Datavideo SE-2800 user manual

.Digital Video Switcher.
SE-2800( 8 / 12 CHANNEL )
Instruction Manual
www.datavideo-tek.com

2
Contents
Warnings and Precautions................................................................................................5
Warranty .............................................................................................................................6
Disposal...........................................................................................................................................................6
Packing List.....................................................................................................................................................6
Product Overview ..............................................................................................................7
Features ..........................................................................................................................................................7
Connections & Controls....................................................................................................8
Control Panel Overview ..................................................................................................................................8
Main Unit - Rear Panel....................................................................................................................................8
Rear Panel Connections .................................................................................................................................9
Main Unit – Front Panel ................................................................................................................................10
HDMI Multi-view ...............................................................................................................11
How to change the Multi-view output ............................................................................................................11
Keyboard Controls – Video Switching ...........................................................................12
Program and Preset rows .............................................................................................................................12
BG .................................................................................................................................................................12
SPEED ..........................................................................................................................................................12
AUTO TAKE..................................................................................................................................................12
CUT ...............................................................................................................................................................12
FTB................................................................................................................................................................12
T-Bar .............................................................................................................................................................12
Keyboard Controls – Video Transitions.........................................................................13
Transition Selection.......................................................................................................................................13
INV ................................................................................................................................................................13
FIX / A+V.......................................................................................................................................................13
MIX ................................................................................................................................................................13
FREEZE ........................................................................................................................................................13
Transition Confirmation.................................................................................................................................13
Keyboard Controls – LOGO 1, LOGO 2, CLOCK and TIMER........................................14
LOGO 1.........................................................................................................................................................14
LOGO 2 or CLOCK .......................................................................................................................................14
TIMER ...........................................................................................................................................................14
Keyboard Controls – PIP1, PIP2, DSK1 and DSK2........................................................15
PIP Preset and PIP Program ........................................................................................................................15
Assigning a video source input to a PIP .......................................................................................................15
DSK Preset and DSK Program .....................................................................................................................15
Assigning an input to a DSK channel for keying...........................................................................................15
Keyboard Controls – Frame Store, AUX and Audio level.............................................16
FS – Frame Store Button ..............................................................................................................................16
How to choose live video input or Frame Store ............................................................................................16
AUX Source Selection...................................................................................................................................16
Audio Level....................................................................................................................................................16
Menu Options...................................................................................................................17
SE-2800 Video Layers......................................................................................................20

3
PIP – Picture In Picture function.....................................................................................21
PIP Settings...................................................................................................................................................21
PIP Preset and PIP Program ........................................................................................................................21
Assigning a video source input to a PIP .......................................................................................................21
DSK function (CG / LUMA KEY)......................................................................................22
DSK Settings.................................................................................................................................................22
DSK Preset and DSK Program .....................................................................................................................22
Assigning an input to a DSK channel for keying ...........................................................................................22
Example SE-2800 and CG-350 Set Up ........................................................................................................23
Switcher configuration using a computer – SEConfig software..................................24
Switcher tab...................................................................................................................................................25
Profiles.......................................................................................................................................................25
Settings tab ...................................................................................................................................................25
Input settings tab...........................................................................................................................................25
Multi screen window signs (labels) tab .........................................................................................................26
Still pictures (FS) tab.....................................................................................................................................26
Logos tab.......................................................................................................................................................26
Dynamic Logo tab .........................................................................................................................................27
Multi screen A tab .........................................................................................................................................27
Multi screen B+D tab.....................................................................................................................................27
Multi screen C+E tab.....................................................................................................................................27
Controlling the switcher with a computer – SE Remote software ...............................28
Software based Macro functions...................................................................................................................28
REC & PLAY functions..................................................................................................................................28
TIME function ................................................................................................................................................28
SET function..................................................................................................................................................28
AUDIO function ................................................................................................................29
Overview .......................................................................................................................................................29
Audio Menu Options – De-embedding SDI or HDMI audio ..........................................................................29
Audio Menu Options – Monitoring the audio levels.......................................................................................30
Audio Menu Options – Changing the audio input level.................................................................................31
Changing the audio output level....................................................................................................................31
GPI / GPO Connections ...................................................................................................32
SE-2800Tally Outputs ......................................................................................................33

4
How to update the SE-2800 Firmware ............................................................................34
How to Re-calibrate the SE-2800 T-Bar..........................................................................38
How to change the SE-2800 video standard..................................................................39
Example SE-2800 Set Up.................................................................................................43
Dimensions.......................................................................................................................43
Specification.....................................................................................................................44
Service and Support ........................................................................................................45
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to
give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this
manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the information in this document for
accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or
dealer.

5
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
slightly damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable surface, cart, stand, or table. The unit may fall, causing
serious damage.
6. Any slots and openings on the case top, back, and bottom are provided for ventilation. To ensure
safe and reliable operation of this unit, and to protect it from overheating, do not block or cover
these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation
openings may become blocked. This unit should never be placed near or over a heat source or
radiator. This unit should not be placed in a built-in installation unless proper ventilation is
provided.
7. This product should only be operated from the type of power source indicated on the marking
label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo
dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will
be walked on, rolled over, damaged or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on
the products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the case ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never
spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your warranty. Refer all service issues to
qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust
only those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the case has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

6
Warranty
Standard Warranty
 Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of
purchase.
 The original purchase invoice or other documentary evidence should be supplied at the time of any request
for repair under warranty.
 Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this
warranty.
 All mail or transportation costs including insurance are at the expense of the owner.
 All other claims of any nature are not covered.
 Cables & batteries are not covered under warranty.
 Warranty only valid within the country or region of purchase.
 Your statutory rights are not affected.
Two Year Warranty
 All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year extension to the standard
Warranty, providing the product is registered with Datavideo within 30 days of purchase. For information on
how to register please visit www.datavideo-tek.com or contact your local Datavideo office or authorized
Distributors.
 Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only
covered for the first 10,000 hours, or 1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors
before the extended warranty expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it should not be treated as household waste. It must
be handed over to the applicable take-back scheme for the recycling of Waste Electrical and
Electronic Equipment. For more detailed information about the recycling of this product, please
contact your local Datavideo office.
Packing List
Item Description Quantity
1 SE-2800 Main Unit 1
2 SE-2800 Keyboard/Control Panel 1
3 Switching Adaptor DC 12V / 5A XLR 1
4 AC power cord 1
5 DB 9P(F) to DB 9P(F) Cable Length:1.5m 1
6 PVC Mylar ( Wipe Function ) 1
7 PVC Mylar ( Wipe Function ) 1
8 SE-2800 Instruction Manual 1

