Data sheet en_us_1893111307
- 1. Communications Systems | LBB 1990/00 Plena Voice Alarm Controller LBB 1990/00 Plena Voice Alarm Controller ▶ Heart of the Plena Voice Alarm System ▶ Six-zone system controller ▶ Built-in 240 W amplifier ▶ 12 business and emergency control inputs ▶ EN 54‑16 and EN 60849 compliant The Plena Voice Alarm Controller is the heart of the voice Functions alarm system. It is the basis of the Plena Voice Alarm The controller has two BGM source inputs and a mic/line System, and has all the essential functionality for input with configurable priority, speech filter, phantom compliance with the EN 60849 and 54‑16 standards, power and selectable VOX activation. A total of 16 priority including full system supervision, loudspeaker line levels can be specified for microphone, call stations and impedance supervision, a supervised emergency trigger inputs for optimum system flexibility. microphone on the front panel and a supervised message manager. The powerful 240 W output section has six transformer- isolated 100 V constant-voltage outputs for driving 100 V The messages can be merged to allow even more flexible loudspeakers in six separate zones. The 100 V-technique use of pre-recorded announcements and evacuation reduces line losses on longer distances and provides easy messages. The controller can be used as a stand-alone parallel connection of multiple loudspeakers. All zones system with up to six zones, or expanded to up to may be individually selected from the front panel, and the 60 zones using additional six-zone routers. Up to eight call BGM output level in each zone can be individually set in stations can be connected. Interconnections are made six steps. The controller supports A/B wiring. using standard RJ45 connectors and shielded CAT-5 cable. Configuration software is provided on the CD included with the unit. The CD also includes many useful programs, A built-in 240 W amplifier provides the power for the such as MP3-ripping software, a sample-rate converter, emergency call channel and BGM. Additional Plena various audio and visual tools, and free, MP3-coded Amplifiers can be added to provide two-channel music. operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions. www.boschsecurity.com
- 2. 2 | LBB 1990/00 Plena Voice Alarm Controller The amplifier output is also available as a separate output Interconnections on 100 V and 70 V. A separate 100 V call-only output Front provides addressing for an area where BGM is not • Microphone socket required but where priority announcements are. Six Back configurable volume-override output contacts are • 12 loudspeaker outputs available for overriding local volume controls during • External amplifier input priority calls. Both four-wire and three-wire schemes are • Amplifier output (on 100 V) supported. An LED meter monitors the output. • Backup power input • Call output Up to 255 messages can be stored in the internal 16 MB • Six volume override outputs flash ROM, without a need for battery backup. Each • Three status outputs message can have any length within the total available • 12 trigger inputs capacity. Messages and configurations are uploaded from • 24 VDC output • Two call station connectors (redundant) a PC via USB 2 into the memory, after which the unit • USB 2 connector operates without a PC connection. The standard WAV- • Two DE-9 connectors (reserved) format is used for the messages, and sample rates of • External amplifier output 8 kHz up to 24 kHz with 16-bit word length (linear PCM) • Line output connectors are supported. This gives up to 17 minutes of recording • Two BGM inputs time with CD-quality signal-to-noise ratio. • PC call station input (reserved) • Two RC station