cv new
Download as DOC, PDF1 like545 views
This document is a resume for Jay de Asis Martinez detailing his education and work experience in machining roles. It lists his college degree in Mechanical Engineering and vocational training. His work experience includes roles as a CNC Set-Up Operator, Gear Cell Machinist, Large Body Cell Machinist, and Machine Operator. It provides details on the machines operated and skills used in each role. References and licenses are also included.
cv new
- 1. JAY DE ASIS MARTINEZ 3736 Millwoods road, Edmonton, Alberta, T6k3H8, Canada E-mail Add.: jmartinez19726@yahoo.com Phone No.: +1780-655-2290 EDUCATION Vocational : Technical Education and Skills Development Authority (TESDA) Course : General Machine Shop September 2002 – July 2003 College : West Negros College Bacolod City, Negros Occidental Course : Bachelor of Science in Mechanical Engineering 1989-1994 High School : Domingo Lacson National High School Sta. Clara Subdivision, Bacolod City Negros Occidental 1985 – 1989 WORK EXPERIENCES CNC SET-UP OPERATOR STREAMFLO INDUSTRIES LTD. CNC Department 4505 74 avenue, Edmonton, February 2013 – present Alberta, Canada GEAR CELL MACHINIST MOOG CONTROLS CORP., PHILS. Gear Cell Area Baguio Economic Zone September 2010 – January 2013 Loakan Rd., Baguio City, Philippines 1
- 2. LARGE BODY CELL MACHINIST MOOG CONTROLS CORP., PHILS. Large Body Cell Area Baguio Economic Zone April 2005 – September 2010 Loakan Rd., Baguio City, Philippines MACHINE OPERATOR MOOG CONTROLS CORP., PHILS. Functional Grinds/ CNC Mills Baguio Economic Zone July 1998 – April 2005 Loakan Rd., Baguio City, Philippines DRAFTSMAN DISTILERIA BAGO Engineering Department Km. 14. Taloc Bago City, Negros Occidental GOVERNMENT LICENSES • MECHANICAL ENGINEER PRC No. 47709-98 Date Registered: March 17, 1995 • NATIONAL CERTIFICATE II in MACHINING Certificate No. 11150302002959 Date Issued: September 10, 2011 SPECIAL / ADVANCED SKILLS • Operation / Set-up of: o CNC Lathe Machines o CNC Horizontal Milling Machines o CNC Vertical Milling Machines o CNC Outside and Internal Cylindrical Grinder o CNC Gear Hobber and Shaper Machines o NC Large Surface Grinder o NC and CNC EDM Machines • Basic CNC Machine Programming 2
- 3. • SMAW and Oxyacetylene Welding • Drafting • Basic Metrology • Conventional Machining o Lathe o Milling o Surface Grinder o Universal OD Grinder o Drill Station REFERENCES Mr. Alvin Antonio A. Barrientos Technical Coordinator Gear Cell Area Moog Controls Corp. (074) 447-3355 loc. 266 Cell #: +639209112960 3
- 4. Mr, Ferdinand C. Gallego Shift Supervisor Large Body Cell Moog Controls Corp. (074)447-3355 Cell # +639178088107 DETAILED JOB DESCRIPTION NAME: JAY DE ASIS MARTINEZ E-mail: jmartinez19726@yahoo.com Mailing address: Blk 15 Lot 19 Marville Subdivision, Irisan, Baguio City Philippines 2600 Cell No.: +639997223618/ +639327590452 Verified, witnessed and noted by: ________________________________ Mr, Ferdinand C. Gallego Shift Supervisor Large Body Cell MOOG CONTROLS CORPORATION, Philippine Branch (074)447-3355 Cell # +639178088107 COMPANY NAME: MOOG CONTROLS CORPORATION, Philippine Branch COMPANY ADDRESS: Baguio City Economic Zone, Loakan Road, 2600 Baguio City, Philippines 2600 Tel. Nos.: (074) 447 – 3352, 447 – 3353, 447 – 3355 Fax No.: (+63) 74 - 442 - 3173 4
- 5. COMPANY PROFILE In 1951, an inventor and entrepreneur developed a device called the electro-hydraulic servovalve. This device, which works by a tiny electrical impulse into a precise and powerful movement, revolutionized the aerospace industry, and led to the creation of the company we know today as MOOG, INC., named after the founder, William ‘Bill’ C. Moog. Moog Controls Headquarters (Main) is located at East Aurora, New York, USA. With twenty-four subsidiaries located throughout the globe, Moog is now widely recognized as a world leader in the design and manufacture of precision motion control components and systems. Moog