decimals-comp-packet.pdf

DECIMAL
COMPETENCY
PACKET
Developed by: Nancy Tufo
Revised: Sharyn Sweeney 2004
Student Support Center
North Shore Community College

3
In this booklet arithmetic operations involving decimal numbers are
explained. If you have not already reviewed the Fraction booklet,
please do so before working through this one.
Calculators are not allowed when taking the Computerized
Placement Test (CPT), nor in Fundamentals of Mathematics, Pre-
Algebra, and Elementary Algebra; therefore, do not rely on a calculator
when working the problems in this booklet.
To use this booklet, review the glossary, study the examples, then
work through the exercises, and check your answers at the end of the
booklet. When you find an unfamiliar word, check the glossary for a
definition or explanation. The last several pages are Place Value
Charts that will be helpful to you. Remove those pages for easier use.
If you have difficulty understanding any of the concepts, come to
one of the Tutoring Centers located on the Lynn, Danvers Main and
Danvers Hathorne Campuses. Hours are available at (978) 762-4000 x
5410. Additional Tutoring Center information can be found on the
NSCC website at www.northshore.edu/services/tutoring.
The Centers are closed when school is not in session, and
Summer hours are limited.

4
Table of Contents
Glossary 5
General Decimal Information 6
Place Value 7
Writing and Reading Decimals 8
Translating Numerical Expressions 9
Decimal Fractions 10
Comparing Decimals 11
Rounding 12
Addition 14
Subtraction 15
Multiplication 16
Multiplication by Multiples of 10 17
Division by Multiples of 10 18
Division by Whole Numbers 19
Division by Decimals 20
Converting Fractions to Terminating Decimals 21
Converting Fractions to Repeating Decimals 22
Converting Decimals to Fractions 23
Decimal Word problems 24
Answers 27
Place Value Charts 30

5
Glossary
Decimal or
Decimal Number
Any number that includes place value to the right
of a decimal point.
Decimal Point A dot or point that separates the decimal value
from the integral value of a number.
Denominator The bottom number of a fraction. It represents the
number of pieces needed to make one whole. (See
Fraction booklet for more information.)
Difference The result when two numbers are subtracted. The
order of subtraction is important. A – B means that
the number represented by B is subtracted from A,
that is A is the “top number” in a vertical
subtraction.
Digit The symbols 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 are the digits
of the Base ten number system.
Division Arithmetic operation:
Quotient
Divisor
Dividend =
÷
Expressed as a fraction: Quotient
Divisor
Dividend
=
or using a "division house"
quotient
dividend
divisor
Factor Each of the numbers that are multiplied, i.e. in the
product 7 x 9=63 the numbers 7 and 9 are factors.
Multiple A number which is the product of a given number
and another factor; Multiples are equal to or larger
than the given number, i.e. the multiples of 3 are:
3,6,9,12,15, …
Non-Repeating
Decimal
A decimal representation that has no pattern of
repetition in the digits after the decimal point.
Numerator The top number of a fraction. It represents the
number of pieces of a certain size considered for
the expression. (See fraction booklet for more
information)
Place Value The position a digit holds in a number. It tells us the

6
value of the digit. (See chart page 7)
Product The result when two numbers are multiplied.
Quotient The result when two numbers are divided.
Repeating
Decimal
A numerical representation that has a pattern of digits
that repeats to infinity. 0.323232… is a repeating
decimal, and can be written as 32
.
0
Sum The result when two numbers are added.
Terminating
Decimal
Every fraction can be written as a decimal by dividing
the denominator into the numerator if there no
remainder, the decimal will terminate.
Whole Numbers Positive numbers with no fractional or decimal portion.
General Decimal Information
♦ Our number system is a decimal system using the digits: 0, 1, 2, 3, 4, 5,
6, 7, 8, and 9, called the Base Ten Number System.
♦ Only positive numbers will be used in this booklet.
♦ Whole numbers are decimal numbers with no fractional part; a decimal
point is assumed to be to the right of the whole number. ( i.e., 15 = 15.0)
♦ Numbers with no whole number component will be written with a zero
preceding the decimal point. ( i.e., 0.23)
♦ Digits to the right of a decimal point represent fractional parts with a
denominator of a multiple of ten.
♦ Digits to the left of the decimal point are separated into groups of three
using commas.

