Css 2 ndsem_q3_usedofhandtools 2222
- 1. BRIAN G. MAGAN ICT-CSS TEACHER Computer System Servicing
- 3. USING HAND TOOLS (UHT) BRIAN G. MAGAN ICT-CSS TEACHER Computer SystemServicing
- 6. OBJECTIVES: At the end of this Lesson, the learners shall be able to: 1. Identify tasks to be undertaken properly 2. Identify and select appropriate hand tools according to the task requirements 3. Check appropriate hand tools for proper operation and safety 4. Observe all safety procedures in using tools at all times.
- 7. Definition of Terms Bin - a container or enclosed space for storage. Computer chassis - the enclosure that contains most of the components of a computer. Diagnostic tools - used to test the integrity of circuits and the quality of electricity in computer components and to test the functionality of computer
- 8. Definition of Terms Hazards - risks; dangers. Insulation - a material that reduces or prevents the transmission of heat or sound or electricity. Nozzle -a projecting part with an opening, as at the end of a hose, for regulating and directing a flow of fluid.
- 9. Definition of Terms Preventive - intended or used to prevent or hinder. Static electricity - an accumulation of electric charge on an insulated body. Tool - a handheld device that aids in accomplishing a task. Toolkit - a set of tools designed to be used together or for a particular purpose.
- 10. Acronyms ESD - Electro-Static Discharge USB - Universal Serial Bus LCD - Liquid Crystal Display
- 11. Proper Tool Selection A tool is a handheld device that aids in accomplishing a task. Tools range from a traditional metal cutting part of a machine to an element of a computer program that activates and controls a particular function
- 12. Preparing for the Task How do you select the best tool for the job?
- 13. Preparing for the Task Selecting the best tool for each task requires training in the proper use of the tools, field experience in their safe use, and following the manufacturer’s guidance and instructions for that specific tool.
- 14. Safe Use of Tools Environmental Safety and Health Program requires the following: All tools be kept in good condition with regular maintenance The right tool be used for the job Each tool be examined before use AND damaged or defective tools NOT to be used
- 15. Safe Use of Tools Environmental Safety and Health Program requires the following: Tools be operated according to manufacturer’s instructions The right protective equipment for the tool and activity be used
- 16. Hardware Tools Hardware tools are grouped into these four categories: Electro-Static Discharge (ESD) tools Hand tools Cleaning tools Diagnostic tools
- 17. Electro-Static Discharge (ESD) Tools Static electricity is easily generated by friction on carpets, tile flooring, clothing, hair, fabric, etc. Grounded anti-static work mats used with anti-static wrist straps provide the most basic means for the controlled discharge of electro-static electricity.
- 18. Example of ESD Tools Anti-static wrist strap - used to prevent ESD damage to computer equipment.
- 19. Example of ESD Tools Anti-static mat - used to stand on or place hardware on to prevent static electricity from building
- 20. Proper use of Antistatic Wrist Strap
- 21. Proper use of Antistatic Mat
- 22. Hand Tools A hand tool is a device for performing work on a material or a physical system using only hands.
- 23. Example of Hand Tools Flat head screwdriver - used to loosen or tighten slotted screws.
- 24. Example of Hand Tools Philips head screwdriver - used to loosen or tighten crosshead screws.
- 25. Example of Hand Tools Torx screwdriver - used to loosen or tighten screws that have a star- like depression on the top, a feature that is mainly found on laptop.
- 26. Example of Hand Tools Needle-nose plier - used to hold small parts.
- 27. Example of Hand Tools Wire cutter - used to strip and cut wires.
- 28. Example of Hand Tools Tweezers - used to manipulate small parts. Part retriever - used to retrieve parts from location that are to small for your hand to fit.
- 29. Example of Hand Tools Flashlight - used to light up areas that you cannot see well.
- 30. Proper Use of Hand Tools Use the proper type and size of screwdriver by matching it to the screw. Do not over tighten screws because the threads may become stripped.
- 31. Proper Use of Hand Tools CAUTION! If excessive force is needed to remove or add a component, something may be wrong. Magnetized tools should not be used around electronic devices. Pencils should not be used inside the computer because the pencil lead can act a conductor and may damage the computer components.
- 32. Cleaning Tools Lint-free cloth - used to clean different computer components without scratching or leaving
- 33. Cleaning Tools Compressed air - used to blow away dust and debris from different computer parts without touching the components.
- 34. Cleaning Tools Cable ties - used to bundle cables neatly inside and outside of a computer.
- 35. Cleaning Tools Parts Organizer – Used to hold screw, jumpers, fasteners and other small parts and prevents them from getting mixed together.
- 36. Proper Use of Cleaning Materials To clean computer accessories: Use mild cleaning solution and lint-free cloth to clean computer cases, outside of monitor, LCD screen, CRT Screen and mouse. Use compressed air to clean the heat sink. Use Isopropyl alcohol and lint-free swabs to clean the RAM. Use hand-held vacuum cleaner with a brush attachment to clean a keyboard.
- 38. Diagnostic Tools Multimeter- Used to test the integrity of circuits and the quality of electricity in computer components.
- 39. Diagnostic Tools Loopback Adapter - used to test the functionality of computer ports.
- 41. What tool is used to loosen or tighten crosshead screws. A B C
- 42. Very Good! Next
- 43. What tool is used to loosen or tighten screws that have a star-like depression on the top. A B C
- 44. Very Good! Next
- 45. What tool is used to retrieve parts from location that are to small for your hand to fit. A B C
- 46. Very Good! Next
- 49. TASK 2 - choose at least 5 from the tools shown and describe its uses and on how to use them safely.
- 50. Websites: Paul Goodman 2019 https://turbofuture.com/computers/Computer-Basics-10-Examples-of-Output- Devices © 2020 CBS Interactive. https://www.zdnet.com/article/best-cloud-storage-services/ ©2008-2020 World Wide Web Foundation. This work is licensed under a Creative Commons Attribution 4.0 International Licence https://webfoundation.org/about/vision/history-of-the-web/ https://www.cisco.com/c/en/us/products/security/advanced-malware-protection/what-is- malware.html#:~:text=Malware%20is%20a%20contraction%20for,spyware%2C%20adware%2C%2 0and%20ransomware. https://neosmart.net/wiki/disk-cleanup/ https://en.wikipedia.org/wiki/Disk_Cleanup e-chsmodules, www.coursehero.com, deped.gov.ph/ComputerSystemServicing module https://www.mustangbols.com/animation-2d/perform References
- 52. T A S K 2 In your home/neibor/relatives (as long as you don't need to travel in a distance) look for an actual hand tools available (minimum of 5 hand tools) take a selfie on each of the tool and write a caption in every picture. the caption should be the name of the hand tool and the used of it.