Controls Corporation – Philippine Branch is located at the Baguio City Economic Zone (BCEZ), Loakan Road, Baguio City, Philippines. Its operations started way back December 1984, with more than one thousand (1,000) employees at present. This company produces and assembles quality precision motion control components such as servovalves and servoactuators for aerospace and industrial use. The products are shipped to the customers through Circle Freights. To name a few, the demanding customers in the world of Moog Controls - Philippines include BOEING, MCDONNEL DOUGLAS AND AIRBUS. MANUFACTURING / FABRICATION SHOP: Position: GEAR CELL MACHINIST Inclusive Date: September 2010 to present JOB SUMMARY: As a Gear Cell Machinist, I do a variety of operations on all types of materials on a gear hobber, gear shaper, gear grinder, broach, lathe or an N/C lathe, a mill or an N/C mill, a grinder, an EDM, a hone, lap, and deburr. I set-up and run one or more machines simultaneously as operation requires. I am not required to be an expert in more than one family of machines (lathes, mills, gear hobber, shaper, etc.). My responsibility may cover running more than one machine. TYPICAL PARTS: Ring Gears, Sun Gears, Pinions, Planet Gears, Spur Gears, Arm Assemblies, etc. DETAILED JOB DESCRIPTION AS GEAR CELL MACHINIST: • Inspects produced parts using precision instruments per blueprint and operation sheet requirement. 5
- 6. • Performs set-up and runs machines, trains and provides guidance for new operators and performs all other operator level functions. • Operates machines outside my area of expertise • Participates in the planning of work within the Cell and helps in solving problems occurring within the Cell. • Performs the necessary coordination to consistently maintain the effective utilization of time, tooling, equipment and other resources within the cell area. • Coordinates with other personnel to maintain the most effective workflow and ideal throughput to identify bottlenecks and achieve line balance in a cell environment. • Inspects all works performed, detects unusual conditions, (defective materials, and deviate parts), recognizes errors in blueprints and operation sheets, has knowledge in gear measuring equipment. • Performs preventive maintenance for the machine: coolant refilling, regular checking of lubrication oil and hydraulic oil levels and regular machine cleaning every after shift. MACHINES OPERATED IN GEAR CELL MACHINING: • KELLENBERGER KEL-VARIA URS 250/1000 - is a precision CNC external and internal cylindrical grinding machines with 4 automatic indexable grinding wheels (2 external and 2 internal). This uses HEIDENHAIN GRINDPLUSIT CONTROL SYSTEM. Programs are uploaded via DNC or thru USB drive. • GLEASON PFAUTER GP200S SHAPER - is a 6-axis CNC shaping machine designed to produce internal and external cylindrical gears as well as other profiles and forms on cylindrical work pieces that can be shaped, from as small as 2.0 inches to as large as 8.0 inches. Also suitable for the production of profiles by applying the single indexing method. It has a FANUC series 160i-M CNC 32-bit controller with digital drives. Programs are uploaded into the machine via floppy disc drive. • GLEASON 125GH CNC HOBBER - is a 6-axis CNC hobber that delivers a host of long-sought benefits for the production of gears from as small as 0.25 of an inch to as large as 8.0 inches. It has a FANUC series 180i-MB CNC 32-bit controller with digital drives. It provides automatic set-up and control of axial feed, radial feed, hob position, hob speed, hob to work ratioing and hob swivel setting. Programs are uploaded into the machine via floppy disc drive. 6