7
Product Overview
The SE-2800 is a cost effective HD/SD switcher featuring 8* or 12 channels. Thanks to a 2RU 19” form factor and
12V DC input the SE-2800 is ideal for use in portable rack units or outside broadcast vehicles. The SE-2800
produces superb 10 bit 4:2:2 broadcast quality pictures while also offering flexible input and output configurations.
The SE-2800 also has powerful, easy to use effects, such as dual picture in picture (PIP), downstream keyers
(DSK) and logo insertion, as well as a clock and multiple still image frame stores.
The SE-2800 has been designed for live productions such as concerts, conference, sports and worship events as
well as news and studio based programmes that may need to combine a number of video sources with a mixed
audio feed. The unit can also be configured and controlled over an Ethernet network allowing even greater
flexibility and even more user set up options.
That’s Datavideo, sharing the value!
*Eight channel units can be upgraded to twelve at a later date – Please speak with your dealer for more information.
Features
 A flexible variety of input choices. The twelve input version can be configured as:
Twelve SDI or HD-SDI inputs,
Or Nine SDI or HD-SDI inputs with three HDMI inputs,
Or Six composite inputs, with three SDI inputs and three HDMI inputs
Or Six composite inputs, with six SDI inputs.
The eight input version* can be configured as:
Eight SDI or HD-SDI inputs,
Or Six SDI or HD-SDI inputs with two HDMI inputs,
Or Four composite inputs, with two SDI inputs and two HDMI inputs
Or Four composite inputs, with four SDI inputs.
 HDMI based single or dual screen multi-view outputs.
A choice from five set ups, two with optional HDMI Program output.
 Three user defined SDI or HD-SDI outputs.
Each of these outputs has the option to be:
Program output
Or Preview output
Or Program output without logo
Or Program output without logo and DSK overlay
Or Aux output of a selected video input channel (single Aux).
 User defined and positioned dual picture in picture (PIP).
 Easy two step PIP source assignment using keyboard.
 Two downstream keyers (DSK) with a set up choice of basic Luma key or alpha channel.
 Easy two step DSK source assignment using keyboard.
 User choice from seven stored logos for insertion on preview and program outputs.
 One dynamic logo or moving image sequence. File type can be TGA, GIF or AVI up to 75 frames long.
 Frame Store (FS) source for each input channel. User can quickly toggle between a pre-loaded still image
and the connected live source.
 On screen real-time clock featuring HH:MM only – User defined position.
 User defined countdown timer for each input shown within the HDMI Multi-view output.
 Six user defined wipe buttons - choice of 16 wipes with optional border.
 User can define three speed buttons (in frames) for selected transition when using Auto Take button.
 T-Bar can be operated in one way or two way mode.
 Choice of 8 full raster colour backgrounds or SMPTE 75% bars for BG button.
 Up to four channels of audio can be embedded on to the SDI and HDMI Program outputs. Either from an
external audio mixer (not supplied) or selected HDMI, SDI and analogue XLR inputs.
 Audio peak meters displayed on HDMI Multi-view gives confidence of incoming and outgoing audio.
 User choice for synch input and loop through – composite black & burst or HD Tri-Level sync.
 SE-2800 can be configured over an Ethernet network using a supplied Windows 7 PC application.
 SE-2800 can be controlled remotely over an Ethernet network using a supplied Windows 7 PC application.
 Low voltage Bi-colour Tally output on a single 25pin D-sub connector – compatible with other Datavideo
equipment or bespoke applications.
 GPI - Externally trigger transitions or devices using the 3.5mm jack socket.
 XLR 12V DC input – Makes the unit ideal for studio or OB van based applications.

8
Connections & Controls
Control Panel Overview
1. Frame Store button 8. Speed Selection
2. Audio Level buttons 9. AUTO TAKE
3. PC / Menu control 10. FTB – Fade To Black
4. Transition selection 11. CUT
5. Logos 1 & 2, Clock & Timer 12. T-Bar – Manual Transitions
6. PIP selection PST & PGM 13. Preset Row (PST)
7. DSK selection PST & PGM 14. Program Row (PGM)
Main Unit - Rear Panel
1. Input 1 – SD / HD-SDI / CVBS 13. Sync Output
2. Input 2 – SD / HD-SDI / CVBS 14. External Sync Input
3. Input 3 – SD / HD-SDI 15. User Defined Outputs 1~3
4. Input 4 – SD / HD-SDI / HDMI 16. Connect the SE-2800 keyboard here
5. Input 5 – SD / HD-SDI / CVBS 17. User Defined Multi Image Outputs
6. Input 6 – SD / HD-SDI / CVBS 18. Ethernet port for PC control & updates
7. Input 7 – SD / HD-SDI 19. Tally Output connector
8. Input 8 – SD / HD-SDI / HDMI 20. GPI connector
** 9. Input 9 – SD / HD-SDI / CVBS 21. RS-232 connector (not currently used)
** 10. Input10 – SD / HD-SDI / CVBS 22. 4pin XLR Power Input connector
** 11. Input11 – SD / HD-SDI 23. Grounding Terminal
** 12. Input12 – SD / HD-SDI / HDMI 24. 3pin XLR Audio Inputs
25. 3pin XLR Audio Outputs
** Please note inputs 9 to 12 are not present if you have purchased the eight channel SE-2800.
Eight channel units can be upgraded to twelve inputs, please talk with your local dealer.

9
Rear Panel Connections
SD Inputs
CVBS
BNC
SDI
BNC
HDMI
1, 5 & 9 Yes Yes ---
2, 6 & 10 Yes Yes ---
3, 7 & 11 --- Yes ---
4, 8 & 12 --- Yes Yes
1920x1080
HD Inputs
HD-SDI
BNC
HDMI
1, 5 & 9 Yes ---
2, 6 & 10 Yes ---
3, 7 & 11 Yes ---
4, 8 & 12 Yes Yes
Video Input Modules
The SE-2800 can be supplied with eight or twelve video input
channels.
An SE-2800 with eight input channels has two video input modules
fitted. An SE-2800 with twelve input channels has three video input
modules fitted. An eight channel unit can be upgraded to twelve
inputs by adding another Video Input Module.
There are four video input channels on each Video Input Module.
Each Video Input Module (shown top left) has the same
connections, four BNC connectors and one HDMI port. The fourth
BNC connector and the HDMI port are an option for the same input
channel.
The two tables, on the left, show which types of video inputs can be
connected to the SE-2800 switcher. For example, only input
channels 4, 8 and 12 have the HDMI input option.
NOTE: The switcher cannot accept 1280x720 or 1440x1080 inputs
and has no input scaling options.
SYNC I/O
The SE-2800 can be synchronised with other studio equipment such
as cameras and House sync. Input BNC (14) will accept House sync
or Tri-level sync. Output BNC (13) can be used to pass the sync
signal to other studio equipment such as cameras or recorders.
CONSOLE
This 9pin D-Sub connector (16) is used to connect the Control Panel
/ Keyboard to the rear of the SE-2800 Main Processing unit.
HDMI MULTIVIEW OUT
The SE-2800 has two HDMI outputs (17) which can be used to
display a preset combination of inputs plus program and preset. See
page 11 for the five preset multi-view options.
SDI VIDEO OUTPUTS
The three BNC output connectors (15) are user defined SDI outputs.
Each of these SDI outputs has the option to be:
1. Program output
2. Preview output
3. Program output without logo
4. Program output without logo and DSK subtitles
5. Aux output of a selected video input channel
SDI outputs 2 and 3 also have the option to be a Program output
which has been downscaled from HD to SD resolution.
ETHERNET PORT
This RJ45 Ethernet port (18) is used to connect the SE-2800 to a
PC for remote control, or to update the unit’s firmware, or to
configure the switcher. See page 24 for more details.

