EAN.UCC Basic and Principal

General EAN.UCC Specifications Basics and Principles of the EAN.UCC System
January 2005 – Version 6.0 Section 1.0 - Page 1
© Copyright 1999-2005 EAN International and Uniform Code Council, Inc.
Section 1.0:
Basics and Principles of the EAN.UCC System
Table of Contents
1.1 Introduction..........................................................................................................3
1.2 EAN.UCC Company Prefix ..................................................................................4
1.2.1 Acquisitions and Mergers.............................................................................4
1.2.2 Partial Purchase.............................................................................................4
1.2.3 Split or Spin-Off .............................................................................................5
1.3 The Data Structures.............................................................................................6
1.3.1 Global Trade Item Number (GTIN™
)..............................................................6
1.3.2 SSCC (Serial Shipping Container Code)......................................................8
1.3.3 EAN.UCC Global Location Number (GLN)...................................................8
1.3.4 EAN.UCC Global Returnable Asset Identifier (GRAI) .................................9
1.3.5 EAN.UCC Global Individual Asset Identifier (GIAI).....................................9
1.3.6 EAN.UCC Global Service Relation Number (GSRN) ...................................9
1.3.7 Components of the Data Structures ..........................................................10
1.4 The Data Carriers...............................................................................................12
1.5 The Data Standard.............................................................................................13
1.6 The Areas of System Application.....................................................................15
1.6.1 Area 1: Identification of Trade Items..........................................................15
1.6.2 Area 2: Identification of Logistic Units ......................................................15
1.6.3 Area 3: Identification of Assets ..................................................................16
1.6.4 Area 4: Identification of locations ..............................................................16

1.6.5 Area 5: Identification of Service Relationships.........................................16
1.6.6 Area 6: Special System Applications.........................................................16
1.7 Automatic Processing of Decoded Data..........................................................17

1.1 Introduction
The EAN.UCC System originated in the United States and was established in 1973 by the Uniform
Product Code Council, now known as the Uniform Code Council, Inc.®
(UCC™
). The UCC adopted a
12-digit identification number, and the first ID numbers and bar code symbols in open trade were
being scanned in 1974. Following the success of this U.P.C. System, the European Article Numbering
Association, now known as EAN International, was established in 1977 to develop a compatible
system for use outside North America. The EAN System was designed as a superset of the UCC
System and principally uses 13-digit numbers. As a consequence of using certain bar code symbols
and data structures, the EAN.UCC System has expanded. Today full global compatibility is achieved
through the use of the GTIN Format, a 14-digit reference field in computer files that can store data
structures to ensure a trade item identification number is unique worldwide.
The EAN.UCC System provides for the use of unambiguous numbers to identify goods, services,
assets, and locations worldwide. These numbers can be represented in bar code symbols to enable
their electronic reading wherever required in business processes. The system is designed to
overcome the limitations of using company, organisation, or sector specific coding systems, and to
make trading much more efficient and responsive to customers.
These identification numbers are also used in Electronic Data Interchange (EDI). This document only
provides information about the EAN.UCC System’s Automatic Data Capture (ADC) standards. For
information about EDI, please refer to the EANCOM
®
manual, the EAN.UCC XML standards or the
appropriate national standard.
In addition to providing unique identification numbers, the EAN.UCC System provides for
supplementary information, such as best before dates, serial numbers, and batch numbers, which can
appear in bar code symbol form. Currently, bar code symbols are used as the data carriers, but other
technologies, such as radio frequency tags, might be added in the future. Changes take place only
after wide consultation and are subject to a significant migration period.
By following the principles and design of the EAN.UCC System, users can design applications to
process EAN.UCC System data automatically. The system logic guarantees that data captured from
EAN.UCC endorsed bar code symbols produces unambiguous electronic messages, and processing
can be fully pre-programmed.
The EAN.UCC System is designed for use in any industry or trade sector, and any changes to the
system are introduced so as not to negatively affect current users.
IDENTIFICATION STANDARDS
AUTOMATIC DATA CAPTURE
(ADC)
ELECTRONIC COMMUNICATIONS
(EDI)