7
Place Value
The position of a digit in a number reflects the "place value" of that digit. In
the following table, the number represented has value according to the place
the digit "1" holds in each case. (Note the use of commas.)
In the following chart, note the similarity of place value names on both sides
of the decimal. Those places to the right of the decimal end in "ths"
indicating that they are fractional.
Etc.
Ten
Millions
Millions,
Hundred
Thousands
Ten
Thousands
Thousands,
Hundreds
Tens
Units
(Ones)
Decimal
Point
(and)
Tenths
Hundredths
Thousandths
Ten-Thousandths
Hundred-Thousandths
Millionths
Ten
Millionths
Etc.
1, 0 0 0, 0 0 0 . 0 0 0 0 0 1
1 0 0, 0 0 0 . 0 0 0 0 1
1 0, 0 0 0 . 0 0 0 1
1, 0 0 0 . 0 0 1
1 0 0 . 0 1
1 0 . 1
1 . 0
0 . 1
In a spoken or written number, the word "and" reflects placement of a
decimal point. Although each number uses the same digits, (ones and
zeros), the value of each number in the chart above is very different. The
numbers, in order of the chart, are read:
one million and one millionth
one hundred thousand and one hundred-thousandth
ten thousand and one ten-thousandth
one thousand and one thousandth
one hundred and one hundredth
ten and one tenth
one and no tenths, or more commonly, one
one tenth
Whole Numbers Decimal Fractions

Writing Decimals
Place value is reflected when writing and reading decimal numbers in words.
In writing the decimal is represented by the word "and."
Example:
4.7 is written "four and seven tenths."
70.024 is written "seventy and twenty-four thousandths."
Write the following in words as you would write the number. (Use the
chart at the end of the booklet to aid with number placement.)
1) 20.15
2) 45.21
3) 15.196
4) 2,049.009
5) 0.005
6) 4.05
7) 278.54
8) 7.0007
9) 1.1
10) 1928.07

9
Translating Numerical Expressions
To translate written numerical expressions, place the last written number in
the correct place value.
Example:
Twenty and ninety-
six thousandths
20.096
20.096
Six, (6) the last digit belongs in the thousandths place.
(Third place to the right from the decimal point.)
Zero must be entered in the tenths place.
Write the following using digits. (Use a chart if needed)
1) four and five tenths
2) fourteen hundredths
3) one thousand nine hundred seventy-two ten thousandths
4) four hundred seven and three hundred twenty-eight thousandths
5) one tenth
6) seven and nine hundredths
7) one hundred seventy-two ten-thousandths
8) twenty-two and five tenths
9) twenty and four hundred ninety-six thousandths
10) three hundred and three hundredths

10
Decimal Fractions
A decimal number is another way to write a fraction with a denominator of
a multiple of ten, (i.e., denominators equal to 10; 100; 1,000; 10,000; etc.)
To convert a fraction with a denominator of a multiple of ten to a decimal,
read the fraction and write as a decimal number.
Example:
10
7
3
3.7
Example:
1000
234
15
15.234
Example:
100
5
0.05
is read " three and seven tenths"
expressed with digits
is read " fifteen and two hundred thirty-four
thousandths"
expressed with digits
is read " five hundredths"
expressed with digits. Note the zero placement.
Write as a decimal number.
1)
100
19
72
4)
10
3
1276
2)
1000
7
301
5)
100
6
1
3)
100
17 6)
1000
24