connectors (redundant) The unit has 12 contact trigger inputs for business and • Connector to LBB 1992/00 (router) emergency (EMG) calls. Each can be configured for a message consisting of a sequence of up to eight wave files. In this way some wave files may be used in various Certifications and Approvals combinations with other messages, optimizing flexibility and the amount of storage space used . Multiple Region Certification messages can be merged to form one integrated message. Europe CE TUV certificate IEC60849 A zone selection, together with this sequence can be Declaration of Conformity configured for each trigger input. TUEV- Controls and indicators SUED Front Poland CNBOP • LED power meter • 13 system fault LEDs Safety acc. to EN 60065 • Two fault state buttons Immunity acc. to EN 55103-2 • Two emergency state buttons • Six EMG zone status LED pairs Emission acc. to EN 55103-1 • Six EMG zone select buttons Emergency acc. to EN 54‑16 / EN 60849 • Six BGM zone select LEDs • Six BGM zone select buttons • Six BGM zone volume control knobs • Two BGM source status LEDs Installation/Configuration Notes • Three knobs for BGM volume, treble, and bass levels • All-call button • Indicator test button • EMG state button • Alert message button Back • Three service settings DIP switches • Calibration switch • Four system configuration DIP switches • Mains voltage selector • Power switch • Power cord socket • Mic/line level switch • Three DIP switches for VOX, speech, phantom power LBB 1990/00 rear view • Microphone volume control knob • Digital message volume control screw • Monitoring speaker volume control knob
- 3. LBB 1990/00 Plena Voice Alarm Controller | 3 Parts Included Mains power supply S/N (flat at max volume) >70 dB Quantity Component S/N (flat at min volume/muted) >75 dB 1 LBB 1990/00 Plena Voice Alarm Controller Headroom >25 dB 1 Power cord Trigger Inputs 12 x (6 EMG, 6 business) 1 Set of 19” mounting brackets Connectors MC1,5 / 14-ST-3,5 1 Plena VAS CD 1 Installation and User Instructions Activation Programmable 1 USB cable Supervision On EMG inputs, programmable Supervision method Series / parallel resistor 100 V input Technical Specifications Connector MSTB 2,5 /16-ST Power handling capacity 1000 W Electrical Tape output 1x Mains power supply Connector Cinch, 2 x mono Voltage 230/115VAC, ±15%, 50/60 Hz Nominal level 350 mV Current inrush 8A Impedance <1 kohm Max power consumption 600 VA Loudspeaker outputs Battery power supply Connectors MSTB 2,5 /16-ST, floating Voltage 24 VDC, +15% / -15% 100 V output 700 W rated per zone Current max 14 A Volume override types 3-wire, 4-wire (24 V), 4-wire failsafe Performance BGM zone output 70 / 50 /35 /25 / 18 / 13 V for Output power (rms/maximum) 240 W / 360 W Attenuation 0 / -3 / -6 / -9 / -12 / -15 dB Power reduction on backup -1 dB 120 / 60 / 30 / 15 / 8 /4 W power Output Contacts Frequency response 60 Hz to 18 kHz (+1/-3 dB at -10 dB Connector Type MC 1,5/14-ST-3,5 ref. rated output) Rating 250 V, 7A, voltage free Distortion <1% at rated output power, 1 kHz Emergency active relay NO / COM / NC Bass control -8/+8 dB at 100 Hz Call active relay NO / COM / NC Treble control -8/+8 dB at 10 kHz Fault relay NO / COM / NC normally energized (fail- Mic/line input 1x safe) Connector XLR, 6.3 mm jack General purpose relays NO / COM Sensitivity 1 mV (mic), 1 V (line) Power consumption Impedance >1 kohm (mic); >5 kohm (line) Mains operation S/N (flat at max volume) >63 dB (mic); >70 dB (line) Max power 550 W S/N (flat at min volme/muted) >75 dB -3dB 440 W CMRR >40 dB (50 Hz – 20 kHz) -6dB 340 W Headroom >25 dB Pilot tone* 136 W Speech filter -3 dB at 315 Hz, high-pass, 6 dB/oct Idle 60 W Phantom power supply 12 V (mic mode only) 24 VDC operation VOX trigger level -20 dB (100 µV mic / 100 mV line) Max power 14.0 A (336 W) or via input contact -3 dB 12.5 A (300 W) Limiter Automatic -6 dB 9.5 A (228 W) Line input (BGM and PC call station) Pilot tone* 2.5 A (60 W) Connector Cinch, stereo converted to mono, unbal- Idle 0.9 A (22 W) anced * 20 kHz -20dB with maximum loudspeaker load Sensitivity 200 mV Impedance 22 kohm www.boschsecurity.com
