in Architecture have being computerised with the emergence of
sophisticated Computer Assisted Design tools. Arguably use of these CAD tools has

4

influenced the practice of design, in addition to facilitating more effective sharing of
designs.

Chemists use a number of design representations, from chemical symbols for individual
atoms, through various visual representations for displaying molecules and chemical
equations for the design of chemical synthesis and for explanation of particular chemical
properties. As with music and architecture the design representations that have been
developed closely mapped to the discipline itself and the key focus of interest. So
chemistry is fundamentally concerned with the properties and chemical behaviours of
individual atoms and how these can combine in different ways to create molecules with
different properties. 2-D representations are common (for example chemical equations)
but 3-D representations are also useful and particularly valuable when looking at large
molecules with complex typologies. As in architecture a number of computer-based tools
have now been developed to enable drawing and manipulation of molecules. These can in
some instances be based on real data, such as individual atomic coordinates of individual
atoms and so are also powerful modelling tools.

Gibbons and Brewer (2005: 121) argue that once a notational system is established it can
become i) a tool for remembering designs, ii) a structured problem-solving work space in
which designs can take form and be shared, iii) a kind of laboratory tool for sharpening
and multiplying abstract design language categories. Indeed in the examples cited above
it is evident that there is a complex evolution of design languages and associated
notations, and that this evolution is closely tied to the nature of the subject domain and
what is of particular importance. So for music it is ensuring the accurate representations
of the sounds in time, for architecture it is seeing the ways in which the different
components connect and how they look overall and in chemistry it is about foregrounding
the associated chemical properties and patterns of behaviour of the atoms and molecules.

Gibbons and Brewer (2005: 115) list a set of dimensions of design languages. The first is
complexity, namely that design are merely partial representation of much more complex,
and multifaceted ideas in our minds. The second is precision, there is a tension between
the natural, fuzzy nature of real practice and tightly defined specification. This tension is
very evident in an educational context as described later, in particular in the specification
of formal technical learning designs that can be translated into machine-readable code
and fuzzy, practice-based designs. The third is formality and standardisation, which refers
to the importance of ensuring that terms used mean the same to all users. The fourth is the
tension between personally created designs and those that are shared with others. Designs
only become public or sharable through negotiation and interaction with others. Designs
should never be seen as static artefacts and are always dynamic and co-constructed in
context. The fifth is the tension between implicit, individual designs to those which are
completely explicit with clearly defined terms and rules. Again this is a crucial issue in an
educational context, where traditional teaching practice has been implicit and designs
fuzzy. Shifting to more explicit and sharable designs requires a change of mindset and
practice. Related to this are issues around standardisation vs. non-standardisation. In
terms of these points, there is a tension with designs in terms of how much they focus on
precise presentation, specification and how much on the more aesthetic, visionary aspects

5

of the design. Derntl et al. (2008), consider this in an instructional design context, arguing
that ‘On the one hand, solutions should be creative, effective and flexible; on the other
hand, developers and instructors need precise guidance and details on what to do during
development and implementation. Communication of and about designs is supported by
design languages, some of which are conceptual and textual, and others more formal and
visual.’ They present a case study where both a creative solution (“beauty”) and clear-cut
details (“precision”) are sought. Finally there are issues around computability. Some
languages are so formalised and precise that they can be converted into machine runnable
code. Gibbons and Brewer (2005: 118) go on to argue that designs can be shared in two
ways i) by a description that relies on natural language or ii) through a specialised
notation system that uses figures, drawings, models or other standard symbolic
representations to express the elements and relationship of the design.

Designs have a number of components. Firstly the context in which the design is created
and used; i.e. a design carries with it a socio-cultural element – the background and
context, both of the individual and the educational setting. Secondly the inherent beliefs
of the designer; i.e. a design carries with it intentions, aspirations and beliefs. In a
learning content this is the designer’s beliefs about what should be learnt and how it
should be achieved. Donald and Blake (2009) see this inherent belief basis of teaching
practice as a vital tool for unlocking and shifting practice. They have developed a
learning design system, HEART (HEaring And Realising Teaching-voice) which aims to
support teachers learning design practice by eliciting and depicting the pedagogical
beliefs underpinning a learning design or a resource. In an educational context our
implicit designs are based on a mix of theoretical concepts, prior examples, personal
ideals and idiosyncratic opinions. Finally, designs should encourage reflection and should
support iterative redesign and reuse.

Approaches to promoting good teaching practices
Having described design practice in a number of fields, this section looks explicitly at the
ways in which learning and teaching innovations have been promoted and supported. It
considers the strategies that have been used to scaffold teaching practice to ensure
effective use of good pedagogy and to promote innovative use of new technologies.
Whilst not intending to be exhaustive this section aims to give a flavour and overview of
some of the approaches, before introducing learning design as an alternative approach. It
is important to note that learning design as a methodology does not seek to replace these
existing approaches, but instead intends to draw on them using a theoretical framework
which focuses on the mediating artefacts used in learning and teaching. Learning design
is intended to be a holistic approach, covering all stakeholders involved in the learning
and teaching process.

The approaches discussed in this section are:
• Instructional Design
• Learning Sciences
• Learning Objects and Open Educational Resources
• Professional networks and support centres

6

Instructional Design
Instructional Design has a long history as an approach to systematically designing
learning interventions. It has been defined as ‘The process by which instruction is
improved through the analysis of learning needs and systematic development of learning
materials. Instructional designers often use technology and multimedia as tools to
enhance instruction’ (Instructional Design, nd). Reiser (2001a) defines Instructional
Design as encompassing ‘the analysis of learning and performance problems, and the
design, development, implementation, evaluation and management of instructional and
non-instructional processes and resources intended to improve learning and performance
in a variety of settings’. He identifies two practices that form the core of the field, i) the
use of media for instructional purposes, ii) the use of systematic instructional design
processes (Reiser, 2001b).

Instructional designers design instruction to meet learning needs for a particular audience
and setting. Learning design, in contrast, as described later, takes a much broader
perspective and sees design as a dynamic process, which is ongoing and inclusive, taking
account of all stakeholders involved the teaching-learning process. Instructional Design
tends to focus more on the designer as producers and learners as consumer. A number of
key features characterise or help define Instructional Design as an approach.

Van Merrienboard and Boot (2005: 46) describe Instructional Design as an analytical
pedagogical approach. This includes the development and evaluation of learning
objectives. A key milestone was Bloom’s Taxonomy of Educational Objectives (Bloom,
1956; Anderson and Krathwohl, 2001). In 1965 Gagné published his conditions of
learning, describing five domains of learning outcomes (verbal information, intellectual
skills, psychomotor skills, attitudes and cognitive strategies). He argued that each
required a different set of conditions to promote learning. He also described nine events
of instruction or teaching activities needed to support the attainment of the different
learning outcomes. At the heart of the early instructional design work were three aspects:
task analysis, objective specification and criterion-referenced testing. Since this early
work, Instructional Design has developed in to a significant field and numerous
instructional design models have been produced and evaluated. It is now a recognised
professional discipline, with established masters-level courses providing a foundation on
the fundamentals of the field. Instructional Design as an approach seeks to identify
learning goals and through analysis of these goals deriving instructional methods to
achieve them. This involves the development of a set of rules for employing instructional
strategies to teach different content in different settings, with the rule set linking to
conditions, instructional methods and learning outcomes. Instructional Design is also in
essence a systems approach to instruction and instructional development, i.e. thinking
systemically about instruction and seeing teachers, learners, content, etc. as components
of a larger system.