11
Comparing Decimals
To compare decimals, write the decimal numbers with the same number of
decimal places and decide which is larger.
Example:
Which is greater:
0.9 or 0.91?
0.90 ? 0.91
Example:
Write the following from
smallest to largest:
0.78006, 0.7845,
0.7851, 0.785, 0.78
0.78006, 0.78450,
0.78510, 0.78500,
0.78000
0.78000, 0.78006,
0.78450, 0.78500,
0.78510
To compare write both numbers with two decimal
places. Note zeros may be added or deleted from
the right and after the decimal point.
Compare digits in hundredths place. 1 is greater
than 0; therefore, 0.91 is greater. (hint: Consider
money)
Write the list adding zeros to hundred thousandths
place as needed.
Since the digits in the tenths and hundredths
places are the same, compare the digits in the
thousandths place first. Then compare the digits
in the remaining places.
Re-write the list from smallest to largest.
Write from smallest to largest:
1) 12.34, 1.234, 0.1234 5) 0.935, 1.2, 0.6, 0.56
2) 0.1, 0.01, 1.001 6) 0.12, 0.16, 0.2, 0.48, 0.054
3) 3.1, 0.031, 0.331 7) 5.038, 5.0382, 50.382, 0.5382
4) 0.06, 0.4, 0.9 8) 0.08, 8.08, 8.808, 8.888, 0.088, 0.8

12
Rounding
To round numbers for estimation:
1. Identify the place value to be rounded. All digits to the left of that place
remain the same.
2. Check the number to the immediate right of the place to be rounded:
a. If the digit in that place is 5 or greater, add one to the digit in
the place to be rounded.
OR
b. If the digit in that place is 4 or less, do not change the digit in
the place to be rounded.
3. Fill in the remaining place values to the right of the place to be rounded
with zeros, or drop the digits after the decimal point.
Example:
Round 1792 to the
hundreds place.
18 _ _
18 0 0
Example:
Round 73.64 to
the tenths place.
73.6 _
73.60 = 73.6
Example:
Round 49.897 to
the hundredths
place.
49. 8 1
0 _
49.(8+1) 0 _
49.90
Identify the place value to be rounded, (7 hundred).
Write the digit(s) to the left (1). Identify the number to
the right (9).
9 is greater than 5; add one to 7, (7+1=8), enter 8 in
the hundreds place.
Fill in all the places to the right with zeros.
Identify the place value to be rounded, (6 tenths).
Write the digits to the left (73). Identify the number to
the right (4).
4 is less than 5, 6 remains in the tenths place.
It is not need to fill in all the places to the right with
zeros; rounding to tenths place.
Identify the place value to be rounded, (9 hundredths).
Write the digits to the left (49.8). Identify the number
to the right, (7).
7 is greater than 5, add one to 9. Since 9 + 1 = 10, a
zero is entered in the hundredths place, and the 1 is
carried to the tenths place.
The 1 is added to 8.
The zero is needed to represent the hundredths place.

13
Round these numbers as indicated.
1) Tenths 62.87 9) Units 33.97
2) Units 14.45 10) Hundredths 49.995
3) Ten thousandths 3.56906 11) Thousandths 5.0074
4) Tenths 3.1416 12) Thousandths 0.6739
5) Hundreds 459.326 13) Tenths 1.98
6) Tenths 19.77 14) Ten thousandths 0.01704
7) Thousandths 0.0067 15) Hundredths 0.01011
8) Tens 389.88 16) Thousandths 0.0007

14
Addition
To add decimals, write the numbers vertically with the decimal points
directly under each other, then add the digits.
Note: When the decimal points are lined up, the digits are
automatically lined up in the correct place value.
Example:
13.2 + 1.57
13.20
+ 1.57
14.77
Example:
$437 + $41.56 + $0.18
$437.00
41.56
+ 0.18
$478.74
Write the problem vertically. Line up the decimal
points.
Note the additional zero. Adding zeros to the right
of the final digit after the decimal does not change
the value of the number.
Dollar values are the most familiar decimal values.
Write the problem vertically. Line up the decimal
points.
The additional zeros are optional, but help with
placement. Note dollar sign use.
Find the Sum (Add):
1) 0.03 + 0.4 6) 48 + 0.84
2) 0.3 + 0.03 + 0.003 7) 10 + 9.6 + 3.76 + 8.451
3) 2.05 + 0.561 + 43.9 + 17.32 8) $3.06 + $2.13 + $4.89
4) $4 + $14.01 9) 2,134.07 + 306.5 + 2.109
5) 8.0632 + 0.234 + 0.81 + 0.064 10) 56.3701 + 0.268 + 4.2