- 7. • OKUMA LT300-M - machining functions and operations of this machine is the same as the other Okuma CNC Lathe Machines. This PC-fusion machine only differs in its controls and uses OSP-P200L system and is Window XP based. Programs are uploaded into the machine via DNC or thru USB drive. • OKUMA LT25-M – same as other Okuma CNC lathe machines but uses OSP=E100L system. • OKUMA LT15 MY - same as other Okuma CNC lathe machines but uses OSP=E100L system and it has a Y- axis on its upper turret. • OKAMOTO IGM-15NC – is a precision CNC internal grinder which uses conversation input system or ISO programming. It has FANUC series 18i-TB control system with digital drives. Programs are uploaded via DNC or thru floppy disk. • OKUMA MA -50 HB – is a CNC controlled horizontal milling machine which has 10 pallets and tool carousel capable of holding 200 tools which is CAT50 types. This has OSP-U100L system. • OKUMA-GA – is an external diameter CNC grinding machine with almost the same controls as other Okuma lathe machines. MANUFACTURING / FABRICATION SHOP: Position: LARGE BODY CELL MACHINIST Inclusive Date: April 16, 2005 - September 2010 JOB SUMMARY: As a Large Body Cell Machinist, I perform a variety of operations on all types of materials, such as titanium alloys and aluminum alloys on a CNC horizontal milling machine, CNC lathe. CNC EDM machine, on a hone, or deburr. I perform set-up and run one or more machines simultaneously as operation requires. TYPICAL PARTS: Inboard and outboard manifolds for boeing 777, boeing 767, boeing 787, Airbus A340, autopilot manifolds for boeing 737, etc. DETAILED JOB DESCRIPTION AS LARGE BODY CELL MACHINIST: 7
- 8. • Performs set-up and runs machines, trains and provides guidance for new operators and performs all other operator level functions. • Operates machines outside my area of expertise • Participates in the planning of work within the Cell and helps in solving problems occurring within the Cell. • Performs the necessary coordination to consistently maintain the effective utilization of time, tooling, equipment and other resources within the cell area. • Coordinates with other personnel to maintain the most effective workflow and ideal throughput to identify bottlenecks and achieve line balance in a cell environment. • Inspects all works performed, detects unusual conditions, (defective materials, and deviate parts), and recognizes errors in blueprints and operation sheets. • Performs preventive maintenance for the machine: coolant refilling, regular checking of lubrication oil and hydraulic oil levels and regular machine cleaning every after shift. MACHINES OPERATED IN LARGE BODY CELL MACHINING: • OKUMA MA-50HB - is a 6-axis CNC-controlled horizontal milling machine which uses OSP-U100L system. This machine is configured to hold up to 10 pallets, it has a 200-tools Carousel (CAT50 types). Programs are uploaded and downloaded using a floppy disc. • OKUMA MA-500HA SPACE CENTER – the same numerical control system as OKUMA MA-50HB except that this machine uses an upgraded OSP-U200L system, PC-fusion, full-touch screen and is windows XP based. It can be configured as five or ten pallets. • OKUMA MA-400HA – this has the same numerical control and OSP system interface as its bigger brother MA-500HA except that it uses a smaller tool holder, a CAT 40 types and capable of holding 154 tools and configured as two pallets only. • CHARMILLES P30 – is a CNC EDM machine which has a 10-tool carousel. 8
- 9. MANUFACTURING / FUNCTIONAL MACHINING/ CNC MILLS: Position: MACHINE OPERATOR Inclusive date: JULY 1, 1998 – SEPTEMBER 10,2005 JOB SUMMARY: I performed a complete range of turning, drilling, tapping, boring, burnishing and reaming operations on all Computer Numerical Control Machines (CNC). Perform all types of set-ups from simple to complex including fixture alignments and setting of tools. Work from part drawings and blueprints, operation sheets and program sheets. Check for program errors and worn or defective tools. Observe and suggest methods for more efficient machining. Detects defective parts and tooling, and notifies Technical Coordinator or Facilitator for unusual conditions. Set-up machines, trains and