10
AUDIO OUT
Supports two channels XLR Balanced Audio output.
See page 29 for more details.
AUDIO IN
Supports four channels XLR Balanced Audio Input.
See page 29 for more details.
TALLY OUT
The SE-2800 Tally Output port provides bi-colour tally information
to a number of other Datavideo products, such as the ITC-100
eight channel talkback system or the Datavideo TLM range of
monitors. See page 33 for more details.
GPI
The GPI socket can be used for simple external control. See page
32 for more details.
RS-232 REMOTE
This feature is not currently active. A firmware update may be
released at a later date. Please check with your local Datavideo
office for advice on this connection and the latest firmware.
DC IN
Connect the supplied 12V 5A PSU to this 4pin XLR socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Grounding Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a cross-sectional area of at least 1.0 mm.
Main Unit – Front Panel
The front panel on the SE-2800 main unit has a grille for two airflow cooling fans. Please do not block or cover this
grille as the unit may overheat. This grille should also be kept free of dust. The front panel can be removed by
using the four thumbscrews. A soft brush or cloth can then be used to clean the grille before attaching it back to the
unit.
The power button starts and shuts down both the SE-2800 main unit and its attached keyboard.

11
HDMI Multi-view
SE-2800 Multi-view monitoring is available across one or two HDMI monitors (not supplied). These outputs can be
used to monitor video and audio in a number of different configurations. For each set up, embedded audio level
indication is available on all inputs and the Program window.
This Multi-view is supplied from the HDMI connection(s) on the rear panel. (See page 8, Rear Panel, item 17.)
When connected to two compatible HDMI monitors a variety of multi-image layouts is possible.
Configuration A:
- On HDMI screen 1: 9 live inputs
- On HDMI screen 2: 3 live inputs with additional Preview and Program windows
Configuration B:
- On HDMI screen 2: Program window
Configuration C:
- On HDMI screen 2: Program window
Configuration D:
- On HDMI screen 2: Same as HDMI screen 1
Configuration E:
- On HDMI screen 2: Same as HDMI screen 1
HDMI 1 HDMI 2 Shown left are the five multi-view configuration options A to E.
How to change the Multi-view output
To change the multi-view option on your switcher press the ENTER
button in the MENU area of the SE-2800 Control Panel / Keyboard.
This will display an on screen menu on HDMI output 1. Then use the
arrow down button to highlight the option Multi Screen Mode. Use
the arrow keys to highlight your preferred option from those
shown on the left. Use the arrow keys to place a tick in the selection
box and then press ENTER to save this choice.
On screen Tally indication
The SE-2800 Multi-Image Preview supplies basic tally information
by highlighting the live Program input source with a red border, and
the cued next input source with a yellow border.
Function Area
Below the Program and Preset image windows is a function area
occupied by a real time Clock, Countdown Timer (if active), chosen
Wipe indicator, PC or Console control indication and chosen Audio
mix and Audio level indicators.
Labels
Below each video input channel window there is a label. These
labels can be edited using the software supplied with the SE-2800,
see page 24 for more details.

12
Keyboard Controls – Video Switching
Program and Preset rows
The Program row of buttons is the active channel, this is the live output. The active channel will appear as the
Program Output (PGM). You can switch or CUT from one video source to another directly on the Program row. You
will see the multi view PGM output change as you press different keys along this top row of buttons.
The Preset row is the cued channel, this channel will appear in the PST or Preview window. The Preset row
selection decides which input will be transitioned to next when using any of the transition controls.
N.B. The keys on the Program and Preset rows will be inactive while the T-Bar is active or moving. Only
when the T-Bar is fully up or fully down will the keys respond.
BG
Background button – assigns a background colour or SMPTE 75% bars for use on the Program and Preset row.
SPEED
There are three speed buttons which can be defined by the user. By
pressing a speed button the user is choosing the rate of transition or time
taken when using the AUTO TAKE button.
AUTO TAKE
This performs an automated switch from the current program source to
the selected preset source. The selected transition wipe or dissolve will
also be used. The timing of the transition is set by the chosen Speed
button.
CUT
This performs a simple immediate switch from the current main source to
the selected sub source. The selected transition wipe or dissolve is not
used.
FTB
Fade To Black, this button fades the current video program source to
black. When pressed again it acts in reverse from complete black to the
currently selected program video source.
T-Bar
This performs a manually controlled transition from the current program
source to the selected preset source. The selected transition wipe or
dissolve will be used. When the T-Bar has travelled as far as it can go the
transition between sources is complete. The T-Bar has indicators next to
it which light when the transition is complete.
The T-Bar can be operated in one of two modes which is chosen by a
menu option, see page 17 onwards for more details.

13
Keyboard Controls – Video Transitions
Transition Selection
The SE-2800 features six user defined wipe buttons, an
A/B dissolve or MIX button, an INV or Invert wipes button
and a FREEZE button.
All wipes can have an optional colour border applied. The
wipe border width and colour are chosen within the menu
system.
Transitions can be performed manually using the T-Bar or
automatically by using the SPEED and AUTO TAKE
buttons.
Vertical Wipe Left to Right. Vertical Wipe Right to Left.
Horizontal Wipe Bottom to Top. Horizontal Wipe Top to Bottom.
Vertical Wipes from Centre to Left
and Right sides.
Vertical Wipes from Left and Right
sides to Centre.
Horizontal Wipes from Centre to
Top and Bottom.
Horizontal Wipes from Top and Bottom
to Centre.
Circle Wipe from Centre to
outside edges.
Circle Wipe from outside edges to
Centre.
Diamond Wipe from Centre to
outside edges.
Diamond Wipe from outside edges to
Centre.
Box Wipe from Centre to outside
edges.
Box Wipe from outside edges to
Centre.
Diagonal wipe from upper left to
lower right.
Diagonal wipe from lower right to
upper left.
INV
Invert the selected wipe so it travels in the
opposite direction.
FIX / A+V
Switch the audio mixing selection between
Audio Fixed and Audio-F-Video (A+V).
MIX
Pressing this button selects a basic A/B
Dissolve for the next transition.
FREEZE
Freeze the program source image or return to
live video of the selected program source.
Transition Confirmation
The selected transition is highlighted in the status
area of the HDMI multi-view output. When the INV
button is pressed the six wipe icons change to their
opposite direction icon.

14
Keyboard Controls – LOGO 1, LOGO 2, CLOCK and TIMER
The SE-2800 has the ability to store six static logos and one dynamic logo. The
logo files are transferred to the SE-2800 from a Windows PC using the Ethernet
connection and the supplied SEConfig software. See page 24 for more details
on using this software.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-selected logos on the
SE-2800 Preset and Program outputs. When the button is active the selected
logo is shown. These logos are selected from the switcher’s memory and
positioned using a menu option see page 17 for details.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same time. Instead use
LOGO 1 and CLOCK together or use LOGO 1 and LOGO 2 together.
The clock time can be synchronised with a computer or set manually using a
menu option. The colour and font used in the clock digits can be changed using
the supplied SEConfig software. See page 24 for more details on using this
software or see page 17 onwards for the Clock menu options.
TIMER
In some mixing or switching applications it is useful to have a countdown timer. It
could be that the input is a pre-recorded video clip and you need to know when
to be ready to switch away from it.
This countdown timer function is only seen in the status area of the HDMI multi-
view output to the right of the normal Clock function. The timer can be selected
for one input channel, several channels or all channels.
When the TIMER button is active and the user switches to a selected input
channel the countdown starts on the HDMI multi-view.
The value of the countdown, in minutes and seconds (MM:SS), is set by a menu
option. Whilst the countdown is in progress T-Bar operation is ignored.
When the countdown reaches zero the user can then switch or transition to
another input channel. If the countdown reaches zero the switcher will not
automatically change to the selected Preset source.