15
Subtraction
To subtract decimals, write the numbers vertically with decimal points
directly under each other, and add zeros when needed, then subtract the
digits.
Note: When the decimal points are lined up, the digits are automatically
lined up in the correct place value.
Example:
42.63 - 18.275
42.630
- 18.275
24.355
Example:
$23 - $0.13
$23.00
- 0.13
$22.87
Write the problem vertically. Line up the decimals.
Remember: always write the first number on the top.
Add zeros to the number with fewer places to the right of the
decimal point. Subtract.
Write the problem vertically. Line up the decimals.
Insert the decimal point and two zeros.
Subtract; borrow if necessary.
Find the Difference (Subtract):
1) 8.4 - 7.35 5) 4.355 - 1.647
2) 12.5 - 8.7 6) 60.54 - 0.928
3) $17.50 - $6.25 7) 89. - 58.46
4) $18 - $5.63 8) 104.003 - 21.78
Find the Sum and Difference as indicated, (in the order indicated):
9) 14.6 - 1.98 + 3.7 11) 0.19 + 2.34 - 1.003
10) 5.67 + 0.34 - 2.05 12) $21.90 - $0.45 - $ 2.34

16
Multiplication
To multiply decimals, write the problem and multiply as you would a
whole number multiplication problem. The product (answer) of two
decimal numbers has the same number of decimal places after the
decimal point as the total number of decimal places in the two numbers
being multiplied.
Example:
0.19 x 0.4
0.19
x 0.4
0.076
Example:
708
x 0.32
1416
21240
226.56
Write vertically. (The decimal points do not have to line
up.)
2 decimal places (Decimal points not lined up.)
+ 1 decimal place
3 decimal places
Count from right to left; add a zero before the decimal
point.
0 decimal places (Decimal points not lined up.)
+ 2 decimal places
2 decimal places
Count from right to left to place decimal point.
Find the Product (multiply):
1) 0.32
x 0.6
4) 5.048
x 2.03
7) 0.075
x 5.4
2) 1.9
x 0.05
5) 0.15
x 0.15
8) 99
x 1.1
3) 400
x 0.17
6) 2.4
x .013
9) 2.029
x 10.8

17
Multiplication by Multiples of 10
To multiply by a multiple of ten, move the decimal point RIGHT as many
places as there are zeros in the multiplier.
Example:
24.6 x 10
= 246.0
Example:
0.048 7 x 1000
= 48.7
Example:
24.6_ x 100
= 2,460.0
There is one zero in the multiplier (10); therefore, the
decimal point moves right one place.
There are three zeros in the multiplier (1000); therefore,
the decimal point movers right three places.
There are two zeros in the multiplier, (100); therefore, the
decimal point moves right two places. Note the
additional zeros.
Multiply:
1) 4.83 x 10 = 7) 35.961 x 100 =
2) 83.5 x 1000 = 8) 82.6 x 1000 =
3) 90.2 x 100 = 9) 7.007 x 100 =
4) 10.37 x 10 = 10) 72.953 x 10 =
5) 0.76 x 1000 = 11) 0.987 x 1000 =
6) 0.08 x 10 = 12) 476.098 x 10,000 =

18
Division by Multiples of 10
To divide by a multiple of ten, (10; 100; 1,000; etc.), move the decimal
point to the LEFT as many places as there are zeros in the divisor.
Example:
7 8.2 ÷10 =
= 7.82
Example:
_ _ _0.32 ÷ 1000
= 0.00032
There is one zero in the divisor (10), therefore the
decimal point moves left one place.
There are three zeros in the divisor (1000), therefore
the decimal point moves left three places.
Note the additional zeros.
Divide:
1) 82.5 ÷ 100 = 6) 78.567 ÷ 10 =
2) 923.8 ÷ 1000 = 7) 54.87 ÷ 1000 =
3) 0.754 ÷ 10 = 8) 20.35 ÷ 10 =
4) 0.845 ÷ 100 = 9) 540.8 ÷ 100 =
5) 63.8 ÷ 100 = 10) 6200 ÷ 10,000 =