1.2 EAN.UCC Company Prefix
The EAN.UCC Company Prefix is the part of the EAN International and Uniform Code Council (UCC™
)
data structures. It consists of an EAN.UCC Prefix, which is co-administered by EAN International and
the UCC, and a Company Number, which is assigned by an EAN Member Organisation or the UCC.
An EAN.UCC Company Prefix gives access to all the applications using EAN.UCC System identification
standards (e.g., identification of traded items or services, locations, logistic units, returnable containers).
The EAN.UCC Company Prefix is a component of each data structure described in Section 2.0 except for
EAN/UCC-8.
The normal requirements on the re-use of EAN.UCC Identification numbers apply to all organisations
at all times. The following additional guidelines apply when a company changes legal status as a
result of an acquisition, merger, partial purchase, split, or “spin-off”. EAN Member Organisation or
UCC may adapt the following guidelines if the law of the country makes it absolutely necessary.
Companies should notify their EAN Member Organisation or UCC of any legal status change, within
one year, to facilitate a smooth transition.
1.2.1 Acquisitions and Mergers
For the company being acquired, existing stocks on hand which are numbered before the acquisition
or merger, keep the same Global Trade Item Numbers™
(GTIN’s™
). Products that are produced after
the acquisition or merger may keep the GTIN allocated before the acquisition if the acquiring company
maintains the EAN Member Organisation membership.
A merger implies that someone has taken over a company and has assumed responsibility for the
company’s EAN.UCC Company Prefix, as well as, their assets and locations. Products that the
acquired company produced under its EAN.UCC Company Prefix can still be produced using the
same prefix after the merger, since the acquiring company has control of the acquired company’s
EAN.UCC Company Prefix. If it so desires, the acquiring company can label all acquired products
using their existing EAN.UCC Company Prefix. The importance of ensuring trading partners are
informed of any changes, in a timely manner, cannot be overemphasised. A company should be
careful when centralising the allocation of all numbers under one EAN.UCC Company Prefix, thus
changing the GTIN of the existing products, which are otherwise unchanged. Centralising the
allocation of all numbers under a single EAN.UCC Company Prefix should be an exception, as it
results in additional work and data file maintenance for customers.
1.2.2 Partial Purchase
If a company purchases a division of a company whose EAN.UCC Company Prefix is used in
divisions not purchased, then the acquiring company must change the GTIN’s for products in the
purchased division, as well as any related GLNs, within one year.
The rules concerning the use of the seller’s Global Trade Item Numbers™
(GTINs™
), and other
EAN.UCC Identification Keys, should be taken into consideration when drawing up the purchase
contract.
At the earliest opportunity, the buyer should phase in new numbers, from its own range of numbers,
for items whose brand name it has acquired. The buyer will be able to do this, for example, when
packaging is redesigned or reprinted.
If a company sells an asset to another company then the asset identifier should ideally be replaced by
another GIAI or GRAI within one year or be removed from the physical item.
During a company sale, and for four years following, the selling company must not reallocate the
original numbers to other items.

1.2.3 Split or Spin-Off
When a company splits into two or more separate companies it is necessary for each EAN.UCC
Company Prefix assigned to the original company to be transferred to only one of the new companies.
Any company left without an EAN.UCC Company Prefix will need to apply to an EAN Member
Organisation or the Uniform Code Council (UCC™
) to obtain one. The decision about which of the new
companies should take the original EAN.UCC Company Prefixes should be made in such a way as to
minimise the number of additional Global Trade Item Numbers™
(GTINs™
) required. The decision
should be part of the legal arrangements of the new companies.
It is not necessary for existing stocks of items to be renumbered. However, when any of the split or
spin-off companies has trade items that are numbered with an EAN.UCC Company Prefix that it no
longer holds, the company should renumber those items using its own EAN.UCC Company Prefix
when new labelling or packaging is produced. Customers should be notified well in advance of the
changes.
Split or spin-off companies that retain an EAN.UCC Company Prefix must keep a record of the GTINs
created that have been allocated to items they no longer own. They must not re-use these GTINs for a
period of at least four years after the company that split away owning those items last supplied goods
identified by those GTINs. Therefore, the company that did not retain the EAN.UCC Company Prefix
has to keep the company that now maintains it informed of the dates on which goods were last
supplied using that EAN.UCC Company Prefix or to guarantee a date by which the number change
will be made.