- 4. 4 | LBB 1990/00 Plena Voice Alarm Controller Messages Ordering Information Data format WAV-file, 16-bit PCM, mono LBB 1990/00 Plena Voice Alarm Controller LBB1990/00 Supported sample rates (fs) 24 / 22.05 / 16 / 12 / 11.025 / 8 kHz fully supervised main control unit for Voice Alarm applications. Built-in 240 W amplifier. Frequency response Accessories at fs=24kHz 100 Hz to 11 kHz (+1/-3 dB) PLN‑VASLB‑NL Plena VAS labels, Dutch PLN-VASLB-NL at fs=22.05kHz 100 Hz to 10 kHz (+1/-3 dB ) (10 pcs) at fs=16kHz 100 Hz to 7.3 kHz (+1/-3 dB ) Dutch, set of 10 pieces, and can be placed on at fs=12kHz 100 Hz to 5.5 kHz (+1/-3 dB) the front panel at fs=11.025kHz 100 Hz to 5 kHz (+1/-3 dB) PLN‑VASLB‑DE Plena VAS labels, German PLN-VASLB-DE (10 pcs) at fs=8kHz 100 Hz to 3.6 kHz (+1/-3 dB) German, set of 10 pieces, and can be placed Distortion <0.1% at 1 kHz on the front panel S/N (flat at max volume) >80 dB PLN‑VASLB‑FR Plena VAS labels, French PLN-VASLB-FR Memory capacity 16 MB Flash ROM (10 pcs) French, set of 10 pieces, and can be placed Recording / playback time 1000 seconds at fs = 8 kHz on the front panel 333 seconds at fs = 24 kHz PLN‑VASLB‑ES Plena VAS labels, Spanish PLN-VASLB-ES Number of messages 255 max (10 pcs) Supervision Flash ROM Continuous checksum control Spanish, set of 10 pieces, and can be placed Supervision DAC 1 Hz pilot tone on the front panel Data retention time >10 years PLN‑VASLB‑IT Plena VAS labels, Italian PLN-VASLB-IT (10 pcs) Mechanical Italian, set of 10 pieces, and can be placed on Dimensions (H x W x D) 144 x 430 x 370 mm the front panel (19" wide, 3U high) PLN‑VASLB‑FI Plena VAS labels, Finnish PLN-VASLB-FI Weight Approx. 21.17 kg (10 pcs) Finnish, set of 10 pieces, and can be placed Mounting 19”rack on the front panel Color Charcoal PLN‑VASLB‑CZ Plena VAS labels, Czech PLN-VASLB-CZ Environmental (10 pcs) Czech, set of 10 pieces, and can be placed Operating temperature -10 ºC to +55 ºC (14 ºF to +131 ºF) on the front panel Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) PLN‑VASLB‑RU Plena VAS labels, Russian PLN-VASLB-RU Relative humidity <95% (10 pcs) Russian, set of 10 pieces, and can be placed Acoustic noise level of fan <48 dB SPL at 1 m (max output) on the front panel PLN‑VASLB‑SE Plena VAS labels, Swedish PLN-VASLB-SE (10 pcs) Swedish, set of 10 pieces, and can be placed on the front panel PLN‑VASLB‑DK Plena VAS labels, Danish PLN-VASLB-DK (10 pcs) Danish, set of 10 pieces, and can be placed on the front panel PLN‑VASLB‑PL Plena VAS labels, Polish PLN-VASLB-PL (10 pcs) Polish, set of 10 pieces, and can be placed on the front panel Americas: Europe, Middle East, Africa: Asia-Pacific: Represented by Bosch Communications Systems Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd 12000 Portland Avenue South P.O. Box 80002 11 Bishan Street 21 Burnsville, Minnesota 55337, USA 5600 JB Eindhoven, The Netherlands Singapore 573943 Phone: +1-800-392-3497 Phone: + 31 40 2577 284 Phone: +65 6571 2600 Fax: +1-800-955-6831 Fax: +31 40 2577 330 Fax: +65 6571 2698 audiosupport@us.bosch.com emea.securitysystems@bosch.com apr.securitysystems@bosch.com www.boschsecurity.com www.boschsecurity.com www.boschsecurity.com © Bosch Security Systems Inc. 011 | Data subject to change without notice T1287851531 | Cur: en-US, V21, 27 Jan 2011