19
Division by Whole Numbers
To divide a decimal by a whole number, place the decimal point in the
quotient directly above the decimal point in the dividend to ensure the
correct place value. Divide as with whole numbers.
Example:
5
5
.
5 ÷ = 5
.
5
5
1
.
1
5
.
5
5
Example:
3
5
.
22
= 5
.
22
3
5
.
7
5
.
22
3
Write the problem with a "division house," placing the
quotient's (answer's) decimal point directly over the
decimal point of the dividend.
A fraction is another way to express a division problem.
The divisor is the denominator and the dividend is the
numerator.
Write the problem with a "division house," placing the
quotient's (answer's) decimal point directly over the
decimal point of the dividend.
Divide:
1) =
÷ 6
8
.
1 4) =
÷ 4
264
.
0 7) =
÷ 5
32
.
0
2)
4
84
.
0 5)
9
96
.
3 8)
5
5
.
34
3)
8
096
.
0 6) =
÷ 2
016
.
0 9)
2
49
.
1
.
5
5
5
0
.
21___
1 5
1 5
0

20
Division by Decimals
In division, the divisor must be a whole number. To convert a decimal
divisor to a whole number, multiply the divisor and the dividend by a
multiple of ten. Then divide as usual.
Example:
4.9 ÷ 0.7
(4.9 x 10) ÷ (0.7 x 10)
49 ÷ 7 = 7
Example:
05
.
0
505
.
8
x
100
100
=
5
5
.
850
1
.
170
5
.
850
5
The divisor (0.7) has one decimal place. To
change the divisor to a whole number, multiply
the divisor and the dividend by 10.
Divide as usual.
The divisor (0.05) has two decimal places. To
change the divisor to a whole number, multiply
the divisor and the dividend by 100.
Divide as usual. Place the decimal point for the
quotient (170.1) directly above the decimal point in
the dividend (850.5)
Divide:
1) 7
.
0
0
.
574 ÷ 4) 7
.
2
1
.
35 ÷ 7) 03
.
0
8
.
82 ÷
2) 988
.
6
4
.
0 5) 04
.
77
4
.
2 8) 205
41
.
0
3)
2
.
1
0144
.
0 6)
011
.
0
132
.
0 9)
004
.
0
6832
.
0
5
35
35
00 5
5
0

21
Converting Fractions to Terminating Decimals
To convert a fraction to a decimal, divide. Some fractions will convert
to a decimal representation with a remainder of zero, called a
terminating decimal.
Example:
Convert to a Decimal
25
.
0
00
.
3
12
12
3
=
25
.
0
12
3
=
Example:
Convert to a Decimal
20
.
0
00
.
5
25
11
25
5
11 +
=
20
.
11
25
5
11 =
Divide 3 by 12.
The decimal equivalent to three twelfths is twenty-
five hundredths.
The whole number portion of the number will remain
the same. The fraction will convert to a decimal.
Divide 5 by 25.
The decimal equivalent to eleven and five twenty-
fifths is eleven and two tenths.
Convert to a Decimal:
1)
18
9 6)
40
19
2)
30
15 7)
32
48
3)
16
6 8)
20
2
5
4)
20
9 9)
40
7
77
5)
50
13 10)
50
37
47
24
60
60
0
50
0

22
Converting to Repeating Decimals
To convert a fraction to a decimal, divide. Some fractions will convert to a
decimal representation with pattern, called a repeating decimal.
Example:
...
666
.
0
...
000
.
2
3
3
2
=
6
.
0
...
666
.
0 =
Example:
...
0909
.
3
...
0000
.
34
11
11
34
=
09
.
3
...
0909
.
3 =
Divide two by three. Note that the remainder will
continue to be two; therefore, the decimal answer is a
repeating decimal.
Repeating decimals are written with a bar over the
repeating digits in the pattern.
Divide 34 by 11. Since 11 does not divide 10, there is a
need to bring down an additional zero. Note that there is
a portion of the quotient that does not repeat.
The bar indicates that only the 09 repeats.
Convert:
1)
11
1 6)
3
1
1
2)
33
1 7)
6
1
8
3)
9
4 8)
33
7
4)
3
1 9)
42
7
5)
22
3 10)
3
2
4
18
20
20
20
33
100
99
100
99
1