1.3 The Data Structures
The EAN.UCC System provides data structures for different applications. The application will
determine how the number is to be used, but regardless of application, each number must be used in
its entirety and not broken into constituent parts. The data structure guarantees worldwide uniqueness
within the relevant area of application.
1.3.1 Global Trade Item Number (GTIN™
)
The Global Trade Item Number™
(GTIN™
) is used for the unique identification of trade items worldwide.
A trade item is any item (product or service) upon which there is a need to retrieve pre-defined
information and that may be priced, or ordered, or invoiced at any point in any supply chain. This
includes individual items as well as all their different configurations in different types of packaging.
These data structures provide unique identification when they are right-justified in a 14-digit reference
field, called the GTIN Format (see Figure 1.3.1 – 5).
Figure 1.3.1 – 1
EAN/UCC-14 Data
Structure
Indicator GTIN™
of the Items Contained (Without Check Digit) Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14
Figure 1.3.1 – 2
EAN/UCC-13 Data Structure EAN.UCC Company Prefix Item Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13
Figure 1.3.1 – 3
UCC-12 Data Structure UCC Company Prefix Item Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12
Figure 1.3.1 – 4
EAN/UCC-8 Data Structure EAN.UCC-8 Prefix Item Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8

Figure 1.3.1 - 5
Data Structures GTIN Format*
T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14
EAN/UCC-14 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14
EAN/UCC-13 0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13
UCC-12 0 0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12
EAN/UCC-8 0 0 0 0 0 0 N1 N2 N3 N4 N5 N6 N7 N8
*T represents the position of each individual digit in a computer file format, N represents the position
of each individual digit in a given data structure, and 0 represents a filler digit.
Note: This format is used in business transactions, especially for Electronic Data Interchange (e.g.,
orders, invoices, price catalogues).

1.3.2 SSCC (Serial Shipping Container Code)
The SSCC is used for the unique identification of logistic units.
Figure 1.3.2 - 1
Extension
Digit
EAN.UCC Company Prefix Serial Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N18
Ni' represents a digit
1.3.3 EAN.UCC Global Location Number (GLN)
The EAN.UCC Global Location Number (GLN) is used to uniquely identify a physical, functional, or
legal entity.
Figure 1.3.3 – 1
EAN.UCC Company Prefix Location Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13
Note: The GLN uses the same structure as EAN/UCC-13 Identification Numbers for Trade Items,
but must be treated as a separate series of numbers.

1.3.4 EAN.UCC Global Returnable Asset Identifier (GRAI)
The GRAI is used to identify a reusable entity that is normally used for transport and storage of goods.
Figure 1.3.4 – 1
EAN/UCC-13 Data Structure
EAN.UCC Company Prefix Asset Type Check
Digit
Serial Number
(Optional)
0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 X1 variable X16
Ni' represents a digit and 'Xi' represents any character contained in Figure 3.A.3 – 1.
1.3.5 EAN.UCC Global Individual Asset Identifier (GIAI)
The GIAI is used to identify uniquely an entity that is part of the inventory of a given company.
Figure 1.3.5 – 1
EAN.UCC Company Prefix Individual Asset Reference
N1 ... Ni Xi+1 ... variable length Xj (j<=30)
Ni' represents a digit and 'Xi' represents any character contained in Figure 3.A.3 – 1.
1.3.6 EAN.UCC Global Service Relation Number (GSRN)
The GSRN is used to identify the recipient of services in the context of a service relationship.
Figure 1.3.6 – 1
EAN.UCC Company Prefix Service Reference Check
Digit
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N18

