cv_chandrashetty
- 1. CURRICULUM VITAE CHANDRASHETTY Email:chandrashetty2008@gmail.com MTech.(PDM) B.E.(Mech) Contact No: +91-9844249669 CAREER OBJECTIVES: To pursue a challenging career, this utilizes my knowledge to the maximum extent in an organization that can exploit my present skills and provide a platform for my career growth as well as help me in contributing my best to the development of the company. BEHAVIOURAL SKILLS: • Good communication skill. • Self-motivated and good team player. • Good analytical and problem solving skill. • Flexibility with an attitude to learn new technologies. • Confident of my ability to work independently & as a team member. PROFESSIONAL SUMMARY: • Presently working for DIEHL AIRCABIN Gmbh. from Cyient Ltd. as Senior Design engineer closely coordinating with clients for A-350 Cabin interiors projects. • 6 months exp. in ODS Offshore Design Solutions Pvt Ltd.as Technical Design engineer • 1 year experience in Tantra Infosolutions Pvt Ltd.as Design engineer • 1 year experience in Actualize Consulting Engineers (India) Pvt Ltd .as Design engineer. EXPERIENCE SUMMARY: • Good exposure to Surface, Part & Sheet metal Modeling, Detailing & development. • Good exposure to ATA25 & Aerospace Interior Products. • Good Exposer to Tubing (Piping) Design. • Good experience in Aerospace, Locomotive & Oil & Gas fields. • Good exposure to CNC Programming & Operations. • Good knowledge on GD&T Symbols & their applications. • Good knowledge on Stack up Analysis and DFMA. ACADEMIC QUALIFICATION: • MTech., in Product Design and Manufacturing(Part time), from B.M.S. College of Engineering Bengaluru, Visveswaraiah Technological University (V.T.U), Belgaum – (2011-Pursuing Project). • B.E., MECHANICAL ENGINEERING, from N.M.A.M. Institute of Technology Nitte Karkala, Visveswaraiah Technological University (V.T.U), Belgaum – (2005-08). • D.M.E., from D.A.C.G. Polytechnic Chikmagalore, B.T.E, Karnataka – (2000-04). • S.S.L.C., from Board of Secondary Education, Karnataka – (1997-98).
- 2. TECHNICAL SKILLS: • CAD Tools: CATIAV5 R18, Enovia(DMA2.2 & DMA2.3), TEAM CENTER, AUTODESK INVENTER Professional-11,2009, 2010 & 2011, Solid Works, AUTO CAD 2004 – 2011 & Analysis Tool like Ansys. • Packages: Ms-Office, Ms Word, Ms Excel, Power point etc. • Operating Systems: Windows NT/2000, Windows XP, Windows 07,UNIX(AIX) etc. PROJECT WORKS: Project 1: Project Name: INL-101040. Client: ATLAS COPCO PUNE. Description: INL-101040 is a dynamic air compressor used for compressing & storing of air. This is a type of axial air compressor sucks air axially & compresses dynamically with the help of axially arranged turbine blades. It is used in power plants, Drill Rigs etc. Role: Team member. • Sheet metal, Structural, piping and solid modeling. • Carried out various manufacturing drawings & their standards. Responsibilities: • Modeling of components like base frame, cooler, motor, piping, Cabin interiors etc & their drawings. • Check for the interference and assembly. • Check for Manufacturability, Applying GD&T, Stack up Analysis, Etc,,, Software used: CATIA V5 R17, Inventor-2011 & AUTO CAD. Project 2: Project Name: FWI(Air Caraïbes) S2FL & S2FR STOWAGES DESIGN -A350. Client: Diehl Aircabin GmbH, Laupheim. Description: Stowage is the amount of room available for stowing materials aboard an airplane. Stowages are an essential part of air travel, catering for passenger's personal possessions in a safe and contained way. Passengers want to carry more on to the aircraft, so the aircrafts wants add extra spaciousness to the cabin and the large overhead stowage bins to match growing cabin baggage volume requirements. Role: Team member. • Check & analyze the environment parts & assemblies in the cabin area to perform the design of specified stowage. • Create each part or sub-assembly or assembly, according to the functional requirements using master geometries. • Adding all the required Inserts and other standard parts used in line with the requirement. • Creation of respective detail drawings, assembly drawings, installation drawings as per the scope of project. • Creation of BOM in Team Center, Comparison of BOMs, Releasing process in PLM TOOL(Team Center).