15
Keyboard Controls – PIP1, PIP2, DSK1 and DSK2
PIP Preset and PIP Program
When looking at the top right corner of the SE-2800 Control Panel / Keyboard
there are four PIP keys. These are labelled Program and Preset. The upper
PIP1 and PIP2 keys relate to activating Picture In Picture images on the
Program outputs. The lower PIP1 and PIP2 keys relate to activating Picture In
Picture images on the Multi-view or Preview outputs.
Assigning a video source input to a PIP
Using the lower PIP1 or PIP2 buttons you can assign a selected video input to
the chosen PIP video layer.
1) First press and hold down the required PIP button on the lower row. The
Preset row of input sources will light.
2) While still holding down the PIP button, press to select the required input
from the Preset row.
3) The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a P1 or P2
label shown next to the selected input image.
The full PIP process is described on page 21.
DSK Preset and DSK Program
there are four DSK keys. These are labelled Program and Preset. The upper
DSK1 and DSK2 keys relate to activating Down Stream Keying on the Program
outputs. The lower DSK1 and DSK2 keys relate to activating Down Stream
Keying on the Multi-view or Preview outputs.
Assigning an input to a DSK channel for keying
Using the lower DSK1 or DSK2 buttons you can assign a selected video input to
the chosen DSK video layer.
1. First press and hold down the required DSK button on the lower row. The
2. While still holding down the DSK button, press to select the required input
3. The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a T1 or T2
The full DSK process is described on page 22.

16
Keyboard Controls – Frame Store, AUX and Audio level
FS – Frame Store Button
The SE-2800 has eight or twelve video channels, depending on the number of
inputs it has. Each of these channels has its own Frame Store, making a total of
eight or twelve Frame Stores. Each of these Frame Stores can hold one still
image. This still image can be called into the production by using the FS button
located at the top left corner of the SE-2800 Control Panel / Keyboard. The FS
button allows the user to toggle between the still image of the Frame Store or
the live video input also connected to that same video channel.
How to choose live video input or Frame Store
1. First press and hold down the FS button. The Preset row of input sources
will light.
2. While still holding down the FS button, press the required input on the
Preset row.
3. The input button will flash to confirm the Frame Store is selected.
This selection will also be confirmed on the HDMI Multi-view, with the selected
channel showing the live input or frame store image.
The contents of each Frame Store is uploaded to the SE-2800 from a PC. The
supplied SEConfig software is used to do this. The file upload process is
described on page 24.
AUX Source Selection
The SE-2800 has three user defined SDI outputs, see page 9 item 15. One or all
of these outputs can be set up as an auxiliary (AUX) output via a menu option.
See page 17 onwards for details.
The AUX output source can be quickly selected in the following way.
1. First press and hold down the AUX button. The Preset row of input sources
will light.
2. While still holding down the AUX button, press the required input on the
Preset row.
3. The input button will flash to confirm the AUX source is selected.
This selection will also be confirmed by the SD/HD-SDI Monitor supplied with
these AUX images.
Audio Level
The SE-2800 has ability to do a basic mix/switch of analogue, SDI and HDMI
embedded audio, see page 29 for details.
The AUDIO LEVEL buttons are related to the level of the Program audio output,
whether SDI embedded or analogue XLR.

17
Menu Options
When the ENTER button is pressed the Main Menu list is displayed on the
HDMI 1 Multi-view output.
This section covers the Menu options in the order that they appear on the
SE-2800 HDMI 1 Multi-view. These settings may also appear in more detail
elsewhere in this instruction manual. Options may vary depending on the
firmware version in use.
Once the chosen setting has been confirmed with the ENTER button it is
stored within the switchers non-volatile memory.
Version Number v01.66 (NTSC) v02.51 (PAL)
Input Video Settings
Brightness
Contrast
Saturation
Aperture
Y-C Delay
Set To Nominal
Range xx to xx
Range xx to xx
Range xx to xx
Not used in current firmware
Not used in current firmware
Reset to default values
Inputs Standard and Format
Inputs 1,2,5,6,9 &10 Can be a choice of HD SDI*
SD SDI 4:3
SD SDI 16:9
CVBS 4:3
CVBS 16:9
Inputs 3,7 &11 Can be a choice of HD SDI*
SD SDI 4:3
SD SDI 16:9
Inputs 4,8 &12 Can be a choice of HD SDI*
SD SDI 4:3
SD SDI 16:9
or
HDMI*
HDMI SD 4:3
HDMI SD 16:9
*All HD inputs are natively 16:9 aspect.
Input Audio Settings
Level
Nominal
Range -60 to +60
Resets value to zero
SDI Embedded Audio Set. Inputs 1 to 12 User choice of
Group 1,2,3 or 4
Pair 1 or 2
HDMI in Embedded Audio Pair Input 4,8 or 12 User choice of Group 1,2,3 or 4
Outputs Emb Audio Group Outputs 1,2 or 3 User choice of Group 1,2,3 or 4
Auto Audio Mixing Type User choice of
X type or V type
Tick selection
X type = A/B cross fade
V type = Fade out A then Fade in B
T-Bar Audio Mixing Type Tick selection of
Follow auto audio mixing type
By the end

18
PIP Settings
Position PIP1
Size PIP1
Border PIP1
Position PIP2
Size PIP2
Border PIP2
X-Position (Left to right) = 000 to 097
Y-Position (Lower to Upper) = 000 to 108
PIP Size = 1 (small) to 33 (large)
Border Size = 0 (OFF), 1 (Thin) to 15 (Thick)
Border Color = 1 to 8 (user defined colours)
1=Yellow, 2=Cyan, 3=Green, 4=Magenta, 5=Red, 6=Blue
LOGO Settings
Logo1
Logo2
Selection = 1 to 8
Logo selection 1 to 7 are still image
Logo 8 selection is dynamic moving image
Speed Buttons Setting
Speed1
Speed2
Speed3
Range 1 to 127 (Frames)
Wipe Buttons Setting Buttons 1 to 6
Wipe 1 to 8 (See page 13 also)
Soft Edge 0 to 4
Color 1 to 8
Outputs Mode
OUT 1 is an HD SDI only user choice of Program
Program Logo Free
Program Logo & Titles Free
Preview
Aux
OUT 2 user choice of Standard & Format HD SDI
SD SDI 4:3
SD SDI 16:9
Plus MODE choice of Program
Program Logo Free
Program Logo & Titles Free
Preview
Aux
OUT 3 has the same user choices as OUT 2
DSK Settings
Titles 1
Titles 2
Titles + a-CH mode (alpha channel)
Luma Key mode
Luma Key Level 0 (black) to 255 (white)
BG Color Setting
User choice of Back Ground colour from 1 to 9
1=White, 2=Yellow, 3=Cyan, 4=Green, 5=Magenta, 6=Red, 7=Blue, 8=Black
9 = SMPTE 75% colour bars