1.3.7 Components of the Data Structures
The EAN.UCC Prefix is a number with two or more digits, co-administered by EAN International and
the Uniform Code Council (UCC™
) that denotes the format and meaning of a particular Element String.
The main purpose of the EAN.UCC Prefix is to allow decentralisation of the administration of
identification numbers.
EAN.UCC Prefixes are shown in Figures 1.3.7 – 1 and 1.3.7 – 2
Figure 1.3.7 – 1
Synopsis of EAN.UCC Prefixes
EAN.UCC Prefixes Significance
000 - 019 UCC™
data structure*
02 EAN.UCC Variable Measure Trade Item identification for restricted
distribution
030 - 039 UCC data structure
04 EAN.UCC item numbering for restricted distribution within a company
05 UCC coupon identification
060 - 099 UCC data structure
100 - 139 EAN.UCC data using EAN/UCC-13 Data Structure
140 - 199 Reserve
20 - 29 EAN.UCC numbering for restricted distribution within a geographic region
300 - 969 EAN.UCC data structure
970 - 976 Reserve
977 ISSN standard numbering (serial publications)
978 ISBN standard numbering (books)
979 ISBN or ISMN standard numbering
980 EAN.UCC identification of Refund Receipts
981-982 EAN.UCC coupon identification for common currency areas
983 - 989 Reserved for further EAN coupon identification
99 EAN.UCC coupon identification
* Starting from EAN.UCC Company Prefix 00 00100 to avoid collision with EAN/UCC-8 Identification
Numbers. Note: EAN.UCC Company Prefixes 00 00000 and 00 01000 to 00 07999 have specific
application for Locally Assigned Codes (LACs) or Retailer Zero-Suppressed Codes (RZSCs). For
details, see Section 3.A.2.
Note: These prefixes all assume an EAN/UCC-13 Data Structure. When UCC identification numbers
are carried by UCC-12 (UPC) Bar Code Symbols, the prefixes 00 to 09 will appear as the
single figures 0 to 9.
1.3.7 – 2
Synopsis of EAN.UCC-8 Prefixes
EAN.UCC-8
Prefixes
Significance
0 Velocity Codes
100 - 139 EAN.UCC data structure
140 - 199 Reserve
2 EAN.UCC numbering for use within a company

300 - 969 EAN data structure
97 - 99 Reserve
The EAN.UCC Prefix and the Company Number jointly form the EAN.UCC Company Prefix, which is
assigned to each system user by an EAN Member Organisation or the UCC.
EAN.UCC Company Prefixes are assigned to entities that administer the allocation of the EAN.UCC
System identification numbers. These entities may be, for example, commercial companies, non-profit
organisations, governmental agencies, and business units within organisations. The criteria to qualify
for the assignment of an EAN.UCC Company Prefix are established by the EAN Member
Organisations and the UCC.
The Item Reference, Serial Reference, Location Reference, Individual Asset Reference, Service
Reference, and Asset Type are assigned by system users. Rules for their allocation depend on the
particular application. EAN/UCC-8 Identification Numbers are available from EAN Member
Organisations or the UCC.
The Indicator in an EAN/UCC-14 Identification Number allows each user to increase the numbering
capacity when identifying similar trade units in different packaging configurations.
The Extension digit is used to increase the capacity of the SSCC. It has the value 0 to 9 and has no
meaning.
The Check Digit is calculated as explained in Section 3.A.1. It is used to verify that the identification
number is correctly composed.
Note: The data structures guarantee unique identification within a particular area of application.
Although, for example, trade items may use the same number as locations, each system user
must be able to control how data is used according to the EAN.UCC rules.

1.4 The Data Carriers
Bar code symbols are the data carriers used in the EAN.UCC System. Other data carriers may be
introduced in the future.
The data that comprises each identification number and any extra information that can be provided
using the EAN.UCC System Application Identifiers can be regarded as an Element String, and they
can all be represented in the bar code symbols endorsed by EAN International and the Uniform Code
Council (UCC™
). The EAN.UCC System uses the bar code symbologies described below.
The EAN/UPC Symbology (which includes the UPC-A, UPC-E, EAN-13, and EAN-8 Bar Code
Symbols as well as the two- and five-digit Add-On Symbols) is a bar code symbology family that can
be read omnidirectionally. It must be used for all items that are scanned at the Point-of-Sale and may
be used on other trade items.
Figure 1.4 – 1
EAN-13 UPC-A
0 12345 67890 5
The ITF-14 Bar Code Symbol (Interleaved 2-of-5) is restricted to use on trade items not passing
through the Point-of-Sale. This symbology is better suited for direct printing on corrugated fibreboard.
Figure 1.4 – 2
UCC/EAN-128 is a variant of Code 128. Its use is exclusively licensed by EAN International and the
UCC™
. This extremely flexible symbology is used for the representation of Element Strings using
EAN.UCC System Application Identifiers. It is not intended to be read on items passing through the
Point-of-Sale.
Figure 1.4 – 3
4 5 1 2 3 4 5 6 7 8 9 0 6 >
1 8 9 3 1 2 3 4 5 6 7 8 9 4
( 01) 04601234567893

