Course Description.pdf
- 1. ١ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair Dr. Abdel-Alim Hashem El-Sayed Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering – Cairo University aelsayed@mail.eng.cu.edu.eg ahshem2000@yahoo.com Course Description Oil and Gas Pipeline Design, Maintenance and Repair
- 2. ٢ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair BASIC INFORMATION Title: Oil and Gas Pipeline Design, Maintenance and Repair Code: PE 607 Credit Hrs. Lectures: 2 Tutorial: 0 Practical: 0 Total: 2
- 3. ٣ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair PROFISSIONAL INFORMATION 1. OVERALL AIMS OF COURSE 2. INTENDED LEARNING OUTCOMES (ILOs) 3. CONTENTS 4. TEACHING AND LEARNING METHODS 5. STUDENT ASSESSMENT METHODS 6. LIST OF REFERENCES 7. COURSE COORDINATOR
- 4. ٤ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 1. COURSE OBJECTIVES • Expand the scope of the petroleum engineer to include the importance pipeline materials and components. • Include fluid flow through pipes, pipeline materials and components, the loads the stresses applied on the pipeline, the design procedures of oil and gas pipeline. • Pipeline locations and the hazards associated with each type, the pigging technique to clean the pipeline, leak detection, pipeline repair procedures • Corrosion process and the protection measures, the pipeline network and the design procedures and pipeline design case study and the feasibility measures
- 5. ٥ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 2. INTENDED LEARNING OUTCOMES (ILO’s) a. Knowledge and Understanding – Pipeline manufacturing, Materials, Fittings, Installation and Construction – Measuring instrumentation and leak detection – Pipeline maintenance and repair – Pipeline network and piggingPigging b. Intellectual Skills – Thinking skills for design analysis – Systemic skills for material selection – Creative thinking for water hammer and cavitation detection – Creative thinking for safety system analysis and pig selection
- 6. ٦ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 2. INTENDED LEARNING OUTCOMES (ILO’s) c. Professional Skills – Design calculation – Inspection methods – Pipeline protection – Case study procedures d. General and Transferable Skills – Operation reporting – Hazard awareness – Computer application
- 7. ٧ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 3. CONTENTS Lab/Tutorial Lectures Contents - - - 2 4 2 Party 11: Pipeline rehabilitation Part 12: Leak detection and SCADA system Part 13: Risk assessment 2 - - - 4 4 2 2 Part 7: Instrumentation and Pigging Part 8: Pipeline maintenance Part 9: Pipeline defects Part 10: Corrosion in pipeline - 2 2 2 6 4 Part 4: Pipeline Components Part 5: Design of Pipelines Part 6: Planning and Construction of Pipelines - 2 2 2 8 8 Part 1: Gas Piping System Part 2: Single phase Incompressible flow of Newtonian Single Part 3: Phase Incompressible Flow of Newtonian
- 8. ٨ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 4. TEACHING AND LEARNING METHODS 4.1 Lectures, including slide show and power point presentations 4.2 Case studies ended by discussions 4.3 Tutorial and Practice classes for problems answer. 4.4 Laboratory work and reports
- 9. ٩ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 5. STUDENT ASSESSMENT METHODS Most of the skills Assess Final exam 5.6 practical, general and transferable skills Assess Midterm Exam 5.5 group work and communication skills Assess Presentation 5.4 intellectual and professional skills Assess Case Study 5.3 knowledge and understanding Assess Assignment 5.2 willing to learn Assess Attendance 5.1
- 10. ١٠ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair Assessment schedule Week 30 Final exam Assessment 5.6 Week 12 Midterm Exam Assessment 5.5 Week 15 Presentation Assessment 5.4 Week 10 Case Study Assessment 5.3 Biweekly Assignment Assessment 5.2 Weekly Attendance Assessment 5.1 Time Assessment Type Assessment No.
- 11. ١١ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair Weighting of Assessment 60 Final exam Assessment 5.6 100 Total Total assessments 20 Midterm Exam Assessment 5.5 5 Presentation Assessment 5.4 5 Case Study Assessment 5.3 5 Assignment Assessment 5.2 5 Attendance Assessment 5.1 Weight, % Assessment Type Assessment No.
- 12. ١٢ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 6. LIST OF REFERENCES 6.1 Course Notes – Course notes will be handed to the students or downloaded from the website 6.2 Essential Books – George A., Antaki, Piping and Pipeline Engineering: Design, Construction, and Repair (Mechanical Engineering, Volume 259, 2003) – McAllister, W., Pipeline Roles of Thumb Handbook, Fifth Edition, 2005
- 13. ١٣ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 6. LIST OF REFERENCES 6.3 Recommended Books – Lee, R.R., Pocket Guide to Flanges, Fittings and Piping Data, 2003 – Frankland, Thomas W., The Pipe Fitter’s and Pipe Welder’s Handbook, 1999 – Graves, W.V., The Pipe Fitters Blue Handbook, – Peabody, A.W., Control of Pipeline Corrosion 6.4 Periodicals, Web Sites, … etc. 6.5 Selected Software – Pipeline Toolbox (Enterprise Edition) www.technical toolboxes.com/software/pipeline_enterprise.htm,
- 14. ١٤ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair 7. COURSE COORDINATOR Prof. Dr. Abdel-Alim Hashem Date: 2/15/2006
- 15. ١٥ PE 607: Oil & Gas Pipeline Design, Maintenance & Repair QUESTIONS