19
T-Bar Mode
One Way Mode
Two Way Mode
= T-Bar operates transition in only one direction
= T-Bar operates transition in both directions
1kHz to Bars
When BG Color Setting option above = 9
1kHz tone can be ON or OFF depending on tick selection
Keys Brightness
User choice of 1 to 4
Brightness of keyboard buttons, 1= Low, 4= High
Keys Mode Tick selection ON or OFF, ON=Active buttons are Red, OFF=Green is Active
Audio Level is shown Tick selection ON or OFF, ON=Audio Peak Meters shown on HDMI Multi-view
Reference
External Tick selection for ON or OFF
Mode Choice of HD Analog 3 Level Signal
Or SD Composite PAL/NTSC
H-Timing Zero to 15
Aux
The value shown here relates to the selected input – See page 16 also.
This setting is also related to the Outputs Mode on page 18.
Factory Settings Tick selection ON or OFF, ON= Reset all settings to their default values.
Clock Settings
Set Hours
Set Minutes
Clear Seconds
Multi Screen Mode
This selection relates to the HDMI outputs 1 (=W1) and 2 (=W2).
A : W1 = PGM + PVW + 3 IN ; W2 = 9 IN
B : W1 = PGM + PVW + 12 IN ; W2 = PGM
C : W1 = PGM + PVW + 8 IN ; W2 = PGM
D : W1 = PGM + PVW + 12 IN ; W2 = W1
E : W1 = PGM + PVW + 8 IN ; W2 = W1
See page 11 also.
GPI Settings
Input Select = Chosen input number
Time Delay = In frames between 1 to 75
Countdown Timer Settings
Each input can selected for Count Down ON or OFF.
If Count Down is ON then the Down Counter value is set in minutes and
seconds (MM:SS) - Max.= 1 Hour or 60:00, Default = 15 Seconds or 00:15
Audio Associations
Input channels 1-12, Value 1-12
( used to choose an embedded audio source – see page 29 for more details )
Multi Screen Audio Tick selection of Program or Preview audio on the HDMI outputs.

20
SE-2800 Video Layers
The SE-2800 is a Standard Definition or High Definition Digital Video Switcher and as well as mixing video and
audio sources it has additional functions such as Picture In Picture (PIP), DSK LUMA KEY and LOGOs.
Before attempting to use the SE-2800’s PIP, DSK LUMA KEY and LOGO functions it may help to first understand
the order of the video layers at the SE-2800 Program (PGM) outputs.
The Background video layer is the normal video layer when mixing and switching with the SE-2800. It occupies
the whole screen area of the Program output. This layer can be hidden or part hidden by the PIP, DSK and LOGO
layers in front of it.
The PIP 1 layer does not occupy the whole screen and is shown in front of the Background video layer when
enabled. In some setups the PIP 1 image can be hidden behind the PIP 2 image. This is not a fault. Change the
position or size of the PIP 1 or PIP 2 image if required.
The PIP 2 layer does not occupy the whole screen and is shown in front of the Background video and PIP 1 layers
when enabled. In some setups the PIP 1 image can hide the PIP 2 image. Change the position or size of the PIP 2
or PIP 1 image if required.
The DSK 1 layer can occupy the whole screen. If set up incorrectly this layer can stop the video layers behind it
from being seen properly. Re-adjust your DSK 1 settings or switch off the DSK1 function on the SE-2800 to restore
the video behind it.
The DSK 2 layer can occupy the whole screen. If set up incorrectly this layer can stop the video layers behind it
from being seen properly. Re-adjust your DSK 2 settings or switch off the DSK1 function on the SE-2800 to restore
the video behind it.
The LOGO and Clock layer does not occupy the whole screen and all other layers are visible through it. A logo if
positioned incorrectly can partially hide an important part of the video, PIP or CG LUMA KEY layers. Typically logos
or station ID bugs are placed in a corner of the screen.
NB: Where possible prepare and position the upper video layer elements in advance of the live production starting
to avoid them appearing on the program output incorrectly.
Most broadcast networks have guidelines and advice on the use of video, images, music, logos and on screen text
so it is best to check beforehand when planning a production. Do not use copyright protected content until you
have the relevant permissions. Information on royalty free video, images and music is widely available, speak to
your local dealer or search for advice on the internet.

21
PIP – Picture In Picture function
The SE-2800 Picture in Picture function allows you to place one or two smaller PIP images over a chosen full size
background image. The smaller PIP images can be set to pre-defined sizes and positioned almost anywhere within
the Preview/Program screen area. These PIP windows can also have a coloured border applied, and can be
brought into the production with a default PIP dissolve transition.
PIP Settings
Before trying to activate the PIP function it is best to understand how to set up or choose the right options for your
production. Press the ENTER Key in the MENU area of the SE-2800 keyboard. Navigate to the PIP Settings
option using the down arrow key. The PIP menu options provided here are:
PIP Settings Position PIP1
Size PIP1
Border PIP1
Position PIP2
Size PIP2
Border PIP2
PIP Size = 1 (small) to 33 (large)
Border Size = 0 (OFF), 1 (Thin) to 15 (Thick)
Border Color = 1 to 8 (user defined colours)
PIP Preset and PIP Program
there are four PIP keys. These are labelled Program and Preset.
The upper PIP1 and PIP2 keys relate to activating Picture In Picture images on
the Program outputs.
The lower PIP1 and PIP2 keys relate to activating Picture In Picture images on
the Multi-view or Preview outputs.
Assigning a video source input to a PIP
Using the lower PIP1 or PIP2 buttons you can assign a selected video input to
the chosen PIP video layer.
1) First press and hold down the required PIP button on the lower row. The
2) While still holding down the PIP button, press to select the required input
3) The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a P1 or P2

22
DSK function (CG / LUMA KEY)
The SE-2800 has two Down Stream Keyers (DSK1, DSK2). This means it is able to take a key source video input
and replace the white or black parts of this image with the video from another source. If the input video carries an
alpha channel it is also possible to key in this way too.
DSK Settings
Before trying to activate the DSK function it is best to understand how to set up or choose the right options for your
production well in advance of the production.
Press the ENTER Key in the MENU area of the SE-2800 keyboard. Navigate to the DSK Settings option using the
down arrow key. The DSK menu options provided here are:
DSK Settings Titles 1 (DSK1)
Titles 2 (DSK2)
Titles + a-CH mode (alpha channel mode)
Luma Key mode
Luma Key Level 0 (black) to 255 (white)
DSK Preset and DSK Program
there are four DSK keys. These are labelled Program and Preset.
The upper DSK1 and DSK2 keys relate to activating Down Stream Keying on
the Program outputs.
The lower DSK1 and DSK2 keys relate to activating Down Stream Keying on
the Multi-view or Preview outputs.
Assigning an input to a DSK channel for keying
Using the lower DSK1 or DSK2 buttons you can assign a selected video input to
the chosen DSK video layer.
1. First press and hold down the required DSK button on the lower row. The
2. While still holding down the DSK button, press to select the required input
3. The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a T1 or T2

23
Example SE-2800 and CG-350 Set Up
An example set up for the DSK1 and DSK2 feature would be to supply separate HD-SDI Key and Fill signals from
a Datavideo CG-350 Character Generator PC. This PC can provide CG overlays of text and graphics from the
outputs of a 3
rd
party PCIe video card such as Blackmagic Design’s Decklink HD Extreme 3D+ card.
1. Ensure the CG-350 software is set up for External key in its settings.
2. The Key signal from the Decklink card is then fed to input 9 on the SE-2800 (see diagram below). Press and
hold down the DSK1 button on the lower row. The Preset row of input sources will light, choose input 9. The
input will flash to confirm it is selected. This selection will also be confirmed on the HDMI Multi-view, with a T1
shown next to the selected input image.
3. The Fill signal from the Decklink card is then fed to input 10 on the SE-2800 (see diagram below).
4. Now go into the multi-view menu by pressing ENTER on the SE-2800 keyboard. Navigate to DSK SETTINGS
> TITLES 1 and choose TITLES + a-CH MODE. The SE-2800 will automatically use inputs 9 and 10 as key
and fill.
If you have two CG-350 computers then the same steps can be used for DSK2 set up but using inputs 11, 12 and
the second CG-350 PC.
If you have an SE-2800 with only eight input channels, then you could set up a single key and fill DSK, using inputs
5 and 6. This leaves six other video input channels to work with.
If you have an SE-2800 with only eight input channels and need to use two DSKs then separate Luma key set ups
can be created using the instructions on page 22. This leaves six other video input channels to work with.