1.5 The Data Standard
The EAN.UCC System provides various types of standardised data in the form of Element Strings. An
Element String is data of a particular structure and meaning that is represented in an EAN.UCC
System endorsed data carrier. It may be:
• An EAN/UCC-8, UCC-12, EAN/UCC-13, or EAN/UCC-14 Identification Number
• An EAN.UCC Prefix and data field(s) for special use with the EAN-13 or UPC-A Bar Code
Symbol in a particular environment
• An Application Identifier and data field(s)
A full string consists of the symbology identifier (see Section 5.0.3) followed by one or more Element
Strings. The symbology identifier is generated by the reading device and transmitted together with the
Element String(s). The symbology identifier ensures that systems distinguish between EAN.UCC
System data structures and other non-EAN/UCC System data structures. Figure 1.5 – 1 shows how
Element Strings are incorporated in the full string transmitted from a bar code reader to the
appropriate software.
Figure 1.5 – 1
Symbology identifier Element String
(represented in the scanned data carrier)
Application Identifier Data field(s)]C1 (UCC/EAN-128)
]E0 (EAN-13, UPC-A,
UPC-E)
]I0 (ITF-14)
EAN.UCC Prefix Data field(s)
Data field
Transmitted Full String
Note: The full string may contain several Element Strings.
]E4 (EAN-8) Data field
Data field

Each Element String, whether consisting of one or several data fields, will have unique meaning,
because it is unambiguous and does not depend on other read or stored data, or human intervention.
Element Strings must not be used for purposes other than those assigned to them, or this uniqueness
will be lost.
The Element Strings of the EAN.UCC System will be used mainly for recording transactions in goods
handling and business applications. Some Element Strings will be applied for administrative purposes
in specific environments (e.g., hospitals). The use of specific Element Strings in system applications is
subject to standards and recommendations. Their logical association is described in Sections 4.0 and
7.0.
The Element Strings are composed of an Application Identifier and one or more data fields. The
Application Identifier denotes the content and structure of the respective data fields. Full details are
contained in Section 3.0. The meaning of the Element Strings is determined by a sequence of checks
carried out on the information in the transmitted full string (see Figure 1.5 – 2). See Section 5.0 for
details on symbology identifiers.
Figure 1.5 – 2
Figure 1 - 1
* For Application Identifiers (01) and (02), the digit 9 in the first position indicates a Variable Measure
Trade Item (see Section 2.1).
3rd Check on first position of data field
Analysis of the Significance of an Element String Represented in a Data Carrier
First check on
symbology identifier
Element String
Application Identifier Data field(s)If UCC/EAN-128 Symbol
Second check
Third check (conditional
*
) either
first position of data field and/or
length of data field
Data fieldIf EAN-8 Symbol
Second check
If ITF-14 Symbol Data field
Second check = length of data field
EAN.UCC Prefix Data field(s)If EAN-13, UPC-A,
UPC-E Symbol

1.6 The Areas of System Application
To ensure that Element Strings are used and interpreted correctly together, they must only be used in
the appropriate areas of application. In this way, each Element String will always have the same
meaning, enabling automatic processing.
Element Strings containing identification numbers provide unique identification within a particular area
of application. Each area of application must be distinguished within a database using qualifiers,
different fields, or even different files.
1.6.1 Area 1: Identification of Trade Items
A trade item is any item (product or service) upon which there is a need to retrieve pre-defined
information and that may be priced, or ordered, or invoiced at any point in any supply chain (see
Section 2.1). This definition covers services and products, from raw materials through to end user
products, all of which have pre-defined characteristics.
EAN/UCC-8, UCC-12, EAN/UCC-13, and EAN/UCC-14 Identification Numbers are all used to identify
trade items. These data structures provide unique identification when they are right-justified in a 14-
digit reference field, called the GTIN Format (see Figure 1.3.1 – 5). If the item is of variable measure,
its identity will need to be completed by measure information, or in some instances, price information.
Other variable information about trade items (e.g., production, packaging, expiration dates, lot
numbers, serial numbers) is also available as standardised Element Strings.
Each trade item is allocated a unique identification number, which remains the same as long as it is
being traded. The same identification number is used for all of these same items. The numbers must
be used in their entirety within computer systems and must not be used in parts.
1.6.2 Area 2: Identification of Logistic Units
Logistic units are units which store or transport any combination of trade items and which need to be
identified and managed through the supply chain (see Section 2.2). Each individual unit is allocated a
unique serial number, the SSCC (Serial Shipping Container Code), which must be different for every
logistic unit. Even if the logistic units contain identical trade items, they still require different SSCCs.
Attributes relating to logistic units (e.g., gross weight, outside dimensions) are also standardised
Element Strings. Standardised Element Strings are available to identify the contents of logistic units
that contain a single type of trade item.