Of particular note in the field is the work of David Merrill, who through a review and
analysis of instructional design theories and methods devised a set of first principles for
design (Merrill, 2009: 43); namely that learning is promoted where learners
1. engage in a task-centred instructional strategy (Task-centred Principle)

7

2. activate relevant prior knowledge or experience (Activation Principle)
3. observe a demonstration (Demonstration Principle)
4. apply the new knowledge (Application Principle)
5. integrate their new knowledge into their everyday world (Integration Principle).

The principles were an attempt to identify the fundamental principles of good
instructional design. The central focus is on the tasks that the learners do, through
activation, demonstration, application and integration. The principles have been
extensively quoted and many of the models that have been subsequently developed
explicitly map to them. In recent years work in Instructional Design has shifted to attempt
to take a more explicit account of constructivist and socially situated approaches to
learning.

Learning Sciences
Learning Sciences is an interdisciplinary field which emerged in the mid-nineties
(Sawyer, 2006). It developed in part as a backlash against traditional notions of
education, focusing on instructionism (Papert, 193 cited in Sawyer, 2006) as the principle
paradigm, namely that learning is about acquiring knowledge which consists of a
collection of facts and procedures. Sutcliffe (2003: 242) defines instructionism as
‘learning by telling and emphasizes delivery of content; in contrast, constructionist
approaches emphasize learning by doing’. New research on learning suggested that this
narrow perspective of learning was incorrect and that there was a need to take account of
a number of additional factors: the importance of deep conceptual understanding, a focus
on learning rather than just teaching, the creation of appropriate learning environments to
foster learning, the need to build on prior learning and the importance of reflection
(Bransford, Brown and Cocking, 2000). Sawyer lists five key influences that underpin
learning sciences: constructivism, cognitive science, educational technology, socio-
cultural studies and studies of disciplinary knowledge. Learning sciences as a field is
concerned with developing a scientific understanding of learning. This includes the
design and implementation of learning innovations, and an aspiration to improve
instructional methodologies. The real value in much of the learning sciences work is the
rich, rigorous empirical studies which have been carried out, which collectively give us a
much deeper understanding of authentic, learning in real contexts.

Learning Objects and Open Educational Resources
Interest in learning objects emerged in the early nineties, with the promise of creating
digital resources which could be shared and reused. The term is contested and has been
used to describe everything from raw digital assets up to whole integrated curricula.
Wiley provides a succinct definition: Learning objects are educationally useful,
completely self-contained chunks of content (Wiley, 2005: 2). They usually consist of
three parts: educational objectives, instructional materials and an assessment component.
Littlejohn et al. (2008) identify four levels of granularity: i) digital assets – a single file,
raw media asset, ii) information objects – structured aggregation of digital assets, iii)
learning activities – tasks involving interactions with information to attend a specific
learning outcome, iv) learning design – structure sequences of information and activities.
A considerable body of research has been done into the development of tools for the

8

creation and storing of Learning Objects. However despite the vision in terms of their
potential to development an educational exchange economy, the degree of actual reuse is
relatively low.

More recently a related field has emerged, namely the Open Educational Resource (OER)
movement. Supported by organisations such at the Hewlett foundation and UNESO, the
vision behind OER is to create free educational resources that can be shared and reused.
Wiley (2009: 362) argues that OER are ‘learning objects whose intellectual property
status is clearly and intentionally labelled and licensed such that designers are free to
adapt, modify and redistributed them without the need to seek permission or pay
royalties’. He goes on to state that OER have unlocked a new set of issues for design,
namely those around how to repurpose resources for different local context, taking
account of linguistic and cultural issues. A number of centres for promoting and
researching the use of Learning Objects and OER have arisen, as well as a host of online
repositories. The Globe repository for example acts a gateway to other learning object
repositories.(http://globe-info.org/) . The Reuseable Learning Objects centre
(http://www.rlo-cetl.ac.uk/) aims to design, share and evaluate learning objects and has
produced a tool, GLO Maker for creating Learning Objects (http://www.glomaker.org/).
With the rise of the Open Educational Resources movement in recent years not
surprisingly a number of support centres and community sites have emerged. OpenLearn,
alongside its repository of OER, created Labspace and provided a range of tools for
fostering community engagement, such as a free tool for video conferencing
(Flashmeeting) and a tool for visualisation (Compendium) (http://openlearn.open.ac.uk).
The aim was to provide an environment for sharing of good practice and promoting the
reuse of OER. LeMill is a web-based community for finding, authoring and sharing open
educational practices (http://lemill.net/). Similarly, Connexions provides a space for
educators and learner to use and reuse OER
(http://www.oercommons.org/community/rice-university-connexions). Carnegie Mellon,
through its Open Learning Initiative (http://www.oercommons.org/community/rice-
university-connexions), adopts a more evidence-based approach. Finally, Carnegie
Mellon and the Open University in the UK are developing a global network of support
for researchers and users of OER, through Olnet (http://olnet.org/ ). Conole and
McAndrew provide a brief history of the OER movement (Conole and McAndrew,
2010). However despite the wealth of OER repositories that are now available, evaluation
of their use indicates that they are not being used extensively in teaching and there is
even less evidence of them being reused (Petrides and Jimes, 2006). As such some
research has begun to explore the practices around the creation, use and management of
OER, with the view that if we can better identify and understand these practices we will
be able to developed approaches to improve the uptake and reuse of the OER. This is the
central focus of the OPAL project (http://oer-quality.org/), work to date has included a
review of 60 case studies of OER initiatives and from these abstracted eight dimensions
of Open Educational Practice (http://cloudworks.ac.uk/cloudscape/view/2087).

Professional networks and support centres
Finally, it is worth mentioning that over the past ten years or so a range of professional
networks and support centres have emerged which have as part of their remit a role in

9

promoting good practice. Some have a specific focus on technologies (for example the
Association for Learning Technology), others are either focused on educational practices
or subject disciplines (for example the Higher Education Academy subject centres). In
addition it is relatively common now for institutions to have some form of specialist unit
concerned with promoting good approaches to teaching and learning practice and to
helping practitioners think about how they can use technologies more effectively. In
addition to these support centres there is also an international network of researchers and
developers interested in exploring the use of technologies in education. Many of these
have associated journals, conferences, workshops and seminar series, as well as a range
of mechanisms for connecting members virtual via mailing lists, forums and social
networking tools. These networks and support centres provide a range of mechanisms for
supporting practice – facilitation of workshops and conferences, online events and
discussions spaces, repositories of resources and case studies of good practice.

