Dynamics Kinematics Curvilinear Motion

Vector Mechanics for Engineers: Dynamics
Professor Nikolai V. Priezjev, Ph.D.
Tel: (937) 775-3214
Rm. 430 Russ Engineering Center
Email: nikolai.priezjev@wright.edu
Textbook: Vector Mechanics for Engineers: Dynamics,
Beer, Johnston, Mazurek and Cornwell, McGraw-Hill,
10th edition, 2012.

Kinematics: concerned with the geometric aspects of motion
(do not take into account forces or moments)
Goal: relations between s(t), v(t), and a(t) for general
motion

SUMMARY OF KINEMATIC RELATIONS:
RECTILINEAR MOTION
• Differentiate position to get velocity and acceleration:
v = ds/dt (graph) a = dv/dt or a = dv/ds · ds/dt = v dv/ds
• Integrate acceleration for velocity and position:
• Note that so and vo represent the initial position and velocity
of the particle at t = 0.
Velocity:
 =
t
o
v
vo
dta(t)dv 
v
vo
=
s
so
dsa(s)dvvor  =
t
o
s
so
dtv(t)))ds
Position:

S-T GRAPH
Plots of position vs. time can be
used to find velocity vs. time
curves. Finding the slope of the
line tangent to the motion curve at
any point is the velocity at that
point (or v = ds/dt).
Therefore, the v-t graph can be
constructed by finding the slope at
various points along the s-t graph.
What about acceleration? a=dv/dt

EXAMPLE
Given: v-t graph for a train moving between two stations
Find: a-t graph and s-t graph over this time interval
Think about your plan to solve the problem!

EXAMPLE (continued)
Solution: For the first 30 seconds the slope is constant
and is equal to:
a0-30 = dv/dt = 40/30 = 4/3 ft/s2
4
-4
3
3
a(ft/s2)
t(s)
Similarly, a30-90 = 0 and a90-120 = -4/3 ft/s2

EXAMPLE (continued)
The area under the v-t graph
represents displacement.
Ds0-30 = ½ (40)(30) = 600 ft
Ds30-90 = (60)(40) = 2400 ft
Ds90-120 = ½ (40)(30) = 600 ft
600
3000
3600
30 90 120
t(s)
s(ft)

CURVILINEAR MOTION: RECTANGULAR COMPONENTS
Today’s Objectives:
a) Describe the motion of a
particle traveling along
a curved path.
b) Relate kinematic
quantities in terms of
the rectangular
components of the
vectors.
In-Class Activities:
• Reading quiz
• Applications
• General curvilinear motion
• Rectangular components of
kinematic vectors
• Concept quiz
• Group problem solving
• Attention quiz

APPLICATIONS
A roller coaster car travels down
a fixed, helical path at a constant
speed.
How can we determine its
position or acceleration at any
instant?
If you are designing the track, why is it important to be
able to predict the acceleration of the car?
x
z
y

POSITION AND DISPLACEMENT
A particle moving along a curved path undergoes curvilinear motion.
Since the motion is often three-dimensional, vectors are used to
describe the motion.
A particle moves along a curve
defined by the path function, s.
The position of the particle at any instant is designated by the vector
r = r(t). Both the magnitude and direction of r may vary with time.
If the particle moves a distance Ds along the
curve during time interval Dt, the
displacement is determined by vector
subtraction: D r = r′ - r

VELOCITY
Velocity represents the rate of change in the position of a
particle.
The average velocity of the particle
during the time increment Dt is
vavg = Dr/Dt .
The instantaneous velocity is the
time-derivative of position
v = dr/dt .
The velocity vector, v, is always
tangent to the path of motion.
The magnitude of v is called the speed. Since the arc length Ds
approaches the magnitude of Dr as t→0, the speed can be
obtained by differentiating the path function (v = ds/dt). Note
that this is not a vector!

ACCELERATION
Acceleration represents the rate of change in the
velocity of a particle.
If a particle’s velocity changes from v to v′ over a
time increment Dt, the average acceleration during
that increment is:
aavg = Dv / Dt = ( v′ - v ) / Dt
The instantaneous acceleration is the time-
derivative of velocity:
a = dv/dt = d2r/dt2
The acceleration vector is NOT, in general, tangent
to the path function!

RECTANGULAR COMPONENTS: POSITION
It is often convenient to describe the motion of a particle in
terms of its x, y, z or rectangular components, relative to a fixed
frame of reference.
The position of the particle can be
defined at any instant by the
position vector
r = x i + y j + z k
The x, y, z components may all be
functions of time, i.e.,
x = x(t), y = y(t), and z = z(t)
The magnitude of the position vector is: r = (x2 + y2 + z2)0.5
The direction of r is defined by the unit vector: ur = (1/r) r

RECTANGULAR COMPONENTS: VELOCITY
The magnitude of the velocity
vector is
v = [(vx)2 + (vy)2 + (vz)2]0.5
The direction of v is tangent
to the path of motion!
Since the unit vectors i, j, k are constant in magnitude and
direction, this equation reduces to v = vxi + vyj + vzk
where vx = = dx/dt, vy = = dy/dt, vz = = dz/dtx y z
•••
The velocity vector is the time derivative of the position vector:
v = dr/dt = d(xi)/dt + d(yj)/dt + d(zk)/dt