1.6.3 Area 3: Identification of Assets
The EAN.UCC Global Returnable Asset Identifier (GRAI) or EAN.UCC Global Individual Asset
Identifier (GIAI) can be used to identify specific assets or types of assets within an asset register (see
Section 2.3).
1.6.4 Area 4: Identification of locations
The EAN/UCC-13 Data Structure is used to identify locations, and each location is given a unique
EAN.UCC Global Location Number (GLN) (see Section 2.4).
The identification of physical, functional, or legal entities is required:
• For EDI messages
• When providing transport information on logistic units
• To enable bar code symbol identification of actual locations (e.g., goods inward,
warehouse shelving)
1.6.5 Area 5: Identification of Service Relationships
The EAN.UCC Global Service Relation Number (GSRN) is used to uniquely identify a receiver of
agreed upon services from a particular service provider (See Section 2.5). The GSRN can identify the
user as a participant (or member) in a programme or scheme. However, it never constitutes a
person's personal identification number because it is always related to a given service arrangement.
1.6.6 Area 6: Special System Applications
Special system applications are standardised Element Strings that may be used for company internal
and special applications that are not covered by the main application areas (see Section 2.6).

1.7 Automatic Processing of Decoded Data
The purpose of entering data from a bar code scanner into a system is to record a transaction.
Transaction data are electronic messages that will be processed according to the meaning of the data
transferred. This is possible without any manual intervention.
Although each Element String has only one meaning, correct interpretation of the electronic message
depends on the type of transaction. This implies that the transaction type, although not part of the
EAN.UCC System standards, should be considered an integral part of EAN.UCC System data
processing. Consequently, the electronic message will be derived from:
• The transaction type
• The identification of the bar code symbol
• The data decoded from a bar code symbol, including the Application Identifier(s) or other
data identifier(s)
An Electronic Data Interchange (EDI) message has clearly defined components to enable automatic
processing, and in the same way, data from a bar code scanner forms a message with a pre-defined
structure. Such messages may simply identify an item, but some will also contain data that
supplements the identification.
In order to provide unambiguous and complete messages, it is necessary to define which Element
Strings are required to form a valid electronic message. Valid electronic messages are determined by
the systems components and by business practices (system user applications), which together
generate the system’s logic. System users assembling these electronic messages need an
unambiguous way of characterising the Element Strings, which do not have explicit Application
Identifiers.
The EAN.UCC System provides standardised data, which, when carried by EAN.UCC System bar
code symbols, can be captured, correctly analysed, and processed automatically. The steps in this
procedure are:
• The bar code reader reads the bar code symbol and transmits the full string of data to the
front-end processing program.
• The front-end program breaks the full string into Element Strings and transmits them to the
analysing program.
• The analysing program assembles the Element Strings from one or more full strings, any
manually entered data, and the transaction information collected from the operator or
inferred, then validates the correctness of the set and transmits the set of data to the
application for processing.
• The application uses the transaction information, the Element Strings, and a database to
process the information correctly.
The above steps will be repeated as needed at each point in the supply chain.

This process is represented in Figure 1.7 – 1.
Figure 1.7 – 1
Note: In principle, all Element Strings provide their information independent of context. When the
Element Strings are shown in a bar code symbol applied to an item, the information in the
Element Strings is about the item itself. In this way, transactions about items can be recorded
as the items are scanned. When printed in a document (e.g., in a product catalogue), the
information enables the automatic entry of data for a business transaction, such as an order.
For example, the Element String AI (01) will be shown in the same bar code symbol whether
physically marked on an item or printed in a catalogue.
Scanned full string transmitted
to front-end program
Front-end program to verify
full string for complying with
the system rules and to break
it into single Element Strings
Assemble message and
validate completeness and consistency
Process message in
user application
Error
message
Failure
Failure
Note: A message may consist
of one or several Element
Strings
Transaction
information
Element String Element String Element String
Transaction type entered
by operator or inferred

EAN.UCC Basic and Principal

More Related Content

Similar to EAN.UCC Basic and Principal (20)

Recently uploaded (20)

EAN.UCC Basic and Principal