prakash.setty
- 1. SETTY.PRAKASH Email: prakash.setty015@gmail.com prakashchema@gmail.com contact number:+91-9611808980,+91-9717930108 Summary of Experience • 4.4years of experience in automotive domain and heavy engineering with respect to FEA. • Received training for macros, deck setup (Abaqus), contacts, etc. at Hella Germany. • Provided FEA support for Honda projects at Hella Germany. • 21Days onsite experience at Hella India Automative private Lmt ,Lippstadt Germany Specific Expertise • Static Analysis, Modal Analysis. • Creating non linear contacts using Abaqus. • Having good experience in shell, tetrahedral and hexahedral meshing. • Extensively worked on hyper mesh for various products like large mining trucks, track type tractors & two wheeler frame body, Cooling Value Actuator. • Strong visualization, creative and analyzing skills. • Involved in basic concepts of design development and Implementation. • Strong analyzing and technical skills. Work Experience • Hella India Automotive Private Limited, Gurgaon-Haryana. (May 2014 to present) • CAE-Engineer Sphinx Worldbiz Ltd. Onsite job in Hero Motocorp Ltd. Dahruhera, Gurgaon as CAE-ENGINEER. (May 2013 to March 2014) • Nove Global Technology Pvt. Ltd. Bangalore, onsite job in AXIS IT&T LTD Hyderabad. (March 2012 to March 2013) Education Details: • B.E in Mechanical engineering from PDIT Hospet, Karnataka under Visveswaraiah Technological University, India with an aggregate of 60%in 2011. Skills Summary: Meshing tools Pre-processing Hyper mesh, V 8, 9,10,11,12. Analysis toolsSolving Nastran, Abaqus. VisualizationPost-processing Abaqus, Hyper view. Design Tool UG,NX Responsibility • Regularly interacting with client and updating the weekly improvement of the project. • Inputs collection like Loads & Boundary conditions and Material properties. 1
- 2. • Report and quality check sheet preparation for the project as per the company • Reporting observations, preparing the detailed analysis report including the suggestions for the design modifications if required. PROFESSIONAL EXPERIENCE : Hella India Automotive Private Limited Project Description: Scope of project is meshing of the Standard Hero Moto corp. two wheeler frames with the help of Weld drawings provided by the client. Entire mesh is of 1D, 2Dand 3D Quality was done as per the hero standards.”Leap 20 frame Body Modeling in tetra meshing with weld Beeds and also I did some post processing in nastran (Liner Static, FRF, and Modal Analysis Models Sari Gauged, Carrier model, FRF (Frequency Response Function), Frame Body linear static Analysis. Modeling Fixture Component total tetra Meshing connection analysis. Meshing in Pleasure Engine parts with (REB2 and REB3, beam Element in Nastran) Post Process in Nastran LINEAR STATIC. 3 Project Name: 797F Truck Frame Client CATERPILLAR Organization Axis IT&T Ltd, India Software HYPERMESH AndAbaqus Module: Heavy Engineering. 1.Project Name Structural analysis of APS Customer Daimler & Chrysler USA, Nissan, Renault, Maruti, Tata Motors, Honda,PSA Germany. Role / Responsibilities FE-Modelling (1D,2D,3d,mesh) as per HIA Standard guidelines, Defining Boundary Conditions, Load application, Report Preparation & design optimisation. Description To check whether the accelerator pedal sensor can take the load as per customer specification or not. Structural analysis has been done for the Operational, Reverse and Lateral directions.(MAT:PA66 GF40 ) Also optimised design has to be suggested. Tools Used Abaqus, Hypermesh, AbaqusViewer 1A.Project Name Random & Response Analysis of WGA (Waste gas actuator) Customer Renault Germany, Honda in Japan Role / Responsibilities FE-Modelling (Tet. mesh) as per HIA Standard guidelines, Defining Boundary Conditions, Load application, Report Preparation & design optimisation. Description Random and response analysis of waste gate actuator. To check the modes for PSD and find out state of resonance Tools Used Abaqus, Hypermesh, AbaqusViewer, Hyper view. 2
- 3. Project Description: Scope of the project is to mesh the standard Frame as per the weld criteria requirement of Caterpillar standards. FEA model was created with the hex-mesh, shell-mesh as well as the tetra mesh and embedding wherever required. G-load cases are prepared for LCF and HCF and stresses are compared with Endurance of the weld and parent material, Yield limits and modal analysis of the structure and studying the mode shapes of the first 10 modes. After structure is passing necessary criteria results were shared with the client through final report preparation. 4 Project Name: 793F_Truck Body Modeling Client CATERPILLAR Organization Axis IT&T Ltd, India Software HYPERMESH AndAbaqus Module: Heavy Engineering. Project Description: Scope of the project is to perform FEA-modeling for 793F_Truck meshing1D, 2D, 3D, (Shell coating Pay Load) and to maintain weld splits as per CAT standards. Quality was done as per the Caterpillar standards in the series (773F, 774F, and 777F) Project Description: Centre of excellence project from Caterpillar. Scope of work is to perform the BJA meshing (cone of compression) for the 10 bolts of different diameter which supports the bracket attached to the hydraulic tank by creating the contacts between the bolt-head and washer as well as the abutments and applying the pretension at the shank region for probing the stress. To run the modal analysis of the structure and studying the mode shapes of the first 10 modes and connection. 5 Project Name: 775G_BJAModeling (Bolted joint analysis) Client CATERPILLAR Organization Axis IT&T Ltd, India Software HYPERMESH And Abaqus Module: Heavy Engineering. 3
- 4. Project Description: Worked is on FEmodelingof the cab. Weld split criteria is maintained as per the caterpillar standards. Mesh is the combination of the Shell mesh, Hex mesh and the Tetra mesh. Connectivity is given by observing the geometry carefully. 8 Project Name: Blade and the Adapter Assembly. Client CATERPILLAR Organization Axis IT&T Ltd, India Software HYPERMESH AndAbacus Module : Heavy engineering Project Description: Scope of work is meshing of the Standard blades along with the adapter with the help of weld drawings provided by the client. Entire mesh is of the tetrahedral mesh Connection with REB2 and REB3, Beam Elements. Declaration: I hereby declare that all the above furnished information is true to my belief and knowledge. Regards,Address, Prakash.setty,S/O S.Mallikarjuna, Idapanoor (post), TQ Raichur (dist), PIN: 584140 6 Project Name: CAB meshing Client CATERPILLAR Organization Axis IT&T Ltd, India Software HYPERMESH AndAbaqus Module: Heavy Engineering. 4