RECTANGULAR COMPONENTS: ACCELERATION
The direction of a is usually
NOT tangent to the path of the
particle.
The acceleration vector is the time derivative of the
velocity vector (second derivative of the position vector):
a = dv/dt = d2r/dt2 = axi + ayj + azk
where ax = = = dvx /dt, ay = = = dvy /dt,
az = = = dvz /dt
vx x vy y
vz z
• •• ••
•••
•
The magnitude of the acceleration vector is
a = [(ax)2 + (ay)2 + (az)2 ]0.5

CONCEPT QUIZ
1. If the position of a particle is defined by
r = [ (1.5t2 + 1) i + (4t – 1) j ] (m), its speed at t = 1 s is
A) 2 m/s B) 3 m/s
C) 5 m/s D) 7 m/s

EXAMPLE
Given:The motion of two particles (A and B) is described by
the position vectors
rA = [ 3t i + 9t(2 – t) j ] m
rB = [ 3(t2 –2t +2) i + 3(t – 2) j ] m
Find: The point at which the particles collide and their
speeds just before the collision.
Plan: 1) The particles will collide when their position
vectors are equal, or rA = rB .
2) Their speeds can be determined by differentiating
the position vectors.

EXAMPLE (continued)
1) The point of collision requires that rA = rB, so xA = xB
and yA = yB :
Solution:
x-components: 3t = 3(t2 – 2t + 2)
Simplifying: t2 – 3t + 2 = 0
Solving: t = {3  [32 – 4(1)(2)]0.5}/2(1)
=> t = 2 or 1 s
y-components: 9t(2 – t) = 3(t – 2)
Simplifying: 3t2 – 5t – 2 = 0
Solving: t = {5  [52 – 4(3)(–2)]0.5}/2(3)
=> t = 2 or – 1/3 s
So, the particles collide when t = 2 s. Substituting this
value into rA or rB yields
xA = xB = 6 m and yA = yB = 0

EXAMPLE (continued)
2) Differentiate rA and rB to get the velocity vectors.
Speed is the magnitude of the velocity vector.
vA = (32 + 182) 0.5 = 18.2 m/s
vB = (62 + 32) 0.5 = 6.71 m/s
vA = drA/dt = = [ 3i + (18 – 18t)j ] m/s
At t = 2 s: vA = [ 3i – 18j ] m/s
jyAixA. +
vB = drB/dt = xBi + yBj = [ (6t – 6)i + 3j ] m/s
At t = 2 s: vB = [ 6i + 3j ] m/s
.
•
.
•
rA = [ 3t i + 9t(2 – t) j ] m
rB = [ 3(t2 –2t +2) i + 3(t – 2) j ] m

CONCEPT QUIZ
1. The path of a particle is defined by y = 0.5x2. If the
component of its velocity along the x-axis at x = 2 m is
vx = 1 m/s, its velocity component along the y-axis at this
position is
A) 0.25 m/s B) 0.5 m/s
C) 1 m/s D) 2 m/s

PROBLEM
Given: A particle travels along a path described by the
parabola y = 0.5x2. The x-component of velocity is
given by vx = (5t) ft/s. When t = 0, x = y = 0.
Find: The particle’s distance from the origin and the
magnitude of its acceleration when t = 1 s.
Plan: Note that vx is given as a function of time.
1) Determine the x-component of position and
acceleration by integrating and differentiating vx,
respectively.
2) Determine the y-component of position from the
parabolic equation and differentiate to get ay.
3) Determine the magnitudes of the position and
acceleration vectors.

PROBLEM (continued)
Solution:
1) x-components:
2) y-components:
Position: y = 0.5x2 = 0.5(2.5t2)2 = (3.125t4) ft
Velocity: vy = dy/dt = d (3.125t4) / dt = (12.5t3) ft/s
Acceleration: ay = vy = d (12.5t3) / dt = (37.5t2) ft/s2
Velocity: vx = x = dx/dt = (5t) ft/s
Position: = => x = (5/2)t2 = (2.5t2) ft
Acceleration: ax = x = vx = d/dt (5t) = 5 ft/s2
••

x
dx
0

t
0
dtt5
•
•
Integration constant? x(0)=0, C=0

PROBLEM (continued)
3) The distance from the origin is the magnitude of the
position vector:
r = x i + y j = [ 2.5t2 i + 3.125t4 j ] ft
At t = 1 s, r = [ 2.5 i + 3.125 j ] ft
Distance: d = r = (2.52 + 3.1252) 0.5 = 4.0 ft
Acceleration vector: a = [ 5 i + 37.5t2 j ] ft/s2
Magnitude: a = (52 + 37.52)0.5 = 37.8 ft/s2
The magnitude of the acceleration vector is calculated as:

ATTENTION QUIZ
1. If a particle has moved from A to B along the circular path in
4s, what is the average velocity of the particle ?
A) 2.5 i m/s
B) 2.5 i +1.25j m/s
C) 1.25  i m/s
D) 1.25  j m/s
2. The position of a particle is given as r = (4t2 i – 2t j) m.
Determine the particle’s acceleration.
A) (4 i +8 j ) m/s2 B) (8 i -16 j ) m/s2
C) (8 i) m/s2 D) (8 j ) m/s2
A B
R=5m x
y

Dynamics Kinematics Curvilinear Motion

More Related Content

What's hot (20)

Similar to Dynamics Kinematics Curvilinear Motion (20)

More from Nikolai Priezjev (20)

Recently uploaded (20)

Dynamics Kinematics Curvilinear Motion