Learning design
Learning design as a research field has emerged in the last ten years or so, primarily
driven to date by researchers in Europe and Australia. Before describing the methodology
we have developed at the Open University, I will provide a brief overview of the
development of the field and some of the key features/milestones. The learning design
research work has developed in response to a perceived gap between the potential of
technologies in terms of their use to support learning and their actual use in practice
(Conole, 2004; Herrington et al., 2005; Bennett et al., 2007). Much of the learning design
research is concerned with mechanisms for articulating and sharing practice, and in
particular the ways in which designs can be represented. Lockyer et al. (2008) and
Beetham and Sharpe (2007) have produced edited collections on work in this area. A
closely related body of work to learning design is research into the development and use
of pedagogical patterns. Derived from Alexander’s work in Architecture, pedagogical
patterns is an approach to developing structured case studies of good practice (See for
example Goodyear, 2005 for an outline of the field).

Arguably the origins of the term can be traced back to work at the OUNL in the
Netherlands in terms of the development of a Learning Design specification, which
subsequently translated into the IMS LD specification (see
http://www.imsglobal.org/learningdesign/). From a review of learning theories an
Educational Modelling Language was developed (Koper and Manderveld, 2004) and
from this a Learning Design specification (see for example Koper and Oliver, 2004).
Focusing very much at the technical level, it was claimed that the LD specification was
pedagogically neutral and could be used to describe any learning interventions. The
specification was based on a theatrical metaphor, describing the roles of those involved in
the intervention, the environment in which it occurred and the tools and resources
involved. Inherent in the approach was the assumption that educational practice can be
represented in a design description, i.e. that underlying design ideas and principles can be
captured in an explicit representation. In addition the design of a course is driven by
‘pedagogical models’ that capture the teacher’s beliefs and is a set of rules that prescribe
how leaning can be achieved in a particular context. Koper and Oliver (2004: 98) define
‘learning design’ as ‘an application of a pedagogical model for a specific learning

10

objective, target group and a specific context or knowledge domain’. It specifies the
teaching-learning process. A number of tools have since been created to run IMS LD
specifications, but the work has not had a fundamental impact on changing teacher
practice, focusing more on the technical description and running of the designs.

In parallel, work in Australia embraced a broader notion of the term ‘learning design’,
which was located more at the level of practice than technical specification. The AUTC
Learning Design project aimed to capture a range of pedagogical models as learning
design case studies with the intention that these could then be used by teachers to guide
their practice and enable greater sharing and reuse of designs (Oliver, et al., 2002, AUTC,
nd, Agostinho, 2008). The work was based on a framework for describing learning
designs developed by Oliver and Harrington (Oliver, 1999, Oliver and Harrington, 2001).
This was based on three critical elements: learning tasks, learning resources and learning
supports. The intention was that thinking about and making explicit each of these
elements helped to both guide the design process and make it explicit. The approach as
used to represent a range of learning designs across different pedagogical models, such as
role play, problem-based learning, concept-based learning and collaboration. The AUTC
LD project produced detailed guidelines on each of the design case studies they captured,
representing these visually using an updated version of the design representation
developed by Oliver and Harrington, along with detailed descriptions on how the design
was produced and how it can be used. A number of studies have been conducted
exploring how the AUTC designs are actually used by teachers. Buzza et al. (2004)
focussed on the ‘Predict, Observe, Explain’ design with four teachers and two
instructional designers. Overall the participants recognised the value of the designs and
how they might be used, although the researchers concluded that widespread adoption of
the IMS Learning Design specification would not be possible until a controlled
vocabulary can be agreed upon for use in cataloguing and searching for learning designs.
Agostinho et al., (2009) explored to what extent the AUTC designs were effective
learning design descriptions, i.e. that they provide adequate information that can be easily
understood in terms of content and thus potentially reused by a teacher in their particular
educational context. Their findings were that there are three important features of an
effective learning design description: i) a clear description of the pedagogical design, ii)
some form of ‘quality’ rating, and iii) guidance/advice on how the design could be
reused.

In the UK the Joint Information Systems Committee (JISC) funded a series of projects
under the ‘Design for Learning programme’ (See Beetham, 2008 for a review of the
programme and the lessons learnt). The term ‘Design for Learning’ was used rather than
learning design to indicate a broader scope and a more holistic approach. Design for
learning was defined as ‘a set of practices carried out by learning professionals… defined
as designing, planning and orchestrating learning activities which involve the use of
technology, as part of a learning session or programme’ (Beetham, 2008: 3). The
programme included a review of e-learning pedagogical models, which classified
learning theories into three main types: associative, constructive and situative (Mayes and
DeFreitas, 2005). The Mod4L project explored what different types of design
presentations were being used by practitioners and concluded that de-contextualised

11

designs or patterns could not in practice form the basis of a generic design typology, in
which a finite number of educationally meaningful intentions could be discerned
(Falconer, et al. 2007). The programme also supported the development of two
pedagogical planner tools, Phoebe (Masterman, 2008) and the London Pedagogical
Planner. The programme divided the design lifecycle into four parts: design, instantiation,
realisation and review. The granularity of the designs ranged from the design of learning
objects or short learning activities up to broader sessions or whole courses/curricula.
Some of the key lessons from the programme included the following. Design practices
are varied, depending on individuals, subject differences and local cultures. Design tools
are rarely perceived as pedagogically neutral and most are not considered flexible enough
to match real practice. There were mixed views on what were the most appropriate ways
of representing and sharing designs – some wanted rich, narrative representations, others
wanted bite-sized representations that could be easily reused.

Origins of the OU Learning Design Initiative
The OU Learning Design Initiative emerged from previous work on the development of a
learning design toolkit, DialogPlus (Fill and Conole, 2008). Like the Phoebe and the LPP
tools, DialogPlus was intended to act as a step-by-step guide to enable teachers to create
learning designs. The tool was based on an underlying taxonomy which defined the
components of a learning activity (Conole, 2008), which was derived through a series of
interviews with teachers about their design practices. However, evaluation of the actual
use of such design planner tools indicated that they did not match actual design practice
closely enough. Their relatively linear and prescriptive structure did not match the
creative, iterative and messy nature of actual teacher design practice.

The OU Learning Design Initiative was initiated in 2007, supported through strategic
funding from the OU. The intention was to derive a more practice-focussed approach to
learning design, identified from empirical evidence of actual practice. This included
gathering 43 case studies of the ways in which the then new Learning Management
System (LMS) (Moodle) was being used (Wilson, 2007) and a series of interviews with
teachers to articulate their actual teaching practice (Clark and Cross, 2010). The key
focus of the teacher interviews was to better understand existing practice. The authors
note in their introduction that ‘Even experienced academics who have participated in a
range of course production tasks find it difficult to articulate how they go about
developing a “learning design” that will be transformed into effective learning materials’
(Clark and Cross, 2010). The interviews focussed on five main questions: i) process: how
do teachers go about designing a course?, ii) support: how do they generate ideas?, iii)
representation: how do they represent their designs?, iv) barriers: what barriers do they
encounter?, v) evaluation: how do they evaluate the effectiveness of the design?