- 3. Responsibilities: • Creation of Parametric Modeling of components & their drawings. • Check for the interference and assembly. • Check for Manufacturability, BOM, Applying GD&T, Etc,,, • Updating the Closing points after the Review done by Customer. Software used: CATIA V5 R20, Enovia(VPM) & Team Center 10. Project 3: Project Name: 2216-18 CTS system. Client: KEPPEL FELS. Description: The Conductor Tensioning System is a cassette style tensioning system. The CTS is a platform that from with-in itself, will apply a tension of 600 kips to the conductor. This CTS is designed for Jack-up installation below the drill floor. The system is designed to locate the BOP in any position 15’ port & 17’ STBD from the centerline, along the same plane. The CTS consists of a Conductor Tensioning Unit (CTU), Conductor Tensioning Platform (CTP), Conductor Tensioning Frame (CTF), Conductor Tensioning Rails (CTR), Sliding Floor Section (SFC), Storage Cassette to House Floor Sections, Hydraulic Power Unit (HPU), Accumulators and Control Package. Role: Team member. • Creation of General Arrangement Drawing, concept generation, concept modeling etc. • Structural and solid modeling etc. • Carried out various manufacturing drawings & their standards. Responsibilities: • Structural Modeling & Analysis of CTU, CTP, CTF, CTR, SFC & their drawings. • Check for the interference and assembly. Software used: Inventor-2011,PDM Tool Vault, Ansys & AUTO CAD. Project 4: Project Name: XCC ENNO cabin interior trims. Client: ALSTOM Transport - Reichshoffen, France. Description: The XCC Enno project is a set of regional trains for RGB client. The XCC Enno is a train that is produced by Alstom Germany and definition of XCC S5-S8 may serve as a model for certain fixtures. Role: Single point contact. • Check & analyze the environment parts & assemblies in the cabin area to perform the design of specified real parts. • Create each part or sub-assembly or assembly, according to the functional, manufacturability requirements. • Creation of all the required fasteners and other standard parts used in line with the requirement. • Creation of installation in PSN under cabin paneling to have various concepts, • Creation of respective detail drawings, assembly drawings, installation drawings with BOM as per the scope of project.
- 4. Responsibilities: • Creation of parts, Sub-assemblies, Assemblies & their drawings. • Creation of Ditto's(Standard parts Product), Creation of PSN Structure. • Check for the interference and assembly. • Check for Manufacturability, Applying GD&T, Stack up Analysis, Etc,,, Softwares used: CATIA V5 R18 & Enovia(DMA2.2&DMA2.3) . PERSONAL PROFILE: Father’s Name : Sagana Shetty Date of Birth : 11th March 1984 Marital Status : Married Nationality : Indian Languages Known : English, Hindi, & Kannada. Residence Address : #74/2, 2nd cross, 4th Block, Thyagaraja nagara, Bangalore-560028. Permanent Address : Doddabyadagere, Hebbal post, Belur tq, Hassan dst, Karnataka. ACHIEVEMENTS & HOBBIES: • Won prize in District level Quiz competition. • Won prizes in various sports (Volley ball, Cricket, Kokko Etc). • Playing Cricket and Carom. DECLARATION: I hereby declare that the information given above is true and correct to the best of my knowledge and belief. DATE: / /2016 PLACE: Bengaluru (ChandraShetty)