electr_hazrec analysis presentation documents
- 2. 2 Yes No employer shall permit a worker to work in such proximity to any part of an electric power circuit that the worker could contact the electric power circuit in the course of work
- 4. 4 Yes Crossing electrical line must be supported, protected or removed to safeguard workers
- 6. 6 Yes Spliced electrical extension cords. Extension cords should be marked DO NOT USE. Also, bad housekeeping, trip hazard and unprotected hole in photograph
- 8. 8 YES 1. No GFCI 2. System not grounded 3. Openings where conductors entered not closed 4. No cover on boxes 5. Panel boards were not dead front
- 10. 10 YES Electric drill flexible cord was spliced to a non-flexible conductor with damaged insulation
- 12. 12 Yes Scaffold was erected 4 ½ feet from 7.2 kV power lines
- 14. 14 YES Continuous path to ground not maintained; multiple cords used for fixed equipment
- 16. 16 YES Employer was operating a stand fan without grounding protection
- 18. 18 Yes Conductors entering boxes, cabinets, or fittings shall be protected from abrasion. Openings through which conductors enter shall be effectively closed
- 20. 20 Yes Flexible cords and cables may pass through doorways or other pinch points, if protection is provided to avoid damage