A range of approaches to design were evident, including gathering of resources,
brainstorming, listing concepts and skills, creating week-by-week plans, etc. On the
whole these were paper-based and primarily text-based. There was little evidence of use
of alternative, more visual representations or visual software tools. Interviewees wanted
help with understanding how to integrate ICT-based activities into courses. Face-to-face
workshops and meetings were favoured over online support as they were felt to be the

12

most effective way of thinking about, and absorbing, new ideas and ways of working.
Case studies interestingly were considered to be too demanding in time and effort,
interviewees wanted just-in-time support to specific queries. The most effective form of
support was considered to be sharing of experience with peers. A variety of
representations were mentioned from simple textual representations or lists through to
more complex and connected mindmaps. The interviewees listed a variety of purposes for
the representations, including communicating personal vision, capturing or sharing ideas,
comparing with others, viewing the course at different levels and mapping content to
learning outcomes. Barriers included concerns about a lack of experience of creating
online activities and a lack of successful examples and an OU-specific issue in terms of
the difficulty of melding together the innovative (and often idiosyncratic) ideas of course
creators with the needs of a production system delivering the OU’s size and range of
learning materials and services. A range of mechanisms were cited in terms of evaluation
approaches. These included feedback from students and tutors, comments from critical
readers, peer course team critiques and comments from external examiners.
This empirical work provided a sound basis for the development of our approach. Our
initial focus centered on the following questions:

• How can we gather and represent practice (and in particular innovative practice)
(capture and represent practice)?
• How can we provide ‘scaffolds’ or support for staff in creating learning activities that
draws on good practice, making effective use of tools and pedagogies (support
learning design)? (Conole, 2009).

We have identified six reasons why adopting a learning design approach might be
beneficial:
1. It can act as a means of eliciting designs from academics in a format that can be
tested and reviewed with developers, i.e. a common vocabulary and understanding of
learning activities.
2. It provides a means by which designs can be reused, as opposed to just sharing
content.
3. It can guide individuals through the process of creating learning interventions.
4. It creates an audit trail of academic design decisions.
5. It can highlight policy implications for staff development, resource allocation,
quality, etc.
6. It aids learners in complex activities by guiding them through the activity sequence.

These map closely with the benefits of adopting a design-based approach outlined by
Gibbons and Brewer (2005). They argue that the benefits include: improving the rate of
progress (in the creation of designs), influencing the designer conceptions through
making the design process explicit, helping to improve design processes, improvements
in design and development tools, and bringing design and production closed together.
Fundamentally, I would agree with their assertion that it opens up new ways of thinking
about designs and designing.

13

We were interested in a number of research questions in particular. Can we develop a
range of tools and support mechanisms to help teachers design learning activities more
effectively? Can we agree a shared language/vocabulary for learning design, which is
consistent and rigorous, but not too time consuming to use? How can we provide support
and guidance on the creation of learning interventions? What is the right balance of
providing detailed, real, case studies, which specify the detail of the design, compared
with more abstract design representations that simply highlight the main features of the
design? How can we develop a sustainable, community of reflective practitioners who
share and discuss their learning and teaching ideas and designs?

A design-based research methodology
We are adopting a design-based research (DBR) approach; starting with a stated problem
we were trying to address, a proposed solution and then an iterative cycle of
developments and evaluation. Design-based research has emerged in recent years as an
approach for studying learning in context through systematic design and study of
instructional strategies and tools (Brown, 1992; Collins, 1992 cited in Design-Based
Research Collective, 2003). Wang and Hannafin (2005:5-6) define it as ‘a systematic, but
flexible methodology aimed to improve educational practice through iterative analysis
design, development and implementation, based on collaboration between researchers
and practitioners in real-world settings, and leading to contextually-sensitive design
principles and theories’. Reigeluth and An (2009:378-379) articulate the following set of
characteristics of DBR:
1. It is driven by theory and prior research. In our work, as described above we are
building on the substantive body of prior research on instructional design, learning
sciences, learning objects/Open Educational Resources and more recently learning
design. The approach we adopt is socio-cultural in nature, with a focus on the design
and use of a range of mediating artefacts involved in teaching-learning processes (See
Conole, 2008 for a more detail account of this).
2. It is pragmatic. Our aim is to develop tools and resources which are useful in actual
practice, by practitioners to address real educational challenges. Our intention is to be
theory-driven, but pragmatic, recognising the complex, messy and often craft-based
nature of teaching practice.
3. It is collaborative. We see working in close connection with end users as a vital part
of our approach. Our initial interviews with teachers confirmed our view that teaching
practice is complex and situated. Changing practice will only occur through close
working with and understanding of practitioners’ needs.
4. It is contextual. Our vision is to change actual practice, to achieve this it is important
that the development activities occur in real, authentic contexts.
5. It is integrative. Wang and Hannifin (2005: 10) state that ‘DBR uses a variety of
research methods that vary as new needs and issues emerge and the focus of the
research evolves’. We have adopted a mixed-method approach to evaluating our
developments, matching the methods we use to the specific sub-research questions
and the context that we are focusing on.
6. It is iterative. Our approach consists of an interactive cycle of identification of
problems to be addressed, suggestion of proposed solutions, development, use,
evaluation and refinement.

14

7. It is adaptive and flexible. Because our work is closely tied to actual practice, we
need to ensure that the approach we are adopting is agile in nature, so that we can
adapt based on evidence from changing practice.
8. It seeks generalisation. In addition to the practical, pragmatic nature of our work, we
are also attempting to develop a coherent underlying learning design framework of
concepts and approaches.

The main components of the OU Learning Design methodology
In essence we are focusing on three aspects of design: i) the development of a range of
conceptual tools to guide the design process and provide a means of representing (and
hence sharing) designs, ii) the development of visual tools to render some of the
conceptual tools and enable practitioners to manipulate their designs and share them
digitally with others, iii) the development of collaborative tools – both in terms of
structures for face-to-face events such as workshops and use of digital tools to foster
communication and sharing. For each aspect we have now developed a set of tools,
resources and activities and over the last two years we have been trialling these in a range
of settings, both with the OU and also externally with a number of partner institutions and
through demonstrations and workshops at conferences. It would be impossible in the
scope of this paper to describe all the tools, resources and activities in detail; hence a
selection will be described to give an overall view of the work to date. An evolving
online learning design toolkit is being developed which includes our current set of tools,
resources and activities (http://cloudworks.ac.uk/cloudscape/view/1882). In addition a
learning activity taxonomy has been developed (Conole, 2008) and more recently a
Learning Design taxonomy which provides a map of the domain, the key concepts and
where individual tools, resources and activities fit (Conole, 2010a).