24
Switcher configuration using a computer – SEConfig software
It is possible to configure the SE-2800 with a Windows 7 computer using an Ethernet connection.
1. Switch off or shut down the SE-2800 and Computer in the normal way.
2. Connect the Ethernet cable between the SE-2800 rear panel and the Windows 7 Computer.
3. Turn on the Windows 7 Computer.
4. Install the supplied SEConfig software on to a Windows 7 Computer.
5. Double click the SEConfig DV icon to launch the application.
6. If you immediately get an error window, do not worry, click OK.
7. Now Press PC Control button so it is ON in the MENU area of the SE-2800 keyboard.
8. Select Ethernet to display the Computer’s IP Address. Click the Find button to find and display the
SE-2800 Switcher’s IP Address in the drop down list. The first three numbers in both IP addresses
should match. See below example.
9. Click Connect and additional function tabs will become available at the top of the application window.
These are; switcher, settings, input settings, multi screen window signs (source labels), still pictures,
logos, dynamic logo, multi screen A, multi screen B+D and multi screen C+E

25
Switcher tab
This first tab can be used to choose the method of
connection between the computer and the switcher. In
this case the SE-2800 is connected using selected
Ethernet IP addresses.
Note that the first three numbers in the IP addresses
of the switcher and computer should be the same.
The last number in each IP address should be unique.
If you are connecting for the first time you may be
asked by the computer to change the firewall setting
to allow this application to connect to the switcher.
Profiles
It is possible to store the current profile or settings of the switcher to your computer. This file can then be restored
to the machine at a later date allowing simple configuration of the unit. Depending on the included levels of the
profile this save process may need some time to complete.
Settings tab
The settings tab is another way to change the menu
settings of the switcher. The options may appear in a
slightly different order to those in the onscreen menu
described on page 17.
Each menu option can be expanded by clicking on the
plus sign in the left hand pane. The right hand pane
shows any values which can be changed.
Input settings tab
The Input settings tab allows each input to be
configured from the computer.
Note due to the design of the switcher different inputs
may have more or less options as they are not all the
same. See page 9, Video Input Module.
Each menu option can be expanded by clicking on the
plus sign in the left hand pane. The right hand pane
shows any values which can be changed.

26
Multi screen window signs (labels) tab
This tab allows the user to rename the input source
labels on the HDMI multi view.
The READ button can be used to load the current label
of a selected input into the application window on the
left.
This selected label can then be edited using the TEXT
box. If required the font and colour of the text can also
be changed.
The WRITE button can then be used to write the new
label text into the switcher’s memory.
Still pictures (FS) tab
Each switcher has the ability to store still pictures in its
frame stores. If the switcher has eight inputs it has the
ability to store eight still pictures. Twelve pictures can
be stored if the unit has twelve inputs.
See FS button on page 16 also.
The LOAD button can used to browse for a picture
stored on the computer. This picture is then loaded into
the application window.
The WRITE button can then be used to save the new
picture into a selected frame store on the switcher.
Logos tab
The SE-2800 can store up to seven still logos in its
memory.
Using the logos tab you can use the LOAD button to
browse for a logo stored on the computer. This logo is
then loaded into the application window.
logo into a selected logo store on the switcher.

27
Dynamic Logo tab
The SE-2800 can store one dynamic moving logo in its
memory. The dynamic logo can be a targa (TGA)
sequence, GIF or AVI. It must be no longer than 75
frames/images long.
Using the Dynamic logo tab you can use the LOAD
button to browse for a logo sequence of images stored
on the computer. This logo sequence is then loaded
into the application window.
logo sequence into the dynamic logo store on the
switcher.
Multi screen A tab
Multi screen B+D tab
Multi screen C+E tab
These three tabs are used to write new Multi screen layouts to the switcher in order to change the HDMI multi-view
layouts as described on page 11.
NOTE: Only change these layouts with guidance from your local Datavideo office as attempting to edit or load your
own layouts may result in a poor outcome or a non-responsive switcher.

28
Controlling the switcher with a computer – SE Remote software
It is possible to control the SE-2800 with a Windows 7 computer using an Ethernet connection. The SE Remote
software supplied with the switcher needs to be installed on the computer first. The SE-2800 then needs to be
placed into PC Control mode. To do this press the PC Control button on the SE-2800 Control Panel. Once
launched the Remote software displays an image of the SE-2800’s keyboard as shown below. Any active functions
or selections will be shown with a red button or key. These buttons or keys can be clicked with a mouse or
alternatively you could use a touch screen monitor.
Software based Macro functions
It is possible to record a Macro type playlist to the computer when using the SE Remote software. This Macro
function allows these pre-recorded keyboard actions or selections to be played back within a project where timing is
important or where the same steps are repeated throughout the production. The Macro function buttons are REC,
and PLAY. These buttons are located just above the T-Bar in the SE Remote display above.
REC & PLAY functions
Left mouse click the grey REC button and it will light up red. All of your actions when using the Remote Console will
now be recorded to file. The only action that will not be recorded is the T-Bar, use the CUT or AUTO TAKE buttons
instead. The function buttons just above the T-Bar as listed on this page are also ignored.
Click the red REC button again and a save window will appear. You can now save the recorded actions as a macro
text file to a chosen location on the computer.
Click the grey PLAY button and a load file window will appear. You can now browse to and load a macro text file.
When you load a file the recorded actions will begin to play back until the end of the file.
TIME function
Mouse clicking on this button will synchronize the time on the switcher to the current time on the computer.
SET function
Used to set up the IP address of the connected switcher.
If unknown, the switcher’s IP address may be found by
using the SEConfig software first. The Find button within
the SEConfig software will help confirm the IP address of
the switcher.
NOTE: It is not possible to run the SEConfig and Remote software applications at the same time.

29
AUDIO function
Overview
The SE-2800 has a simple, cost effective, audio switcher built in. The SE-2800 has the ability to take audio from
several sources either XLR analogue, SDI and/or HDMI inputs. The audio can be embedded onto the HDMI and
SDI outputs and/or fed to the analogue XLR audio connections.
When using the audio functions of the SE-2800 switcher you may de-embed audio from selected SDI or HDMI
inputs and then output this audio from the XLR outputs of the switcher to a separate audio mixer like the Datavideo
AM-100 audio mixer.
Once the audio is mixed externally with any microphones or audio sources it can then be fed back into the SE-2800
on the analogue XLR inputs. The SE-2800 can then embed this externally mixed audio on to the Program SDI and
HDMI outputs.
Audio Menu Options – De-embedding SDI or HDMI audio
Using the following SE-2800 menu options audio can be selected from the SDI or HDMI video inputs.
SDI Embedded Audio Set. Inputs 1 to 12 User choice of
Group 1,2,3 or 4
Pair 1 or 2
HDMI in Embedded Audio Pair Input 4,8 or 12 User choice of Group 1,2,3 or 4
As each SDI / HD-SDI source can have up to sixteen channels of audio, and HDMI eight channels, we need to
choose the audio channels with the options above and by the following reference tables.

