Edwards Signaling EGC-VM Data Sheet
0 likes202 views
This document provides information on Genesis series ceiling strobes from Edwards Signaling, including: - Standard features like field configurable light output settings and low-profile design. - Unparalleled performance from FullLight strobe technology that produces an even light distribution. - Installation details like fitting in standard electrical boxes and accessible wiring terminals. - Current draw specifications at different light output settings and voltages. - Agency listings and approvals, as well as ordering information for life safety appliance models.
Edwards Signaling EGC-VM Data Sheet
- 1. Page 1 of 4 D A T A S H E E T S85001-0557 Not to be used for installation purposes. Issue 7 Edwards Signaling Catalog u Strobes, Horns, Bells, Chimes Standard Features • Field configurable – no need to remove the device! – 15/30/75/95 cd and 95/115/150/177 cd clear strobe lens models available – Switch settings remain visible even after the unit is installed • Unique low-profile design – 30 per cent slimmer profile than comparable signals – Attractive appearance – No visible mounting screws – Available with white or red housings • Easy to install – Fits all standard 4” square electrical boxes with plenty of room behind the signal for extra wire – no extension ring or trim plate needed – #18 to #12 AWG terminals – ideal for long runs or existing wiring • Unparalleled performance – Exclusive FullLight strobe technology produces the industry’s most even light distribution – Precision timing electronics meet tough synchronizing standards for strobes – Low current draw minimizes system overhead • Approved for public and private mode applications – UL 1971-listed as signaling devices for the hearing impaired – UL 1638-listed as protective visual signaling appliances – UL/ULC listed for ceiling or wall use Overview Genesis life safety ceiling strobes are small, compact, and attrac- tive visible emergency signaling devices. Protruding no more than 1.6” (41 mm) from the ceiling, Genesis strobes blend with any decor. Thanks to patented breakthrough technology, Edwards Gen- esis strobes do not require bulky specular reflectors and lenses. Instead, an exclusive cavity design conditions light to produce a highly controlled distribution pattern. Significant development efforts employing this new technology have given rise to a new benchmark in strobe performance – FullLight technology. FullLight strobe technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consis- tent illumination from the strobe flash. As a result, Genesis strobes with FullLight technology go well beyond the minimum UL-required “cross” pattern, significantly exceeding UL-1971 and ULC-S526 light distribution requirements. Depending on the model, clear lens Genesis ceiling strobes fea- ture 15 to 95, or 95 to 177 candela output (see ordering informa- tion), which is selectable with a conveniently-located switch. The candela output setting remains clearly visible even after final instal- lation, yet it is locked in place to prevent unauthorized movement after installation. Genesis appliances offer emergency signaling with clear or amber lenses and with optional ALERT housing labels. They are ideal for applications that require differentiation between life safety and mass notification alerts. Field Configurable Ceiling Strobes Genesis Series One or more patents pending. MEA Pending
- 2. Page 2 of 4 D A T A S H E E T S85001-0557 Not to be used for installation purposes. Issue 7 Application Genesis strobes are UL 1971 or 1638 listed for indoor use. Prevailing codes require strobes to be used where ambient noise conditions exceed specified levels, where occupants use hearing protection, and in areas of public accommodation. Consult with your Authority Having Jurisdiction for details. All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. Synchronization for multiple strobe lights in a single field of view is required. Light output (effective cd) Percent of UL rating versus angle 0 10 20 30 40 50 60 70 80 90 100 110 120102030405060708090100110120 0° 15° 30° 45° 60° 75° 90° -15° -30° -45° -60° -75° Angle Percentage of rated output Horizontal and vertical outputs reflect the same pattern. 1.0" (25 mm) 6.8" dia. (173 mm) 0.60"(15 mm) Dimensions Installation All models are intended for indoor applications only. Strobes mount to any flush North-American 4” square electrical box, 21 /8” (54 mm) deep. Genesis ceiling strobes simply unlatch and twist to open. This gains access to mounting screws and the selectable candela switch. The shallow depth of Genesis devices leaves ample room behind the signal for extra wiring. Once installed with the cover in place, no mounting screws are visible. 95 75 15 30 Candela switch Indicator Field Configuration Depending on the model, Genesis ceiling speaker-strobes have multi-candela output (see ordering information). The output setting is changed by simply opening the device and sliding the switch to the desired setting. The strobe does not have to be removed to change the output setting. The setting remains visible through a small window on the front of the device after the cover is closed. WARNING:Thesedeviceswillnotoperatewithoutelectricalpower.Asfiresfrequently cause power interruptions, we suggest you discuss further safeguards with your local fire protection specialist. Wiring Field wiring terminals accommodate #18 to #12 AWG (0.75 mm² to 2.5 mm²) wiring. Strobes are interconnected with a single pair of wires as shown below.