OULDI aims to bridge the gap between the potential and actual use of technologies
outlined in the introduction, through the development of a set of tools, methods and
approaches to learning design, which enables teachers to making better use of
technologies that are pedagogically informed. Conole (2009) provides a reflection on the
origins of OULDI and the benefits of adopting this approach. The aim is to provide a
design-based approach to the creation and support of learning and teaching, and to
encourage a shift away from the traditional implicit, belief-based approaches to design-
based, explicit approaches. This will encourage sharing and reflection. The tools and
resources are designed to help guide decision-making. The work is underpinned by an
ongoing programme of empirical evidence which aims to gain a better understanding of
the design process and associated barriers and enablers, as well as an ongoing evaluation
of the tools, methods and approaches we are developing and using and in particular to
what extent they are effective. There are three main aspects to the work we are doing:
1. Conceptualisation – the development of a range of conceptual tools to help guide the
design decision-making process and to provide a shared language to enable
comparisons to be made between different designs.

2. Representation – identification of different types of design representation and use of a
range of tools to help visualise and represent designs.

15

3. Collaboration – mechanisms to encourage the sharing and discussing of learning and
teaching ideas.
In terms of conceptualisation we have developed a range of tools to help guide the design
process. One of the key aspirations is to enable teachers to shift away from a focus on
content and subject matter to thinking more holistically and laterally about the design
process. The conceptual tools are also designed to promote thinking on adopting different
pedagogical approaches and using technologies effectively. To illustrate this five
conceptual tools are described here:

• The Course Map View

• The Course Dimensions view

• The Pedagogy Profile

• The Learning Outcomes view

• The Task Swimlane view
In addition two data-driven views have been produced, one giving an indication of the
cost effectiveness of the course, derived from finance data about the course and one
giving an indication of the course performance, derived from student and tutor survey
data and information on course retention and progression.

The Course Map view provides an overview of a course at a glance and enables teachers
to think about the design of the course from four meta aspects; namely ‘Guidance and
Support’, ‘Content and Activities’, ‘Communication and Collaboration’ and ‘Reflection
and Demonstration’.

16

Figure 1: The Course Map view

The second is a refinement of the course map. The Course Dimensions view gives a
better indication of the nature of the course and how it is supported. For example, it
indicates to what extent the course is online, how much it is tutor-guided and the amount
of collaborative or activity-based activities are included.

Figure 2: The Course Dimensions view

The third view, the Pedagogy Profile, looks at the balance of the types of student
activities (See Conole, 2008 for the full learning activity taxonomy this is based on).
These are:

17

• Assimilative (attending and understanding content)

• Information handling (gathering and classifying resources or manipulating

data)
• Adaptive (use of modelling or simulation software)

• Communicative (dialogic activities, e.g. pair dialogues or group-based

discussions)
• Productive (construction of an artefact such as a written essay, new chemical

compound or a sculpture)
• Experiential (practising skills in a particular context or undertaking an

investigation).
• In addition the tool looks at the spread of assessment across the course

Figure 3: The Pedagogy Profile

The Learning Outcomes view enables the teacher to judge to what extent there is
constructive alignment (Biggs, 1999) with the course, i.e. it looks at how the learning
outcomes map to the student activities and to the assessment tasks.

18

Figure 4: The Learning Outcomes view

Finally, the Task Swimlane view enables a teacher to map out the details on an
individual learning activity; indicating what the student is doing when and what tools and
resources they are using.

Figure 5: The Task Swimlane view

To demonstrate the use of these views on real courses, the following four figures are for
the KE312 course ‘Working together for children’ (Level 3, 60 points). Two of the

19

conceptual views (the course map and pedagogy profile) are shown, along with the two
data-driven views on cost effectiveness and course performance. We think the real power
in these views will be through modeling across the views and looking at the impact
different design decisions have on cost effectiveness and course performance. As part of
a current strategic initiative (the Course Business Models project), we intend in the next
year to build up a repository of views across the Open University. We have gathered
around twenty to date, which we shared with staff from across the University at a
workshop in May 2010. Feedback overall on the views was very positive and there was a
general consensus that embedding these views in our institutional systems and processes
has the potential to make design decisions more effective and will encourage the
application of more innovative approaches. This builds on a detailed mapping of our
curriculum systems and processes (Mundin, 2009), which concluded that the focus was
primarily administrative in nature and there was little focus on pedagogy and design. The
intention is to embed the design views described here at key trigger points in the
curriculum process, so that a shared design language can be developed across the
different stakeholders involved in learning and teaching (course teams, tutors, learners,
developers and support staff). A strong message from the participants at the workshop
was that the introduction of any new tools and techniques like this, must in a way replace/
integrate with existing practices, rather than introduce a new layer of ‘bureaucracy’.

Figure 6: The Course Map for KE312, completed as an excel spreadsheet

20

Figure 7: Part of the Pedagogy Profile for KE312, completed as an excel spreadsheet

21

Figure 8: The Cost Effectiveness view for KE312

Figure 9: The Course Performance view for KE312

22

As part of our work on representing pedagogy we have developed a visualisation tool
(CompendiumLD) for designing learning activities (Conole et al. 2008). CompendiumLD
is a type of mindmapping or concept mapping tool that can be used to design a learning
activity. In addition we have been using an Excel spreadsheet as a means of capturing
and representing these conceptual views. However the power of the conceptual tools is
that they work equally well as discussion points or as simple pen and paper exercises. In
essence they are Mediating Artefacts to guide thinking and foster dialogue.

We have also developed a social networking site (http://cloudworks.ac.uk) for sharing
and discussing learning and teaching ideas. Cloudworks is a powerful new form of social
networking tool: particularly suited for sharing, debating and co-creation of idea (Conole
and Culver, 2010). The site combines a mix of Web 2.0 functionality and enables new
forms of communication and collaboration and cross-boundary interactions between
different communities of users. The core object in the site is a ‘cloud’, which can be
aggregated into community spaces called ‘cloudscapes’. In the Cloudworks site a cloud
can be anything to do with learning and teaching (a description of a learning and teaching
practice, an outline about a particular tool or resource, a discussion point).

Figure 10: The Cloudworks homepage

Clouds combine a number of features of other Web 2.0 technologies. Firstly, they are like
collective blogs, i.e. additional material can be added to the cloud, which appears as
series of sequential entries under the first contribution. Secondly, they are like discussion
forums, there is a column under the main cloud where users can post comments. Thirdly,
they are like social bookmarking sites, i.e. links and academic references can be added.
Finally they have a range of other functionalities common on Web 2.0 sites, such as
‘tagging’, ‘favouriting’, RSS feeds, the concept of following, and activity streams.
Collectively these features provide a range of routes through the site and enable users to
collectively improve clouds in a number of ways. The homepage of the site, in addition to

23

providing standard navigation routes (such as browsing of clouds, cloudscapes and
people and searching), lists currently active Clouds and five featured Cloudscapes. All
recent activities on the site (newly created clouds and cloudscapes, comments, additions,
etc) are listing in a site Cloudstream. Although the first use of the tool has been to support
educators, it could be used to support any communities wanting a space to share and
discuss issues and ideas. The site was launched in July 2009 and now has had more than
60,000 unique hits from 165 countries. One of the most power features of the site is that
it facilitates boundary crossings between communities, enabling different stakeholders
(policy makers, researchers, teachers, learners, etc.) to interact in unanticipated ways.