provides guidance for new CNC operators. My responsibility covers running more than one machine. DETAILED JOB DESCRIPTION AS A MACHINE OPERATOR: • Analyze manual and CNC grinds, manual and CNC lathe and CNC milling operation based on operation sheet per operation number • Operate most types of manual and CNC Grinding, EDM Machines, CNC Lathe Machines, and CNC milling machines and all the necessary attachments in the machine. • Set-up proficiently multiple manual and CNC grinding and milling machine based on operation sheet and blueprint. • Checks and examines grinding wheel and cutting tools, recognize and correct errors in tool geometry. • Preset different types of tools such as gun drills, boring tools, graflex, spot drills, end mills, reamers, inserts, etc. Use proper holders in accordance with specified preset length in operation sheets and establish the necessary tool offsets in the CNC controls depending on tool geometries. • Prove out new fixture and program on CNC grind and new program on CNC lathe. • Produce various types of machined parts made from various types of materials, from Aluminum Alloy to Steel. 9
- 10. • Applies blueprint reading and proper inspection procedures on various parts produced. • Inspects own work based on controlled dimension on operation sheet or blueprint per operation using various gages and precision measuring instruments with an accuracy of twenty millionths of an inch (0.00002”). Such measuring instruments are: Coordinate Measuring Machine, ZEISS Prismo CMM, Microhite, Digimatic Indicator, Optical Comparator, Tool Maker’s Microscope, Dial Indicator, Micrometers, Surface Plate, Gauge Block, Set Ring, Bore mic, Profilometer, Talyrond and Talysurf etc. • Identify process or operation problems and solves them with the proper information to the immediate supervisor, such as: CNC program related problems, tooling, process operation, non-conformities in parts and blue print and discrepancies in parts produced. • Maintains calibrated precision measuring instruments such as dial indicators, fixed gauges, micrometers, depth gauges and other measuring devices using specific set masters. • Provided and suggest methods for efficient machining to lessen run time / cycle of parts produced during machining. Request for Engineering Review, (RER). • Conduct actual training and provide guidance for new CNC operators. • Followed safety standard operating procedures set by the company. • Maintained good housekeeping in the shop and recommend provisions for pleasant work area. MACHINES OPERATED IN FUNCTIONAL AND CNC MILL MACHINING: • STUDER S21 – is a precision CNC external and internal cylindrical grinding machine capable of controlling very tight tolerances with digital drives and has .00001 inch graduation. It is built with 3 automatic indexable grinding wheels that can be used together thru conversational and ISO programming. This machine uses GE FANUC series 21i-TB control syste. Programs are uploaded via DNC. • STUDER ECO 650 – is almost the same as other CNC studer cylindrical grinding machines but only uses 1 external grinding wheel that is manually index to desired angle. This uses GE FANUC series 21i-T. • OKAMOTO IGM-15NC INTERNAL GRINDER • CHARMILLES P30 – CNC-controlled EDM machine • OKUMA MX-45VAE – CNC vertical milling machine which uses an OSP-U100L for older models and OSP-200L system and windows based interface for newer models. The holder uses CAT 40 types and has 40 tools its carousel. • SEMI-AUTOMATIC MACHINES: 10