30
SDI Embedded Audio
Group Stereo Pair Channel Number
Group 1 Stereo pair 1 left 1
right 2
Stereo pair 2 left 3
right 4
right 6
right 8
right 10
right 12
right 14
right 16
In some cases there may only be two channels of audio associated with the video: Group1, Stereo Pair 1.
HDMI Embedded Audio
Stereo Pair Channel Number
right 2
right 4
right 6
right 8
Audio Menu Options – Monitoring the audio levels
The SE-2800 can confirm the incoming audio levels by showing audio peak meters on the HDMI multi-view.
Audio Level is shown Tick selection ON or OFF
It is also possible to hear the preview or program audio from the multi-view HDMI outputs using the menu option
below.
Multi Screen Audio Tick selection of Program or Preview audio on the HDMI outputs.

31
Audio Menu Options – Changing the audio input level
The SE-2800 can change the incoming audio level on the video inputs by adjusting the following menu option.
Input Audio Settings
Level
Nominal
Range -60 to +60
Resets value to zero
The audio level can also be changed at the external audio mixer if one is used - see our example on page 29.
Changing the audio output level
The SE-2800 can change the program output audio levels by using the following keyboard buttons
The AUDIO LEVEL buttons are related to the level of the Program audio output,
whether SDI embedded or analogue XLR.
.
Working with a fixed or single audio source
Example 1:
We have two mono mics (channels 1 & 2) connected to a HD camera. These embedded audio channels are then
output from this camera, HD-SDI, to the SE-2800 switcher. If we want to only hear these two audio channels
regardless of the video channel used then we would set up the switcher in the following way.
Press the ENTER key in the MENU area of the SE-2800 keyboard to display the on screen menu on the HDMI 1
output.
Change the Audio Association settings in the menu system to show a value of 1 for each video input channel.
Press the ENTER key to store the audio values chosen for each video input.
Change the SDI Embedded Audio setting in the switcher’s menu system to show a value of Group 1 and Pair 1.
Now exit the menu by pressing any wipe key and look at the FIX / A+V button in the wipes area
of the keyboard.
Select the AUDIO FIXED status with this button when looking at the status area of the HDMI
multi-view. The button will be backlit red. The status area is located just below or near the
Preview image on the HDMI multi-view monitor.

32
Switching between different embedded audio sources
Example 2:
We have two mono mics each connected to a different HD camera. The embedded audio is then output from each
camera, HD-SDI, to the SE-2800 switcher. If we want to hear the audio from each camera as the video channels
are switched, audio follows video, then we would set up in the following way.
Press the ENTER key in the MENU area of the SE-2800 keyboard to display the on screen menu on the HDMI 1
output.
Change the Audio Association settings in the menu system to show a value of 1 for each video input channel that
is associated with audio input 1. Then change to a value of 2 each video input channel that is associated with audio
input 2. Press the ENTER key to store the audio values chosen for each video input.
Change the SDI Embedded Audio setting in the switcher’s menu system to show a value of Group 1 and Pair 1.
Now exit the menu by pressing any wipe key and look at the FIX / A+V button in the wipes area
of the keyboard.
Select the AUDIO-F-VIDEO status with this button when looking at the status area of the HDMI
multi-view. The button will be off. The status area is located just below or near the Preview image
on the HDMI multi-view monitor.
When switching between the video sources the audio sources will also change. We can choose how the audio will
change sources, whether it be a clean cut (immediate switch) or some sort of transitioned change (cross fade or
fade out & in). To do this we would need to set up with the following menu options.
Auto Audio Mixing Type User choice of
X type or V type
Tick selection
X type = A/B cross fade
V type = Fade out A then fade in B
T-Bar Audio Mixing Type Tick selection of
Follow auto audio mixing type (use above option)
By the end (clean cut or immediate audio switch)
GPI / GPO Connections
The SE-2800 can be controlled externally via a simple contact closure GPI (General Purpose Interface) switch.
This could be a push button, foot switch or any relay or any circuit that is able to provide a simple contact closure.
The GPI interface is a 3.5mm Jack Socket which is situated on the rear panel of the SE-2800. Contact closure
between the Outer and Inner contacts on the jack plug will trigger a user selected event. Power is supplied by the
SE-2800 and is less than 5V DC.
This GPI socket can also be used as a GPO socket to trigger record or playback events with other equipment such
as the Datavideo HDR-70 recorder.
SAFETY FIRST The cabling required needs to be designed specifically to connect the SE-2800 to the chosen
record or playback device as they are not all the same. The cabling required can be made by yourself or a
competent technician. Please speak with your Dealer or local Datavideo office to get further help and advice.

33
SE-2800Tally Outputs
The SE-2800 has a D-sub 25 pin female tally output port. These
connections provide bi-colour tally information to a number of other
Datavideo products, such as the ITC-100 eight channel talkback
system and the TLM range of LCD Monitors.
These ports are open collector ports and as such do not provide
power to tally light circuits.
Dielectric strength: Max. DC 24V
Current: Max. 50mA
The pin outputs are defined as follows:
Pin No. Signal name Input/Output Description of signal
1 Program 1 Open collector output Tally output of input video Program 1
13 GND Ground Ground
14 Preset 1 Open collector output Tally output of input video Preset 1

34
How to update the SE-2800 Firmware
From time to time Datavideo may release new firmware to fix reported bugs in the current SE-2800 firmware or to
add a new feature. Customers can update the SE-2800 firmware themselves if they wish or they can contact their
local dealer or reseller for assistance should they prefer this method.
This page describes the firmware update process for the complete unit, if you have all the items required it should
take approximately 1 hour 20 minutes total time to complete.
Once started the update process should not be interrupted in any way as this could result in a non-responsive
unit.
As well as a working SE-2800 you will need:
 The latest Firmware update file for the SE-2800.
This can be obtained from your local Datavideo office or dealer.
 The SE-2800 power supply.
 The SEConfig software supplied with the switcher.
 A Windows 7 computer with an Ethernet port.
 An Ethernet cable.
To update the SE-2800 firmware:
4. Unzip the firmware update folder to the Computer Desktop so the file within it is easy to locate.
5. Double click the firmware update icon to launch the Flash Update Utility.
6. Confirm the supported devices list says SE-2800 then click NEXT.

35
7. The following window will be displayed.
Select Device is connected via Ethernet then click NEXT.
You can now POWER ON the SE-2800 and it will be discovered by the Computer.
9. Select Automatically update the device to latest firmware version then click NEXT.

36
10. Click the Yes button to confirm you wish to perform the firmware update.
11. The update process will begin and two progress bars will be shown. The lower bar, Total Progress, will
take around 15 minutes to complete.
12. Once this process is complete close the application and power cycle the SE-2800.
13. When the SE-2800 has restarted. Install the SEConfig software on to the Computer.
14. Double click the SEConfig dv icon to launch the second part of the update process.

37
15. If you immediately get an error window, do not worry, click OK.
16. Now Press PC Control button so it is ON in the MENU area of the SE-2800 keyboard.
17. Select Ethernet to display the Computer’s IP Address. Click the Find button to find and display the
SE-2800 Switcher’s IP Address in the drop down list. The first three numbers in both IP addresses
should match. See below example.
18. Click Connect and then click Restore Factory Settings in the top right hand corner. The process will
take approximately 45 minutes to complete.
19. The next step will be to re-calibrate the SE-2800 T-Bar to get it working again.