23
Converting Decimals to Fractions
To convert a terminating decimal to a fraction, write the decimal with the place
value multiple of ten as a denominator and reduce to simplest terms.
Example:
10
2
3
2
.
3 =
5
1
3
10
2
3 =
The decimal fraction portion of the number terminates in the
tenths place; therefore the denominator will be 10.
This fraction is not in lowest terms, therefore must be
reduced. Divide numerator and denominator by 2.
To convert a repeating decimal to a fraction, use a value of 9 as the
denominator.
Example:
09
.
3
99
9
3
=
11
1
3
99
9
3 =
The repeating pattern ends in the hundredths place,
therefore the denominator will have two nines, or be 99.
This fraction is not in lowest terms, therefore must be
reduced. Divide numerator and denominator by 9
Convert:
1) 85
.
7 6) 102
0
.
34
2) 3
.
10 7) 7
.
7
3) 08
.
2 8) 10.425
4) 45
.
0 9) 0.006
5) 360
.
0 10)
360
.
2

Word Problems
To solve a word problem, read the problem and express what you are trying to
learn in your own words. Identify the operation to be used, (addition,
subtraction, multiplication, or division). Translate the problem from words to
math symbols, (i.e. write an equation). Solve the equation.
Example:
Carlos bought one pair of shoes for $19.95, two neckties for $3.95 each, three
pairs of socks for $1.25 a pair, and one suit for $89.95. What was the total
cost?
Trying to learn total
cost of the items.
$ 19.95
7.90
3.75
+ 89.95
$121.55
Total cost usually implies addition.
One pair of shoes
3.95 x 2 Two neckties
1.25 x 3 Three pair of socks
One suit
Add with decimal points lined up.
Example:
Nora made 18 equal monthly payments on her new stereo set. If the total cost
of the set was $355.00, what was her monthly payment? (Round off to the
nearest cent.)
Trying to learn Nora's
monthly payment.
$355.00 ÷ 18
72
.
19
00
.
355
18
The monthly payment
is $19.72.
Total and number of months are given. Division is
implied
Total divided by number of months gives each
month's payment. The answer must be to the nearest
cent; that is rounded to the hundredths place.
Divisor is a whole number.
To continue the division, another zero may be added.
However, the next digit in the quotient will be a 2 and
by the rules of rounding, will not effect the current
quotient.
18
175
162
130
126
40
36
4

25
Solve the following.
1) The $146.35 cost of a party was shared by 10 people. How much did each
person have to pay? (Be sure to round your answer to the nearest cent.)
2) 537 people attended a $100 dollar a plate fund raising dinner for the NSCC
Foundation. How much money did this dinner raise?
3) At the beginning of the month, Jim's bank balance was $275.38. During the
month he wrote the following checks: $174.89, $68, and $57.76. He made
deposits of $250 and $350. Find his bank balance at the end of the month.
4) Rudy drove his car 9,600 miles last year. His total car expenses were $625
for the year. Find the average cost per mile. (Round off your answer to the
nearest hundredth)

26
5) A garden is 33.75 feet long and 21.6 feet wide. Draw a diagram of the
garden with the lengths written on all four sides. What is the total
distance around the garden?
6) A car traveled at 50 miles an hour for 2.5 hours. How far did it go?
7) A can of ham weighing 7.75 pounds costs $ 11.86. What does the ham
cost per pound? (Round to the nearest cent.)
8) A park is 4.6 miles long and 2.7 miles wide.
a. What is the total distance around the park?
b. If a racecar drove 50 times around the park, how far will it have to
go?