- 3. Page 3 of 4 D A T A S H E E T S85001-0557 Not to be used for installation purposes. Issue 7 Current Draw Current values are shown in mA. Light output setting, standard models Light output setting, high output models UL Rating 15 cd 30 cd 75 cd 95 cd 95 cd 115 cd 150 cd 177 cd RMS RMS RMS RMS RMS RMS RMS RMS 16 Vdc 109 151 281 318 330 392 502 565 16 Vfwr 131 194 379 437 432 518 643 693 Light output setting, standard models Light output setting, high output models Typical Current 15 cd 30 cd 75 cd 95 cd 95 cd 115 cd 150 cd 177 cd RMS RMS RMS RMS RMS RMS RMS RMS 16 Vdc 94 140 273 325 333 392 499 551 20 Vdc 74 108 205 244 259 303 378 429 24 Vdc 63 90 168 194 212 245 306 342 33 Vdc 48 70 124 139 155 180 211 236 16 Vfwr 126 187 368 403 484 570 673 724 20 Vfwr 108 156 281 333 380 438 537 604 24 Vfwr 97 139 240 270 318 361 434 484 33 Vfwr 89 119 197 214 245 269 308 338 Specifications Housing Textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating. Red and white models available. Lens Optical grade polycarbonate (clear). Mounting Flush mount to North American 4-inch square electrical box, 2-1/8 (54 mm) inches deep. No extension ring required. Suitable for indoor wall or ceiling applications. Wire Connections Screw terminals: #18 to #12 AWG (0.75 mm² to 2.5 mm²) wire size. Operating Voltage Regulated 16 to 33 Vdc, 16 to 33 Vfwr. Operating environment Indoor: 32-120° F (0-49° C) ambient temperature; 0-93% relative humidity. Agency listings/approvals Meets or exceeds year 2004 UL requirements for standards UL1638 and UL1971 and Canadian requirements for standards CAN/ULC S526-02 and CAN/ULC S524-01. All models comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. CSFM, MEA. FM pending. Strobe output rating UL 1971, UL 1638, ULC S526: selectable 15/30/75/95 cd (EGC-VM) and 95/115/150/177 cd (EGC-VMH) Strobe operating voltage EGC-VM series strobes: non-coded, filtered 16-33 Vdc or unfiltered 16-33 Vdc FWR. Strobe flash rate EGC-VM series strobes: one flash per second synchronized with optional EG1M Genesis Signal Master indefinitely within 10 milliseconds. Temporal setting (private mode only): synchronized to temporal output of Genesis audible signals on same circuit. Synchronization Meets or exceeds UL 1971 requirements. Maximum allowed resistance between any two devices is 20 Ohms. Refer to specifications for the synchronization control module, this strobe, and the control panel to determine allowed wire resistance. Synchronization Sources EG1M-RM, EBPS6A, EBPS10A, E-NAC, E-FSC, E-FSA
- 4. Page 4 of 4 D A T A S H E E T S85001-0557 Not to be used for installation purposes. Issue 7 06-27-13 Contact us... Phone: 1-800-336-4206 Web: www.edwardssignaling.com Edwards Signaling is an EDWARDS brand. 3 Farm Glen Boulevard Farmington, CT 06032 In Canada, contact Chubb Edwards... Email: inquiries@chubbedwards.com Web: www.chubbedwards.com © 2013 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Specifications subject to change without notice. Edwards is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. Ordering Information Model Housing Marking Lens Strobe Ship Wt. Life safety Appliances (c/w running man icon screen printed on housing) EGC-VM White None Clear Selectable 15, 30, 75, or 95 cd 1.8 lb. (0.82 kg.) EGCF-VM White “FIRE” EGCFR-VM Red “FIRE” EGC-VMH White None Selectable high output 95, 115, 150, or 177 cdEGCF-VMH White “FIRE”