38
How to Re-calibrate the SE-2800 T-Bar
After a firmware update of the switcher it will be necessary to re-calibrate the T-Bar to get it working correctly.
1. Move the T-Bar to its lowest position.
2. Power OFF the SE-2800 switcher.
3. Press and hold down button 1 on both the Program and Preset
rows of the switcher’s keyboard.
4. Power ON the SE-2800 switcher while still holding down the
buttons in step 3.
5. The switcher will start but the keyboard lights will remain dead except
for the T-Bar progress LEDs. When these LEDs flash ON and OFF
release the buttons from step 3.
6. Move the T-Bar to its highest position and then press the CUT
button.
7. Move the T-Bar back to its lowest position and then press the
AUTO TAKE button.
8. To exit the calibration procedure press the CLOCK button.
9. Ensure the TIMER button is OFF.
10. Test the T-Bar.
If necessary change the T-Bar Mode in the MENU options.

39
How to change the SE-2800 video standard
As well as a working SE-2800 you will need:
 The latest Firmware update file for the SE-2800.
This can be obtained from your local Datavideo office or dealer.
 The SE-2800 power supply.
 The SEConfig software supplied with the switcher.
 A Windows 7 computer with Ethernet port.
 An Ethernet cable.
To change the SE-2800 video standard:
4. Unzip the firmware update folder to the computer desktop so the file within it is easy to locate.
5. Double click the firmware update icon to launch the process.
6. Confirm the lower box says SE-2800 then click NEXT.

40
Select Device is connected via Ethernet then click NEXT.
You can now POWER ON the SE-2800 and it will be discovered by the Computer.
9. Select Manually select a firmware version then click NEXT.

41
1. Click the Yes button to confirm you wish to proceed.
The Video Standard can now be changed from 1080i 60 to 1080i 50 or vice versa.
13. You will now see which firmware elements are selected to be changed.
14. Click NEXT at the bottom of the flash update window.
Then click the Yes button to confirm you wish to proceed.
15. Wait for the update to progress.

42
16. Once the process is finished re-start the switcher by powering it off and back on again.
17. Check the resolution at the output now matches the desired 1080i 50 standard.
18. Check the T-Bar and other functions still operate correctly.

43
Example SE-2800 Set Up
Dimensions
All measurements in millimetres (mm).

44
Specification
( Below based on SE-2800 12 channel unit )
Inputs
• Maximum 12 inputs, can be configurable to
12 HD SDI, 12 SD SDI, 6 CVBS or 3 HDMI
• Possible combination, for example 10 HD SDI + 2 HDMI, or 3 HD SDI + 3 HDMI + 6 CVBS
Outputs
• 3 BNC output connectors for SDI Outputs
• 2 HDMI for Multiscreen
• RJ-45 for PC Remote controls
• 2 BNC for Sync-In and Sync-Out
• DB-9 for Console
Video Input
• HD/SDI: 1920 x 1080i/50, 1920 x 1080i/60
• SD: PAL 720 x 576 /50Hz
• SD: NTSC 720 x 480 /59.9Hz
• SD: NTSC 7.5 IRE (US standard)/ 0 IRE (Japan standard) options
• HDMI 1920 x 1080i/50
• HDMI 1920x1080i/60Hz
• HDMI 720 x 576 /50Hz
• HDMI 720x480i/60Hz
• Y:Cb:Cr, 4:2:2 10 bit
Preview Outputs
• 2x HDMI output
• Way 1:
HDMI 1 Multiscreen1: 9 smaller windows for inputs 1-9 with embedded audio level
indication (group1, channel 1)
HDMI 2 Multiscreen2: 3 smaller windows for inputs 10-12 with embedded audio level
indication (group1, channel 1) + 2 bigger windows for Preview + Program,
embedded audio level indication for Program (group1, channel 1)
• Way 2:
HDMI 1 Multiscreen1- 12 smaller windows for inputs 1-12 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
HDMI 2 Multiscreen2 : Program, Multiscreen 1
• Way 3:
HDMI 1 Multiscreen1- 8 smaller windows for inputs 1-8 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
HDMI 2 Multiscreen 2 : Program, Multiscreen 1
• Resolution is 1920x1080i
Other Interface
• Serial D-Sub 9 Pin x 1 RS232
• Tally Output D-Sub 25 Pin x 12 Channel Open Collector Output
• Support Line and MIC mode
• GPI port
HD SDI signal
SMPTE 292M standard complied with
• Output return loss : More than 15 dB (5MHz to 750MHz)
More than 10 dB (750MHz to 1.5 GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 270 ps
• Fall time : Less than 270 ps
• Difference between rise time and fall time within 100 ps
• Alignment jitter : Less than 0.2 UI
• Timing jitter : Less than 1.0 UI
• Eye aperture ratio : More than 90%
• DC offset : 0 ± 0.5V
• Equalizer use 5C-FB cable support 100 meters
SD SDI signal Analog Y/C, Composite CCIR601 NTSC and PAL
Operating Temperature • 0°C to 40°C (32°F to 102°F)
Humidity • 10% to 90% (non condensing)
Dimension & Weight
Base Unit : 482mm (W) x 88mm (H) x 302mm (D) = 9 Kg
Control Panel : 699.4mm (W) x 143.89mm (H) x 436.6mm (D) = 10 Kg
Power • Input AC 100 ~ 240V Switching Adaptor, output DC 12V / 5A (48W)

45
Service and Support
It is our goal to make your products ownership a satisfying experience. Our support staff are available to assist you
in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to
common questions, support requests or contact your local office below.
Datavideo Global Website: www.datavideo-tek.com
Datavideo Corporation
Tel: +1 562 696 2324 Fax: +1 562-698-6930 E-Mail: contactus@datavideo.us
Datavideo Technologies Europe BV
Tel: +31-30-261-96-56 Fax: +31-30 261-96-57 E-Mail: service@datavideo.nl
Datavideo UK Limited
Tel: +44 1457 851 000 Fax: +44 1457 850 964 E-Mail: sales@datavideo.co.uk
Datavideo Technologies Co., Ltd
Tel: +886 2 8227 2888 Fax: +886-2-8227-2777 E-mail: service@datavideo.com.tw
Datavideo Technologies China Co., Ltd
Tel: +86 21-5603 6599 Fax:+86 21-5603 6770 E-mail: service@datavideo.cn
Datavideo Technologies (S) PTE Ltd
Tel: +65-6749 6866 Fax: +65-6749 3266 E-mail: sales@datavideo.sg
Datavideo HK Ltd
Tel: +852 2833 1981 Fax: +852-2833-9916 E-mail: info@datavideo.com.hk
Datavideo France s.a.r.l.
Tel: +33 1 60 37 02 46 Fax: +33 1 60 37 67 32 E-mail: info@datavideo.fr
Datavideo Technologies India PVT Ltd.
Tel: +91 120 4309120 Fax: +91 120 4309121 E-mail: sales@datavideo.in
All trademarks are the properties of their respective owners.
Datavideo Technologies Co., Ltd. All rights reserved 2012.
Rev Date: 31/10/2012 P/N: G082060591E1

Datavideo SE-2800 user manual

More Related Content

What's hot (17)

Viewers also liked (11)

Similar to Datavideo SE-2800 user manual (13)

More from AV ProfShop (20)

Recently uploaded (20)

Datavideo SE-2800 user manual