One of the key distinctive features of Cloudworks and its advantage over other social
networking sites is the way it enables and facilitates not only connections within
communities but between them. It enables crossing of boundaries between communities.
There is something distinctive about the general layout/functionality of clouds – which in
essence are a kind of mix of collective blog, discussion forum, social bookmarking,
addition of links and embeds. This mixed functionality seems to be promoting new and
interesting forms of social interaction. It has a genuine global reach with different kinds
of stakeholders. For example in the current site researchers are interacting with teachers,
policy makers, learners, etc. A core principle of the site is that it is totally open, anyone
can see anything in the site. This means it has genuine global reach and ensures that it
harnesses the best of web 2.0 practices and affordances. Serendipity has been built into
the site in a variety of ways, this enables individuals to cross community boundaries and
make unexpected connections. The site offers powerful mechanisms for supporting social
networks in a range of ways and at different levels.

The site already has a rich set of web 2.0 functionality; such as collective improvement of
clouds via additional content, tagging, links and academic references, embedding of
different types of content (such as blogs, video clips, voxpops etc), sequential discussion
space, activity streams called Cloudstreams (for the whole site, individual cloudscapes,
and individual users), functionality to ‘follow’ people – their activities on the site then
appear in a personalised Cloudstream, voting and recommender tools, a personalised
bookmarking feature ‘My Favourites’, and automatic embedding of Twitter streams on
cloudscapes. There are multiple routes through and ways of connecting, so that
individuals can personalise the use of the site to their own preferred ways of working. We
now have a dynamic and self-sustaining community, with the emergence of individual
champions and local colonisation of sections of the site. We have a lot of experience now
as to how to foster and build this form of self-sustainability. One of the rich features of
Cloudworks is the way in which there is a mixture of different types of activities
occurring in the same space – events, reading groups, flash debates, online consultations,
online research reviews.

An open source version of the site will be available by the end of August 2010, which
means it can be customised and the benefits of being part of the wider Cloudworks
development community. We have a proof of concept working in terms of embedding
Google gadgets, two have been developed so far: People recommender and a Cloud

24

recommender. An Applications Profile Interface is currently being developed, which will
mean that data can be passed between the Cloudworks site and other social network sites.

Figure 11: The approach to development and evaluation of Cloudworks

The site has been developed through a process of socio-technical co-evolution. In essence
two parallel strands of intervention are ongoing – one technical and one social. Alongside
this we have put in place a reach virtual ethnographic approach to evaluation of the use of
the site and identification of emerging user behaviours.
Use and development of the site is being monitored in a number of ways (Conole and
Culver, 2010). Data collection has included web stats and Google analytics, analysis of
site activities and discussions, collation of references to Cloudworks elsewhere (such as
in the blogosphere and Twitter), and use and evaluation of the site at numerous
workshops and conferences. A Cloudworks questionnaire is also available online. This
multi-faceted evaluation strategy has gathered data that has then been used to inform the
next design phase, thus ensuring an alignment between technical developments and user
needs. The data, and particularly the user feedback, has given us a rich understanding of
how the site has evolved and how it is being used. At key points we have commissioned
an expert review of the site and have to date undergone three site redesigns,
commissioning an expert external designer.

A range of standard statistics is gathered routinely, along with an administrative
Cloudstream, which in addition to listing activities on the site chronologically (in the way
that the main site Cloudstream does), it also documents when new users register with the
site (the site is open, but users need to register if they wish to post anything or create
Clouds or Cloudscapes) and when users choose to ‘follow’ others. We will also be
capturing on a 6 monthly basis: the number of users who have posted clouds, the number
of users who have posted comments, and the number of unique users posting a cloud or
comment in last 60 days. To measure sustainability and longevity of contribution, we are
also capturing: the number of registered users who have posted a cloud or comment at
least one month after registration (this way we don’t count the initial use of the site for

25

say a conference or workshop) and the number of registered users who have posted a
cloud or comment at least a year after registration.

Table 1: Statistics

Aspect Everyone Team Non-team
Cloudscapes 289 100 189
Clouds 2408 1214 1194
Comments 3414 1012 2402
Links 3268 1678 1590

The site is also linked to Google analytics, which shows the growth of the site since its
launch in July 2009. As is evident with other Web 2.0 sites, the number of active
contributors to the site (currently 2376 registered) is less than the number of unique
visitors (63, 118 visits from 165 countries). The top five countries are UK, United States,
Canada, Australia and Italy).

Figure 12: Google Analytics

We have also undertaken a number of qualitative studies of the use of the site; including
explorations around how the site is being used by a particular community or theme and
through a series of interviews with users. Alevizou et al. (2010) describe the range of
theoretical frameworks that are being used to guide the design and analysis of the site.
Galley has developed a Community of Indicators framework as a mechanism of analysis
interactions on the site and has used this as the basis for undertaking a series of case
study evaluations of the site (Galley et al, 2010).

26

Conclusion and future research plans
The paper has introduced a new methodology for helping practitioners to make more
design-based decisions about the creation and support of learning interventions. It has
contextualized this in related research fields. Examples of some of the tools, resources
and activities that have been produced as part of the OU Learning Design Initiative have
been described. The work is part of a broader programme of activities at the OU,
Learning in an Open World. The programme is exploring the question: “What is likely to
be the impact of an increasingly ‘open’ technologically mediated learning environment
on learning and teaching in the future? In a world where content and expertise is
increasingly free and where services are shifting to the ‘cloud’, what are the implications
for education? We are taking a particular position on the notion of “openness”;
considering it from a broad perspective covering four major phases of the academic
lifecycle: ‘open design’, ‘open delivery’, ‘open evaluation’ and ‘open research’ (Conole,
2010b). Findings from the research to date are promising, indicating that this is a fruitful
area for development. However it is clear that there are also a number of challenges
associated with this work. More needs to be done to consolidate the theoretical basis for
the work and to identify which methodological approaches are going to be most fruitful.

Acknowledgements
A range of people have been involved in aspects of this work. In particular I would like to
thank members of the OULDI team (Andrew Brasher, Simon Cross, Paul Clark, Juliette
Culver, Rebecca Galley, and Paul Mundin), members of the Course Business Models
team (Mick Jones, Paul Mundin, Andrew Russell, James Fleck, Tony Walton and Peter
Wilson), Barbara Poniatowska and Kevin Mayles from the ‘E-learning data’ project and
members of the Olnet team (Giota Alevizou and Patrick McAndrew). I would also like to
thank the OU for supporting some of this work through strategic funding, the JISC for
funding through its Curriculum Design programme, The William and Hewlett Foundation
for supporting Olnet and finally EU-funded work for a number of related projects.