- 11. o CHARMILLES EDM DIESINK o JONES & SHIPMAN SURFACE GRINDER o BROWN AND SHARPE SURFACE GRINDER o BROWN AND SHARPE UNIVERSAL GRINDING MACHINE o CINCINATTI MILACRON CENTERLESS MACHINE MEASURING INSTRUMENTS AND EQUIPMENT USED: • CARL ZEISS CMM – a computerized measuring machine that uses variety of probes that take contact on the part that is being measured; controlled by a CNC program for a particular part. Capable of measuring dimensions, diameter, radius, depth, roundness, run-out, parallelism, cylindricity, symmetry, angles and even gear profile up to an accuracy of 0.00005 of an inch. • SWISS MICROHITE – a digital measuring instrument used for measuring dimensions, locations, diameters, symmetry, run out, and angles. • MILITARY PORT TOOLS – a specially formed gage used in inspecting thread port features. • MICROMETER CALIPERS – a digital or a mechanical measuring instrument used in inspecting diameters and thickness of a part with an accuracy of up to 0.0001 of an inch. • VERNIER CALIPERS – a digital or a mechanical measuring instrument used in quick checking of diameters and thickness of parts that do not require high accuracy. • DIGIMATIC INDICATORS – is a measuring instrument used for checking the height or thickness and depth of a part with an accuracy of 0.0001 of an inch. • DEPTH MICROMETERS – used in measuring depths and steps. • THREAD PLUG AND RING GAGES – used in inspecting internal and external threads • BORE MICROMETERS – used in measuring internal diameters. • PLUG GAGES – consist of “go” and “no-go” pins, this gage is used for quick checking of hole diameters that do not require high accuracy. • OPTICAL COMPARATORS – this measuring instrument uses the shadow produced by the intense light focused on the part to be measured. It is capable of measuring even small features and angles like fillets and chamfers. • TOOLMAKERS’ SCOPE – is a microscope are able to view and measure hole diameters, linear distances, thread angles, thread pitch, tool edges, tool wear surfaces and small features like fillet radius, chamfers, and countersinks. 11
- 12. • AIR SPINDLE GAUGE – a precision measuring instrument used for measuring small internal diameters that require high accuracy. • SURFACE PLATE – a super flat surface used as a reference in inspection and in inscribing. • PROFILOMETERS – used in inspecting surface finishes. • TALYROND 290 – a precision instrument used in measuring the roundness of a cylindrical part. • TALYSURF – a precision instrument used in measuring the surface roughness and profile. It is capable of measuring tight tolerance surface finish and profile TRAININGS AND SEMINARS ATTENTED CERTIFICATIONS: MOOG Baguio Trainer’s Club November 29, 2007 MOOG Controls Corp., Philippine Branch BCEPZ, Loakan Rd. Baguio City, Philippines 5S Assessment Training December 16, 2006 MOOG Controls Corp., Philippine Branch 3.5 hours classroom BCEPZ, Loakan Rd. Baguio City, Philippines 24 hours workshop Professional Trainership Cluster November 11, 2006 MOOG Controls Corp., Philippine Branch 8 hours BCEPZ, Loakan Rd. Baguio City, Philippines 12
- 13. Foundations of Leadership Excellence October 7-8, 2006 Baguio Team 16 16 hours Organizational Change Consultant International Inc. Chalet Tepeyac, Baguio City Philippines Job Instruction Techniques (JIT) Practicum October 15, 2005 EVALUATOR MOOG Controls Corp., Philippine Branch BCEPZ, Loakan Rd. Baguio City, Philippines CNC Mills Training March 31-April 1, 2005 MOOG Controls Corp., Philippine Branch 8 hours BCEPZ, Loakan Rd. Baguio City, Philippines STATISTICAL PROCESS CONTROL (SPC) September 16-19; 22-24, 2003 MOOG Controls Corp., Philippine Branch 28 hours BCEPZ, Loakan Rd. Baguio City, Philippines Trainors’ Training on Job Instruction Technique June 25-July 4, 2003 Technical Education and Skills Development Authority 80hrs TESDA Region I Regional Training Center, San Fernando City, La Union, Philippines GENERAL MACHINE SHOP September 2, 2002-July 30, 2003 Technical Education and Skills Development Authority TESDA Regional Training Center- Baguio Loakan Baguio City, Philippines QUEST FOR EXCELLENCE on R.E.R. December 3, 2002 MOOG Controls Corp., Philippine Branch BCEPZ, Loakan Rd. Baguio City, Philippines ZERO ACCIDENT PROGRAM October 28-30, 2002 Department of Labor and Employment 24 hours Cordillera Administrative Region TESDA, Loakan Baguio City, Philippines 13
- 14. 14