27
Answers to Exercises
Page 8 Page 9 Page 13
1. Twenty and fifteen
hundredths
2. Forty-five and twenty-one
hundredths
3. Fifteen and one hundred
ninety-six thousandths
4. Two thousand, forty-nine
and nine thousandths
5. Eight thousandths
6. Four and five hundredths
7. Two hundred seventy-
eight and fifty-four
hundredths
8. Seven and seven ten-
thousandths
9. One and one tenth
10.One thousand nine
hundred twenty-eight and
seven hundredths
1. 4.5
2. 0.14
3. 0.1972
4. 407.328
5. 0.1
6. 7.09
7. 0.0172
8. 22.5
9. 20.496
10. 300.03
Page 10
1. 72.19
2. 301.007
3. 0.17
4. 1276.3
5. 1.06
6. 0.024
Page 11
1. 0.1234, 1.234,
12.34
2. 0.01, 0.1,
1.001
3. 0.031, 0.331,
3.1
4. 0.06, 0.4, 0.9
5. 0.56, 0.6,
0.935, 1.2
6. 0.054, 0.12,
0.16, 0.2, 0.48
7. 0.5382, 5.038,
5.0382, 50.382
8. 0.08, 0.088,
0.8, 8.08,
8.808, 8.888
1. 62.9
2. 14
3. 3.5691
4. 3.1
5. 500
6. 19.8
7. 0.007
8. 390
9. 34
10. 50.00
11. 5.007
12. 0.674
13. 2.0
14. 0.0170
15. 0.01
16. 0.001
Page 14
1. 0.43
2. 0.333
3. 63.831
4. $18.01
5. 9.1712
6. 48.84
7. 31.811
8. $10.08
9. 2442.679
10. 60.8381

28
1. 1.05
2. 3.8
3. $11.25
4. $12.37
5. 2.708
6. 59.612
7. 30.54
8. 82.223
9. 16.32
10. 3.96
11. 1.527
12. $19.11
1. 0.825
2. 0.9238
3. 0.0754
4. 0.00845
5. 0.638
6. 7.8567
7. 0.05487
8. 2.035
9. 5.408
10. 0.6200
1. 0.5
2. 0.5
3. 0.375
4. 0.45
5. 0.26
6. 0.475
7. 1.5
8. 5.1
9. 77.175
10. 47.74
1. 0.192
2. 0.095
3. 68.00
4. 10.24744
5. 0.0225
6. 0.0312
7. 0.4050
8. 108.9
9. 21.9132
1. 0.3
2. 0.21
3. 0.012
4. 0.066
5. 0.44
6. 0.008
7. 0.064
8. 6.9
9. 0.745
1. 09
.
0
2. 03
.
0
3. 4
.
0
4. 3
.
0
5. 36
1
.
0
6. 3
.
1
Page 17 Page 20 7. 6
1
.
0
1. 48.3
2. 83,500
3. 9,020
4. 103.7
5. 760
6. 0.8
7. 3,596.1
8. 82,600
9. 700.7
10. 729.53
11. 987
12. 4,760,980
1. 820
2. 17.47
3. 0.012
4. 13
5. 32.1
6. 12
7. 2,760
8. 500
9. 170.8
8. 21
.
0
9. 6
1
.
0
10. 6
.
4

29
Page 23 Page 25-26
1.
20
17
7
2.
3
1
10
3.
25
2
2
4.
11
5
5.
25
9
6.
3333
34
34
7.
9
7
7
8.
40
17
10
9.
500
3
10.
111
40
2
1. $14.64
2. $53,700
3. $574.73
4. $0.07 per mile
5. 110.7 feet
6. 125 miles
7. $1.53 per pound
8. a. 14.6 miles
b. 730.0 miles
21.6 ft.
21.6 ft.
33.75 ft.
33.75 ft.

Place Value Chart
Hundred
Million
Ten
Millions
Millions,
Hundred
Thousands
Ten
Thousands
Thousands,
Hundreds
Tens
Units
(Ones)
Decimal
Point
(and)
Tenths
Hundredths
Thousandths
Ten
Thousandths
Hundred
Thousandths
Millionths
Ten
millionths
Hundred
Millionths
.
.
.
.
.
.
.
.

decimals-comp-packet.pdf

More Related Content

Similar to decimals-comp-packet.pdf (20)

More from Jorge Vega Rodríguez (20)

Recently uploaded (20)

decimals-comp-packet.pdf