References
Adapting Learning Design Specifications For Shared Instructional Knowledge, Canadian
Journal of Learning and Technology, Volume 30(3).
Agostinho, S. (2008), Learning Design representations to document, model and share
teaching practice, in L. Lockyer, S. Bennett, S. Agostinho and B. Harper, (Eds),
Handbook of Research on Learning Design and Learning Objects: Issues,
Applications and Technologies, 1-19, Information Science Reference.
Agostinho, S., Bennett, S., Lockyer, L., Kosta, L., Jones, J. and Harper, B. (2009), An
examination of learning design descriptions in an existing learning design repository,
Proceedsing of the ASCILITE 2009 conference, available online at
http://www.ascilite.org.au/conferences/auckland09/procs/agostinho.pdf, [1705/10]
Alevizou, P., Conole, G., Culver, J. and Galley, R. (2010), Ritual performances and
collective intelligence: theoretical frameworks for analysing emerging activity patterns
in Cloudworks, paper in a symposium - Conole, G. and Retalis, S. (2010), Symposium
organisers - Current challenges in learning design and pedagogical patterns research,
Networked Learning Conference, Aalborg, Denmark, 3rd – 4th May 2010.

27

Anderson, L.W., and Krathwohl, D.R. (eds.) (2001). A Taxonomy for Learning,
Teaching, and Assessing: A Revision of Bloom's Taxonomy of Educational
Objectives. New York: Longman
AUTC (n.d.). The AUTC Learning Design project website,
http://www.learningdesigns.uow.edu.au/, [17/05/10]
Beetham, H. (2008), Review: Design for Learning programme phase 2, JISC
commissioned report, available online at
http://www.jisc.ac.uk/media/documents/programmes/elearningpedagogy/helenbeetha
mreviewphase2.doc, last accessed [17/06/10]
Beetham, H. and Sharpe, R. (Eds) (2007), Rethinking pedagogy for a digital age,
RoutledgeFalmer: London.
Bennett, S. Agostinho, S., Lockyer, L., Kosta, L., Jones, J., Koper, R. and Harper, B.
(2007), Learning designs: bridging the gap between theory and practice, Proceedings
of the ASCILITE conference 2007, available online
http://www.ascilite.org.au/conferences/singapore07/procs/bennett.pdf, last accessed
[17/06/10].
Biggs, J. (1999) Teaching for quality learning at university. Buckingham: Society for
Research in Higher Education. Milton Keynes: Open University Press
Bloom, B.S. (Ed.) (1956) Taxonomy of Educational Objectives, the classification of
educational goals – Handbook I: Cognitive Domain New York: McKay.
Bransford, J. D., Brown, A. L., & Cocking, R. R. (2000). How People Learn: Brain,
Mind, Experience, and School: Expanded Edition. Washington, D. C.: National
Academy Press.
Buzza, D.C., Bean, D., Harrigan, K. and Carey, T. (2004), Learning Design Repositories:
Borgman, C., Abelson, H., Dirks, L., Johnson, R., Koedinger, K., Linn, M., Lynch, C.,
Oblinger, D., Pea, R., Salen, K., Smith, M & Szalay, A. (2008), Fostering learning in
the networked world: The cyberlearning opportunity and challenge. Report of the NSF
Task Force on Cyberlearning.
Castells, Manuel (2000), The Rise of the Network Society, The Information Age:
Economy, Society and Culture Vol. I., Second Edition, Cambridge, MA; Oxford, UK:
Blackwell.
Clark, P. and Cross, S. (2010), Report on teacher interviews, Appendix B, in S. Cross
(Ed.), The Learning Design Initiative Institutional Project Phase Two Report:
‘Embedding learning design and establishing a reversioning culture’, Open
University: Milton Keynes.
Cole, M., Engeström, Y. & Vasquez, O.A. (1997) Mind, culture, and activity: Seminal
papers from the Laboratory of Comparative Human Cognition, Cambridge Univ Pr.
Conole and Culver (2009), Cloudworks: social networking for learning design,
Australian Journal of Educational Technology, 25(5), pp. 763–782,
http://www.ascilite.org.au/ajet/ajet25/conole.html.
Conole, G. (2005), 'E-Learning: The Hype and the Reality', Journal of Interactive
Multimedia Education, http://www-jime.open.ac.uk/2004/12/conole-2004-12-t.html,
2004 (12)
Conole, G. (2008) ‘Capturing practice: the role of mediating artefacts in learning design’,
in Handbook of Research on Learning Design and Learning Objects: Issues,

28

Applications and Technologies, in L. Lockyer, S. Bennett, S. Agostinho, and B
Harper (Eds), 187-207, Hersey PA: IGI Global.
Conole, G. (2009), ‘Capturing and representing practice’, in A. Tait, M. Vidal, U.
Bernath and A. Szucs (eds), Distance and E-learning in Transition: Learning
Innovation, Technology and Social Challenges, John Wiley and Sons: London.
Conole, G. (2010a), A taxonomy for learning design, blog post on
www.e4innovation.com, 7th May 2010, http://e4innovation.com/?p=390 [17/06/10].
Conole, G. (2010b), Learning in an open world, ESRC seminar series, Southampton
University, 3rd June 2010.
Conole, G. and Culver, J. (2010) 'The design of Cloudworks: applying social networking
practice to foster the exchange of learning and teaching ideas and designs' Computers
and Education, 54(3): 679 - 692.
Conole, G., Brasher, A., Cross, S., Weller, M., Clark, P. and White, J. (2008), Visualising
learning design to foster and support good practice and creativity, Educational Media
International, Volume 54, Issue 3, 177-194.
Conole, G. and McAndrew, P. (2010), A new approach to supporting the design and use
of OER: Harnessing the power of web 2.0, M. Edner and M. Schiefner (eds), Looking
toward the future of technology enhanced education: ubiquitous learning and the
digital nature.
Conole, G. and Alevizou, P. (2010), A review of the use of Web 2.0 tools in Higher
Education, The Open University: Milton Keynes.
Derntl, M., Parish, P. and Botturi, Luca, (2008), Beauty and Precision in Instructional
Design, Proceedings of the Edmedia conference 2008.
Design-Based Research Collective. (2003). Design-based research: An emerging
paradigm for educational inquiry. Educational Researcher, 32(1), 5-8.
Donald, C. and Blake, A. (2009), Reviewing learning designs with HEART: A learning
design support strategy, Proceedings of the ASCILITE 2009 conference, available
online at http://www.ascilite.org.au/conferences/auckland09/procs/donald-interactive-
session.pdf, [17/06/10]
Falconer, I., Beetham, H., Oliver, R., Lockyer, L. and Littlejohn, A. (2007), Mod4L Final
Report: Representing Learning Designs. Available fromhttp://mod4l.com/tiki-
download_file.php?fileId=7
Fill, K., Bailey, C. and Conole, G. (2008), A toolkit to guide the design of effective
learning activities, in 'E-Learning for Geographers', P. Rees, L Mackay, H. Durham
and D. Martin (eds). IGI Global: Hershey, PA.
Gagné, R. M. (1965). "The conditions of learning." New York: Holt, Rinehart and
Winston.
Galley, R., Conole, G., Dalziel, J. and Ghiglione, E.. (2010), Cloudworks as a
‘pedagogical wrapper’ for LAMS sequences: supporting the sharing of ideas across
professional boundaries and facilitating collaborative design, evaluation and critical
reflection LAMS European Conference, Oxford, 15-16th July 2010.
Giddens, Anthony (1999) Runaway World: How Globalization is Reshaping Our Lives.
London : Profile.
Gibbons, A.S. and Brewer, E.K. (2005), Elementary principles of design languages and
design notation systems for instructional design, 111 – 129, in J.M. Spector, C.

29

Ohrazda, A. Van Schaack and D.A. Wiley (Eds), Innovations in instructional
technology, Lawrence Erlbaum Associates: Mahwah, NJ.
Goodyear, P. (2005), ‘Educational design and networked learning: Patterns, pattern
languages and design practice’, Australian Journal of Educational Technology, 21 (1),
82-101, available online at http://www.ascilite.org.au/ajet/ajet21/goodyear.html
[27/1/07]
Herrington, J., Reeves, T. and Oliver, R. (2005), Online learning as information delivery:
myopia, Journal of Interactive Learning Research, 16(4), 353-367.
http://www.aect.org/pdf/etr&d/4902/4902-04.pdf
InstructionalDesign (n.d.), The instructional design website, available online at
http://www.instructionaldesign.org/, [17/06/10]
Jenkins, H., Clinton, K., Purushotma, R., Robison, A.J., & Weigel, M. (2006).
Confronting the Challenges of Participatory Culture: Media Education for the 21st
Century. MacArthur Foundation, [last accessed 19/05/10],
http://digitallearning.macfound.org/atf/cf/{7E45C7E0-A3E0-4B89-AC9C-
E807E1B0AE4E}/JENKINS_WHITE_PAPER.PDF .
Koper, R. and Manderveld, J. (2004), Educational modelling language: modelling
reusable, interoperable, rich and personalised units of learning, British Journal of
Educational Technology, 35(5), 537-551
Koper, R. and Olivier, B. (2004), Representing the Learning Design of units of learning,
Education, Technology and Society, 7(3), 97 -111.
Littlejohn, A., Falconer, I. and McGill, L. (2008), Characterising effective eLearning
resources, Computers and Education, 50(3), 757-771.
Masterman, E. (2008). Activity Theory and the Design of Pedagogic Planning Tools. In
L. Lockyer, S. Bennett, S. Agostinho, & B. Harper (Eds.), Handbook of Research on
Learning Design and Learning Objects: Issues, Applications and Technologies (pp.
209-227). Hershey, PA: Information Science Reference.
Mayes and De Freitas (2004), Review of e-learning theories, models and frameworks,
JISC commissioned report, available online at
http://www.jisc.ac.uk/uploaded_documents/Stage%202%20Learning%20Models
%20(Version%201).pdf, [17/05/10]
Merrill, M. D. (2009). First Principles of instruction, 41 -56. in C. M. Reigeluth and A.
Carr (Eds.). Instructional Design Theories and Models III. Lawrence Erlbaum
Associates Publishers.
Moallem, M. (2001), Applying Constructivist and Objectivist Learning Theories in the
Design of A Web-Based Course: Implications for Practice, Education, Technology
and Society, 4 (3).
Mundin, P., (2009), Overview of the OU Curriculum Design process, Appendix A, in S.
Cross (Ed.), The Learning Design Initiative Institutional Project Phase Two Report:
‘Embedding learning design and establishing a reversioning culture’, Open University:
Milton Keynes.
Oliver, R. (1999), Exploring strategies for on-line teaching and learning, Distance
Education, 20(2), 240-254.
Oliver, R. and Harrington, J. (2001), Teaching and learning online: a beginner’s guide to
e-learning and e-teaching in higher education. Edith Cowan University: Western
Australia.

30

Oliver, R., Harper, B., Hedberg, J., Wills, S. and Agostinho, S. (2002), Formalising the
description of learning designs, Proceedings of the HERSA conference 2002, 496 –
504.
Papert, S. (1993), Mindstorms (2nd Ed.), New York: Basic Books.
Petrides, L. and Jimes, C. (2006), Open Educational Resources: towards a new
educational paradigm, iJournal, 14, October 2006, available online at
http://www.ijournal.us/issue_14/ij_14_04_articleframe_Petrides_Jimes.html.
Reigeluth, C.M. and Carr-Chellman, A.A. (2009), Instructional-design theories and
models – building a common knowledge base, Volume III, RoutledgeFalmer: Oxford.
Reigeluth, C.M. (2009), Instructional theory for education, 387-399, in C.M. Reigeluth
and A.A. Carr-Chellman (Eds), Instructional-design theories and models – building a
common knowledge base, Volume III, RoutledgeFalmer: Oxford.
Reigeluth, C.M. and An, Y. (2009), Theory building, 3865-386, in C.M. Reigeluth and
A.A. Carr-Chellman (Eds), Instructional-design theories and models – building a
common knowledge base, Volume III, RoutledgeFalmer: Oxford.
Reiser, R.A. (2001), The history of instructional design and technology: part 1 a history
of instructional media, ETR&D, 49(1), 53-64.
Reiser, R.A. (2001), The history of instructional design and technology: part 2 a history
of instructional design, ETR&D, 49(1), 53-64.
San Diego, J.P., Laurillard, D., Boyle, T., Bradley, C., Ljubojevic, D., Neumann, T. and
Pearce, D. (2008), Towards a user-oriented analytical approach to learning design,
ALT-J, 16(1), 15-29.
Sawyer, R.K. (2006),The Cambridge Handbook of Learning Sciences,
Sharpe, R. and Beetham, H. (Eds) (forthcoming, Rethinking learning for a digital age,
RoutledgeFalmer: London.
Sutcliffe, A. (2003), Multimedia and virtual reality – designing multisensory user
interfaces, Mahwah, NJ: Lawrence Erlbaum Associates.
Van Merrienboer, J.J.G. ad Boot, E. (2005), A holisitic pedagogical view of learning
objects: future directions for reuse,43 – 64, in J.M. Spector, C. Ohrazda, A. Van
Schaack and D.A. Wiley (Eds), Innovations in instructional technology, Lawrence
Erlbaum Associates: Mahwah, NJ.
Wang, F. and Hannafin, M. (2005), Design-based research and technology-enhanced
learning environments, Educational Technology Research and Development, 53(4),
5-23.
Wiley, D. (2005), Learning objects in public and Higher Education, 1 – 9, in J.M.
Spector, C. Ohrazda, A. Van Schaack and D.A. Wiley (Eds), Innovations in
instructional technology, Lawrence Erlbaum Associates: Mahwah, NJ.
Wilson, P. (2007), 'Progress report on capturing eLearning case studies', Internal report,
The Open University: Milton Keynes.
Winograd, T. (1996), Bringing design to software, AddisonWiley: New York.

31

Conole connected june_2010

More Related Content

What's hot (20)

Similar to Conole connected june_2010 (20)

More from grainne (20)

Recently uploaded (20)

Conole connected june_2010